Used Torque Tester for sale (2,704)

Condition: used, tester, torque wrench, torque tool, torque wrench tester, torque wrench tester -Manufacturer: Norbar, Digital torque tester with case -Type: TruCheck 2 Plus -Part No.: 43521 Ihsdpfx Asr H Nlzsbreu -Measuring range: 3 - 65 Nm -Mounting: 3/8" -Accessories: see photos -Dimensions: 205/60/H110mm -Weight: 3.8 kg

Condition: excellent (used), Professional ATEQ F620 leak and pressure tester, designed for quality control and production testing. The device enables precise pressure-based (air) leak testing, ideal for applications in automation, pneumatics, automotive, and serial production. Very good technical condition – the device powers up correctly and is ready for use. Current calibration/service: 16.04.2024 (ATEQ) – visible on seals and labels. Features and equipment: • clear LCD display • automatic ZERO function • test programs Ijdpeyc H T Iefx Abrjhu • communication ports (RS232 / MODBUS / PROFIBUS – depending on configuration) • analog and digital outputs • integrated pneumatic system with filter • robust industrial housing • 230 V power supply Laboratory and production-grade equipment – this is not workshop or amateur equipment.

Condition: used, Chroma Type: ATE 17020 The Chroma 17020 is a highly professional, modular test system for lithium-ion & other battery pack qualification. Particularly strong in: - Lifetime testing, BMS verification, and validation of complex charging cycles - High energy recovery – up to 85% efficiency - Flexible expansion through numerous channels or higher current ranges - Enterprise deployment with extensive safety features & data persistence Technical data – Chroma ATE 17020 PTS Feature Specification Ijdpowwrxajfx Abrehu Model: Chroma ATE 17020 PTS System type: Regenerative battery pack test system (charge/discharge test) Channel output: 600 W to 60 kW (modular and scalable) Total output: Up to 600 kW (depending on configuration) Voltage range: 20 V / 60 V / 100 V / 200 V / 500 V Current per channel: Depending on module: from a few amps up to >300 A per channel Parallel operation: Yes, for higher current up to 2,600 A Current and voltage accuracy: ±(0.05% of reading + 0.05% of range) Power accuracy: ±0.1% Transition time (charge/discharge): < 50 ms Sampling rate (measured data): up to 50 kHz (with BatteryPro) Data logging: Cyclic, 10 μs – 1 s / memory for 60 min power failure Test modes: CC, CV, CP, CC-CV, DCIR, pulse, drive cycle, dynamic profiles Number of channels: Up to 60 channels (expandable) Communication: CAN, S-Bus, Ethernet, USB Software: Chroma BatteryPro (test programming, real-time monitoring) Protection functions: OVP, UVP, OCP, UCP, OTP, reverse polarity, wire loss, delta V/I, etc. Energy recovery: Yes – up to 85% energy efficiency, grid-friendly (THD < 5%) Cooling: Fan cooling, low waste heat due to energy recuperation Temperature monitoring: Optionally integrable, range 0–90°C ±2°C Dimensions & weight: Depending on configuration (e.g. 19″ rack, approx. 300 kg) Mains connection: 3-phase, 400 V AC (depending on model) Applications: E-mobility, battery development, quality assurance, cell research Weight: approx. 455 kg Condition: used Scope of delivery: (See picture) (Specifications and technical data are subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), Professional, mechanical analog hardness tester for measuring the hardness of metals according to the following scales: Brinell / Rockwell B / Rockwell C / Vickers The device operates without power – ideal for fast measurements in the field, during production, or for quality control. Features: • Original set with carrying case, manual, and accessories • BRINELL, ROCKWELL B and C, and VICKERS scales • Model: No. 3 / Instrumatic Universal Härteprüfgerät • Manufacturer: C.V. Instruments Ltd, Bradford, England Iodpfxjvbwzij Abrehu • Mechanical dial indicator – measurement without power supply • Clear analog measurement scale ⸻ Set includes: • Hardness tester • Carrying case • User manual in German • Set of adapters and bushings (visible in the set) Condition: Like new / warehouse stored Equipment unused or tested only a few times – no signs of wear.

Condition: used, Year of construction: 2007, voltage 400 V current capacity 800 VA frequency 50 Hz weight of the machine ca. ca. 355 kg In our opinion, the machine is in good used condition and can be viewed under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Iodpfsxwdxcox Abrehu Changes and errors in the technical data and information as well Subject to prior sale!

Condition: new, functionality: fully functional, Year of construction: 2011, New, unused transmission with torque converter, drive axle including brake and brake cables for sale. The transmission comes from warehouse clearance. Jungheinrich part no. 50060439, Steinbock part no. 9808210, Graziano type TXL30 GTUK. The transmission has also been used by other forklift manufacturers. Ihsdpfx Abjylb Aierou

Year of construction: 1982, condition: used, Technical details: z-travel: 260 mm pressure capacity max.: 49 - 7355 (Prüflast) N checking height: 260 mm workpiece weight: max. 160 kg throat: 200 mm interface: RS 232 voltage: 230V / 50Hz V total power requirement: 200 VA machine weight approx.: 250 (ohne Unterschrank) kg Iedju N Avxepfx Abrshu dimension machine xH: 0,7x 0,6 x 1,8 (mit Unterschrank) m The hardness tester with depth measurement operating mode is on sale with a base cabinet from Emco for hardness testers. The device is suitable for testing the following methods(Specifications according to manufacturer): Metals according to Brinell, Vickers, Rockwell Plastics testing according to DIN 53 456 Other materials for testing only after consultation with the manufacturer. Test loads: electronically controlled via microprocessor, DMC and DC motor for M4R-075 = 49 to 7355 N Test table height adjustable via handwheel; Ø 90mm Test bench mounting according to DIN 51 225 = Ø 25mm Operation and programming via control panel accessories: a few test tables and plates (comparable with the pictures) *

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Safety Tester for High Voltage Test Station - EATON Sefelec 506-S The device was purchased in 2023 and is in excellent condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC Optional: 2TΩ range PE testing at 32A - 8VAC, measurement 0 ... 1Ω Optional: testing current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7", 16 million colors, for programming and display of current tests and results Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability Integrated DSP for higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength) Iedpfxsxqxt Is Abrshu Shipping is possible upon arrangement. #8312-1

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Safety tester with scanner for high-voltage test station - EATON Sefelec 506-S - EATON Sefelec 64-SC The devices were purchased in 2023/2024 and are in top condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is controlled via DSP. This technology offers the operator optimal stability and repeatability of measurements. The high accuracy and measurement speed are tailored to the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The 7” touchscreen of the new SEFELEC model series impresses with simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Voltage withstand at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2TΩ range PE measurement at 32A - 8VAC, measurement 0 ... 1Ω Optional: test current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7”, 16 million colors, for programming, as well as for displaying ongoing tests and results Integrated ARM dual core control & Nand 3D technology for optimal accuracy, stability and repeatability Integrated DSP enables higher test speeds Ihedsxqxw Tepfx Abrju Large internal memory for storing configurations and test results Completely compliant with IEC 61010-2-034 (safety requirements for test and measurement equipment for insulation resistance measurement and equipment for voltage withstand testing) Shipping is possible subject to prior agreement. #8312-2

Condition: good (used), Year of construction: 1984, Tiede Universal U550 GW Magnetic Electric Crack Tester Manufacturer: Tiede GmbH Type: U550 GW Type: Magnetic-electric crack tester Rated operating current I 5400 A alternating current seats resp. 3800 A alternating current effective, adjustable in 8 steps Flow rate Ø: 8000 Aw full wave direct current. Adjustable in 8 steps, measured according to DIN 54 131 Mobile magnetizing coil lights Ø 800 Feedthrough Ø: 5000 Aw with alternating current adjustable in 8 steps, gemsen according to DIN 54131 Year of construction 1984 Accessories/Special equipment Electronic magnetization controls Demagnetization device Support rollers Darkening cabin Main machine dimensions total length mm 8.000 total width mm 2.500 Total height mm 2.500 Isdpfoifpg Ajx Abrehu Working area remarks Nominal diameter mm ~5.500 Field of application: testing of crankshafts. Item condition: used For further technical data please refer to the machine card. Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Pressure tester, pressure gauge, manometer, test manometer, compression gauge -Manufacturer: TGL, pressure tester -Pressure range: 0 to 25 bar -Case dimensions: 330/200/H140 mm -Weight: 3.6 kg Iodpfoycczuex Abrjhu

Condition: good (used), Pressure tester, pressure gauge, manometer, test manometer, compression gauge Iodpfx Aoyccvfobrjhu -Manufacturer: Hydrotechnik Limburg, pressure tester -Pressure range: 2x 0 to 10 bar -Dimensions: 260/150/H205 mm -Weight: 3.2 kg

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, Klingelnberg ZW 301 Gear Measuring Machine with Evaluation Computer Double-flank gear measuring machine with 4-position indexing table - Spur gear - Internal gear - Gear shaft - Computer (evaluation via industrial PC with fully automatic parameter calculation, quality determination, and classification) Workpiece data: Table load including fixture, max. 100 kg Load on support plate/vertical slide including fixture, max. 80 kg Workpiece knife with counterholder on measuring and feed slide, max. 300 mm Workpiece knife with counterholder on machine bed, max. 300 mm Device data: Heidenhain LIF 101 position measuring system Center distance min./max. 45/300 mm Table diameter 150 mm Table height above floor 950 mm Measuring pressure min./max. 5/30 daN Total connected load of the test device: 0.75 kVA Total space requirement: LxWxH 1900 x 1200 x 2200 mm Net weight: 750 kg Ihodpfx Aov Ic R Aebrju PC, as well as some master wheels with common modules. Weight: 750 kg

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 51720166-1, overall weight: 400 kg, Zeltwanger Leak Testing System F56BEV – Year of Manufacture 2018 For sale is an automated leak testing system from the renowned manufacturer Zeltwanger. The F56BEV system is designed for precise and reproducible leak and tightness testing in industrial production environments, making it ideal for both serial and random-sample inspections. Technical Data: Manufacturer: Zeltwanger Type / Model: Leak Testing System F56BEV Project No.: 51720166 Machine Number: 51720166-1 Year of Manufacture: 2018 CE Marking: Present Electrical Data: Connection: 230 V / 1~ / 50 Hz Max. Fuse Protection: 16 A Max. Power Consumption: 10 A Power Input: 0.5 kW Supply Line: 3 × 1.5 mm² Ihjdpfx Ajydl Dnobrju Control Voltage: 24 V DC Mechanical / Pneumatic Data: Machine Weight: approx. 400 kg Pneumatic Supply: min. 5 bar (oil-free compressed air) Advantages & Features: High-precision leak and tightness testing Robust industrial-grade design Low energy consumption Compact construction Easy integration into existing production lines Proven Zeltwanger quality Typical Applications: Automotive industry & suppliers Plastics and metal processing Medical technology Industrial and special machinery construction Quality assurance / end-of-line testing

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 51720166-2, Zeltwanger Leak Testing System F56BEV – Year of Manufacture 2018 For sale is a high-quality leak testing machine from the renowned manufacturer Zeltwanger, known for precise and reliable testing and automation solutions in industrial applications. The F56BEV system is ideally suited for automated leak testing of components and assemblies, impressing with its compact design, easy integration, and robust industrial construction. Technical data: System designation: Leak testing F56BEV Project No.: 51720166 Machine No.: 51720166-2 Isdpfx Aboydd Uxjrehu Year of manufacture: 2018 CE marking: available Electrical data: Supply voltage: 230 V / 1~ / 50 Hz Max. fuse rating: 16 A I-Max: 10 A Power consumption: 0.5 kW Supply cable: 3 × 1.5 mm² Control voltage: 24 VDC Mechanical / Pneumatic data: Machine weight: approx. 400 kg Pneumatic supply: min. 5 bar (oil-free compressed air) Highlights: - Proven Zeltwanger quality - Ideal for series and single-part testing - Robust industrial construction - Low power consumption - Compact design - CE compliant Fields of application: - Automotive industry - Supplier industry - Medical technology - Plastics and metal processing - General custom machine engineering

Condition: used, Adixen / Alcatel Alcatel ASM 122D Helium Leak Detector – mobile For sale is a professional Adixen / Alcatel ASM 122D helium leak detector from industrial use. This device is designed for highly precise leak detection and leak testing with helium and is used in industrial settings, research, and laboratories. It allows for the detection of extremely small leaks in vacuum systems, pipelines, valves, vessels, and assemblies. The leak detector features an integrated forepump and turbomolecular pump, various operating modes (vacuum / sniffer), as well as a digital display with automatic functions. Technical data (excerpt): Manufacturer: ALCATEL Model: ASM 122D Measurement principle: Helium mass spectrometer Detection limit: up to approx. 1 × 10⁻¹² mbar·l/s Power supply: 200–240 V / 50–60 Hz Power consumption: approx. 800–1200 W Made in France Iedpfx Absyapwksrohu Weight: approx. 100 kg Condition: used Scope of delivery: (see picture) (Specifications and information subject to change and error!) If you have any further questions, please feel free to contact us by phone.

Condition: used, Adixen Adixen ASM 142 Helium Leak Detector Description: For sale is an Adixen ASM 142 helium leak detector. This device is suitable for highly precise leak detection in vacuum and pressurized systems and is used professionally in industry, laboratories, and research. The ASM 142 is equipped with an integrated turbomolecular pump, various measurement and test modes, as well as a clear digital display of the leak rate. Thanks to its sniffer mode and automatic test cycles, the device offers flexible application possibilities. Highlights: - Very high measurement accuracy - Vacuum and sniffer operation - Graphical & acoustic leak indication Ihjdpoyankisfx Abrou - Robust industrial design on casters Technical Data: Test gas: Helium Dimensions: approx. 110 × 60 × 70 cm Detection limit: down to approx. 5 × 10⁻¹² mbar·l/s Power supply: 230 V / 50–60 Hz Power consumption: approx. 1000 W Weight: approx. 100 kg Condition: used Scope of delivery: (see picture) (Specifications subject to change and possible errors!) For further questions, please feel free to contact us by phone.

Condition: ready for operation (used), Approximately seventy (70) combined measuring and testing devices Gossen Metrawatt for standards-compliant safety testing of electrical equipment are available. 1) Protective conductor resistance (RSL): measuring range: 0Ω-2.100Ω with resolution: 1mΩ, measuring range: 2.11Ω-31Ω with resolution: 10mΩ, test voltage range (DC): 4.5V-9V, min. test current (DC): 200mA. 2) Four-wire measurement (Kelvin measurement). 3) Insulation resistance measurement (RISO): measuring range: 0.05MΩ-1.5MΩ with resolution: 1kΩ, measuring range: 1.01MΩ-10MΩ with resolution: 10kΩ, measuring range: 10.1MΩ-310MΩ with resolution: 100kΩ, test voltages (DC): 50V/100V/250V/500V. 4) Substitute leakage current measurement (IEA/IEGA): measuring range: 0mA-21mA with resolution: 10µA, measuring range: 20mA-120mA with resolution: 100µA. 5) Patient leakage current (medical version): measuring range: 0µA-310µA with resolution: 100nA, measuring range: 0.3mA-2.1mA with resolution: 1µA, measuring range: 2mA-11mA with resolution: 10µA. Including as-new spare parts, 6x housing covers, hinge rods and SI+ modules. Documentation available. An on-site inspection is possible. Ihjdpfx Absycigwsrsu

Condition: ready for operation (used), A bucket drop tester Lansmont for performing standardized drop tests to evaluate product shock resistance is available. Test load: 80kg, max. package depth: 610mm, drop height range: 305mm-1800mm, flatness accuracy: +/-2°, guide rod diameter: 76mm, plate thickness: approx. 13mm, machine dimensions X/Y/Z: approx. 920mm/1410mm/2640mm, weight: approx. 230kg. Documentation available. An on-site inspection is possible. Isdexhnr Uepfx Abrohu

Year of construction: 2023, condition: ready for operation (used), A fully automatic SPEA bed-of-nails in-circuit tester for SMEMA production lines is available. Type: inline ICT tester, slots: 2x768/Core, conveyor width range: 50mm-380mm, conveyor length: 450mm, resistance measurement range: 1mΩ-1GΩ, capacitance measurement range: 0.5pF-1F, inductance measurement range: 1µH-1H, dimensions X/Y/Z: approx. 900mm/1000mm/1750mm. Including various feeders (8x2-56). Documentation available. An on-site inspection is possible. Ijdpfexghn Hsx Abrohu

Year of construction: 1997, condition: ready for operation (used), Suitable for testing steel drums for tightness, drum diameter: 574-598mm, max. drum weight: 30kg, drum temperature: 10-50°C, with documentation. Ihodpjm H Uqksfx Abrou

Condition: used, Year of construction: 1996, diameter / mm workpiece length / mm length / mm MITUTOYO SURFTEST SV-500 Roughness tester with OLZE measuring plate Size: 600 x 600 x 80mm Target µm: 16 Actual µm: 10,00 Own weight: 85kg Ihsdpetvm Smjfx Abrsu Information on the scope of delivery The package contains only the ordered product. Additional decorative items or other items shown in the product images are not included in the delivery.

Condition: excellent (used), Professional Mitutoyo surface roughness tester designed for precise measurements in quality control, measurement laboratories, and in manufacturing environments. This is an industrial metrology-grade device, widely used in the automotive sector, CNC machining, toolrooms, and metalworking facilities. The 178-562-11D model enables fast and repeatable measurement of roughness parameters in compliance with current standards. Robust construction, intuitive operation, and high measurement accuracy are features for which the Mitutoyo brand is known. Technical condition: used, fully functional Visual condition: very good (as shown in the photos) Power supply: rechargeable battery Manufacturer: Mitutoyo (Japan) Ihsdpoyc Rwdofx Abrou Included: • Mitutoyo 178-562-11D surface roughness tester • Transport case • Full set exactly as shown in the pictures

Condition: excellent (used), Pharmatron 5Y tablet tester Ihodpfeiy Nm Rsx Abrsu The hardness tester is ideal for measuring the breaking of tablets. Cycle time 25 tablets / 3mins, up to 33mm tablet diameter, 1Ph

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) Ihedpoyc H I Sefx Abrju • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg