Used Cnc Multi Spindle Lathe for sale (27,015)

Condition: reconditioned (used), Year of construction: 1956, Lead and Feed Screw Lathe WEIPERT Year of manufacture: 1956 Spindle bore: 90 mm Centre distance: 3000 mm Swing over bed: 800 mm Swing over cross slide: 610 mm Swing in gap: 1120 mm Speed range: 7.5 – 475 rpm Comes with the following accessories: Multifix toolholder with 11 inserts Coolant system 3-jaw chuck 315 mm 3-jaw chuck 400 mm 3-jaw chuck 500 mm Faceplate 400 mm Faceplate 800 mm Faceplate 1000 mm Travelling steady Ijdpfx Asw Ew D Dohyeal Various turning tools (30 insert tools) 2 revolving centres 1 drill chuck Operating manual

Condition: good (used), Year of construction: 1996, Victor Vturn-20 CNC turning centre, 10 station tool holder, Fanuc Series 0-T CNC, swarf conveyor, fitted air bench, with Hydrafeed Multifeed MLI bar feeder, serial no. 2766 (1996) Ijdpeyahz Isfx Ahyeal

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: BE55324S, turning length: 300 mm, travel distance X-axis: 100 mm, travel distance Z-axis: 250 mm, total height: 2,200 mm, total length: 8,000 mm, total width: 2,000 mm, overall weight: 5,000 kg, controller manufacturer: FANUC, controller model: SERIES 18i-TB, MIYANO BNE 51 S CNC lathe - Operating voltage: 200/220 V - Frequency: 50/60 Hz - Connection load: 36 kW The machine is equipped with a main and counter spindle, each fitted with a HAINBUCH chuck, as well as a double turret, each with 12 tool stations. It also includes a bar feeder from BREUNING SIMAG, model: 42.1 R-3000. Iasdpfxjx T Aiue Ahyjl Attention: The item must be collected between 18 and 26 February 2026 on a date to be agreed upon. FCA D-78087 Mönchweiler – loaded onto truck

Condition: excellent (used), Year of construction: 2007, turning length: 1,545 mm, turning diameter over cross slide: 660 mm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, Make: MAZAK Type: INTEGREX 200-4 ST Control: MAZATROL MATRIX Year: 2007 Multi-Tasking Machining in a Single Machine Setup Iasdpfx Ahox S Hm Ieysl Sub spindle for overtaking with full C-Axis The INTEGREX IV series can finish all machining processes. High speed, advanced milling spindle that can tilt up to 240 degrees swiveling. Lower turret with rotary tool spindle so livew tooling Chip conveyor with coolant and 15 Bar iKZ Double chuck KNCS-N 210-53 SMW Autoblock MAZAK Flex -GL150F Gantry Loader Gripping range 200 x 120 length x 15 Kg Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1545mm B Axis: 270° Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:5000Rpm Subspindle bore: 65mm Subspindle power: 18.5kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm Length: 5200mm Width: 2550mm Height: 2600mm Weight: 14000kg

Condition: excellent (used), Year of construction: 2007, Mori Seiki NL2000Y/500 CNC Lathe (05/2007) Manufacturer: Mori Seiki Isdsx Tp N Ijpfx Ahysal Model: NL2000Y/500 Year of manufacture: 05/2007 Condition: used, very good, in operation Control: MSX-850II Optional with tooling and accessories.

Condition: ready for operation (used), Year of construction: 2010, This Hüttenhölscher Drilling rig was manufactured in 2010. It features a PC-controlled function sequence under Windows 7, TwinCAT, and a used drilling system with a 6-station loading gantry. The rig includes a 2-axis gantry robot, Y/Z axes with servo motors, and a travel distance of Y-axis 8500 mm, Z-axis 1500 mm. It also has a suction crossbeam with a four-circuit vacuum supply. Contact us for more information about this machine. Iaedpsx Tkausfx Ahyol Application Types Boring & Drilling (Wood)

Condition: ready for operation (used), additional equipment features: yes, Besturing: Siemens Sinumerik 840 C Siemens-aandrijving: 6SN1145-1BA00-OCAO Worklength with magnetic table: 1230 mm Worklenth without magnetic table: 1260 mm Grindingwidth: 600 mm Longitudinal travel X-axis (autom.): 1260 mm Iodpfoxuwxwox Ahyjal Cross-travel Y-axis (autom.): 630 mm Travel Z-axis (autom.): 477 mm Dimensions of the table: 1215 x 500 mm Distance between table -- spindlecentre: 680 mm Max dia grindingstone: 406 x 50 x 127 mm Spindlespeeds: rpm Motorpower: 22 kW Cooling system: yes

Condition: used, Year of construction: 2014, Technical details: turning diameter: 256 mm turning length: 455 mm swing diameter over slide rest: 260 mm travel -x axis: 198 mm travel -z axis: 508 mm turning speed range - main spindle: 4800 1/min power capacity - main spindel: 18 / 11 kW C-Axis: 0,01 ° turret (x-stations): 12 x VDI 30 Pos rapid power traverse in X-and Z direction: 19 / 24 m/min Iedpfsx Th Amsx Ahysal Number of driven tools: 12 Pos tool taper: VDI 30 Spindle speed driven tools: 5000 min -1 spindle hollow: 52 mm power capacity - driven tools: 4,4 kW total power requirement: 28 kVA weight of the machine ca.: 4.500 kg dimensions of the machine ca.: 2,9 x 2,3 x 2,2 m CNC lathe with tailstock, chipconveyor, hollow clamping cylinder, 3-jaw-chuck AUTO STRONG N 208, dia. 200mm, DXF, tooleye, Ultipockets, Synchronous threading, 3D Graphic, barloader ILS-BREUNING MUK 7012-III, Bj. 2017, accessories: incl. 2 pcs. live tools, incl. 34 pcs standard toolholders, hour meter: approx. 9.500h "machine on", approx. 2.000h "spindle on", approx. 300h "live tools on" *

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: B3170-0054, turning length: 700 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 290 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,200 mm, total length: 5,000 mm, total width: 2,000 mm, quill diameter: 100 mm, overall weight: 7,000 kg, controller manufacturer: FANUC, controller model: SERIES 21i-TB, number of slots in tool magazine: 12, HYUNDAI - KIA SKT 250 M CNC Lathe Iajdpox T Ac Uofx Ahysl - Operating voltage: 200/220 V - Frequency: 50/60 Hz - Rated current: 89 A - Connection: 27 kVA - Max. machining diameter: 410 mm - Max. swing diameter over cross slide: 480 mm - Chuck size: 254 mm - Spindle bore: 95 mm - C-axis: 0.001° - Includes tailstock, a HAINBUCH collet chuck, a 12-station tool turret with live tooling, and a chip conveyor Attention: The item must be collected by binding agreement between 18 and 26 February 2026, on a date to be coordinated. FCA D-78087 Mönchweiler – loaded onto truck

Condition: good (used), Year of construction: 2004, CNC lathe IRLE - IWDS 1000 CNC MACH-ID 7758 Make: IRLE Type: IWDS 1000 CNC Control: SIEMENS 840D Year: 2004 Double carriage with 4 position revolver and 840D Siemens Steady rest 200 - 1090 mm Roller rest 860 - 1090 mm 4 chuck 1350 mm Clamping from 200 - 1100 mm Bed width 2000 mm Isdpfx Ahspdp N Ioysal Stoke X Axis 950 mm Stroke Z Axis 14900 mm Specifications Metric US Standard Swing over bed Ø 1400 mm Swing over cross slide Ø 1100 mm DBC Turning Length 13000 mm Spindle power 129 kW Workpiece weight 20000 Speeds / ranges 1 - 300 Rpm Feed rate X-Axis 4500 mm/min. Feed rate Z-Axis 4500 mm/min. Dimensions (Estimate) Length 20000 mm Width 3380 mm Height 2200 mm Weight 100000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2008, Takamaz XY-2000 Plus CNC lathe (2008) Manufacturer: Takamaz Model: XY-2000 Plus CNC lathe Year of manufacture: 2008 Condition: Used, powered up and in production. 2x spindles (2x Hainbuch collet chucks) 2x tool turrets, each equipped Parts catcher Iajdpfxsx Ti Hge Ahysl Bar feeder Video available. Further information upon request.

Condition: good (used), Year of construction: 1998, 4196 GM 25: Bar feeder year 2001 / GM 25 year 1991 3330 AS 25: Isdex S E Svjpfx Ahysal Bar feeder year 2001 / GM 25 year 1969, completely overhauled in 1992 4423 GM 26: Bar feeder year 1998 / GM 26 year 1998 4283 GM 26: Bar feeder year 2000 / GM 26 year 1995

Condition: used, Year of construction: 2002, Tacchi HD-1450 CNC 725 x 4000 Heavy Duty Centre Lathe (2002) with Siemens Sinumerik 828D, 1000mm Diameter 4 Jaw Double Chuck, Chuck Bore Diameter 515mm, Barrufaldi Ban 400/4 4 Way indexing Tool Post (2) x 3 Point Steadies, Tailstock, Swarf Conveyor, Centre Height 725mm, Max Swing 1450mm Distance between Centres 4000mm, Main Motor 60kw, Max Workpiece Weight 15,000kg. Country of Origin: Italy Isdpfx Ahox T Ddaeyjal Location: This lot is located in Aberdeen, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Year of construction: 2012, Accessories included. CNC Control: Fanuc-18i-MB Working area X travel: 350 mm Z travel: 1600 mm C travel: 360° Isdsv Awlkopfx Ahyeal Swing diameter over bed: Ø 940 mm Max. standard turning diameter: Ø 366 mm (10-position standard turret) Maximum turning diameter: Ø 550 mm Maximum turning length: 1580 mm Spindle speed: 20 - 2000 rpm Chuck size: 15"/18" Spindle nose: A2-11 Spindle bore: Ø 130 mm Dimensions (LxWxH): mm Machine weight: 11,000 kg

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 500571, turning length: 800 mm, spindle bore: 100 mm, travel distance X-axis: 200 mm, travel distance Z-axis: 500 mm, total height: 3,300 mm, total length: 6,000 mm, total width: 3,000 mm, overall weight: 8,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK, INDEX G 300 CNC Lathe - Operating voltage: 400 V - Rated current: 80 A Iaodpfxjx Tz Snj Ahyel - Connection: 47 kW - Frequency: 50 Hz - Including a double turret each with a 12-station tool turret, as well as a tailstock and main spindle - Includes chip conveyor and two manuals, as well as a BÜCHEL manufacturer filter extraction system Note: The machine can be transported on a standard truck. Note: The item must be collected between 18 and 26 February 2026 on a binding, to-be-agreed date. FCA D-78087 Mönchweiler – loaded onto truck

Condition: used, Year of construction: 1999, turning diameter 450 mm turning length 380 mm control Seicos 40L Multi max. machining diameter 340 mm Bar feed 51 mm turning speed range - spindle 30 ~ 5.000 U/min drive capacity - spindle motor 11 / 7,5 kW Iedpfxsx S Rxuj Ahysal spindle nose A2-6 spindle bore 59 mm bearing diameter 100 mm travel -x axis 215 mm travel -z axis 400 mm turret (x-stations) 16 feed 0,001 ~ 500 mm/min rapid traverse X/Z: 30 m/min Shank diameter 25 x 25 mm Drill shank diameter 40 mm taper of center MK 5 tailstock adjustment 300 mm total power requirement 23 kVA weight of the machine ca. 4,6 t dimensions of the machine ca. 5,5 x 2,8 x 2,2 m CNC Lathe HITACHI SEIKI - HiTec-Turn HT 20 RIII

Condition: ready for operation (used), Year of construction: 2008, Nakamura Tome WT 250 CNC Lathe (2008) Manufacturer: Nakamura Tome Model: WT 250 CNC Lathe Year of manufacture: 2008 Condition: used, under power in production Control: Fanuc 18i 4 Axes: X, Y, C, Y Gantry Loader GR 203 2x Spindle 2x Turret (equipped) Further information available upon request. Iajdpfjx Tir Nsx Ahysl

Condition: good (used), Year of construction: 2013, CNC Swiss-type automatic lathe Make: STAR Model: SR-20R IV type B Year of manufacture: 2013 Ijdpsx Tf N Dofx Ahyoal with: FANUC 31i-B5 control Synchronous spindle Driven tools C-axis Programmable B-axis Y2-axis High-pressure pump Backworking unit Oil mist extraction Fire extinguishing system Bar feeder FMB TURBO 2-20

Condition: good (used), Weiler E70 Hollow Spindle CNC Lathe Year: 2003 Ijdpfx Aewmqkyshyoal Distance Between Centres: 2000mm Spindle Bore: 8" (200mm) Machine with: Front & Rear chucks Tailstock Fixed Steady

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 246, turning length: 900 mm, travel distance X-axis: 280 mm, travel distance Z-axis: 400 mm, total height: 2,700 mm, total length: 5,000 mm, total width: 2,000 mm, overall weight: 7,000 kg, controller manufacturer: TRAUB, controller model: SYSTEM TX 8H, number of slots in tool magazine: 12, TRAUB TNA 400 CNC Lathe - Operating voltage: 400 V - Frequency: 50 Hz - Connected load: 36 kW - Rated current: 70 A - Includes a tailstock and a HAINBUCH chuck, also equipped with a chip conveyor, TOOL EYE, and an additional chuck by FORKHARDT, diameter: 250 mm Iaedsx Tzx Iopfx Ahysl Note: The item must be picked up, bindingly, between 18th and 26th February 2026 on a date to be arranged. FCA D-78087 Mönchweiler - loaded onto truck

Condition: excellent (used), Year of construction: 2013, operating hours: 1,719 h, functionality: fully functional, feed length X-axis: 470 mm, feed length Z-axis: 2,040 mm, feed rate X-axis: 5 m/min, feed rate Z-axis: 10 m/min, turning diameter over cross slide: 650 mm, turning diameter: 1,030 mm, spindle bore: 375 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, overall weight: 23,000 kg, Okuma CNC Oil Country Hollow Spindle Lathe Model: LOC 650 Control: Okuma OSP P300L Year: 2013 Max Swing Over Bed: 1030mm Max Turning Dia: 650mm Iaedjxzgkiopfx Ahyel Spindle Bore: 375mm Spindle Speeds: 5-500 RPM Double Air Chucks 850mm Dia 12 Station Upper Turret Swarf Conveyor Coolant System

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: ML0177-000528, turning diameter: 230 mm, spindle bore: 76 mm, spindle speed (max.): 5,000 rpm, total height: 2,700 mm, total length: 11,000 mm, total width: 2,400 mm, overall weight: 10,000 kg, spindle nose: A2#6, bar diameter (max.): 65 mm, controller manufacturer: FANUC, controller model: SERIES 31 i-Model A, spindle torque (max.): 208 Nm, number of tool stations in tool turret 1: 12, number of tool stations in tool turret 2: 12, DOOSAN PUMA TT 1800 SY CNC Lathe - Operating voltage: 200/220 V - Frequency: 50/60 Hz - Connection load: 75.21 kVA - Rated current: 13 KA - Total connected load: 68.4 kVA - Maximum distance between spindle noses: 980 mm - Saddle swing: 230 mm - Recommended turning diameter: 210 mm - Maximum turning diameter on upper turret: 230 mm - Maximum turning diameter on lower turret: 230 mm - Maximum machining length (left and right spindle): 230 mm - Bar working diameter: 65 mm - Front spindle diameter: 110 mm - Boring bar diameter: 32 mm - Travel X1: 165 mm, X2: 190 mm - Travel Z1: 700 mm, Z2: 720 mm - Y-axis travel: 100 (+-50) mm - C1 and C2-axis travel: 36° (0.001°) Iaodpox Tzuisfx Ahyol - Rapid traverse X1 and X2 axes: 20 m/min - Rapid traverse Z1 and Z2 axes: 40 m/min - Rapid traverse Y axis: 7.5 m/min - Rapid traverse B axis: 40 m/min - Rapid traverse C1 and C2 axes: 600 rpm - Bed guideway span Z1 axis: 414 mm, Z2 axis: 339 mm - Guideway span X1 and X2 axes: 240 mm - Includes main and counter spindles, each equipped with a HAINBUCH chuck, as well as the tool holders shown in the photos - Includes FMB Turbo 5-55 bar feeder and LNS chip conveyor, year of manufacture: 2013 Attention: The item must be collected at a binding date to be agreed, between 18 and 26 February 2026. FCA D-78087 Mönchweiler – loaded onto truck

Condition: excellent (used), Year of construction: 2013, operating hours: 1,800 h, functionality: fully functional, turning diameter over cross slide: 650 mm, turning length: 1,750 mm, turning diameter: 650 mm, spindle bore: 375 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, travel distance X-axis: 470 mm, travel distance Z-axis: 2,040 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 10 m/min, Okuma CNC Oil Country Hollow Spindle Lathe Model: LOC 650 Iajdpfx Ahjxzi D Seyel Control: Okuma OSP P300L Year: 2013 Max Swing Over Bed: 1030mm Max Turning Dia: 650mm Spindle Bore: 375mm Spindle Speeds: 5-500 RPM Double Air Chucks 850mm Dia 12 Station Upper Turret Swarf Conveyor Coolant System

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: M303004, turning length: 780 mm, total height: 2,700 mm, total length: 5,000 mm, total width: 2,700 mm, overall weight: 12,000 kg, controller manufacturer: FANUC, controller model: SERIES 18 i-TB, NAKAMURA-TOME WT-300 CNC Lathe - Operating voltage: 200/220 V - Frequency: 50/60 Hz - Main circuit breaker: 300 A - Transformer: 93.4 kVA - Max. diameter (upper side): 199 mm - Max. diameter (lower side): 270 mm - Distance between spindle heads: max. 1100 mm / min. 250 mm - Max. bar capacity: 102 mm (left side), 65 mm (right side) - Chuck size (left side): 305 mm, (right side): 210 mm - Turret force (X-axis) X1: 11,000 N, X2: 11,000 N - Turret force (Z-axis) Z1: 9,000 N, Z2: 6,000 N - Turret force (Y-axis): 6,000 N - Travel X1: 152 mm, X2: 195 mm - Travel Z1 + Z2: 780 mm - Y-axis travel: ±40 mm - B2 axis travel: 850 mm - Spindle speed: 2,500 rpm - Spindle bore: 120 mm - Front bearing inner diameter: 160 mm - Draw tube bore: 103 mm - Spindle center height: 1,228 mm - Spindle speed R: 4,500 rpm - Spindle bore: 80 mm - Front bearing inner diameter: 110 mm - Draw tube bore: 66 mm - Spindle support: 2-point - C-axis - Rapid traverse speed: 600 rpm - Cutting feed rate: 1 - 4,800 °/min - Upper turret: 12-station turret - Number of tool stations: 24 - Number of turret indexing positions: 24 - Turret outer diameter: 406 mm - Turret thickness: 100 mm - Tool clearance: 641 mm - Turret clamping force: 30 kN - Tool dimensions: 20 and 25 mm - Internal turning tool mounting bore diameter: 25/32 mm - Lower turret type: 24-station turret Iajdpfx Aex Tzp Tehyol - Turret outer diameter: 365 mm - Turret thickness: 100 mm - Tool clearance: 600 mm - Tool dimensions: 20/25 mm - Driven tool spindles on upper and lower turrets - Spindle speed: 3,600 rpm - Number of spindle speed ranges: stepless - Number of tool positions: 12 - Toolholder types and sizes: longitudinal holder: 20, transverse holder - Thread cutting holder (longitudinal): M3 - M10 - Thread cutting holder (transverse): M3 - M10 - Cutting and feed speeds X1 and X2: 16,000 mm/min - Cutting and feed speeds Z1 and Z2: 27,000 mm/min - Cutting and feed speed B2 axis: 27,000 mm/min - Cutting and feed speed Y-axis: 6,000 mm/min - Feed rate X1 and X2: 1 - 4,800 mm/min - Feed rate Z1 and Z2 axis: 1 - 4,800 mm/min - Feed rate B-axis: 1 - 4,800 mm/min - Feed rate Y-axis: 1 - 4,800 mm/min - Including the tool holders visible in the photos as well as two HAINBUCH collet chucks in the main and counter spindle - Also includes chip conveyor and transformer - With documentation Note: The item must be collected by firm appointment between 18 and 26 February 2026, exact date to be agreed in advance. FCA D-78087 Mönchweiler – loaded onto truck

Condition: excellent (used), Year of construction: 2019, Model: Alpha 1460 XS Year: 2019 Swing Over Bed: 460mm Swing Over Cross Slide: 270mm Swing In Gap: 730mm Distance Between Centres: 1500mm Spindle Speeds: To 2200 RPM (Variable) Iodpfsxphv Nex Ahysal Spindle Bore: 78mm Machine With: 300mm 3 Jaw Chuck 8 Station Indexing Turret (VDI 30) Various Tooling