Used Cnc Vertical Machining Center for sale (68,677)

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 28 m/min, rapid traverse Z-axis: 28 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, controller manufacturer: Fanuc, controller model: 0i-MF, table width: 650 mm, table length: 2,500 mm, spindle speed (max.): 20,000 rpm, Equipment: chip conveyor, Mobile column vertical machining center Deli HB4D-250 Gkedpjxiv Dbofx Aftef - X-axis travel: 2,500 mm - Y-axis travel: 660 mm - Z-axis travel: 750 mm - Tool magazine capacity: 24 positions - BT 40 - Automatic, continuously tilting head on B axis with rotation +/- 110° - Integrated high-power, high-torque electrospindle, speed: 20,000 rpm - Hinged belt chip conveyor - High pressure through spindle: 30 bar - Pendulum machining capability - FANUC 0i-MF5 Beta CNC unit - Industry 4.0 & 5.0 package

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 14599631, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 24, The tool measurement system and the touch probe were retrofitted in 2022 for a total of EUR 15,000. The machine is prepared for 4th and 5th axis operation! TECHNICAL DETAILS Travel X: 500 mm Travel Y: 350 mm Travel Z: 610 mm Spindle speed: 18,000 rpm Spindle taper: SK30 Gkodpfjx Agp Iex Aftof Tool changer: 24 positions MACHINE DETAILS Operating hours Program run: 13,613 h Machine on-time: 39,034 h Control on-time: 38,758 h EQUIPMENT Connection and drives for 4th/5th axis 3D touch probe Heidenhain TS642 Tool measurement Heidenhain TT140 Spindle chiller unit Heidenhain HR410 electronic handwheel Approx. 30 tool holders Collets Complete documentation 3D touch probe

Condition: good (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, feed length X-axis: 15,000 mm, feed length Y-axis: 15,000 mm, feed length Z-axis: 15,000 mm, controller manufacturer: FANUC, controller model: SERIES 16i-M, workpiece weight (max.): 250 kg, total height: 2,300 mm, total length: 2,100 mm, total width: 2,200 mm, table width: 400 mm, table length: 650 mm, overall weight: 2,200 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 14, mount diameter: 30 mm, tool length: 200 mm, tool diameter: 80 mm, STAMA MC 014 CNC Vertical Machining Center - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 17 A - Overhang: 380 mm - Table to spindle nose: 150 - 480 mm - Table including 3 T-slots - Spindle bearing diameter: 50 mm - Note: without clamping devices and tool holders shown in the photos Note: the item must be collected on a binding date between 04. and 12.03.2026, to be agreed. Gksdpfox E T Ncsx Aftof FCA D-75181 Pforzheim – loaded onto truck

Condition: excellent (used), Year of construction: 2022, Machine type: CNC Vertical Machining Center Model: CMX1100V Manufacturer: DMGMORI Control: DMG MORI SLIMline® Multi-Touch Heidenhain Year of manufacture: 2022 Location: Germany Options: - Main spindle 12,000 rpm 13/9kW SK40 - Tool holder BT 40 for pull studs DIN 69872 - Direct absolute measuring system X-Y-Z - Magazine with 30 tool stations - Through-spindle coolant supply (IS) 20 bar - Double changeover filter - External coolant air-blast switching via M-function - Chip conveyor (scraper type, left side) - Tank capacity (left side chip conveyor): 250 - Coolant spray gun for chip removal - Automatic cabin roof - Signal lamp - Electronic handwheel - Probe kit for spindle and table Travel range X-axis 1100 mm Y-axis 560 mm Gksdpfxsx Dr Dye Aftsf Z-axis 510 mm Table size approx. 1400 x 560mm Workpiece weight max. approx. 1000kg Rapid traverse X / Y / Z 30 m/min Floor space (L x W x H) approx. 4.04 x 2.8 x 2.95m

Condition: used, Year of construction: 2014, 3-axis Robodrill Alpha D21LiA5 Year 2013/12 X-700mm Y-400mm Z-330mm 21-tool BT30 magazine max spindle speed 10,000 rpm Gkedpfex Ezknjx Aftjf 1x Renishaw workpiece probe 1x Renishaw tool probe through-spindle coolant (IKZ)

Condition: good (used), Year of construction: 2012, Parts shown by hand not come. Gkodpfx Afjx Awzbjtof 12.000 rpm,25 KW, 160Nm Control unit: HEIDENHAIN iTNC 530, 4th axis will come without parts shown by hand.

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations Gksdpfx Asw Nklhoftof - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: new, The LabCenter 260 CNC is a robust and compact Vertical Machining Center designed specifically for CNC training and the production of small workpieces. This innovative machine offers the full functionality of larger production machines while being mobile and professional, making it ideal for laboratories and training environments. Equipped with the SIEMENS 808D Advance control, the LabCenter facilitates an intuitive introduction to CNC applications. It boasts a continuously variable main spindle speed of up to 5000 revolutions per minute and features precisely machined cast iron frames, durable dovetail guides, and preloaded ball screws with servo drives on all axes. With a maximum travel of 160 mm on the X-axis and a table size of 400x145 mm, this C-Frame Vertical CNC Center enhances productivity with its efficient 4-station tool changer and mobile base, which allows for convenient tool and material storage. Ensure seamless operation with the included electronic hand-wheel, central lubrication, and comprehensive operating manual. KNUTH guarantees quality and precision in all aspects. To experience the benefits of this Vertical Machining Center, order online today. Gedsuy Ihhspfx Aftekf

Condition: good (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, feed length X-axis: 15,000 mm, feed length Y-axis: 15,000 mm, feed length Z-axis: 15,000 mm, controller manufacturer: FANUC, controller model: SERIES 16i-M, workpiece weight (max.): 250 kg, total height: 2,300 mm, total length: 2,100 mm, total width: 2,200 mm, table width: 400 mm, table length: 650 mm, overall weight: 2,200 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 14, mount diameter: 30 mm, tool length: 200 mm, tool diameter: 80 mm, STAMA MC 014 CNC Vertical Machining Center - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 17 A - Overhang: 380 mm - Table to spindle nose: 150 - 480 mm - Table with 3 T-slots - Spindle bearing diameter: 50 mm - Note: Without the clamping devices and tool holders shown in the photos Attention: The item must be collected firmly between 04 and 12.03.2026 on a date to be agreed upon. Gsdox E Tz Eepfx Aftekf FCA D-75181 Pforzheim – loaded onto truck

Condition: ready for operation (used), A machining center with 10-station tool changer is offered. Table clamping surface X/Y: 600mm/300mm, travel X/Y/Z: approx. 420mm/300mm/250mm, spindle speed: 6000rpm. Tool holder: BT30. Control: Brother CNC-400, machine weight: approx. 2000kg, including manual. Inspection possible by appointment. Gkedpex Ecu Esfx Aftjf

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1188877, Specification Table size 1016mm x 356mm X axis traverse 508mm Y axis traverse 406mm Z axis traverse 356mm Spindle BT40 Spindle speeds 0-10,000rpm Spindle motor 11.2kW Rapid feed rate 30.5m/min Toolchanger capacity 20 Tools Approximate weight 2313Kg   Machine Equipped with Haas CNC Control HRT 160 4th axis 11 off BT40 toolholders High flow coolant system Gedpfx Aox Afpgeftjkf Lighting Enclosed guarding Manual

Condition: good (used), Year of construction: 2002, Machine is in good condition. Parts shown by hand not come. Gjdpjtwpamjfx Aftjkf

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Gedotrhq Hepfx Aftskf Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Year of construction: 2022, condition: new, Offer on demand Gkjdpfx Ajiw Dgijftof Machine is immediately available

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: KMM526 1506, travel distance X-axis: 1,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, feed length X-axis: 10,000 mm, feed length Y-axis: 10,000 mm, feed length Z-axis: 10,000 mm, controller manufacturer: FANUC, controller model: SERIES 18i-MB, total height: 3,300 mm, total length: 2,700 mm, total width: 2,700 mm, table width: 470 mm, table length: 1,500 mm, spindle speed (min.): 36 rpm, spindle speed (max.): 12,000 rpm, mount diameter: 40 mm, tool length: 250 mm, tool diameter: 125 mm, input voltage: 400 V, Equipment: chip conveyor, STAMA MC 526 CNC Vertical Machining Center Gedex E Tt Iopfx Aftjkf - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 45 A - Table with three T-slots - Incl. 4th axis - Incl. 42-position tool changer - Overhang: 350 mm - Working spindle bearing diameter: 65 mm - Incl. chip conveyor and coolant system - Note: without the clamping devices shown in the photos Notice: The item must be collected bindingly between 04 and 12 March 2026 on a date to be agreed. FCA D-75181 Pforzheim – loaded onto truck

Condition: used, Year of construction: 2019, x-travel 550 mm Gkodpsww Nb Sjfx Aftef y-travel 305 mm z-travel 460 mm Control Sinumerik 808D adv. Siemens turning speed range - main spindle 10 - 10.000 min/-1 power capacity - main spindel 11 / 7,5 kW max. Torque 70 / 48 Nm tool taper BT 40 table surface area 800 x 320 mm max. table load 300 kg T-slots 3x 14 x 100 mm distance spindle /table 100 - 600 mm number of toolpositions 12 pos. tool taper BT 40 max. tool diameter 70 mm max. tool weight 6,0 kg change-time tool to tool 7,0 sec rapid traverse ( X / Y / Z ) 10 m/min feed speeds max. 10.000 mm/min repeating accuracy +/- 0,008 mm positioning accuracy +/- 0,01 mm total power requirement 15 kVA weight of the machine ca. 2,9 t dimensions of the machine ca. 3,5 x 2,5 x 2,4 m CNC-MachiningCenter Vertical OPTIMUM - OPTImill F 105 CNC - SHOW-ROOM-MACHINE

Condition: good (used), Alzmetall BAZ 15 CNC – Vertical Machining Center • 3 axes • Heidenhain control For sale is an Alzmetall BAZ 15 CNC, a compact and robust vertical machining center equipped with a Heidenhain control system. The machine is still operational and can be inspected under power. It is in well-maintained, technically flawless condition. Technical Data Manufacturer: Alzmetall Model: BAZ 15 CNC Application: Milling Machine type: Vertical machining center Control system: Heidenhain Weight: 3,200 kg Table load: 500 kg Axes: 3 X travel: 600 mm Y travel: 400 mm Z travel: 600 mm Spindle speed: 9,000 rpm Tool magazine: 24 positions If interested, simply write or call. Gksdpfx Afsxxxu Uotjf

Condition: good (used), Year of construction: 2005, Machine is in good working condition. Gedpfxoxwycde Aftekf

Condition: ready for operation (used), Year of construction: 2021, A vertical CNC machining center Spinner is available. Travel X/Y/Z: 850mm/510mm/510mm, speed: approx. 12000rpm, tool holder: SK40, tool stations: 30, rapid traverse: 36m/min, feed rate: 15m/min, table dimensions X/Y: 1000mm/510mm, max. table load: 600kg. Machine dimensions X/Y/Z: approx. 1900mm/1900mm/2450mm, weight: approx. 4500kg, control: Heidenhain TNC, operating hours: 3891h, spindle hours: 702h. Including coolant system, chip conveyor, oil mist extraction and probe. Documentation vorhanden. An on site inspection is possible. Expected to be available from April 2026. Gksdpjxwywnofx Aftjf

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, BOB-Mill M8 Model/Mold Making Engraving and Milling Center in Gantry Construction TECHNICAL DETAILS X-axis travel: 700 mm Y-axis travel: 800 mm Z-axis travel: 330 mm Spindle speed: 27,000 rpm Control unit: Mitsubishi E 80 Spindle nose to table: 110 – 440 mm Door width: 760 mm Worktable size: 800 x 600 mm Table load capacity: 400 kg Number of T-slots: 5 T-slot size: 18 mm T-slot spacing: 115 mm Spindle taper: BT30 12-position tool changer Feed rate: 0–10,000 mm/min Rapid traverse X / Y / Z: 15,000 mm/min Positioning accuracy: ± 0.005 / 300mm Repeatability: ± 0.003 mm MACHINE DETAILS Gkodpfoxv Su Nex Aftjf Spindle motor power: 7.5 kW 3-axis motor power X / Y / Z: 1.5 x 1.5 x 1.5 kW Machine weight: 4,300 kg Dimensions: 2,000 × 2,500 × 2,400 mm

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1064590, SPECIFICATION Travel X axis stroke 1270mm Y axis stroke 508mm Z axis stroke 635mm Distance spindle nose to table 102-737mm Table Width 457mm Length 1321mm Max. Weight on table 1588kg T Slots : width 16mm : pitch 80mm   SPECIFICATION Cont’d Spindle Taper size No.40 Speed 0-7500rpm Bearings Bearing lubrication Air/oil injection Cooling Liquid cooled Motor Spindle motor, max. rating 14.9kW Feedrate Rapid X, Y & Z axis 18m/min Max. Cutting feedrate 12.7m/min Toolchanger Capacity 20 tools Type BT40 General Approximate machine weight 6033kg Air supply (min) 113lpm, 6.9 bar MACHINE EQUIPPED WITH: - Haas (Fanuc compatible) CNC Control system Gksdpfxswy Uy Ee Aftsf Programmable coolant nozzle Automatic lubrication system Enclosed guarding Swarf auger Lighting

Condition: new, Year of construction: 2025, Ref. -No.: 10457 Manufacturer: IGREK Type: VMC 1160 Year of construction: 2025 Type of control: CNC Control: SIEMENS SINUMERIK 828D Storage location: Istanbul Country of origin: Türkiye X-Travel: 1160 mm Y-Travel: 610 mm Z-Travel: 600 mm Main spindle drive power: 9 kW Spindle Taper: HSK Tool Piece Magazine With: 24 Pcs./pcs. Spindle Speed: 10000 RPM Rapid Traverse X-Axis: 40 m / min Rapid Travel Y-Axis: 40 m / min Rapid Traverse Z-Axis: 40 m / min Machine length: 3500 mm Machine width: 2900 mm Machine Height: 2500 mm Weight Of The Machine Ca.: 8 t Further information: This is a new storage machine with 0 operating and spindle hours. The machine is available immediately and can be ordered with Siemens or Heidenhain controls. Gedpfx Afsxmd Snstskf Optional installation and servicing of the machines can be offered.

Condition: good (used), Year of construction: 2010, AWEA 1250, 15.000 rpm coolant thru spindle, Gedpjxu Ew Uofx Aftokf Tool changer 40 places Parts shown by hand not come. Machine vices, plate on table not come with machine.

Condition: ready for operation (used), Year of construction: 2009, Travel path X/Y/Z: 1035mm/560mm/510mm, table dimensions X/Y: 1200mm/560mm, max. table load: 1000kg, tool holder: SK40, tool stations: 20, spindle speed: 8000rpm, power: 13kW/9kW, torque: 83Nm/57Nm, feed rate: 20m/min, rapid traverse: 25m/min. Machine dimensions X/Y/Z: approx. 4000mm/4000mm/2600mm, weight: approx. 4500kg, control: Siemens Sinumerik 810D powerline, operating hours: 27241h. Including conveyor. Documentation available. An on-site inspection is possible. Gkodpsxrui Isfx Aftjf

Condition: good (used), Year of construction: 1996, Parts shown by hand not come. Gsdoruauqspfx Aftskf Machine have 2 spindles. One for 6.300 min-1 SK 40 Second up to 42.000 min-1 HSK E40. Spindle replaced 2018.