Used Cnc Rotary Table for sale (24,253)

Condition: like new (used), Kitagawa MR200 rotary table Condition: new, unused The table has been kept in storage and not used Itjdpsy H Ewnefx Ap Den

Condition: used, centre height / mm weight 110 kg diameter 400 mm Itedey Suqzopfx Ap Don

Condition: excellent (used), Year of construction: 2006, clamping force: 2,600 kN, ENGEL Victory 260 Combi – 2006 Manufacturer: ENGEL Model: VC650H/330W260 COMBI Year: 2006 Serial No.: 162803 Clamping Force: 260 tons (2,600 kN) Controller: CC200 Itsdjzu Smiepfx Ap Djn Opening Stroke: 908 mm Ejector Stroke: 200 mm Locating Ring: 160 / 125 mm Injection Unit 1: Screw Diameter: 40 mm Shot Volume: 251 cm³ Injection Rate: 106 cm³/s Max. Hydraulic Pressure: 180 bar Max. Injection Pressure: 1,929 bar Screw Stroke: 198 mm Injection Unit 2: Screw Diameter: 30 mm Shot Volume: 113 cm³ Injection Rate: 111 cm³/s Max. Hydraulic Pressure: 160 bar Max. Injection Pressure: 1,278 bar Screw Stroke: 158 mm Core Pullers: 2 (moving platen) Sequential Valve Gates: 4 Hot Runner Zones: 24 Rotary table Machine is including robot and conveyor belt Robot: Engel ERC 23/1-F machine is in excellent condition

Condition: used, Year of construction: 2022, turning speeds 0,7-9,0 U/min Torque 2,5-10 Nm table load capacity - central/maximum 50 kg welding current 400 A voltage 230 V Ijdpfozip Iysx Ap Dstn

Year of construction: 2006, condition: good (used), machine/vehicle number: 1607, Offer 22161 Technical data: - Load capacity 100 kg - face plate diameter 400 mm - face plate infinitely variable inclinable - table height at horizontal position approx. 470 mm - rotary movement electr. infinitely variable 0 - 2,5 m/min - welding current transmission 400 A - drive 400 V - right - left rotation Ijdpfx Apsnqzmnj Djtn - Foot switch with foot roller controller for speed regulation - ground cable - space requirement approx. W 700 x H 700 x D 600 mm - Weight approx. 100 kg

Year of construction: 2006, condition: good (used), machine/vehicle number: 1610, Offer 22163 Technical data: - Load capacity 100 kg - face plate diameter 400 mm - face plate infinitely variable inclinable - table height at horizontal position approx. 470 mm Iedpfxenqzp Ue Ap Detn - rotary movement electr. infinitely variable 0 - 2,5 m/min - welding current transmission 400 A - drive 400 V - right - left rotation - Foot switch with foot roller controller for speed regulation - ground cable - space requirement approx. W 700 x H 700 x D 600 mm - Weight approx. 100 kg

Condition: good (used), functionality: fully functional, Internal article number: 26090 Rotary table top Diameter: 380 mm Iedpez Hauvefx Ap Dstn Direct and indirect division possible Well-maintained original condition Minor milling marks on the surface, but these are not deep. The rotary table comes from an educational institution and is in a well-maintained condition.

Condition: good (used), Manufacturer: WMW Greiz Iodpfowxrhqex Ap Dstn TGL: 30-7103 Table number: 11742 Size: C 315 z Diameter: 315 mm Mounting surface: 400 x 350 mm Height: 150 mm Accessories/Equipment: Graduated table division 360°, rotatable Condition: good Weight: 69 kg Dimensions: 420 x 600 x 160 mm Indexing plate: 19 / 27 / 31 / 41 / 49 / 59

Condition: good (used), Horizontal-vertical rotary table with direct indexing, “MECA” design Table diameter: 320 mm Mounting: MK 3 Center height: 250 mm Table height, horizontal: 140 mm Weight, rotary table: approx. 70 kg Weight, tailstock: approx. 20 kg Accessories / Special features: • Horizontal and vertical • Indexing possible via scale drum and additionally via 24-step direct indexing 15° • Swivelable dividing worm for fast rotation • Tailstock Siegfried Volz Werkzeugmaschinen Itsdpfxjzyyx Rs Ap Den Rüschebrinkstr. 151-153 D – 44143 Dortmund - Wambel / Germany

Year of construction: 2006, condition: good (used), machine/vehicle number: 1608, Offer 17231 Iodpfx Apsnqzmcj Djtn Technical data: - Load capacity 100 kg - face plate diameter 400 mm - face plate infinitely variable inclinable - table height at horizontal position approx. 470 mm - Rotation electrically infinitely variable 0 - 2.5 m/min - welding current transmission 400 A - drive 400 V - right - left rotation - Foot switch with foot roller controller for speed regulation + - right - left rotation - ground cable - Space requirement approx. W 700 x H 700 x D 600 mm - weight approx. 100 kg - mounted on trolley approx. W 700 x H 150 x D 700 mm

Condition: new, Year of construction: 2025, 3D perforated table, 2000 x 1000 x 200mm, grid spacing 100mm, plate thickness 22mm, hole diameter 28mm. Surface treated, very sturdy, weight approx. 750 kg. Includes table base suitable for any standard accessories with a 28mm connection. Itodpfjw H Abkox Ap Dsn Price does not include accessories; accessories as shown are available at a special price of €500. Plasma nitriding: €800 extra (impact-resistant, scratch-resistant, rustproof). Shipping throughout Germany: €300.

Condition: used, Turntable, welding rotator, Bettinelli TR 210, Used machine Manufacturer: Bettinelli s.p.a. Italy Type: TR 210 Isdpfxsxxk H As Ap Detn Overall dimensions: Width: 950 mm Depth: 950 mm Height: 830 mm Electrical data: 400V; 1.1 kW; 5.9A; 900 rpm Table diameter: 950 mm

Condition: excellent (used), 1.- Plate size Ø 400 mm 2.- Centre bore 3.- Centre height 250 mm 4.- Working position Vertical Plate (horizontal axis) 5.- Load capacity (centred in the plate): * Horizontal Axis (Vertical Plate) 500 Kg * Vertical Axis (Horizontal Plate) 1.250 Kg * Vertical Axis with tailstock (Horizontal Plate) 1.250 Kg 6.- Round plate Ø 400mm fixed to the table´s saddle through a precision and combined THK type bearing, type RE25025 and a radial rigid one at the back. This offers a great rigidity to the table. Iedpfx Apshq Ukls Dotn 7.- Transmission by SPIRSIN gears in hardened steel. Ratio 90/1 Ref. 90-90/1-I 8.- Transmission between motor and pinion by pulleys and toothed belt. Ratio 48/36=1,333/1 9.- Total Ratio: 120/1 10.- Motor torque recommended (Type Alpha iF12/3000 HV): 12Nm 11.- Motor speed: 3.000 rpm 12.- Max. rotation speed: 25 rpm 13.- Hydraulic clamping system……………P = 50 bar. 14.- Clamping torque…………….3.800 Nm 15.- Pressure switch for clamp / unclamp signals confirmation. 16.- Maximum axial force…………….. 55.000 N. 17.- Tangential torque……………. 3.800 Nm. 18.- Tilting moment…………… 8.950 Nm. 19.- Equipped by a precision HEIDENHAIN encoder, type RCN 2390F, direct in the plate´s shaft. a. Positioning …………….. ± 5 seg b. Repeatability ……………. ± 1,5 seg 20.- Flatness of the plate turning 0,030 mm 21.- Squareness between the base and the plate …0,020 mm 22.- Concentricity of centre bore 0,010 mm 23.- Weight without motor (approx.) 380 Kg 24.- Indexing time (90°, include clamping/unclamping) …… 1,5 seg Indexing time (180°, include clamping/unclamping) …… 2,5 seg TECHNICAL DATA: TABLE SUPPORT SD.250.F/D.400-H 25.- Table support without transmission, free rotation. It will be rotated from the drive table (table B). 26.- Plate size: Ø 400 mm Prepared to receive and fix a special device developed by the client. 27.- Centre bore: Hole to centre the special device developed and decided by Dalian 28.- Eleven (11) fluid exits on the plate. They will be taken through the centre shaft of the plate. Entrances of the fluid at the rear of the table support. Threads 3/8 NPT. 29.- Centre height: 250 mm 30.- Working position:Vertical plate (horizontal axis) 31.- Load capacity (centred in the plate): * Horizontal Axis (Vertical Plate) 500 Kg * Vertical Axis with rotary table (Horizontal Plate) 1.250 Kg 32.- Round plate Ø 400mm fixed to the table´s saddle through a precision and combined THK type bearing, type RE25025 and 2 radial bearing. This offers a great rigidity to the table. 33.- Hydraulic clamping system……………P = 50 bar. 34.- Clamping torque…………….3.800 Nm This clamping fixed to the rotary table one, both would operate simultaneously 35.- Flatness of the plate turning 0,030 mm 36.- Squareness between the base and the plate … 0,020 mm 37.- Concentricity of centre bore 0,010 mm 38.- Weight without motor (approx.) 240 Kg NOTE: PRICE INCLUDES ROTARY TABLE + ENCODER + MOTOR

Condition: new, Year of construction: 2024, functionality: fully functional, input voltage: 400 V, overall weight: 250 kg, warranty duration: 12 months, input frequency: 50 Hz, Equipment: documentation/manual, type plate available, The SITEC ITVP500 is a tilting lathe with 1 axis, controlled by a Numerical Control system, designed for circumferential TIG and MIG welding of cylindrical stainless steel components. The machine guarantees high precision, repeatability, and ease of use, making it ideal for industrial production and high-quality machining. Key features: Maximum workpiece diameter: Ø 500 mm Maximum workpiece length: 500 mm Maximum load capacity: 100 kg Tailstock travel: 150 mm Workable material: Stainless steel Welding processes: TIG / MIG Variable speed spindle rotation: 0.1 – 12 rpm CNC Numerical Control with integrated PLC Programming and storage of welding cycles Pneumatic tailstock with two-hand closing system Torch adjustment slides for precise positioning on the joint Iodpfozlig Uox Ap Djtn High-rigidity, electrically welded steel structure Prepared for remote assistance and network connection Advantages: High welding precision Reduced setup times Simple and intuitive programming High repeatability of production cycles Ideal for series production and contract manufacturing Applications: The machine is suitable for circumferential welding of pipes, fittings, flanges, bottoms, manifolds, tanks, stainless steel components, and cylindrical parts for the food, pharmaceutical, plant engineering, chemical, and energy sectors. Customization: The machine can be configured with numerous optional features and accessories (motorized slides, AVC sensors, cold wire feed, brushless motors, rotary joints, cooling systems, and other dedicated solutions) to adapt to the specific production requirements of the customer. For further information, photographs, demonstration videos, and available configurations, please do not hesitate to contact us.

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.6 - 6.0 U/min bore 60.0 mm motor 230 Volt weight of the machine ca. 56.0 kg range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display Isdpfx Asxabm Njp Dstn

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg turning speeds 0.6 - 6.0 U/min spindle bore 60.0 mm swivelling range 0 - 90.0 Grad weight of the machine ca. 62.0 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off Iedpfx Apexaafqj Dotn - Control for turning time

Year of construction: 1980, condition: used, table length 2000 mm table width 1800 mm table load 12,5 t total power requirement 10 kW weight of the machine ca. 7,5 t dimensions of the machine ca. m Table size approx. 2,000 x 1,800 mm Max. weight of workpiece, approx. 12,500 kg Table travel, longitudinal 1,250 mm Table height above floor 920 mm Longitudinal feed 0.63 - 2,000 mm/min Turning feed, with Ø 1,000 mm 1 - 3,150 mm/min Longitudinal quick feed 2,000 mm/min Turning quick feed, with Ø 1,000 mm 3,150 mm/min Isdpfx Ast Hwq Rsp Dotn Weight of machine 7,500 kg External dimensions of machine 3,700 x 2,100 x 920 mm Total electrical load 10 KW - 180 V - 50 Hz Accessories / Special Features * Telescopic covers for the guides. * Infinitely variable table feed. * Optical display for setting and reading the longitudinal adjustment. * Optical display for setting and reading the angle. Condition : Satisfactory to good. Machine can be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest.

Condition: used, Technical details: table length: 2000 mm table width: 1700 mm table load: 15 t x-travel: längs=3000 mm table rotating: 360 motorisch ° Itsdou N D Sbspfx Ap Dsn height over floor: 1020 mm total power requirement: ca. 1,0 kw weight of the machine ca.: 14,2 t dimensions: 5,7x2,1x1,0 m The boring mill table was built in 1985 and overhauled in 2023 (retrofit) The table is mounted on a flat bed guide (5000x1380mm). The axis of rotation (B) is mounted hydrostatically, 9x T-slots according to DIN 650 and 508: a=28mm; h=54mm; b=51mm; c=21mm whose center distance = 160mm B-axis as positioning axis, which is clamped. *

Condition: used, Year of construction: 1969, rotary table diameter 1000 mm grinding height 500 mm grinding head - power requirement 15/5,5 kW total power requirement 30 kW weight of the machine ca. 18 t dimensions of the machine ca. m S I E L E M A N N (Germany) Hydraulic Rotary Table Internal and Face Grinding Machine with two grinding heads and with horizontal workpiece clamping Model RFsB 100 Year 1969 / fully reconditioned by the manufacturer in 1990 _____ Max workpiece Ø 1,000 mm Itsdpfx Asu Su Apsp Djn Max. height of workpiece, approx. 400 mm Mounting height under grinding spindles approx. 500 mm Grindable Bore Ø, approx. 50 – 900 mm Max. Workpiece weight approx.. 900 kg Distance between Table bore and column 1.150 mm Table Ø / Face plate Ø, approx. 1,000 mm Table speeds, hydraulic, infinitely variable, right/left 5 – 60 rpm Table/workpiece infeed, 5 steps 0.0025 – 0.025 mm/stroke Table stroke approx. 500 mm Distance between grinding spindle and machine body 600 mm Surface Grinding Head Ø (Segmented wheel) 450 mm Grinding slides stroke, max. 500 mm Grinding slide speeds, infinitely variable 0.2 – 1 m/m Max. Internal Grinding spindle Ø 140/100 mm Grinding cup wheel Ø, up to approx. 200 mm Motor for Surface Grinding 15 kW / Motor for Internal Grinding Spindle 5,5 kW Total electrical load, approx. 30 kW - 380 V - 50 Hz Weight, approx. 18,000 kg Accessories / Special Features • The rotary table carries the workpiece and is also actuating the automatic grinding infeed • The relevant Grinding head can be swivelled in by turning the Column (hydraulic lift) so the workpieces can be ground in one setting with exact angles. • Built-on magnetic face plate, Ø approx. 1,000 mm, with 5 T-slots and stepless adjustment for the magnetism • Automatic workpiece infeed, with automatic depth stop. • Separate Height adjustment of internal grinding head, Grinding spindle Ø 100 mm. • Dressing devices mounted on each grinding head, Separate Switch Cabinet and hydraulic unit, • No Coolant Device available This machine is ideal for grinding bulky and heavy workpieces like housings, gears (!) bearing rings, cylindrical knives, etc. Condition: Good. Machine can be inspected soon under power Delivery : Ex stock as inspected. Payment : Net, after conclusion of contract.

Condition: used, table diameter 315 mm workpiece weight 50 kg Itodpfx Apet Dqu Dj Djn centre height mm weight of the machine ca. 60 Kg dimensions of the machine ca. 0,4 x 0,4 x 0,2 m vertical rotary table, Height from assembly space to centre of disk = 500 mm

Condition: good (used), Year of construction: 2005, Offer 25238 Technical Data: - Max. load capacity with horizontal table top: 350 kg - Max. load capacity in all inclined positions: 300 kg - Faceplate diameter: 400 mm - Through hole / hollow shaft: 125 mm - Faceplate manually tiltable left + right: 0 - 90° - Rotational speed infinitely variable: approx. 0.15 - 5.0 rpm - Right and left-hand rotation - Electric foot switch - Welding current transmission: approx. 350 A - Drive: 400 V - Table height in horizontal position: approx. 900 mm - Required space: approx. W 1150 x H 900 x D 800 mm Itsdpfxewzigcj Ap Djn - Weight: approx. 290 kg - Chuck: 250 mm

Condition: used, Year of construction: 2000, table diameter 800 mm table load 1100 Kg swivelling range 360 Grad connected load frequency 400 V weight 3,5 t Dimensions (LxWxH) 2,8 x 1,2 x 2,4 m Welding positioner - consisting of a column with RDM 50 slewing ring Typ RDM50 - RDM 11 rotary table Typ RDM 11 Itsdpfx Apjzzd Tuo Djn - System without control cabinet

Year of construction: 1987, condition: used, machine/vehicle number: 6489; Lg-Nr. 13105, Technical data: - Maximum load capacity: 3000 kg - Turntable diameter: 1600 x 1600 mm - Turntable extension tubes Itjdpfobp Ddzox Ap Dsn - Turntable, motor-driven, swiveling: 0 - 90 / 135° - Steplessly adjustable rotary motion: 0.01 - 4 rpm - Controllable clockwise and counterclockwise rotation - Welding current transfer: approx. 500 A - Power supply: 400 V - Table height in horizontal position without base: approx. 1200 mm - Table height in horizontal position with base: approx. 2200 mm - Space requirement: approx. W 1600 x H 1200 + 1000 x D 2400 mm - Weight: approx. 2700 kg

Condition: used, machine/vehicle number: 006279, X axis working area: 3100 mm Y axis working area: 1250 mm Working Table: Flat table Number of controlled axes: 3 axes Itjdsz S T T Rspfx Ap Den Total number of drilling spindles: 11 Total number of tool changer positions: 8

Condition: as good as new (ex-display), 3000 kg welding rotator, hydraulically adjustable in height Speed: 0.05 to 0.6 revolutions per minute Table diameter: 1200 mm Tilt: 0 to 120° Total height adjustment: approx. 700 mm Height adjustment with the disk in a vertical position, measured to the center: 960 mm ~ 1910 mm Isdpfx Apsdvn E Us Dstn Dimensions with the disk in a horizontal position: 1200 mm to 1900 mm