Used Compounding for sale (200)

Condition: used, spindle bore: 150 mm, spindle mount: MK 6, Conventional Lathe Brand: ECHEA Model: DN 500 Serial no.: 4.075 Distance between centers: 6,000 mm Dusdpfxjyu Hyxj Ahnou Spindle bore: 150 mm Swing over bed: 1,000 mm Swing over gap: 1,300 mm Swing over cross slide: 980 mm Swing over compound rest: 780 mm Bed width: 670 mm Number of speeds: 24 (4–520) Morse taper in tailstock: 6 Hardened and ground bed. 400 mm gap in front of the chuck. Powered carriage. Includes 2 interchangeable carriages: - Tool post for conventional turning (tool post 280 x 280 mm, for tools up to 80 mm height) - Grinding attachment with 500 mm wheel and 10 HP motor – 1450 rpm Included: - TdG 3-jaw chuck 500 mm with outside jaws, inside jaws, and soft jaws - Grinding attachment for 500 mm wheel and 10 HP – 1450 rpm motor - Cable winder for powered carriage - Coolant tank with pump - 2 open steady rests with special non-seize pads, for approx. 250 mm diameters - 1 open conventional steady rest for approx. 200 mm diameter - 1 closed conventional steady rest for approx. 450 mm diameter - 23 grinding wheels for grinding attachment included, see photos.

Condition: used, functionality: fully functional, mileage: 425,315 km, power: 338 kW (459.55 HP), first registration: 09/2023, fuel type: diesel, overall weight: 8,461 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Cruise Control: I-See. Map based topography information. Cab: Globetrotter XL Cab, extra high sleeper. 2 x 210 Ah - AGM Absorbent Glass-fibre material type. D13K460TC Turbo-compound diesel engine, 460hp, 2600Nm SCR and EGR. EURO 6. I-Shift Automated 12-speed - GCW 60 tonne. Standard transmission shift - I-Shift or Powertronic. Volvo Engine Brake - Retardation D13K-375kW/D16-500kW. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Electrically controlled air conditioning with sun sensor. Comfortable, suspended driver seat with belt. Comfortable suspended Passenger seat with seatbelt mounted in seat. Height adjustable foldable top bunk 700 x 1900mm. Lower bunk 815mm wide in the centre. Cab parking heater - 1.8kW Air to air. 33 litre under bunk mounted fridge / freezer with dividers. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Forward collision warning with AEBS advanced emergency brake system. Front tyres - 315/70 R22.5. Rear tyres - 315/70 R22.5. Jost JSK 37 cast fixed or sliding fifth wheel. Wheelbase 3800 mm. 900 litre, left side fuel tank with steps. 65 litre AdBlue tank under/behind cab. 570 litre, right side fueltank. Speed limiter setting 90 km/h - 56mph. Technology Dusdpfoyxn R Uox Ahnou Secondary colour information display. FMS gateway for Fleet Management System. Exterior LED Headlights. Automatic headlight switching between day running light and low beam. Front fog lights - white.

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 95 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 650 mm, turning length: 6,000 mm, total length: 8,500 mm, total width: 1,800 mm, total height: 1,800 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 8,000 kg, spindle mount: MK 6, The PORĘBA TPK-90/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: available within 3 to 3,5 months, will be generally overhauled for Customer´s order Technical data: Dusdpfx Ahoiwa Iasneu - distance between centers/turning length: 6000 mm - turning diameter over bed: 930 mm - turning diameter over support: 650 mm - turning diameter in bridge recess: 1200 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 8500 mm width: 1800 mm height: 1800 mm total weight: 8000 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-600 mm, with rollers - MULTIFIX quick change tool post

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. Dsdpey D A Swsfx Ahneuu POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: new, Year of construction: 2026, TYTAN 750 VARIO Metal Lathe (230V) with Variable Spindle Speed Control The TYTAN 750 VARIO is a versatile metal lathe designed for machining external and internal cylindrical surfaces, threading, drilling, countersinking, and reaming. With a working range of 250 x 750 mm and a DC motor (1.1 kW / 230V), it is ideally suited for small industrial workshops, repair shops, and home garages. Duedpfx Ahew H Rauonsu Key Features Modern DC motor with stepless spindle speed control offers ease of use and minimizes setup time. LCD display shows real-time spindle speed, enabling precise adjustments during cutting and threading. Two spindle speed ranges: Low: 50–1125 RPM – for machining hard steels High: 100–2250 RPM – for high-speed precision turning Thread cutting capabilities: Metric threads – 18 types (0.2–3.5 mm) Imperial threads – 21 types (8–56 TPI) Capable of cutting both right- and left-hand threads Automatic longitudinal feed – 6 speed settings (0.07–0.40 mm/rev) significantly reduce machining time while maintaining accuracy during long part turning. Fully compliant with EU directives (CE) and DIN standards for safety and quality. Technical Specifications Parameter Value 3-jaw chuck 125 mm Max. turning diameter over bed 250 mm Turning diameter over cross slide 150 mm Distance between centers 750 mm Max. part length (chuck to center) 700 mm Bed width 135 mm Tool post size 65 x 65 x 20 mm Max. tool size 12 x 12 mm Spindle bore 30 mm Spindle taper MT4 Spindle speed control Stepless (L/H range) Spindle speed range (L/H) 50–1125 / 100–2250 RPM Metric threads 18 types (0.2–3.5 mm/rev) Imperial threads 21 types (8–56 TPI) Longitudinal feed rates 6 settings (0.07–0.4 mm/rev) Compound slide travel 70 mm Longitudinal slide travel 650 mm Cross slide travel 135 mm Tailstock quill diameter 30 mm Tailstock quill travel 60 mm Tailstock taper MT2 Motor power (S1/S6) 1.1 / 1.32 kW / 230 V Dimensions (L/W/H without stand) 1310 x 610 x 490 mm Dimensions (L/W/H with stand) 1350 x 560 x 1250 mm Weight (without stand) 165 kg Weight (with stand) 180 kg Standard Equipment 3-jaw chuck (125 mm) Fixed and traveling steady rests Change gears set Fixed center MT2 Fixed center MT4 Reversible chuck jaws (1 set) Grease gun Chip tray Chuck key and tool post wrench Service tool kit CE-compliant safety guards

Condition: used, functionality: fully functional, mileage: 286,048 km, power: 338 kW (459.55 HP), first registration: 09/2022, fuel type: diesel, overall weight: 8,461 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features I-See Predictive Cruise Control - Map based topography information Cab: Globetrotter XL Battery system type: Single energy battery system (2 batteries) Engine & Turbo Package: D13K460TC Turbo-compound diesel engine, 460hp, 2600Nm SCR and EGR Gearbox: I-shift Automated 12-speed - GCW 60 tonne Automatic transmission manual shift options: Standard transmission shift - I-Shift or Powertronic Engine Brake Type: Volvo Engine Brake - Retardation D13K-375kW/D16-500kW Advanced Emergency Brake System AEBS Driver attention support Driver comfort Cab Climate Unit: Electrically controlled air conditioning with sun sensor Driver Seat: Comfort 4: suspended - belt in seat Passenger seat: Comfort 4: suspended - belt in seat Top bunk: Height adjustable foldable top bunk 700 x 1900mm Lower bunk: Lower bunk 815mm wide in the centre Aux. cab heater: 1.8kW Air to air Refrigerator: 33 litre under bunk mounted fridge / freezer with dividers I-Park Cool Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front Axle Tyre Size: 315/70R22.5 Drive Axle Tyre Size: 315/70R22.5 Fifth Wheel Type: Jost JSK 37 cast fixed or sliding fifth wheel Wheelbase: 3800 mm Drive Axle Ratio: 2.31:1 Fuel tank - RHS: 570 LITRE ( 150 US GALL.), RIGHT SIDE FUELTANK Duedpfoyq Rxksx Ahnju Fuel tank - LHS: 900 LITRE, LEFT SIDE FUEL TANK WITH STEPS Plastic AdBlue Tank: 65 litre under/behind cab Cruise Control: Eco fleet software - with speed 85, I-See and push button I-shift Technology Secondary Information Display: Secondary colour information display FMS gateway: FMS gateway for Fleet Management System Exterior Headlamps: LED headlamps Daytime Running Lights: V-shaped Front fog lamps: Front fog lights - white Cornering lights: Static corner lights - works with indicator at low speed to light up direction Air Deflector - Roof: Roof air deflector Side air deflector: Cab side air deflector - long tractor

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: Duodpfx Ajy A I Sgjhneu - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: new, functionality: fully functional, The Prep 350 bulk scale SFC systems os automated purification systems designed to easily purify large amounts of sample. Djdpfjy D Tk Rsx Ahnsuu System features accurate co-solvent gradients, low and high pressure separator options for maximum recovery of purified compounds, and stacked injection capability for high throughput purifications. The systems are designed for chiral and achiral separations and suitable for the purification of enantiomers, complex synthetic chemicals, or natural products. Available in flexible configurations with CO2 recycling capability (only with high-pressure collection), these systems are controlled by user friendly ChromScope™ Software. Optimal column I.D: 50 mm Recommended total flow rate*: 300 g/min Typical throughput: Up to 100 g/day Fractions: 5 + 1 waste The full complex include as follow: Recycling Option, 240V/60Hz CE Automated Chiller, Accel 500 230V/50hz 2489 UV/Visible Detector for Prep SFC Kit, SFC 200/350 System Bottles MONITOR, Lenovo ThinkVision Flat Panel Kit, RocketPort Card and Extension Cable Viridis BEH 2-EP 5µm OBD 50x250mm SFC Prep UV Sample Chemistry Prep SFC Installation Cert Not all Photos uploaded.

Year of construction: 1979, condition: ready for operation (used), A compound feed line is available. 1) Bühler hammer mill. 2) Bühler DPAB pellet press, year of manufacture: 1979. 3) Loos rapid steam generator, year of manufacture: 2000, capacity: 300kg/h, max. operating overpressure: 13bar. 4) Gebrüder Jensen weighing and mixing unit, year of manufacture: 1979. Production capacity range: approx. 5-10t/h. Including the associated drag conveyors and bucket elevators. Documentation available. An on-site inspection is possible. Individual sale by arrangement is possible. Duedpfx Ahsy Aad Ieneu

Year of construction: 2006, condition: good (used), for processing aluminium and PVC profiles in facade and structural construction Mitres in 3 planes, also suitable for use as a compound crosscut saw Processing of profiles up to 300 mm width at 90°, sharp mitres up to 30° Notching depths horizontally up to 185 mm and vertically up to 230 mm at 90° Notching width at 90°: 300 mm, profile height up to 280 mm Motorised height adjustment for notching, positioning with electronic digital display Djdpfx Ahoyz T A Uonouu Saw blade swivel range vertical 60° - 90° - 25° (front/centre/rear), motorised positioning with electronic digital display Saw blade swivel range horizontal with vertical blade 45° - 90° - 45°, motorised positioning with electronic digital display

Condition: ready for operation (used), functionality: fully functional, Press line for manufacturing can ends (tops and/or bottoms) Dodpfex Ezuyex Ahnjuu Comprising: - Bliss 1831 double die press - Bliss double curler - IMC / Grace compound liner - Drying oven - Production capacity: up to 600 ends per minute

Year of construction: 2024, operating hours: 10 h, condition: like new (used), functionality: fully functional, Extrusion Line with Densifier – Ideal for Recycling Applications Dodpfxetziudj Ahnsuu This robust and versatile extrusion line is perfectly suited for recycling polyolefins such as LDPE, HDPE, and PP. Thanks to the integrated densifier, even materials with low bulk density – such as regrind, EPS, film scraps, and other lightweight plastic waste – can be processed efficiently. The densifier compacts the loose material and feeds it directly into the extruder, ensuring a consistent material flow and stable extrusion process even with challenging input materials. Key Features: • Suitable for all types of polyolefins • Ideal for lightweight, bulky materials like EPS or film regrind • Efficient feeding system via integrated densifier • Compact design and easy maintenance This line is an excellent choice for recyclers, plastic processors, and compounders who require flexibility and reliable performance when working with diverse input materials.

Condition: used, functionality: fully functional, mileage: 326,687 km, power: 338 kW (459.55 HP), first registration: 03/2023, fuel type: diesel, overall weight: 8,461 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Cruise Control: I-See. Map based topography information. Cab: Globetrotter XL Cab, extra high sleeper. 2 x 210 Ah - AGM Absorbent Glass-fibre material type. D13K460TC Turbo-compound diesel engine, 460hp, 2600Nm SCR and EGR. EURO 6. I-Shift Automated 12-speed - GCW 60 tonne. Standard transmission shift - I-Shift or Powertronic. Volvo Engine Brake - Retardation D13K-375kW/D16-500kW. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Electrically controlled air conditioning with sun sensor. Comfortable, suspended driver seat with belt. Comfortable suspended Passenger seat with seatbelt mounted in seat. Height adjustable foldable top bunk 700 x 1900mm. Lower bunk 815mm wide in the centre. Cab parking heater - 1.8kW Air to air. 33 litre under bunk mounted fridge / freezer with dividers. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Forward collision warning with AEBS advanced emergency brake system. Front tyres - 315/70 R22.5. Rear tyres - 315/70 R22.5. Jost JSK 37 cast fixed or sliding fifth wheel. Wheelbase 3800 mm. 900 litre, left side fuel tank with steps. 65 litre AdBlue tank under/behind cab. 570 litre, right side fueltank. Speed limiter setting 90 km/h - 56mph. Djdpfxsyufile Ahnjuu Technology Secondary colour information display. FMS gateway for Fleet Management System. Exterior LED Headlights. Automatic headlight switching between day running light and low beam. Front fog lights - white.

Condition: used, Type: 25 x 120 Straight Bed Lathe Distance between centers: 72″ Dujdpfxswmlcko Ahneu Swing over bed: 26″ Swing over cross-slide: 16″ Spindle speeds: 7.4 to 600 (24) Spindle bore: 4 1/8 Full length screw cutting: yes Chuck mounting: D1-11 Tailstock taper: No.5 Morse Power compound Power traverse Slide along chuck guard and we have rear splash guarding Main motor: 15kw 3 phase Weight: approx 5 tons Condition: Slideways very good Can also be repainted at extra cost Cleaned and serviced

Condition: new, mileage: 16 km, power: 353 kW (479.95 HP), first registration: 11/2025, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, permissible axle load (axle 1): 7,100 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2026, Equipment: AdBlue, central locking, parking air conditioner, = Additional options and accessories = Duodpfoyx A Izox Ahnju - Aluminum fuel tank - Rear work lights - Front work lights - Heated mirrors - Windscreen - Cab - Air-suspended seats - Pre-heating system = Remarks = Renault T480 4x2 - Lowdeck - Lifting 5th wheel - Retarder - Night climate control - Full air suspension - New MY: 25-11-2025 KM: 16 - NEW Fully equipped truck Low deck Hub-mounted fifth wheel / lifting fifth wheel Alcoa wheels 11-2025 (new) Retarder Parking cooler (standclima) Turbo compound Full air (vol luft) 475-350 liter fuel tank Luxury seats = Further information = Suspension: Air suspension Front axle: Alloy wheels; Max. axle load: 7100 kg; Steering; Tire tread left: 100%; Tire tread right: 100% Rear axle: Twin tyres; Alloy wheels; Max. axle load: 11,500 kg; Tire tread inner left: 100%; Tire tread outer left: 100%; Tire tread inner right: 100%; Tire tread outer right: 100% Gross vehicle weight: 18,000 kg Overall condition: very good Technical condition: very good Optical condition: very good Please contact VAEX The Truck Traders for further information.

Condition: used, mileage: 22,736 km, power: 368 kW (500.34 HP), first registration: 11/2025, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, suspension: steel-air, Year of construction: 2025, Equipment: air conditioning, central locking, cruise control, differential lock, fridge, full service history, power mirror, retarder, trailer coupling, - 2 bunks - 3D spoiler set with side paneling - ACC – adaptive cruise control - Work lights - Air-suspended passenger seat - Standard gear ratio - Extra cab insulation - Air-suspended driver’s seat - FMS interface (Fleet Management System) - Transmission oil cooling - I-Park Cool – stationary air conditioning - I-Save - I-See - Automatic climate control - Radio CD MP3 Bluetooth - Reversing camera - Disc brakes - Sun visor - Toolbox – tool box - Xenon headlights - Additional chassis step behind the cab Volvo FH500 AERO 4x2t Globetrotter XL, I-Save WITH WARRANTY until 11/2027 Aero CMS Retarder Globetrotter XL Dual battery system: one battery block for cab/other consumers, one starter battery block Dynamic specification Dsdpfx Ahey Amf Eonouu Driver comfort package Selected Living package Plus FH, two beds Info & media package High Aerodynamic kit / spoiler package ACC / adaptive cruise control with collision warning and emergency braking function Fuel saver package for D13 I-Torque: efficiency-optimized cruise control with torque control, incl. I-Roll & brake cruise control I-ParkCool I-See I-Shift AT2812 I-Save 12.8 L diesel engine with turbo compound, 510 HP/375 kW, 2,856 Nm Euro 6, phase E Navigation system Leather steering wheel Comfort driver’s seat, air-suspended, heated, seat belt integrated Comfort passenger seat, air-suspended, seat belt integrated Armrests with leather covering Two armrests each for driver and passenger seat Cool box / refrigerator Auxiliary heater Luxury switch console at bunk (interior light, heater/air con, sunroof, door, alarm, windows, and radio) Interior lighting with dimmer and red night lighting Reinforced cab insulation Rear/top storage compartments Curtains for windscreen, windows and bunk Electric glass sunroof LED main headlights LED front fog lights Reverse monitoring/camera Camera monitoring system (CMS) Close-range camera on passenger side My Truck app Engine brake with exhaust pressure governor Adaptive traction control ACC / adaptive cruise control Emergency brake assistant Side collision avoidance and turn assist (both sides) Lane keeping assistant Adaptive traction control Traffic sign recognition (ISA) Driver alert system Preparation for OBU (toll device, Toll Collect) Connection for third-party FMS systems Rear axle RSS1352B Drive axle ratio 2.31 : 1 Wheelbase 3,800 mm Transmission oil cooler I-Shift controls on driver's seat console I-Shift AT2812, automated 12-speed gearbox Manual operation in automatic mode possible (incl. kickdown function) PTO functions for I-Shift Chassis side cover with raised edge Extra spring accumulator on front axle Aluminum air tanks 650 L aluminum tank, left 405 L aluminum tank, right 90 L AdBlue tank Front: parabolic suspension, 2-leaf Rear: air suspension, 4 bellows Austrian vehicle Year of manufacture 2025 Contact persons: Mr. Thomas Pletz (German, English) p: @:thomas. Mrs. Daniela Rudolf (Spanish, Italian, English) p: / @:daniela.

Condition: good (used), Year of construction: 1972, functionality: fully functional, This processing plant is designed for the production of creams, ointments, gels, pastes, lotions, suppository compounds, etc., with a usable volume of 100 liters. The total volume with the container closed is 123 liters; the minimum fill volume is 35 liters. Dedsyx Sxcopfx Ahnouu The system consists of a fully enclosed stainless steel container with double jacket, which can be electrically or water heated/cooled. The container features a lid with integrated mixing units and drives. The mixing vessel is mounted on three castors and can be wheeled out for filling or cleaning purposes. The lid is mounted on a lifting column for hydraulic raising and lowering, enabling convenient cleaning and emptying. It is fitted with an observation window and two inlets with valves, which can also be used for adding other product components. Additionally, an adjustable mechanism is provided for setting the grinding gap of the colloid mill. Technical specifications: Container: Permissible operating pressure: 1 bar / -1 bar Homogenizer: 1,500/3,000 rpm – 1.8/2.5 kW Anchor agitator: 19/38 rpm – 1.8/2.3 kW Spiral agitator: 29/58 rpm

Condition: used, Air operated double diaphragm pump DEPA Type DH40-FA-ZRT Air operated diaphragm pump, double pump Dodpfx Aheib D H Ujneuu Serial No.: B1802498 Year of manufacture 09.05.2018 Temperature: max. 130°C Size: 40 Grain size: max. 16 mm Suction height: approx. 2 m Suction height product filled: approx. 9 m Operating pressure: max. 7 bar air connection: 3/8" suction connection: 1 1/2" pressure connection: 1 1/2" - self-priming - aluminum housing - Diaphragm plate made of stainless steel - Diaphragm made of nopped E4® PTFE compound - Balls made of PTFE - Ball seats made of stainless steel Space requirement: L x W x H: 370 x 270 x 450 mm own weight: 15 kg very good condition

Condition: excellent (used), Year of construction: 1980, 1 x Second-operation Lathe Precision Construction PM 1-FZ Year of Manufacture: approx. 1980 Spindle newly mounted. Equipment: - Hand-lever compound slide rest with Multifix A quick-change system - Electric tailstock for drilling and thread cutting - Collet clamping with draw collets - Coolant system Technical Data: - Spindle bore: 23 mm - Spindle speeds: 700/1400/2800 (left/right) - Center height: 110 mm - Center distance: 160 mm - Max. swing over bed: 220 mm Accessories: 20 x draw collets 359 E K 23 (1 - 20 mm, increasing by 1 mm) 1 x draw collet in tailstock 319 E K 12 1 x Multifix A tool post with 1 cassette Operating manual (Copy) Additional accessories, such as collets with intermediate sizes, available in stock. Djdpjqyfpmsfx Ahnouu Machine can be inspected under power.

Condition: used, mileage: 16,037 km, power: 368 kW (500.34 HP), first registration: 11/2025, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, suspension: steel-air, Year of construction: 2025, Equipment: air conditioning, central locking, cruise control, differential lock, fridge, full service history, power mirror, retarder, trailer coupling, - 2 bunks - 3D spoiler set with side fairings - ACC - adaptive cruise control - Work lights - Air-suspended passenger seat - Single reduction - Air-suspended driver's seat - FMS interface (Fleet Management System) - Gearbox oil cooling - I-Park Cool - stationary air conditioning - I-Save - I-See - Automatic climate control - Radio CD MP3 Bluetooth - Reversing camera - Disc brakes - Sun visor - Toolbox - Xenon headlights Djdpfjyz Aiwex Ahnouu - Additional chassis step behind the cab Volvo FH500 AERO 4x2t Globetrotter XL, I-Save With WARRANTY until 11/2027 Aero CMS Retarder Globetrotter XL Dual battery system: one battery block for the cabin/other consumers and one starter battery block Dynamic equipment Driver comfort package Selected Living package Plus FH, two beds Info and media package High Airflow/spoiler package ACC/adaptive cruise control with collision warning and emergency braking function Fuel-saving package for D13 I-Torque: efficiency-optimized cruise control with torque management, incl. I-Roll & brake cruise control I-ParkCool I-See I-Shift AT2812 I-Save 12.8 l diesel engine with turbo-compound, 510 HP/375 kW, 2,856 Nm Euro 6, phase E Navigation system Leather steering wheel Comfort driver's seat, air-suspended, heated, seatbelt integrated in seat Comfort passenger seat, air-suspended, seatbelt integrated in seat Armrests with leather cover Two armrests each for driver and passenger seats Cool box / refrigerator Auxiliary heating Control panel (luxury) at the bunk (interior lighting, heating/air con, sunroof, door, alarm clock, window, and radio) Cabin lighting with dimmer and red night light Enhanced cab insulation Rear/top storage compartments Curtains for windscreen, windows, and bunk area Electric glass sunroof LED main headlights Front LED fog lights Rear monitoring/reversing camera Camera monitor system (CMS) Close-range camera on passenger side My Truck app Engine brake with exhaust pressure controller Adaptive traction control ACC / adaptive cruise control Emergency brake assist Side collision avoidance & turn assist (on both sides) Lane keeping assistant Adaptive traction control Traffic sign recognition (ISA) Driver alert system OBU preparation (toll device, Toll Collect) Connection for third-party FMS systems Rear axle RSS1352B Drive axle ratio 2.31:1 Wheelbase 3,800 mm Gearbox oil cooler I-Shift operation via control unit on driver's seat I-Shift AT2812, automated 12-speed gearbox Manual shifting possible in automatic mode (incl. kick-down function) PTO functions for I-Shift Chassis side panels with edge raiser Extra spring accumulators on front axle Aluminum air tanks 650 L aluminum tank left 405 L aluminum tank right 90 L AdBlue tank Front parabolic suspension, 2-leaf Rear air suspension, 4 air bellows Austrian vehicle Year 2025 Contact persons: Mr. Thomas Pletz (German, English) p: @: thomas. Mrs. Daniela RUDOLF (Spanish, Italian, English) p: / @: daniela. Vehicle location: ...

Condition: excellent (used), Weiss Type: EmissionEvent VOC/240 Weiss Technik EmissionEvent VOC/240 Industrial Emission Test Chamber / VOC Test Chamber / Climatic Test Cabinet Water-cooled A professional emission test chamber is offered for sale Weiss Technik EmissionEvent VOC/240 (Year of manufacture: 2018) from an industrial laboratory and testing operation. The device is designed for conducting standardized emission tests under precisely controlled temperature, climatic, and process conditions, and is built for continuous use in laboratories, industrial settings, and quality assurance. Dedpeyhfg Djfx Ahneuu What does VOC mean / What does the device do? VOC = Volatile Organic Compounds The device measures and tests the outgassing (emissions) of materials under defined conditions. It analyses which substances are released into the air by a given material. Typical applications include: - Emission testing of plastics, components, materials - Automotive interior material testing (odor / pollutants) - Building products & furniture emission measurement - Packaging, textiles, adhesives, paints - Quality control and standard testing (e.g. ISO / VDA / DIN) The test system generates precisely defined temperature, humidity, and air conditions. Emissions are extracted from the test space using a carrier gas (e.g. nitrogen or air) and can subsequently be analyzed using appropriate measuring equipment. Device features / Equipment: - Stainless steel emission test chamber (hermetically sealed) - Temperature and climate control - Carrier gas system for emission measurement - Automatic process control with touch panel - Programmable operation / continuous operation possible - Sampling ports for VOC analysis - Industrial-grade construction (suitable for laboratory and continuous operation) Technical data for temperature testing: - Temperature range: +20 to +130 °C - Temporal temperature deviation at chamber center: ±0.1 to ±0.3 K - Spatial temperature uniformity: ±0.1 to ±0.5 K - Temperature change rate (according to IEC 60068-3-5): Heating: 0.4 K/min Cooling: 0.3 K/min - Temperature change rate (average, with enhanced heating and cooling capacity): Heating up to +65 °C: 1.5 K/min Cooling from +65 °C to +20 °C: 1.3 K/min Technical data for climate testing: - Temperature range: +20 to +130 °C - Dew point range: +5 to +60 °C - Relative humidity range: 5 to 95% RH - Temporal temperature deviation: 0.1 to 0.3 K - Temporal humidity deviation: -3 to 3% RH Dimensions EmissionEvent VOC/240 External dimensions (unit): Width: approx. 1350 mm, Depth: approx. 2500 mm, Height: approx. 1985 (2190) mm Internal dimensions (test space): Emission test chamber: 200 l Gross test chamber volume: 240 l Net test chamber volume: 208 l Max. test sample load: 80 kg Internal dimensions VOC/240: Width: approx. 600 mm, Depth: approx. 560 mm, Height: approx. 600 mm Electrical: Voltage: 3/N/PE AC 400 V ±10% / 50 Hz Nominal power: 12.1 kW Nominal current: 30 A Protection class: IP54 Refrigerant: R134a – 2.5 kg Weight: approx. 1080 kg Important information for you as the buyer: The following procedures are carried out on the chambers we offer prior to sale: 1. Functional inspection and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Following successful inspection, a documented trial run is carried out Condition: used Scope of supply: (see picture) (Technical data and specifications subject to change and errors!) For further questions, feel free

Condition: excellent (used), Year of construction: 2019, operating hours: 200 h, functionality: fully functional, total length: 5,700 mm, total width: 1,710 mm, total height: 2,780 mm, operating temperature: 95 °C, Equipment: cooling unit, For sale, as new and in a great functional condition A continuous synthesis reactor for organic compounds, based on microwave system, built in ATEX class II norm Sales price 120 000 CHF ex works (built new for 500 000 CHF) 3 raw material tanks, 100 L each 2 top entry agitators 1 CIP tank 2 finished product tanks, 50 L each 3 pumps 1 microwave with 2 generators (2450 MHz), 12 kW power output, fully conform to EU safety standards Djdpfxovy T Ivj Ahnouu All high quality materials steel 1.4404, PTFE, Duran glass or similar High quality components (tanks, pumps etc), sensors and transducers, made in EU - full list available PLC controlled via 24V DC, with dedicated software Documentation available The UNIT has been now professionally decomissioned and is stored on palettes, ready for pickup. Purchase of selected components (such as tanks or pumps) is also welcome.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, cooling capacity: 800 kW (1,087.70 HP), type of input current: three-phase, type of cooling: air, overall weight: 6,400 kg, input voltage: 400 V, Equipment: compressor, type plate available, For sale are two high-performance industrial refrigeration units from GEA Grasso (ammonia / NH3). Video of the units in operation is available. These systems come from a professional application and are in excellent, well-maintained condition. Ideal for industrial refrigeration, food processing, logistics centers, or large-scale cooling requirements. Technical specifications: Manufacturer: GEA Refrigeration Germany GmbH Model: Grasso FX LP 800 Year of manufacture: 2012 Refrigerant: NH3 / R717 2 units available Including control cabinet Including heat exchanger Including oil cooler Including recooler Operational video available Permissible operating pressure: HP 28 bar / LP 16 bar Net weight: 6,400 kg per unit Features: ✔ Complete control cabinet ✔ Heat exchanger ✔ Oil cooler ✔ Recooler / outdoor units ✔ Multiple compressors (compound system) ✔ Industrial-grade design ✔ Nameplates attached Condition: Djdoyxvwvepfx Ahnsuu Units are currently still installed Very well-maintained condition Dismantling will take place within the next 3 months Availability: 2 identical units available Sale of individual units or both as a package possible “Loading can be arranged”

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 95 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 650 mm, turning length: 5,000 mm, total length: 8,500 mm, total width: 1,800 mm, total height: 1,800 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 8,000 kg, spindle mount: MK 6, The PORĘBA TPK-90/5M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: on stock available, under power, technical inspection anytime after appointment Technical data: Dodpfxowk Iq Ej Ahnouu - distance between centers/turning length: 5000 mm - turning diameter over bed: 930 mm - turning diameter over support: 650 mm - turning diameter in bridge recess: 1200 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 7500 mm width: 1800 mm height: 1800 mm total weight: 7300 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-600 mm, with rollers - MULTIFIX quick change tool post

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,350 mm, turning diameter over bed slide: 1,350 mm, turning diameter over top slide: 1,000 mm, turning length: 5,000 mm, total length: 7,500 mm, total width: 2,130 mm, total height: 1,550 mm, rotational speed (max.): 630 rpm, rotational speed (min.): 5 rpm, workpiece weight (max.): 11,000 kg, spindle mount: MK 6, The PORĘBA TR-135B1/5M universal lathe has been comprehensively rebuilt and modernized and has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: in stock, under power, ready for technical acceptance. Technical data: - distance between centers/turning length: 5000 mm - turning diameter over bed: 1350 mm - turning diameter over support: 1000 mm - turning diameter in bridge recess: 1650 mm - spindle bore diameter: 120 mm - Power feed on compound slide for machining tapers, conical parts, 1°- 90°, up to 450 mm - maximum workpiece weight between centers: 8,000 kg - maximum workpiece weight between centers + 1 steady: 10,000 kg - maximum workpiece weight between centers + 2 steadies: 11,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): Dedova Elaepfx Ahnjuu longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power [kW]: 22/41 (1st gear / 2nd gear) - overall dimensions: total length: 7500 mm width: 2130 mm height: 1550 mm total weight: 13200 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover, chip tanks Additional equipment available for price upgrade: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post