Used Concentricity Test Instrument for sale (11,913)

Condition: used, Year of construction: 2006, workpiece diameter 5 - 1.000 mm Fodpfx Aozkvvyspwogf module range 0,2 - 25 helix angle < 90 ° Control Wenzel GearTec faceplate diameter 750 mm x-axis 1.200 mm y-axis 550 mm z-axis 1.000 mm total power requirement 6,5 kW weight of the machine ca. 11 t dimensions of the machine ca. 3,30 x 3,15 x 2,70 m Software: BMain, FPDFPPostAction, GrafTool, TAlign, TAnalyse, TApplication, TCali, TCut_INPUT, TCut_MEAS_EVAL, TGear_INPUT, TGear_MEAS_EVAL, THob_INPUT, THob_MEAS_EVAL, TMesblatt, TPlot, TRoot_INPUT, TShaft_INPUT, TShaft_MEAS_EVAL, TStat, TStylus, WMI, wingeco.

Condition: excellent (used), Vötsch Type: VC 7018 Vötsch Climatic Test Chamber VC 7018 Water-Cooled Touch Panel Control Unit On the touch panel control unit, all control and operating commands can be triggered by simply touching the function symbols. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Ports The test chamber is equipped with port holes on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Feedthrough included in standard equipment R1: NW 125 mm L1: NW 50 mm Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Characteristics for temperature tests: Temperature range: -70°C to +180°C Temperature ±0.1 to ±0.5 K Spatial ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Characteristics for climatic tests: Temperature range: -10°C to +95°C Humidity range: 10% to 98% r.h. F. Fodpfozh Huhjx Apwegf Temperature deviation over time in the center of the usable space ± 0.1 to ± 0.3 K Temperature deviation over space ± 0.5 to ± 1.0 K Temperature gradient 1 to 2 K Humidity deviation over time in the center of the usable space ± 1 to ± 3 %RH Electrical connection: Nominal voltage: 3/N/PE AC 400V ±10 50Hz Nominal power: 5.9 kW Nominal current: 12.0 A Connection cable: 3.5 m Fuse protection: 16 A slow-blow, provided by the customer Refrigerants: R-404A and R-23 Test chamber capacity: approx. 190 liters Weight: approx. 460 kg net For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Liebisch Type: S 1000 A-TR / 42016211 Chamber-type testing equipment with a 1000-liter test chamber volume for salt spray tests. Constamatic® TR This series includes automatically controlled chamber-type testing equipment of type A-TR. The internal device control is operated via a touchscreen. All functions are displayed on a touchscreen with intuitive user guidance. Technical data: Device type: S 1000 A-TR External dimensions of the housing: (W x D x H in mm) 2600 x 1120 x 1210 Internal dimensions of the test chamber: (W x D x H in mm) 1535/1425 x 800/780 x 660/650 Max. load of the sample holder: 10 kg / shelf 10 kg Operating voltage: 230 V +6/-10% Connected load S: 2700 W Control range for humidification S: up to 70°C Control range for test chamber K: up to 50°C Control range for test chamber S: up to 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Over-temperature protection: yes Volume of test chamber: 1000 liters Fgodpfezh Ht Rox Apwjf Stock of test solution: approx. 150 liters Test solution consumption / hour: approx. 0.7 – 1.0 liters Water filling of the base pan: 15 liters Weight: 450 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Including metal struts to increase the floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Fgjdpfxjzh Htws Apwjf Weight: 550 kg For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in the stabilized state according to IEC 60068-3-5, depending on the test chamber temperature ± 1 K over time Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the support grid Water level = 0 mm The water level is at the top edge of the support grid Data for spray device, standard Number of spray nozzles 6 Spray volume per nozzle 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles 6 Spray volume per nozzle 4.5 l/min Additional flooding nozzles 2 Spray volume additional nozzle 6 l/min Compressed air consumption approx. 3 m³/h Data for water tank with preheating Volume approx. 2000 l Temperature range for preheating +5°C to +40°C Temperature change duration Cooling from +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Data for installation and operation: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Feedthroughs 1 feedthrough ∅ 50 mm, installed on the left Test chamber volume: approx. 500 liters Fgodpfx Apezh D S Rjwsf Refrigerant R-404a Electrical connection: Rated voltage 3/N/PE AC 400V ± 10% 50Hz Rated power approx. 26 kW Rated current approx. 44.0 A (neutral conductor loaded) Fuse 63 A gG, on-site Weight approx. 890 kg net For your safety as a buyer, the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Zwick / Roell Type: LTM10 Maximum testing frequency: 100 Hz, depending on the amplitude Dynamic testing force in tension/compression: 10 kN Static testing force in tension/compression: 7 kN Fsdpfx Apjzh D R Hewegf Piston stroke: 60 mm Positioning and repeatability accuracy: +/- 2 µm Speed range: 1 mm/min - 1 m/s Testing space height without force sensor: 1170 mm Weight with linear motor: 1065 kg (without control unit) Maintenance: according to maintenance instructions, partially performed by Zwick/Roell Accessories: Screw chucks, software (TestXpert research) Connection: 400V 50/60 Hz 32A 3Ph/PE Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Weiss Type: WK-600/70 (I)-(II) 2 G EEx /22605147 Weiss Climate Chamber, Water-Cooled (Test chamber, explosion-proof) INERTIZATION WITH NITROGEN / EXPLOSION-PROOF TEST CHAMBER Technical Data: Test chamber designation: WK-600/70 (I)-(II) 2 G EEx External dimensions with hinges and door lock: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock: Height 1995 mm, Width 1000 mm, Depth 1660 mm Test chamber volume: approx. 600 liters Cold/Heat operation: -70 to 180°C Climate operation: 10 – 95°C Humidity: 10...98 % RH Temperature change per unit of time: Cooling: approx. 2.5 K/min Heating: approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 14 kW Rated current: 25 A Fuse (on customer's side): 32 A, slow-blow Permissible weight of test specimens: Total load of the shelf supports: 80 kg Test chamber floor: 80 kg, insert shelf: 40 kg Weight: 800 kg Refrigerant: R 404A/R 23 (Evaporator of the air conditioning system has been replaced) For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) Fgjdpezh D Ryjfx Apwjf (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Weiss Type: SWT 200/400 Weiss spray and splash water test cabinet This cabinet is used to test the ingress of water into enclosures. In conjunction with a timer, the test cycle can be automated with an adjustable test time from 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system can reduce water consumption to a minimum. Features Glass door with wiper Pneumatic drive of the swivel nozzle Adjustable swivel angle Replaceable swivel nozzles Fsdpfx Apjzh D Rmswogf Nozzle holder swivels and is replaceable Adjustable water flow rate and measurement Control of the test duration Data for mechanical stress Max. load with test specimen (evenly distributed over the area) Permissible test specimen weight for the test specimen holder (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection class tests Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Operating data Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 kW Rated current 6.0 A Weight: 375 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: good (used), CTS Type: T-70/600/S Water-cooled temperature testing chamber Refrigerant: Converted to R-452A Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface Fgsdpfx Aezh D E Repwof - Free switching channels for on-site control of the test item Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20 °C approx. 2500 W at +0 °C approx. 1800 W at -40 °C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test item, without radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions: height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions: height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Rated current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: used, Year of construction: 2021, Canon CX-1 system, including computer, packed in its original manufacturer’s boxes. Fodpezmxqrefx Apwjgf Serial number: 210141 – Year of purchase: 2022 The system was purchased for a brief clinical study and has seen very limited use; it is in excellent condition.

Condition: used, Test pump, pressure device, measuring device, pressure pump, pressure test pump -Test pump: mobile pressure device -Pressure gauge: 16 bar -Container: volume 95 liters -Dimensions: 1270/490/H1060 mm -Weight: 89 kg Fgodpfx Apeh N Timswef

Condition: good (used), test mandrel, tool holder, milling holder, milling tool -Manufacturer: Bahmüller, boring bar -Length: L= 158.406 mm -Radius: R= 19.937 mm -Recording: HSK50 Fjdpjvz Urxofx Apwsgf -Dimensions: Ø 50 x 183 mm -Weight: 1.6 kg

Condition: used, Test device, test device for personal earthing, Safety Pips -Manufacturer: Wolfgang Warmbier, test device for personal earthing, original packaging Fgsdpfx Aotuyc Depwjf -Type: Safety Pips -Article No.: 7100.181 -Operating mode: Battery operation 9V -Dimensions box: 115/110/H70 mm -Weight: 0.2 kg

Condition: good (used), -Testing device for electrical equipment Fgodjb A Ivzjpfx Apwef -each with isolation transformer -Number: 7 available -Price: per piece

Year of construction: 2022, condition: good (used), Test stand for filter testing, filter testing, filter test system, filter measurement system, filter test system -Manufacturer: Lorenz, Filter Test System Type FMP 03 with accessories -Filter holder: Type FH 143/149 -Accessory case: with extensive contents Fjdpfx Apeyk Ahwowjgf -Individual components/accessories: see photos -Dimensions: 600/560/H975 mm / 640/460/H1130 mm / 430/340/H125 -Weight: 146.3 kg

Condition: used, Test pump, pressure device, measuring device, pressure pump, pressure test pump -Manufacturer: Ridgid, mobile pressure test pump -Type: 1425 pump ss: 50bar/725psi -Dimensions: 720/170/H300 mm -Weight: 10 kg Fsdpfx Ajilq Hmopwjgf

Condition: good (used), Testing device for extension cables -Socket tester -Testing device for: extension cables, table sockets Fjdpfxeb A Iufs Apwsgf -Weight: 30 kg

Condition: good (used), Year of construction: 1965, Measuring machine, manual Erichsen depression testing machine, depression testing machine, sheet metal testing machine, manual paint testing machine -Manufacturer: Klingenthal Fgjdpfx Aew H N Dlepwsf -Type: 05 -Manual paint testing machine: Erichsen pitting tester -Maximum sheet thickness: 2.0 mm -Accessories: see photos -Test ball: Ø 20 mm -Die: Ø 27 mm -Dimensions: 460/360/H335 mm -Weight: 20.5 kg

Condition: used, Test pump, pressure test device, measuring device, pressure test pump -Manufacturer: Junginger, mobile extraction device -Pressure display: 40 bar -Dimensions: 790/480/H775 mm Fgodpfx Aofnaaiopwof -Weight: 47 kg

Condition: used, Test clamp for electricity -Number: 3x available -Price: per piece -Weight: 4.2 kg Fgodsb Uhr Tspfx Apwjf

Condition: used, Test pump, pressure device, measuring device -with: pressure display -Max. Pressure: 60 bar -High pressure hose Fgedpschyxuofx Apwof -Number: 2x devices available -Price: per piece -Dimensions: 490/165/H260 mm -Weight: 7.2 kg

Condition: used, Gauge block box, gauge blocks, parallel gauge blocks, test pin set, test pins, plug gauge Fjdpfx Apjg T I Nhowegf -Manufacturer: Cary, plug gauge test pin set: 3.01 - 3.49 mm -Content / nominal dimensions: see photos -Dimension box: 135/85 / H60 mm -Weight: 0.3 kg

Condition: excellent (used), Measuring range up to: 1000 mm Measuring accuracy: 1 µ Fgsdpfx Aszibt Ispwsf Overall height: 1400 mm Space requirement: 330 x 300 mm Weight approx.: 30 kg

Condition: excellent (used), Kübrich Kübrich Test Systems 48V Belt Starter Generator - Component Test Bench Details of the test bench: (See Figure 13) Frame with (1) Mounting device for a belt starter generator (2) Load machine (3) Belt (4) MP1: Control cabinet (5) MP3: Control cabinet for control, interface panel with main switch, I/O (6) MP2: Control cabinet with Simotion (7) MP4: Control cabinet with DC-DC converter (8) H3: Measuring technology box (9) H4: Interface box Intended use: The test bench is used for conducting tests on belt starter generators during development. Technical data: Electrical connection data Power supply: 400 V / 32 A Battery simulation: 0 - 60 V Current: 0 - 250 A (continuous) Current: 330 A (briefly, less than 1 s) Control voltage: 24 V Mechanical performance data according to the data sheet of the load machine Note that a gear ratio of 1:2 to the test specimen shaft must be observed. Rotational speeds: Load machine: Manual operation: 0 - 50 1/min Automatic operation: 0 - 10,000 1/min Test specimen motor: Manual operation: 0 - 100 1/min Automatic operation: 0 - 20,000 1/min Dimensions and weight Width: 850 mm Height: 1386 mm Length: 1687 mm Weight: approx. 1.2 t Condition: used Scope of supply: (See Figure) (Changes and errors in the technical data and details are subject to change!) Fgjdpfozhkb Ssx Apwef We will gladly answer any further questions you may have by telephone.

Condition: used, “functionally tested; item originates from the dismantling of equipment at an automotive supplier” Quantity: 5 available Fedpfxjzh A D Es Apwogf Manufacturer: Stahl Prüftechnik Type: FR-110.01A Function: Testing device for functional and process monitoring in industrial applications Power supply: 230 V AC Display: LED / Digital display Housing: Metal Application: Quality assurance, leak testing, process control