Used Cnc Toolroom Milling Machine for sale (65,484)

Condition: used, Year of construction: 1989, Universal CNC Milling Machine MAHO MH 600 E2 Travel X: 600 mm Travel Y: 400 mm Fpjdpfxoz Nx Hqo Am Esp Travel Z: 450 mm Numerical Command CNC PHILIPS 432 Cone SA40 Spindle speed: from 20 to 4000 RPM Table size: 900 x 480 mm TravelSpindle sleeve travel: 80 mm Year of construction: 1989 1 lubricant tank Voltage: 380 V Width: 2500 mm Depth: 2400 mm Total height: 2000 mm Weight: approx 3,5 T

Condition: used, New 2013 Table size 1474 x 356 mm X axis 1016 mm Fpedpfxsyhdi Rs Am Ejp Y Axis 596 mm Z Axis 584 mm (Head Traverse) Spindle Speeds 40 – 5000 rpm & 40ISO 7.5 hp Spindle Drive. Max Table load 850 kg

Condition: like new (used), x-travel:300 mm y-travel:220 mm z-travel:400 mm surface area:620 x 390 mm turning speeds:31 - 3150 U/min Fsdpfx Ameh Ty Hko Ejpp feed range:1 - 3600 mm/min rapid traverse:4000 m/min

Year of construction: 1990, condition: used, Travels X/Y/Z: 500mm/400mm/350mm, rotary table diameter: 400mm, spindle taper: SK40, spindle speed: 5000rpm, additional quill travel: 50mm, tool positions: 16, control: Philips 432, machine operating hours: 13400h. Including electronic handwheel and retrofitted LED monitor. The machine was used in single-shift operation. Documentation available. Inspection possible by appointment. Fjdpfxsz Nwcqo Am Eepp

Condition: good (used), Year of construction: 2008, Siemens 840-D Machine equipped with water and oil cooling for deep drilling; deep drilling of D 80 mm x L 600 mm is possible. Travel ranges: Table traverse X-axis: 4,000 mm Drill head traverse Y-axis: 2,500 mm Drill spindle stroke Z-axis: 500 mm Cross beam stroke W-axis: 1,500 mm Working area: Free passage between columns: 3,250 mm Distance table – lower edge of drill spindle: max. 1,600 mm / min. 100 mm Table clamping surface: 4,250 x 2,500 mm T-slots: 12 pieces, 22 mm, spacing 200 mm Max. workpiece weight: 18,000 kg Speeds: Rapid traverse (positioning) X, Y, Z-axis: 10,000 mm/min Feed rate, stepless X, Y-axis: 1 – 2,000 mm/min Cross beam height adjustment: 300 mm/min Spindle feeds Z-axis: 1 – 2,000 mm/min, adjustable in 1 mm increments Performance data: Drive power drilling motor (S6-80 % duty cycle): max. 36 kW Fedozq Efdopfx Am Ejpp Spindle speeds: 41 steps, range 20 – 2,000 min⁻¹, step size 1.12 Tailstock diameter: 180 mm Drill spindle diameter in the front bearing: 100 mm Max. spindle torque: 840 Nm Max. drilling pressure: 40,000 N Spindle mount: SK 50 DIN 2079 Largest collet: SK 50 x MK 5 Tool draw-in force: 16,000 N Cutting performance in St 60 steel: Drilling through (spiral drill): 80 mm Reaming: 200 mm Thread cutting (in a balancing chuck): M 68 x 3 mm Milling (tailstock 1/3 extended): Cutter head diameter max. 200 mm (2/3 engaged), cutting depth max. 5 mm, feed rate max. 800 mm/min, milling performance 530 cm³/min.

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 470 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 160 mm, About Us Since 2014, we have been developing and producing our machines in Austria as a machine manufacturer. In addition to our standard machines, which can be individually customized, we are also able to offer special solutions. We will gladly send you our product catalog; simply contact us. Further information can be found at amt – machinetools . com Machine Frame ECO 532C CLEARANCE SALE – while supplies last Due to the further development of our machine series and the transition to the HSC 544, the remaining ECO 532 machine frames are being offered at an attractive clearance price. Travel range X 470mm (710mm with portal extension for tool changer) Y 330mm Z 160mm (longer travel range available upon request) Machine bed made of mineral cast - high rigidity - high vibration damping - high thermal stability - compact dimensions with a depth of approximately 660mm, allowing it to pass through very narrow doors during installation - weight approximately 400kg Guides and drive - Linear guides, size 20, on all axes - Ball screws with a diameter of 25mm on the X axis, diameter 20mm on the Y and Z axes Scope of delivery Machine frame including portal extension, fully assembled and calibrated. Includes: - Linear guides, ball screws and bearing units - Machine table - Z axis and cross plate The pictures show some optional accessories that are not included in the scope of delivery. For example, spindle, motors, guide rail covers, tool changer, cabin, etc. Numerous options and extensions are available. We will be happy to provide you with expert and comprehensive advice to offer you the perfect solution for your machining task. Fpsdpfsz N Alkjx Am Eop The offer does not include VAT. Delivery time and payment terms are subject to agreement.

Year of construction: 1992, condition: new, New ISO40 collet for FN 20/32/40 milling machines. Fpedek Nk I Nepfx Am Ejp

Condition: excellent (used), Year of construction: 2003, Sub-spindle, Y-axis, B-axis, C-axis SIEMENS 840D ShopMill Fodpfx Amoz Iaqgo Espp Turning diameter max 246mm Turning length -445mm Spindle speeds main & sub-spindle -6'000 rpm Turret head: 12 driven positions B-Axis 440 mm Tool presetting device Tool catching attachement Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), Control system: Siemens 840-D X-axis travel: 2000 mm Y-axis travel: 2000 mm Z-axis travel: 500 mm Fpedpozv Hxcjfx Am Eop Distance between columns: 2700 mm Max. working height: 1100 mm Table: 2250 x 2000 mm Workpiece weight: 10 tonnes Spindle power: 24 kW Spindle speed: 2250 rpm Tool holder: SK 50

Condition: like new (used), Year of construction: 2000, Retrofitted: 2026 Numerical control: NUEVO/NEW HEIDENHAIN TNC-i640 Fpedpsznpczefx Am Ejp Technical features Dimensions Table dimensions: 5600 x 2000 mmNumber of T slots: 13T slots dimensions: 22 mm Traverses of axis X axis traverse: 5000 mmY axis traverse: 3250 mmZ axis traverse: 1000 mmVertical capacity (VC): 500 / 1500 mmDistance between columns: 2700 mm Milling head Milling head model 1: UAGA orthogonal auto-indexing BC (2,5º)Tool clamping system: HydraulicTaper nose: ISO-50 (DIN69871)   /   Pull stud: (DIN69872)Speed range: 3000 rpmSpindle power: 30 kW Milling head model 2: FA large vertical spindleTool clamping system: HydraulicTaper nose: ISO-50 (DIN69871)   /   Pull stud: (DIN69872)Speed range: 3000 rpmSpindle power: 30 kW Milling head model 3: Direct spindleTool clamping system: HydraulicTaper nose: ISO-50 (DIN69871)   /   Pull stud: (DIN69872)Speed range: 5000 rpmSpindle power: 37 kW Feedrates Rapid feedrate (X / Y,Z): 7200 / 12000 mm/min Weight and dimensions Maximum weight on table: 25000 KgMachine weight approximate: 56000 KgMachine dimensions approximate: 13200 x 5738 x 5850 mm Accessories Guarding: 2 sliding doors and new perimetral wire-mesh fenceMilling head changer: Semi-automatic with hinges on columnAutomatic tool changer: OptionalChip conveyor: 1 transversal hinge typeElectronic handwheel: New HR-510Coolant: External internal high-pressure through spindle (only in direct spindle) Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, feed rate X-axis: 6,000 m/min, feed rate Y-axis: 6,000 m/min, feed rate Z-axis: 6,000 m/min, table width: 450 mm, table length: 1,530 mm, X-Axis: 650mm Y-Axis: 500mm Z-Axis: 475mm Table Length: 1530mm Table Width: 450mm Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Fedjxtmqtspfx Am Espp Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Length: 2300mm Width: 2550mm Height: 2200mm Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, CNC universal tool milling machine DECKEL, type FP 4 ME - DEFECTIVE Machine No. 2205, Year of manufacture 1989 CNC path control: GRUNDIG Contur 3 - Control system does not boot up Travel ranges: X: 485 mm, Y: 385 mm, Z: 380 mm Table size: 800 x 460 mm Spindle mount: ISO 40 Spindle speed: 63 - 3150 rpm, 22 steps Fodpfoz Ebvrsx Am Eopp Feed rate range: 2 - 3000 mm/min, stepless Quill movement: Horizontal and Vertical Main spindle drive: 3.7 / 4.4 kW - Hydraulic tool clamping - Swiveling control panel - Electronic handwheel - Fixed angular table - Coolant system in the machine base - Control cabinet located next to the machine, dimensions L x W x H: 800 x 750 x 1150 mm Space requirement L x W x H: 2000 x 2000 x 2000 mm Weight approx.: 2400 kg Good condition - control system does not boot up.

Condition: used, As-new CNC Vertical Machining Center, Milling Machine VMC, BAZ, HSC Milling, Machining Center TAIKAN B540Z Serial No. 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Travel range for working area X: 488 mm, Y: 400 mm, Z: 230 mm X-axis travel for tool change position X: 540 mm Table size 520 x 400 mm Spindle taper ISO 25 Distance spindle nose - table 165 - 395 mm Max. spindle speed 36,000 rpm, infinitely variable Feed rate 0 to 10,000 mm/min Rapid traverse 15 m/min Table load capacity 200 kg Max. tool length 120 mm Max. tool diameter 80 mm Max. tool weight 0.8 kg Tool change time approx. 10 sec. Axis drives 0.8 kW each Spindle drive 3.5 kW at 100% duty cycle Electrical connection 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 - Interfaces: LAN, USB and CF-Card - Measuring system for tool setting: METROL tool sensor - Vertical milling spindle = high-frequency spindle with liquid cooling and external recooling unit - Tool changer with 13 tool stations - Electronic handwheel - Coolant system - Protective enclosure with sliding door - Central lubrication - incl. 10 tool holders ISO 25 with ER20 collet chuck and a set of collets Fodpfx Amow Ed U Ne Eepp Transport dimensions (L x W x H): 1800 x 1500 x 2300 mm Weight: 2,900 kg Excellent condition – as new Machine comes from a showroom with very few operating hours.

Condition: not inspected (used), CNC universal milling machine, manufacturer: MAHO, type: MH700 C, serial number: 76730, year of manufacture: 1984, screen control, manufacturer: Maho, type: CNC 432, tool holder: SK 40, table size: 800 x 520 mm, coolant system, lamp. Fpedpfez R Na Esx Am Esp

Condition: used, 4-axis CNC milling machine Manufacturer: Quick Fodpfxjzvgmyo Am Ejpp Type: UA-481 New machine Technical data: 380 V-3-phase Working area: 2100 x 3050 x 400 mm 9 kW HSD/HSK-F-63 spindle NC Studio control 10 linear tool changers Double-layer vacuum table with 6 zones Yaskawa servomotor 2 Becker pumps (250 m³/h) NC Studio control with German language Optionally available at an extra charge: - 10-position rotary tool changer on the gantry - 12-position rotary tool changer on the gantry - 2 pneumatic pressure rollers for multiple part clamping - Vacuum table with T-slot for manual fixing of components Other configurations available upon request.

Condition: excellent (used), Year of construction: 1999, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 10,000 rpm, total height: 2,700 mm, total width: 1,700 mm, total length: 2,000 mm, power: 0.01 kW (0.01 HP), CNC-Drilling and Milling machine, Control Heidenhain TNC 426, only 8500 h table size 380x920 mm, travel X/Y/Z/W - 500/350/610 mm, max. table load 250 kg, spindle speed stepless 50-10'000 rpm., spindle performance 10,2 kw, drilling capacity Ø 25 mm, tapping capacity M20, taper SK 30, tool changer 24 places, elektronic handwheel, central lubrication, oil mist filter, coolant refigitor, preparation for spindle coolant + Renishaw, lot of tools and holders, manual Fsdpfxotvmtke Am Espp

Condition: excellent (used), Sub-spindle, Y-axis, C-axis FANUC 18i-TB control Turning diameter max 250 mm Turning length -555 mm Chuck Diameter -165 mm Main-spindle speeds 50-4'500 rpm Sub-spindle speeds 5'000 rpm Turret head 1+2: 24 positions with 12 driven positions each Tool presetting device Barloader Piece catching device Misc. accessories MARCELS MASCHINEN CH Fjdpfox A Eupox Am Ejpp

Year of construction: 1990, condition: ready for operation (used), Two nearly identical Maho milling machines, one with and one without a tool changer, as well as a complete range of accessories/spare parts, are available. Travel X/Y/Z: 600mm/450mm/450mm, tool holder: ISO40, quill stroke: 80mm, spindle speed: 5000rpm, feed rate: 4m/min, rapid traverse: 6m/min. Tool diameter: 130mm/100mm, max. tool length: 250mm, max. tool weight: 6kg. Machine dimensions: approx. 3150mm/3750mm/2150mm, weight: approx. 3600kg. Documentation available. On-site inspection possible. Fpsdexu I Atepfx Am Eop

Condition: used, CNC Milling Machine DECKEL Type FP 3 A Tool-tool milling machine with handwheels, also for conventional operation Serial No. 2206 - Built in 1982 GRUNDIG CNC 2101 CNC control system Travel paths X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle mount SK 40 Fsdpfov R E Rdjx Am Eopp Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Feed rate 5 - 500 mm/min, continuously variable Rapid traverse speed 1200 mm/min Spindle motor power: 2/4 kW, pole-changing Power supply: 380 V, 50 Hz - GRUNDIG CNC 2101 CNC control system - Mechanical handwheels for all three axes - Universal tilt-and-turn table - Vertical milling head tilts and is manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system in the machine base - Protective enclosure at the front and sides with three hinged doors - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement: L x W x H: 1900 x 1700 x 1950 mm Weight: 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition

Condition: good (used), Year of construction: 2001, CNC bed-type milling machine, manufacturer: IBERIMEX-MVR Type: UH-1250, year of manufacture: 2001 Control system: Heidenhain TNC124 Travel distances: X 1250 mm, Y 500 mm, Z 460 mm Clamping table: 360 mm x 1800 mm Spindle mount: ISO50 Machine with full enclosure. Further data can be found on the machine data sheet. Fsdod Eranspfx Am Eopp Machine in good condition.

Condition: good (used), Year of construction: 2006, functionality: fully functional, Overhauled: 2014 Control system: Heidenhain iTNC 530 Table: 10,000 x 3,000 mm Fsdpe Adn Rgjfx Am Eopp X-axis travel: 10,000 mm Y-axis travel: 4,200 mm Z-axis travel: 1,100 mm Distance between columns: 3,500 mm Distance between table and spindle (without head): 2,000 mm Distance between table and 45° head: 1,298 mm Table load capacity: max. 30,000 kg Rapid traverse rate: 10 m/min Feed rates: 6 m/min Spindle speed: 3,000 RPM Spindle power: 40 kW 3 heads: 1. Vertical, integrated, 2. Universal orthogonal head 1°, 3. Universal twist head

Condition: ready for operation (used), A CNC 3-axis universal milling machine Deckel (DMG Mori) is available. Travel X/Y/Z: 1200mm/600mm/500mm, tool holder: SK40, speed: 5000rpm, feed rate: 10m/min, rapid traverse: 10m/min, table dimensions X/Y: approx. 1600mm/675mm, max. table load: 2000kg. Machine dimensions X/Y/Z: approx. 3300mm/2400mm/2400mm, weight: approx. 7000kg, control: Grundig Dialog 11. An on-site inspection is possible. Fodpfjycwq Djx Am Eopp

Year of construction: 2000, condition: used, X-axis: 1000/1245mm, Y-axis: 630mm, Z-axis: 550mm, angle table: 1200x630mm, quill stroke: 75mm, tool holder: SK40, drive power: 7.5kW, spindle speed (continuously variable): 20-7,000/min, feeds: 1-20,000mm/min, rapid traverse: 20,000mm/min, connected load: 14kW, rated current: 24A, control: HEIDENHAIN TNC 426 with hand-held control unit, total connected load: 17kVA, weight: 6t, operating hours, machine on: 122,355h, control on: 18,579h, program run: 36,747h, with Knoll 400 K-1 scraper belt conveyor. Equipment: manually swivelling vertical milling head, protective enclosure with viewing window, coolant system, chip conveyor, HEIDENHAIN 3D touch probe TS 642. An on-site inspection is possible. Fpedpfszvv I Tsx Am Eep

Year of construction: 1986, condition: ready for operation (used), Travel X/Y/Z: 700mm/500mm/450mm, table dimensions X/Y: 900mm/500mm, max. table load: 500kg, spindle mount: SK40, speed: 3150rpm, quill stroke: 100mm, feed: 3m/min, rapid traverse: 6m/min, machine dimensions X/Y/Z: approx. 3550mm/3150mm/2100mm, weight: approx. 3600kg. On-site inspection is possible. Fodpfowkihxjx Am Eopp

Condition: good (used), Parts shown by hand not come. Machine is in good working condition Fsdpfx Amoz Ipaqj Espp