Used Cold Light Source for sale (19,143)

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: Ksdpfx Asy Hkd Hjnyslu - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: used, Kaltenbach saw, cutting machine, mitre saw, metalworking circular saw, used machine Manufacturer: KALTENBACH Model: KKS Machine No.: 21139 Electrical specifications: 400 V Weight : 1200 kg aprox. Cutting speeds (blade peripheral speed): Klsdpfx Ajyfnpienysu Z59 tooth count: • 1st gear: 17 m/min • 2nd gear: 34 m/min Z72 tooth count: • 1st gear: 14 m/min • 2nd gear: 28 m/min Z90 tooth count: • 1st gear: 11 m/min • 2nd gear: 22 m/min

Year of construction: 1991, condition: used, Volume: 15 hl Kljdpsw Tml Eofx Anysu Periphery: Pump

Year of construction: 1995, condition: used, This filter system may only be used to filter preclarified products that have normal filterable properties in their composition. Ksdjvcqv Nspfx Anyslu Max. filtration flow: 400 hl/h continuous Permissible operating pressure: 6 bar Permissible operating temperature: 105 °C Volume: 1456 l Current: 10 A Voltage: 220 V Water: cold water: min. 150 hl/h; hot water (max 65 °C): min. 150 hl/h Compressed air: prepared compressed air: 4 - 6 bar; control air: 5 - 8 bar Weight: 3450 kg Base construction: basic frame with control and measuring components and filter container; cleaning module Features: 98 filter cartridges, 3 piston diaphragm pumps (Dosage), centrifugal pump with frequency converter (WT circuit), various analog and digital sensors (flow, pressure, level, temperature, conductance), various valves, control cabinet

Condition: used, Length: ca. 2.6 m Width: ca. 1.7 m Kledpfew Tmllex Anyju Height: ca. 2.3 m Features: Cooling unit (Technobloc, type: ACN050U, output: 0.7 kW, refrigerant: R404a)

Year of construction: 2001, condition: used, The Pall CFS system is designed as a single unit and can be installed directly in front of the filling line without the need for a buffer system. It is a completely independent process unit consisting of the following components: filter vessel Piping and connections Membrane cleaning system (CIP) integrity check Switchboard The hygienic design, the simple integrity test and the full automation ensure the microbiological safety of the system and usually allow the operation of the filling staff. Cluster filtering groups filter elements into clusters. Each cluster has its own outlet valve. During filtration, all clusters are open. Cleaning, sterilization and integrity testing are performed per cluster. Advantages of the CFS principle; Longer life Integrity testing on site Integrity diagnostics per cluster Special rinsing High specific flow rate Short flush times Constant flow in all candles Minimal water consumption Quick replacement of filter elements Controlled backwash Minimal beer loss High biological safety Constant availability With this filter system only preclarified products may be filtered, which have normally filterable properties in their composition. Max. filtration flow: 400 hl/h continuous Permissible operating pressure: 6 bar Permissible operating temperature: 105 °C Volume: 1456 l Current: 10 A Kjdsvcqx Dspfx Anyjlu Voltage: 220 V Water: cold water: min. 150 hl/h; hot water (max 65 ° C): min. 150 hl/h Compressed air: prepared compressed air: 4 - 6 bar; control air: 5 - 8 bar Length: 1,40 m Width: 1,20 m Height: 1,85 m Weight: 3450 kg Base construction: basic frame with control and measuring components and filter container; cleaning module Features: 98 filter cartridges, 3 piston diaphragm pumps (Dosage), centrifugal pump with frequency converter (WT circuit), various analog and digital sensors (flow, pressure, level, temperature, conductance), various valves, control cabinet

Condition: excellent (used), Year of construction: 2007, BIMAX TA 91 Automatic Circular Saw TECHNICAL DATA Total power requirement, rotary current: 3 x 400 V For pneumatic machines: 3 kW For hydraulic machines: 3 kW Customer-provided mains fuse: 16 A Supply line: 4 x 2.5 mm, 3P + E Air connection: Diameter: 12 mm Supply line: 8 – 10 bar, 40 l/min Operating pressure: 6 bar Spindle drive via three-phase motor: B5-100S 4/2-pole, Dahlander circuit: 1420 / 2840 rpm Power: 1.8 / 2.5 kW Saw blade mount: 32 mm Drive pin: 8 mm Pitch circle of drive pin: 45 mm Cutting wheel mount: 22 mm Saw blades: 160 x 1 to 300 x 2 mm Passage range: Round up to 65 mm Square up to 55 x 55 mm Rectangular up to 80 x 50 mm Standard clamping jaw for diameters: 10 – 60 mm Material feed length: 0 – 250 mm Saw weight: 500 kg Hydraulics: 120 kg Klodpov I Dmlsfx Anyeu No liability is assumed for the accuracy, completeness, or timeliness of this information.

Condition: good (used), Year of construction: 2002, Behringer Eisele VA-0-250-NC Circular saw TECHNICAL DATA Sawing range: 90 ° Saw blade diameter: 25 cm Bore: 40 mm Cutting range: 10-75 mm Cutting length: 5-900 mm Speed: 2800 rpm Cutting speeds: 26/52/103/206 SFPM or 0.13/0.26/0.52/1.05 m/s Feed speeds: 0-40 mm/sec NC axis: Yes Dimensions: 190 x 127 x 190 Kedpevdk A Eefx Anyolu Weight: 1300 kg We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: used, Year of construction: 1962, machine/vehicle number: 7188, saw blade diameter: 750 mm, We are offering this used Kaltenbach HDM 750 cold saw, year of manufacture 1962. Type: HDM 750 Machine number: 7188 Hardness of hardened steel at low speed: 60-90 kg/mm² Hardness of mild steel at high speed: ≤60 kg/mm² Kledpfx Anjx T Abdsyju If you have any questions or need further information, please feel free to send us a message or call us.

Condition: defective spare-parts repository (used), Year of construction: 1975, functionality: unexamined, machine/vehicle number: 3015, rotational speed (min.): 40 rpm, rotational speed (max.): 80 rpm, input voltage: 380 V, EISELE VMS2-D045 Cold Circular Saw – defective / untested Selling a used EISELE cold circular saw, type VMS2-D045. The machine is explicitly sold as defective or untested. Sale is exclusively as a DIY project, a source of spare parts, or for repair. The saw was taken out of service for safety or age-related reasons. Klodjy Uq U Iepfx Anyju No guarantee on function, accuracy, or operational safety. The EISELE VMS series is considered a robust industrial metal cold circular saw with a solid machine construction and high cutting accuracy. Technical data Manufacturer: EISELE Type: VMS2-D045 Machine type: Metal cold circular saw / Vertical circular saw Semi-automatic version Suitable for steel, stainless steel, and profile materials Pneumatic vise Coolant system available Multiple saw blade speeds High-voltage connection 400 V Pneumatic saw feed Solid cast iron machine construction Key technical data of the VMS series Saw blade diameter, depending on the version, approx. 275–315 mm Cutting range up to approx. 100 mm round material 2 cutting speeds, approx. 40 / 80 rpm Motor power, depending on the version, approx. 1.4–3.6 kW Condition used Sold explicitly as defective untested condition ideal as a source of spare parts or a restoration project no warranty no returns Inspection is highly recommended Loading and transport by the buyer Note Technical specifications according to the nameplate or existing version. Year of manufacture and accessories, see photos. Sale is made excluding any liability for material defects.

Condition: excellent (used), Year of construction: 2004, 1 used, very well-maintained fully hydraulic circular cold saw automatic with flat vertical guides Max. saw blade diameter: 325 mm Cutting capacity at 90°: - Round: 100 mm - Square: 85 x 85 mm - Rectangle, flat: 165 x 85 mm Infinitely variable speed range: 20 - 100 rpm Max. saw blade dimensions: 325 x 3.0 x 40 mm Single stroke feed: up to max. 550 mm Multiple stroke feed: for lengths over 550 mm Working height: 930 mm Drive power: 3 kW / 400 V Machine dimensions (L x W x H): 2150 x 1450 x 1950 mm Weight: approx. 650 kg Accessories / Special Features: • Fully hydraulic design • Fully automatic operation, single cuts also possible • Vise feed • 90° cutting angle • Infinitely variable speed range 20 - 100 rpm • Length setting via programming on the control panel • Cutting speed and feed can be continuously adjusted on the control panel during operation Ksdpfx Aoy E Uk Isnyolu • Single and multiple stroke feed • Adjustable flat vertical guides • Coolant system • Micro-spray system • 1 used saw blade included • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: like new (used), Year of construction: 2023, operating hours: 1,809 h, functionality: fully functional, machine/vehicle number: 1559, saw blade diameter: 550 mm, feed length X-axis: 800 mm, total length: 2,400 mm, total width: 2,000 mm, total height: 1,800 mm, cutting range round steel at 90°: 190 mm, type of input current: three-phase, rotational speed (max.): 2,850 rpm, cutting height (max.): 150 mm, overall weight: 1,650 kg, section length (min.): 3 mm, section length (max.): 4,000 mm, saw blade speed: 2,850 rpm, input voltage: 400 V, saw drive: 7,500 W, cutting diameter: 270 mm, saw blade bore: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction MG 3 Kljdpfx Anjy Dtpmjyeu ST Circular Saw Fully Automatic PROFILMA 502 Fully automatic operation, 7.5 kW drive, S6, 400 V, 50 Hz, 2850 rpm. Suitable for saw blades Ø 550 mm, cutting capacity 270 x 150 mm (width x height), Ø 190 mm. Max. profile width 270 mm. Equipped with Siemens S7 controller with touch display incl. piece counter. Includes CPU 315 and Flexisoft, batch multiplier for bundle material processing. Cycle time indication in seconds, chain dimensions, includes reversing device for cut lengths up to 4 m max. Automatic shut-off via limit switch at end of material, fault diagnostics, including IXON router for VPN connection (see datasheet). Motorized saw blade feed, steplessly adjustable, vertical and horizontal clamping from bottom to top (both on feed and discharge side of saw head). Cutting gap extension on both sides of the saw blade. Electronic material feed unit with 800 mm feed length, utilizing ball screw and servomotor, including pneumatic horizontal and vertical clamping system. The profile support area in the feed zone is equipped with a lift/lower roller. Remnant cut from 75 mm, profile-dependent. Clamping pressure reduction horizontally and vertically with 6 pressure regulators. Intermittent spray device with level monitoring and automatic shut-off, 1-liter lubricant reservoir. Noise protection package—frame interior lined with soundproofing mats. Two extraction nozzles Ø 100 mm. Safety guard over both the saw head and the feed unit. 740 mm roller conveyor with intrusion guard on the infeed side, 450 mm pertinax tabletop with intrusion guard on the outfeed side. MG 3 Chip Extraction Dust and chips are collected in a 172-litre metal container, which is removable for easy emptying. Two outlets with 100 mm hose adapters (no extraction hose included). 3.0 kW drive, 400 V, 50 Hz, three-phase motor. Max. air flow rate 2,600 m³/h, vacuum 30 mbar, with fan snail housing above the extractor. Large filter surface, pneumatic shaker unit for filter cleaning, filter class M. Max. noise level 80 dB(A). Selector switch for continuous operation or saw-controlled operation (no power cable). Painted: RAL 7035 / 9016.

Condition: new, neu ca. 14 - 16 Wochen ab Auf Kjdpfx Aey Nnxgonyolu Türkei 107500 € 2031.75 € 360 mm Ø360 x 40 mm 40 - 280 U/Min rund: 20 - 100 mm; quadra 60 mm 10 - 9999 mm 900 mm 15 kW 3400 mm 2675 mm 2750 mm 3450 kg 21,65 kW Mass production in continuous operation is done by BMDO 100 XS when producing cut-off pieces of steel and non-ferrous metals with a material cross-section up to a diameter of 100 mm. BMDO 100 XS is designed to be used with TCT circular saw blade in order to cut solid bars in high speedand excellent precise. It is also suitable for HSS blades to cut tubes. With the Standard 800mm stroke servo feeding and 6 meters automatic loader. BMDO 100 XS is perfect for large-scale production of solid bars. STANDARD ACCESSORIES: automtic loader 6 m motorized roller table 3 mMikrospray Coolant Hydraulic Vice Inverter Control Panel Saw Blade Brush Cover Switch Heavy Duty Gearbox OPTIONAL EQUIPMENT (prices on request): mist filter 6 m roller table

Condition: excellent (used), Full automatic Kledpfx Anoy H Dmneyju Saw blade diameter 450 mm Cut range diameter 150 mm Cut off lenght 1000 mm Misc. accessories MARCELS MASCHINEN AG

Condition: used, maximum load weight: 29,947 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2023, next inspection (TÜV): 04/2025, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,560 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2023, Equipment: ABS, Strong Light Curtain Side Semi-Trailer Fifth Wheel Height: 1145 mm Side Loading Height with Lifting Roof and Internal Height 2700 / 2610 mm Side Loading Height without Lifting Roof and Internal Height 2700 / 2560 mm Neck Height: 120 mm Overall Length: 13,830 mm Platform Internal Length: 13,620 mm Overall Width: 2,550 mm Platform Internal Width: 2,480 mm Internal Width Between Stanchions: 2,480 mm Internal Width Between Longitudinal Beams (without lifting roof): 2,480 mm Internal Width Between Longitudinal Beams (with lifting roof): 2,430 mm Axle Spacing: 1,310 mm Kingpin to 1st Axle Distance: 6,390 mm Technically Permissible Gross Weight: 42,000 kg Technically Permissible Axle Load: 9,000 kg Technically Permissible Fifth Wheel Load: 15,000 kg Accuracy: +/- 4% n.d. External Height: 4,000 mm Unladen Weight: 6,053 kg Chassis Super Light chassis frame, straight, longitudinal members with recessed fifth wheel area. Welded construction, weight-optimized, made from high-strength S700 steel Air suspension Side underrun protection made of aluminum profiles according to ECE 73 2 plastic wheel chocks Floor made of 30 mm phenolic resin plywood, load capacity 7.5t plus steel chequer plate at rear approx. 270 mm deep Steel lamp carrier Lashing rings - 19 pairs, 2T each Rubber bumpers at rear Rigid rear underrun protection Steel rear underrun protection Axles and Suspension Number of axles: 3 Rigid axles No axle lift on 3rd axle BPW disc brake axles 3x9000 kg, 22.5 ECO PLUS 3 clamp BPW ET=120 1st Lift axle Fifth wheel height: 1145 mm Landing Legs SAF Hercules two-speed landing gear, full load Fenders PVC fenders – 1 shell, 2 front, 2 rear Rims 6x aluminum rims 22.5x11.75 ET-120 ALCOA DURA BRIGHT Tyres 6x tyres 385-65-22.5, manufacturer optional Other Chassis Equipment Warning panel mounted on rear underrun protection Bozamet 32 pallet box Two chocks with mountings Body Internal height: 2,700 mm Top boards – 4 rows 1st row: aluminum side boards, H=100 mm, 8 pcs. Lifting roof (0, +50) Side curtains with 18 curtain tensioners, side curtain 900 g/m² Aluminum front wall Front wall collision protection (plywood), H=1,500 mm 2nd row: aluminum side boards, H=100 mm, 8 pcs. 3rd row: aluminum side boards, H=100 mm, 8 pcs. 4th row: aluminum side boards, H=100 mm, 8 pcs. Quick-release curtain tensioner at front Curtain tensioning device at rear Sliding roof, both sides openable, EDSCHA HYBRID Rear wall with aluminum double wing doors Brake System/Pneumatics Aluminum air reservoir Brake system (Knorr, Wabco, Haldex), manufacturer optional RTR automatic self-leveling (Standard brake system Wabco or Knorr with H-S valve) Chassis Paintwork Ksdpfx Anew N Ua Nsyjlu Chassis painted in RAL 3002 (Carmine red) KTL coating Curtain Colour Side curtain colour Roland 3015 ~ RAL 3002 (red) Other Equipment Paintwork Two-sided paintwork (powder coating) for front wall, doors, and corner posts Additional paintwork in RAL3002 (Carmine red) Electrics 2x 7-pin + 1x 15-pin connections with EBS connection, without connecting cables to the tractor unit Hella LED EASYCONN lighting Markings Partial contour marking with Wielton logo Partial contour marking, side white Partial contour marking, rear red Wielton warning stickers Labelling in German Certificates/Homologation XL Certificate Beverage Certificate All details are subject to change. Errors excepted. Subject to prior sale.

Condition: used, saw blade diameter 275 mm cutting diameter bis 90 mm cutting range flat 120 x 75 mm turning speeds 40/80 U/min miter cut 45°/90°/-45° ° Kledpowglgiofx Anyju weight of the machine ca. ca. 150 kg Manual saw blade feed Accessories: Coolant device Underframe with 2 drawers

Condition: refurbished (used), Year of construction: 1994, For sale: a Kaltenbach cold-cut saw. Gearbox with no play! Type: KKS 400 EC E Year of manufacture: 1994 Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid traverse: 1,550 mm/min Maximum working area: 130 mm Working area for square material: 120 mm Klodoy T Skbspfx Anyju Working area for flat material: 305 x 20 mm Working area for round material: 130 mm Minimum working area: 10 x 10 mm Mitre angle range: 0° - 90° - 0° Dimensions (L x W x H): 1,080 x 900 x 1,760 mm Weight: 900 kg Inspection/collection in 89558 Boehmenkirch. Shipping possible upon request. Forklift available for loading.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33802035390, empty load weight: 3,160 kg, maximum load weight: 34,840 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2024, next inspection (TÜV): 03/2027, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", color: grey, The images are archive images! The vehicle may still be in use! Fine-grained steel welded construction, fifth wheel coupling with interchangeable 2" kingpin (Chassis prepared for subsequent retrofitting, drip tray, 4 x hose holders, footboards, Fliegl standard) Container fittings: 1 x 20 ft in the center (or swap body container 7.15 / 7.45 / 7.82), not retractable at the front, the pivot pins of the container locking mechanism in the longer version. 24 tons, 2-speed landing gear, single-sided operation, with semi-circular lower part and straight connection plate, with stroke compensation Chocks with holder Side underrun protection Rear underrun protection with deep step for easier access + footboard inside Semi-elliptical fenders Ksdpfey Tvuwex Anyolu with anti-spray flaps according to EC Axles + Suspension BPW or SAF disc brake axles at the manufacturer's choice, with 430 mm disc diameter, "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Axle spacing offset 1410/1310 mm (combined transport) up to 44 tons gross vehicle weight Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuated by "3x braking" (starting aid is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Braking system 2-line compressed air braking system Color-coded line routing for easy servicing. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connection line 24 Volt EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by towing vehicles which ensure the effectiveness of the ABS! with lifting and lowering valve + auto-reset function Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the dashboard in the driver's cab, the truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5" manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED, (Note! with certain towing vehicles, false diagnoses may occur, although the function is given) 2 white position lights at the front in LED 2 white/red side marker lights at the rear in LED 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connection cable additional LED work lights at the rear, switched via reversing light Operating instructions This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration/Signage Germany with Dekra inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the side, yellow at the rear The images are archive images! The vehicle may still be in use!

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, Standard equipment red line Optical precisions drill point grinding machine for 2 fluted drills regrinding and point splitting in one chucking diameter range 2 to 16 mm (1 to 20 mm as option) point angle 80° - 150° infinitely adjustable cutting angle 0° - 20° infinitely adjustable relief angle set to 30° incl. complete electrical instalation with single phase electrical motor 0,3KW 115V 60Hz (or 220V 50Hz) Kledpfxobrpr Ue Anyeu and integrated power-supply for illumination of the optical system incl. built-in optical projection system with 10 power lens (zoom lens with 6 - 20 power as option) incl. integrated point splitting device incl. one precision collet holder and one set of double-tapered precision-collets of your choice (MP 16 for drill-dia. 3-16 mm, MP 6,5 for drill-dia. 1-6.5 mm or MP 20 for drill-dia. 6.5-20 mm) incl. 1 double sided grinding wheel dia. 125mm CBN (one side coarse [grit ~100] second side medium [grit ~200]) incl. wheel guard with connection system for vacum cleaner incl. 1 each of detailed operating manual with pictures, spare parts list, CD-Rom and CE-Declaration (on demand)

Condition: excellent (used), Year of construction: 2014, MEP Cobra 352 MA cold circular saw in very good condition. Kedeyzbmnopfx Anyslu Year of manufacture: 2014 Shipping is possible.

Condition: reconditioned (used), Year of construction: 2013, Thermocontainer used; overhauled showing signs of wear Type designation: C-720ü Technical data Interior: 610 x 810 x 1440 mm Kodpfx Anod Syhasyolu Outside: 735 x 955 x 1770 mm Weight: approx. 90 kg Content in litres: approx. 720 With slide-in bars for grids Features Locking in the middle of the door 2 lateral pull handles 1 folding handle in the door recess Trolley with castors 108 mm, PA, cold store safe Door-stay Inner tray with slide-in strips Angular corner supports with bend PE - sheets (2 mm thickness), light blue Profiled deflector plates (3 sides) 2 rigid wheels, 2 mobile wheels, padlockable with padlock Loadable up to approx. 400 kg From company dissolution, REVISED Prices: net per piece plus the currently valid VAT. Fine cleaning is to be carried out by the buyer Auction consists of a container Colour sales depending on stock For time reasons, enquiries regarding this article can only be made to information of a telephone number can be answered. approx. 100 pcs. in stock Article is only offered for self collection. Do you wish a shipping, please contact us in advance by telephone

Condition: used, functionality: fully functional, roll diameter: 50 mm, roll width: 600 mm, roll pitch: 90 mm, total width: 656 mm, total height: 80 mm, total length: 2,970 mm, conveying length: 2,970 mm, construction width: 656 mm, construction height: 80 mm, TAF item number: 1000003848 Manufacturer: TAF Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 2,970 x 656 x 80 Width incl. side panel in mm: 656 Side height in mm: 70 Conveyor length in mm: 2,820 Conveyor width in mm: 600 Substructure: none Support roller axle type: spring axle Support roller diameter in mm: 50 Support rollers per axle: 1 support roller Kedpjxq Egbjfx Anyolu Material: plastic Roller pitch in mm: 90 Drive: gravity Net weight in kg: 29 Special features: - Condition: used, fully functional Function test: OK

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, roll width: 50 mm, roll pitch: 90 mm, total width: 555 mm, total height: 80 mm, total length: 1,450 mm, conveying length: 1,450 mm, construction width: 555 mm, construction height: 80 mm, empty load weight: 22 kg, TAF item number: 1000005918 Manufacturer: TAF Industriesysteme Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 1,450 x 555 x 80 Width incl. side panel in mm: 555 Side height in mm: 70 Conveyor length in mm: 1,450 Conveyor width in mm: 500 Conveyor height in mm: 80 Roller pitch in mm: 90 Substructure: without (optionally available) Support roller axle type: spring axle Klodeyddu Espfx Anyou Support roller diameter in mm: 50 Support roller per axle: 1 Support roller material: plastic Drive: gravity Net weight in kg: 22 Condition: used / fully functional Function test: OK

Condition: good (used), Year of construction: 1996, CUTTING RANGE ..... MIN 10MM TO 75MM CUTTING LENGTH ..... 5-900 SINGLE STROKE -9999 REVERSE RUN CUTTING SPEED ..... 0 - 40 MM SEC. INFINITELY VARIABLE REVERSE 135MM/S MATERIAL FEED SPEED ..... MAX. 350 MM/S TENSION FORCE ..... MAIN CLAMP 10500N Kledpfx Aequuufjnyeu

Condition: used, Year of construction: 2000, Overview This cold glue labeling machine was manufactured in 2000 by Krones. The machine is designed for the application of cold glue labels on bottles. The machine is equipped with three labeling aggregates (front, back, and neck/seal label) and operates with a 20-head rotary table, making it suitable for medium-speed beverage production lines. The unit includes an integrated Krones Checkmat inspection system for quality control and comes with 11 bottle formats (0.5 – 1.0 L). Maintenance was performed as required. Technical data Capacity: up to approx. 15,000 bph Formats: 0.5 L – 1.0 L, 11 formats Application: Cold glue labeling of bottles Configuration: 20-head rotary table, 3 labeling aggregates Label positions: Front, back, neck/seal label Utilities: Standard Krones control system Incl. 3 glue pumps for cold glue system, Inspection system (Krones Checkmat), Format parts, Documentation Klodpfey Azv Sjx Anysu