VERTICAL MACHINING CENTER

Deli CNC HB4D-250

Condition: good (used), Year of construction: 2000, Daewoo Puma 230, year of manufacture 2000, Fanuc 18 iT control, turning length 548 mm, turning diameter 350 mm, 10-position turret, tailed tailstock, three-jaw chuck Ø 254 mm, tool measuring arm, swarf conveyor, coolant system, main spindle newly mounted, flat guides, accessories, Godpfowx I Efex Aftskf

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 580 mm, spindle bore: 84 mm, turning diameter: 870 mm, Geminis lathe model GE 870 of 4000mm between points, turning on bed 870mm, turning on cross slide 580mm, turning on neckline 1100mm, length of neckline 340mm, speeds of 13-1000rpm, diameter of the hole of the shank 84mm, has mounted plate 3 claws diameter 315mm, has plate 4 independent claws of diameter 500mm, has fixed steady rests, lathe in general in good condition. Gsdpfx Afowqz D Ejtokf

Condition: excellent (used), Year of construction: 1995, x-travel 14000 mm y-travel 5000 mm z-travel 1500 mm w-axis 3000 mm column daylight 4000 mm column: max. dist. table - spindle nose 4500 mm workpiece weight 100 t table dimension - longitudinal 9000 mm table dimension - cross 3000 mm spindle taper ISO SK 50 spindle turning speed range 2-2500 U/min spindle motor 113 kW spindle diameter 200 mm max. torque on the spindle 9500 Nm feed in x - axis 1-10000 mm/min feed in y - axis 1-10000 mm/min feed range Z-direction 1-10000 mm/min rapid traverse 20000 mm/min height over floor 8600 mm control SIEMENS 840C weight of the machine ca. 360 t ATTACHMENTS angular milling head yes autom. tool clamping yes ball spindles yes guideway covers yes Gjdsvwgm Hjpfx Aftekf coolant unit yes high pressure cooling syst. (through spindle) yes closed cabin yes chip conveyor yes TECHNICAL DESCRIPTION 2 portal milling centres, each with 3 table pallets 9000 x 3000 mm: - Tool changer with 420 tools - Head pick-up system - Video monitoring via camera - High pressure lubrication unit for inner cooling 70bar AVAILABLE HEAD UNITS: - Fixed angle head HS800C600 105 Kw 600 long - Fixed angle head HSD350C850 50 Kw 850 long - Fixed angle head HSD 40C880 12 Kw 880 long - Fixed angle head HSD 190C1000 30 Kw 1000 long - Vertical spindle unit VS800C 105 Kw 900 long - Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time - Angle spindle unit SO800C905 - 22,5° fix - Angle spindle unit HSE1200CS -25° fix - Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth --> 1.350 1/min , B-Achse 0,5 Grad Hirth One additional drilling extension SE 350C plus 1 SE500C. DESCRIPTION OF CONDITION In 2011/2012 these 2 identical machines were retrofitted The milling length was extended to 14meters and an automatic changing system for table pallets was installed. Both machines can be seen under power by prior appointment.

Condition: good (used), Year of construction: 2002, machine/vehicle number: 120K587, Hello, For sale is a well-preserved Quaser MV204II universal CNC milling machine with HEIDENHAIN control at an unbeatable price-performance ratio Gksdpfopfawhex Aftjf The purchase price includes: tool changer, measuring probe, chip conveyor, coolant system, hydraulic system, documentation/machine documents, etc... Data machine dimensions Height: 2,825mm Width: 2,650mm Length: 2,200mm Weight: 7,500Kg Data travel paths X-axis travel: 1,020mm (feed speed 32,000mm/min) Y-axis travel: 600mm (feed speed 32,000mm/min) Z-axis travel: 560mm (feed speed 32,000mm/min) Milling table data Milling table size: 635 x 1,200mm Milling table loading capacity: 1,000Kg Table configuration: 6 x 18mm H 8 T-slots Milling spindle data Max. spindle speed: 7,500 / 10,300 1/min Max. spindle torque: 252Nm All further data available on request by email!!! Viewing appointment possible. Best regards

Condition: excellent (used), Year of construction: 2018, operating hours: 25,320 h, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, spindle speed (max.): 24,000 rpm, operating hours of spindle: 8,221 h, Accessories: - Coolant tank MCO incl. belt filter system and scraper belt conveyor - M&H 3D probe - Fanuc zero-point option - Spare spindle - 2GB data server (program storage) Travel X/Y/Z: mm: 700 x 400 x 330 Table size: mm: 850 x 410 Max. table load: kg: 300 Machine weight/with DDR-TiB: t: 2.1 / 2.3 Max. tool length: mm: 250 Max. tool diameter: mm: 80 Max. tool weight: kg: 3 Total weight: kg: 33 Number of tools: 21 Gedpfjxmhmvox Aftjkf Spindle taper 7/24 taper No. 30/SK30 DIN 69871A Spindle interface BBT30 Distance spindle nose to table (with HC100): mm: 250-580 Control: 31i-B5 Plus Spindle speed: rpm: 24,000 Spindle torque at 24,000 rpm (1 min): Nm | kW: 35 | 26 Spindle torque at 24,000 rpm (continuous): Nm | kW: 7.5 | 5.5 Rapid traverse in all axes: m/min: 54 Max. programmable feedrate: mm/min: 30,000 Tool change time (2 kg tool, chip-to-chip): S: 1.6 Bidirectional positional accuracy per axis (ISO230-2:1988): mm: < 0.006 Bidirectional positional repeatability per axis (ISO230-2:1997, 2006): mm: < 0.004 Air consumption: L/min | MPa: 160 | 0.35-0.55

Condition: used, Year of construction: 2015, machine/vehicle number: 5319, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,300 mm, BASIC MACHINE PowerSpeed 5 WITH FORK HEAD – KEY TECHNICAL DATA Travels: X-axis: 8,000 mm Y-axis: 2,600 mm Z-axis: 1,300 mm Machine bed (X-axis): Flat-bed design with 1,000 mm guideway width. Two electric motors drive via a centrally bolted rack. Hardened compact roller guides ensure high precision. Machine base (Y-axis): Welded steel construction with 900 mm guideway width. Two liquid-cooled feed motors and two measuring systems ensure dynamic performance and accuracy. Protected by telescopic steel covers. Headstock slide and headstock: Made of GGG 60 cast iron, guided by compact roller guides. Optimal power transmission thanks to long guideways and close arrangement of the Y and Z axes. Dual-spindle drive: Two vertical ball screws with separate drives and measuring systems for high dynamics and long-term accuracy. Drive system: Individual digital drives with AC motors. Feed and rapid traverse range: 2–30,000 mm/min. Acceleration: 3.5 m/s². Measuring system: Direct, non-contact linear measuring systems for high manufacturing accuracy. Automatic 2-axis yoke head with motor spindle: A-axis: 764 Nm (100% duty cycle), ±105°, clamping torque 2,160 Nm, accuracy ±5″ C-axis: 810 Nm (100% duty cycle), ±200°, clamping torque 3,024 Nm, accuracy ±3″ Motor spindle: HSK-A 63, up to 18,000 rpm, 89 Nm (100% duty cycle), internal/external coolant supply up to 70/20 bar, liquid-cooled Electrical equipment: 400/230V, 50Hz, 80kVA power rating. Control cabinet (IP54) with control and switching devices. Machine-to-cabinet cable length: 5m. Control cabinet cooling: Two-chamber system with automatic internal air cooling and dehumidification. Lubrication: Centralized lubrication for guides, permanent grease lubrication for the main spindle, oil mist lubrication in the milling head. Power supply: Compressed air 4–6 bar, G 1/4 connection, with filter pressure regulator and condensate separator. Gkodpfxewdub Ds Aftof Control: Siemens 840D sl with swiveling control panel. Wireless handwheel with LCD display, potentiometers, and buttons for axes, feed, and spindle. Remote maintenance: Fault diagnosis via alarm manager, notification via email/SMS (SIM card and network required). TightBlock base frame (X = 8,000 mm): Solid composite construction for damping. Foundation recommendation: ≥100 mm thickness per 1,000 mm of X-travel, structurally tested. Coolant system: 500 l tank, filter system

Condition: used, Year of construction: 1990, hobbing length 2100 mm milling width 300 mm max. module 16/18 min. module total power requirement 10 kW weight of the machine ca. 5 t dimensions of the machine ca. m Gkedpfx Aot Hwwqsftof

Year of construction: 2018, condition: used, x-travel:1600 mm y-travel:1300 mm z-travel:700 mm distance between columns:1500 mm distance spindle center to table:225-925 mm table-size:1800 x 1300 mm table load:4000 kg T-slot (width-distance-quantity):22x 160 x 8 mm spindle taper:HSK-A 63 spindle speed:24000 U/min spindle drive:25/33 kW Spindle motor torque:72.6/95.8 N.m. rapid traverse in x-y-z axis:30000 mm/min Cutting feed rate X/Y/Z axis:1~20000 mm/min Tool changer:20 fach max. tool diameter:100/130 mm max. tool length:300 mm max. tool weight:8 kg Gkodpfx Ashx R Dveftef total power requirement:80 kva Weight approx.:22 t Machine size (LxWxH):5660 x 5295 x 3930 mm CNC controller:Heidenhain TNC 620 spindle:IBAG electric spindle 24000rpm HSK-A63 Scales:Heidenhain automatic tool changer:20 fach chip conveyor - auger:2 Stk. Used portal milling machine with extensive accessories at a special introductory price. Important manufacturers of the components used in this storage machine are: Controllers and Servomotoren of Heidenhain, type TNC 620 Ball Screw Bearing - Japan Nsk X ball screw spindle Taiwan Hiwin Y Ball Bearing Taiwan Hiwin Z ball screw spindle Taiwan Hiwin 3 Axes Linear Guide - Japan Thk Or Germany Rexroth Electric screw unit - Hsk A63-24000rpm from IBAG Linear Encoder - Heidenhain Pneumatic System - Japan Smc Lubrication - Japan Showa Covers - Hema Air conditioning - Taiwan Kaokung Spindle water cooler - Taiwan point 3 axles Cable towing - Germany Igus Clutch - Germany KTR Company - Germany Mecano Relay - Omron Electricity - Germany Schneider MPG hand wheel - Japan Tosoku Further information on the machine, standard accessories and special accessories can be found in the appendix. Of course, we also gladly organize for you the delivery free house including assembly / commissioning and ready for handover as well as instruction

Condition: excellent (used), Year of construction: 2016, Takisawa TMM 250 3 turn-mill center, year 2016, Fanuc turning length:1300 Turning diameter: 350 mm Spindle speed (max.): 4000 1/min Gedjrt Ip Nepfx Aftjkf 9 axes 2 x spindles 2 x C-axis Swing diameter 780 mm Turning diameter max. 350 mm Turning length max. 1,300 mm Chuck diameter left 250 mm Chuck diameter right 200 mm Upper tool carrier with Y-axis 260 mm and B-axis 230° / +/- 115° Complete with 30-position tool changer Lower tool carrier 15-position turret - all positions driven Complete simultaneous 5-axis machining with turning/milling support. Tool changer with 30 tool positions Workpiece magazine, to the right of the machine, with gantry handling Driven tools on the turret. C-axis for left and right spindle Chip conveyor Internal coolant supply through milling spindle 20 bar Due to high office costs (customs regulations) we do not deliver to Turkey Turkey, Iran, Russia and Belarus.

Year of construction: 1979, condition: ready for operation (used), Max. grinding diameter: 300mm, Max. grinding length: 1950mm, Max. workpiece length: 2000mm Max Feed rate 1 – 30 m/min. Coolant supply 100 l/min Inf. variable speed range 2.000 – 6.000 RPM. Spindle 88 mm Centers height 150 mm Grinding wheels 100 – 250 mm Spindle power 3,5 kW Grinder Power 15 kW – 380 V – 50 Hz Gsdjhq Uigspfx Aftekf