Used Cnc Plasma Cutting Machine for sale (66,740)

Condition: used, Year of construction: 2019, operating hours: 640 h, functionality: fully functional, Becky Job Master 6.20P CNC plasma cutting system Year of manufacture: 2019 Power source: Hypertherm XPR170 Machine software included, nesting software excluded Donaldson extraction system, 5.5 kW The machine is being sold due to the purchase of a laser cutting system. Dkjdpjz Dr Rdofx Ap Ieu

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs.  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch).  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support). Dksdpfx Astp Dhpsp Isu  Emergency stop with stop cord.  Year of build: 2013.

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) Dedpfjvpalajx Ap Ieku ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 289.112, sheet thickness (max.): 32 mm, overall weight: 3,000 kg, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, TECHNICAL DETAILS Travel range, X-axis: 3,000 mm Travel range, Y-axis: 1,500 mm Max. material thickness: 32 mm MACHINE DETAILS Drive system: CNC Control system: Beckhoff Dsdpez Ebclefx Ap Ioku Resonator manufacturer: Hypertherm Resonator type: Powermax 105 Connected power: 16.8 kW Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,400 x 2,200 mm Shipping weight: 3,000 kg Shipping packages: 1 unit EQUIPMENT Various accessories Spare parts Note: The machine is sold without a dust extraction system.

Condition: used, Year of construction: 2020, operating hours: 80 h, machine/vehicle number: pr5-3000-08200667, type of cooling: water, Equipment: documentation/manual, Swift-Cut Pro 3000 plasma cutting table. I have not personally operated this machine. The machine is in very good condition. It has been used for very few hours, and I would rate its condition as close to new. The set includes a Hypertherm Powermax 105 power source. Sold without warranty or guarantee. Dkodsz Ixzkopfx Ap Iou

Condition: new, Year of construction: 2026, NEW Plasma Cutting Machine. Dimensions: 3,000 mm x 1,500 mm Max. cutting thickness for steel: 22 mm Max. cutting thickness for stainless steel: 12 mm Dedpfsz Epctox Ap Isku Complete with CAD/CAM software. Data transfer in DWG and DXF formats via USB and network card. CE marking. ISO 9001, GB/T 19001. 120 A generator. The production cost is incredibly low, requiring only 5.5 kW and compressed air!

Condition: used, Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 3232, working width: 1,500 mm, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,500 mm, For sale is a MicroStep CNC cutting system from the MG series, model MG 6001.15PrkGB+CH500P, manufactured in 2022, with approximately 2,000 operating hours. Equipment: - Plasma rotator for weld preparation with Kjellberg Q 3000 plasma power source - Fully automatic oxy-fuel support - Fully automatic drilling spindle MG-40-P26 with 26.8 kW - Pipe cutting device RSV 30-300 - Filter system TEKA ZPF 6H with 11 kW Dkjdpfez A Tk Nsx Ap Isu Technical data: Working area approx. 6,000 x 1,500 mm + 500 mm clearance Max. travel height approx. 150 mm Max. table load approx. 100 mm Guideways in the X-axis: Linear guideways with helical gear racks Drives: Digital, maintenance-free AC servo motors with IRC Positioning speed up to 40,000 mm/min. Positioning accuracy ≤ 0.06 mm/m Bidirectional repeatability 0.05 mm/m Inspection: An inspection is possible at the location in Wörth a. d. Isar. Interested? The machine is offered in an online auction. Further information and documents are available upon request. Simply contact us!

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PLASMA CUTTING, Equipment: documentation/manual, The PROCUT model plasma cutting machine is designed to operate under all conditions. Its main advantage is a robust frame structure, making it suitable for heavy industrial use. Rails and frames are the most critical factors during the cutting process. They ensure that the machine remains stable and in good condition for a longer lifespan. It can be equipped with high-capacity power sources in sizes ranging from 1,500mm x 3,000mm up to 3,000mm x 12,000mm. All customer requirements can be integrated into the strong construction of PROCUT. This allows it to meet customer demands in the best possible way. Custom manufacturing in requested dimensions is possible, depending on your requirements and workspace. Dkjdpfoyzhl Dsx Ap Iju

Condition: new, Year of construction: 2026, functionality: fully functional, sheet thickness (max.): 350 mm, sheet thickness steel (max.): 20 mm, total width: 2,450 mm, total height: 2,350 mm, total length: 4,800 mm, cutting height (max.): 350 mm, workpiece weight (max.): 6,500 kg, warranty duration: 36 months, space requirement length: 3,150 mm, space requirement height: 5,000 mm, space requirement width: 2,450 mm, Equipment: documentation/manual, The Bluemotion HCP Series CNC Plasma is engineered for fabricators who demand precision, reliability, and ease of use. Designed and manufactured in Ireland, every HCP Series machine is built using premium industrial components and supplied with industry-leading Hypertherm technology as standard, delivering exceptional performance from the very first cut. Standard Features: - Hypertherm Edge® Connect CNC Control - Hypertherm ProNest® CAD/CAM Software Included - 350mm Gantry Clearance for processing sheet metal, 3D Profiles - Bosch Rexroth Linear Motion Components - Fully Servo Driven Axes with Servo Motors & Drives - Sealed Energy Chains for max. reliability in harsh workshop environments - Integrated Laser Pointer for fast and accurate plate alignment - Intelligent 3D Collision Detection to protect the torch and machine - Heavy-Duty Welded Steel Construction - Intuitive operation with a streamlined workflow from CAD to cut. - Comprehensive Commissioning & Operator Training Dsdpfozpzwmox Ap Ioku From importing a DXF into Hypertherm ProNest to producing finished components, the HCP Series has been designed to maximise productivity while remaining straightforward to operate. Whether you're producing one-off prototypes or high-volume production work, the HCP Series delivers the accuracy, speed and reliability modern fabrication businesses expect. Every Bluemotion machine is backed by expert technical support, professional installation, and ongoing after-sales service to ensure you get the maximum return on your investment. This price includes: - Hypertherm 85A SYNC Plasma Source (20mm Pierce Capacity) - 3-Year Full Machine Warranty Built in Ireland. Trusted by fabricators. Designed to perform.

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, Swift-Cut CNC Plasma Cutting Machine Type 1250 Dksdoy Snwnspfx Ap Iju with zone-controlled extraction table Technical Specifications: - Cutting area for sheet sizes up to 1250 x 1250 mm - Maximum gantry clearance height: approx. 100 mm - Lowered guide rails for easy loading - Gantry park position enables easy loading of full sheets from above - Robust welded steel frame with polyester powder coating - Lightweight cutting head for high cutting performance and easy maintenance - Linear guides with smooth-running V-rollers - Powerful 4 Nm stepper motors - Drive system: Coupled hybrid stepper motors. Dual synchronized rack and pinion drive (Dual Drive) on Y-axis. - Digital Torch Height Control (DTHC) – fast response time for improved cut quality and extended torch consumable life - Direct Cut Control (DCC): Automatic software control of cutting current (amperage) and air pressure directly via the CNC user interface (fully compatible ONLY with Hypertherm Powermax torch & plasma power supply) - Hypertherm plasma system error messages are displayed directly on the Swift-Cut control screen - Collision protection: Magnetic torch breakaway system. Shuts down the system within a fraction of a second in the event of a collision to prevent torch damage. - Proximity sensors for reliable and robust switching operations - Down draft extraction table - Zoned extraction table for efficient fume extraction - Easily removable cutting supports - Freestanding operator’s console with PC and flat panel LCD monitor - Wireless keyboard and mouse - Multiple emergency stop (E-stop) - USB and network connectivity Software: - Solid Edge CAD software - Swift-Cam 1 powered by Libellula; CAD/CAM software - Functions include conversion of any DXF files to Swift-Cut machine code - Manual nesting of parts and standard shapes - Pre-installed cutting tools and image library for consumable recognition - Part library with pre-made standard drawings - Swift-Cut CNC control software - Program simulation - Operating system: Windows 7 Included paid optional accessories: - Swift-Trace camera for capturing hand-drawn templates and converting them into DXF files - Swift-Marker unit – integrated pneumatic marking system. Automatic marking of text, bend lines, and center points - Hypertherm DuraMax plasma torch package Basic dimensions: Console: 650 x 550 mm Machine: 1900 x 1700 mm

Condition: used, Year of construction: 2012, CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: SPL-P 13501.30 Year of manufacture: 2012 Dkjdpfx Aez H I Auep Isu Working area: 3,000 x 13,500 mm 1 plasma torch with Kjellberg HiFocus 161i power source Automatic gas console 51026ä

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: M440104, input voltage: 400 V, input current: 2 A, input frequency: 50 Hz, Plasma cutting system CMS3 Plasma Wasp 300x150 cm Dkjdpfxoz A Uqqs Ap Isu including Viaduct software with Nitec Fiblo 4000 extraction system Inspection only by appointment! Collection only.

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Djdpszizkyjfx Ap Ijku Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: as good as new (ex-display), Swift-Cut CNC plasma cutting machine, type 1250Pro WT Dodey Sxvhjpfx Ap Ijku with water table and marking unit Cutting area 1250 x 1250 mm with ESAB power source Technical data: - Cutting area for sheet metal formats up to 1250 x 1250 mm - Table dimensions 1980 mm x 1840 mm - Table weight 800 kg - Table capacity 160 l - Height 1500 mm - Z-axis travel 130 mm - Max. load capacity 200 kg/m² - Traverse speed 20 m/min - Guides: Hybrid servo motors and double-sealed linear bearings on all axes. - Closed ball screw-driven Z-axis. Double-driven Y-axis. - Bridge clearance 150 mm - Max. material thickness 25 mm - Max. cutting capability for square tubes 100 mm - Required compressed air pressure 7-7.5 bar - Flow rate 300 LPM - Linear positioning accuracy 0.5 mm/m - Repeatability 0.4 mm/m - Measurement of roundness tolerance 0.3 mm/m FURTHER DETAILS AVAILABLE UPON REQUEST.

Year of construction: 2010, condition: ready for operation (used), Max. sheet dimensions: 6050x2550mm, max. cutting speed: 10m/min, length: 8125mm, width: 3800mm, height: 1900mm, with documentation, an on-site inspection is possible. Dkodpfx Apjri Skao Isu

Condition: new, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 60 mm, kaitec Smart – PROFESSIONAL CUTTING TECHNOLOGY FOR PROFESSIONALS With the highly economical plasma process, material thicknesses of up to 25 mm can be cut with optimal precision. Automatic initial height sensing, automatic arc regulation, and intelligent collision protection ensure maximum quality and the highest repeat accuracy. The automated program sequence and the long service life of consumables actively help to significantly minimize cutting costs. The oxy-fuel cutting process also impresses with its straightforward handling and functionality. Thanks to the automatic piercing function, preheating times and the supply of cutting oxygen are controlled by CNC. This allows plates up to 80 mm thick to be cut very cost-effectively. The oxy-fuel system is available for acetylene or propane gas and is equipped with automatic height control. kaitec Smart – WATER TABLE SYSTEM The foundation of the flatbed design is a stable water table. The longitudinal guide mechanism is mounted with high precision on machined surfaces. The robust cutting grate features staggered, serrated support slats, providing optimal support for sheets and reducing slag formation on workpieces, as well as excessive wear on the slats, ultimately saving substantial costs on rework and maintenance. The tank depth is precisely designed to accommodate slag and support its cooling, is easy to clean, and effectively captures dust generated during cutting. Dedpfx Apjx Ngn To Ieku Cutting area: 1,500 x 1,500 mm 1,500 x 3,000 mm 1,500 x 4,000 mm Material thickness Plasma: 1-25 mm Material thickness Oxy-fuel: 10-80 mm We look forward to hearing from you!

Condition: used, Year of construction: 2010, machine/vehicle number: VG6000 3224, Equipment: documentation/manual, Koike Versagraph 6000, including cutting tables. Excluding strips. Dedpfx Apszdz U Us Ieku The machine was fully functional until April 2022. It has been disassembled and stored since 2022. Original new price: 450,000 euros.

Condition: like new (used), Year of construction: 2018, operating hours: 700 h, functionality: fully functional, type of input current: AC, sheet thickness (max.): 60 mm, sheet thickness steel (max.): 60 mm, overall weight: 5,000 kg, workpiece weight (max.): 4,000 kg, cutting current: 200 A, KOIKE Gammatec 2040 – CNC Plasma Cutting Machine for Sale 📌 Manufacturer / Model: KOIKE Gammatec 2040 Dkedpfx Aeygk Sijp Iju 📆 Year of manufacture: 2019 📍 Location: Finland 💪 Powerful and precise CNC plasma cutting solution The KOIKE Gammatec 2040 is a heavy-duty industrial CNC plasma cutting machine, designed for high accuracy and reliable production. It is an excellent choice for metal workshops, fabrication companies, and industrial manufacturing environments. 📊 Technical specifications 📏 Cutting area (X × Y): 4,000 × 2,000 mm 🔪 Maximum cutting thickness: up to 60 mm 🌀 Number of torches: 1 🧠 Control system: CNC ⚡ Plasma system: Kjellberg HiFocus 🔌 Power requirement: approx. 2 kVA 📦 Machine dimensions: approx. 5,000 × 2,400 × 1,000 mm ⚖️ Machine weight: approx. 4,000 kg 📈 Key advantages ✅ Large cutting table (4 m × 2 m) – ideal for large metal sheets ✅ CNC-controlled precision for industrial production ✅ Proven KOIKE quality and robust machine design ✅ Suitable for continuous workshop or factory use 🛠 Condition 🔹 Used – very good condition The machine can be inspected and tested prior to purchase. Power source: Smart Focus 200 Mains voltage: 3 × 400 V, 60 Hz Cutting current: 35 – 200 A Marking current: 10 – 50 A Cutting range: Maximum: 60 mm Recommended: 1 – 10 mm Piercing: Maximum: 32 mm Plasma gases: O₂, Ar / H₂, N₂, Air Piercing gases: Ar, N₂ Dimensions (L × W × H): 1030 × 680 × 1450 mm Mass: 388 kg Plasma machine torch: PerCut 4000 Quick change head: PerCut 4000

Condition: used, Dimensions (LxW): 580 x 495 cm Selling price: CHF 1.000 (excl. BTW) New price indicational approx. 120.000 CHF With A-axis Saw blade tiltable: yes Laser guide: yes Worktable rotation: 360 degrees Worktable tiltable: yes Worktable dimensions lxw: 3700 x 2100 mm Connection: 400V Approx. bridge length: 5800 mm Approx. bridge width: 4950 mm Djdpfx Aoz D Tvbep Ioku Total approx. dimensions lxwxh: 5800 x 5300 x 3000 mm Online auction of best brands and modern stone sawing, cutting and processing machines (e.g. 2022 DONATONI, 2021 CNC INTERMAC PRIMUS, MASTER, MARMO MECCANICCA etc.), large stock of natural stone plates incl. marble, granite etc. and rolling stock (e.g. VOLVO XC60, MERCEDES VITO, FIAT etc.) originating from the bankruptcy of natural stones, marble, granite etc. processing firm Schär + Trojahn AG in Niederwangen near Bern in Switzerland. The online auction opens Tuesday 22 September and closes Thursday 15 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 13 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Year of construction: 2012, operating hours: 99,097 h, working height: 45 mm, power: 6.5 kW (8.84 HP), working length: 2,600 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Dkedpfx Asz Ekhdop Isu Maximum working length: 2,600 mm Maximum working height: 45 mm MACHINE DETAILS Installed total power: 6.5 kW Operating hours (according to the meter): 99,097 h The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6063

Condition: new, Year of construction: 2025, PLA-65A PLASMA CUTTER The machine, which is able to make fast, precise and high-quality cuts up to 25 mm, was specially developed for manufacturers of ventilation ducts, advertisers and customers using thin sheets. Together with the economic price, this machine CNC plasma cutting machines equipped with ergonomic functions have become an indispensable helper for customers in this matter industry. Technical data: Dkedpfx Apsfwmrpj Iou Hypertherm Powermax plasma source Power: 65A Max power consumption 11 kw Speed m / min 20 X / Y / Z 1500 3000 150 working area Weight: 1000 kg Loudness: 69 dB (A) Dimensions: Length: 3700 mm Width: 2200 mm Height: 1300 mm Equipment: Source - power hypertherm max 65A Controler CNC +THC PC computer

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, type of input current: three-phase, input voltage: 400 V, input current: 50 A, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2017 Control system: IMSNC Oxy-fuel cutting table: 3000 x 1500 mm Extraction duct left / right Plasma source: Kjellberg HiFocus 161i, adjustable 10 - 160 A Power source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control • Optimal process control with ultra-fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short circuit time during torch ignition, and power source • Operating status and error display via LED and screen • Analog and serial interfaces for adaptation to CNC controllers • Infinitely adjustable cutting current from 10 - 160 A and during marking from 5 - 25 A • Optimal piercing through infinitely variable delay time for the main arc and adjustable current rise • Adjustable current reduction for cornering, start, and end signals of the guidance system • Automatic display of the preset cutting current • Serial data transmission for PC-based diagnostics Plasma cutting technology: Contour Cut • Further development of HiFocus technology for mild steel • Optimized for cutting fine internal and external contours • High cutting quality and contour accuracy • Holes with angular deviations according to DIN EN ISO 9013 range 2-4 • Minimal angular deviations and smooth cut surfaces • Excellent repeatability and dimensional accuracy • No tedious post-processing – high productivity and low costs • No additional equipment, software, or new consumables required • Standard equipment Plasma torch PerCut 200/210 • PerCut 200 plasma machine torch for standard applications and high-precision bevel cutting • Quick-change PerCut 210 torch with threaded lock for quick and convenient tool swapping • Special torches available for special applications • Higher cutting speeds reduce cost per meter • Long service life of consumables conserves resources • Narrower kerf means fewer emissions and less waste • Significantly lower gas consumption compared to competitors thanks to efficient liquid cooling up to the nozzle tip • Lower noise levels due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Power source HiFocus 161i Power supply: 400 V; 3 Ph; 50 Hz Max. power input: 28 kVA (100% duty cycle) Main fuse, slow-blow: 50 A Protection class: IP22 Open circuit voltage: 330 V Cutting current: 10 – 160 A (100% duty cycle) Marking current: 5 – 25 A (100% duty cycle) Cutting range: Max. 50 mm Recommended: 0.5 – 38 mm Max. piercing thickness: 30 mm Dkjdoy Nd Hyepfx Ap Isu Weight: 206 kg Plasma machine torch PerCut 200 Quick-change torch PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, Air, N2/H2 (F5)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: COMBO (Plasma, Drilling, OXY-Fuel, Bevel), Equipment: CE marking, documentation/manual, * COMBO offers customers the most innovative technological solutions and features a wide range of models. * It is a highly advanced machine equipped with a 6- and 12-station automatic tool changer ISO 40 drilling system, offering capabilities such as drilling, tapping, countersinking, plasma cutting, OXY cutting, and ±45° bevel cutting. * The COMBO has a working range from 1,500 mm x 3,000 mm up to 4,000 mm x 24,000 mm and can be equipped with high-capacity plasma power sources. * Plasma Cutting * Drilling * Tapping * Countersinking * OXY-Fuel Cutting * Fully welded, heavy-duty machine frame. Dkodpfx Apeyy Rn Se Iju * High-durability cutting table designed for easy replacement. * Dual drive system with linear rails, rack and pinion. * Compliance with CE standards. ISO 40 Drilling System * 6-station automatic tool changer (optional 12-station). * CNC-controlled automatic coolant spraying system during cutting. * 26 kW spindle motor power. * Drilling capacity: Ø M5 to Ø M40 (HSS, UDRILL). * Drilling depth: 100 mm * Drilling speed: 0.15 – 0.35 mm/rev. * Spindle speed: 1,500 rpm * Hypertherm / Thermal Dynamics power sources. * Hypertherm / Eurosoft CNC controls. * Possibility to import .dxf and .dwg files via Pronest / Cut-Expert CAD-CAM.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: COMPACT, The COMPACT model plasma cutting machine is a machine model that protects your budget through lower investment and reduced costs, prioritizing reliability, user-friendliness, and compactness as its three main principles. The Compact is a valid solution for the needs of a wide market segment, offering an excellent cost/benefit ratio for anyone dedicated to sheet metal processing. COMPACT is characterized by a monoblock design with a compact layout, making it easy to transport and suitable for medium and small workshops. This system is ideal for high-capacity plasma power sources. The system comes equipped with an extraction filter and plasma power source, and it can be configured with various CNC and software options depending on customer requirements. The Compact can feature a working range between 1,500mm x 3,000mm and 2,000mm x 6,000mm. Djdpfx Ajyzm S Ajp Ieku

Condition: excellent (used), Year of construction: 2020, PLASMA CUTTING TABLE WITH COMPRESSED AIR: TYPE REMOCUT II 1500-3000/105A PNEUMATIC ENGRAVER Dedpfx Asyug Enjp Ioku