Used Conical Round Moulder for sale (8,493)

Condition: excellent (used), functionality: fully functional, SCM T120C Spindle Moulder with Sliding Table Specification: • Condition: Used, fully serviced • Manufacturer: SCM • Model: T120C • Spindle diameter: 35 mm (option to change to 30 mm – extra cost PLN 1,500) • Motor power: 4 kW • Star-delta motor starting • Left/right spindle rotation • 4 belt-driven speeds: 2,900/4,400/6,000/7,200 rpm • Manual up/down adjustment • Foot brake and foot spindle lock • Longitudinal sliding table, suitable for tenoning, length: 105 cm Dodpfx Aewthmxjh Uskw • Original paintwork • Overall dimensions: 100 x 110 x 110 cm (L x W x H) Additional information: • Excellent original technical and visual condition • Photos illustrate the actual condition of the machine • Possibility to test the machine on-site.

Condition: good (used), Year of construction: 1998, functionality: fully functional, Four-side planer Weinig Hydromat 23, finger jointing machine 8 spindles, Working width: 230 mm, Working height: 160 mm, Spindle diameter: 50 mm, Feed: 7.5 kW / 6–36 m/min, Spindle arrangement: 1-Bottom (7.5 kW) 2-Right (7.5 kW) 3-Left (7.5 kW) with profile jointer 4-Right (7.5 kW) with profile jointer 5-Top (7.5 kW) with hydraulic clamping 6-Bottom (30 kW) with hydraulic clamping 7-Top (7.5 kW) with hydraulic clamping and straight jointer 8-Bottom (7.5 kW) with hydraulic clamping and straight jointer. Hard coating. Dksdpfsxqh E Hjx Ah Usw Two powered rollers in the table.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 0803024, 4-SIDED PLANKER-MOULDER 5 REINFORCED MOTOR TOOL HOLDERS & 3.00 M CHROME TABLE Brand: LEADERMAC Type: SMARTMAC 523 Model: LMC-523SU Serial No.: 0803024 Year: 2008 (Photos taken before servicing & cleaning) MAKING CAPACITIES: - 4-sided planer and moulder - Max. cross-section: 130 x 230 mm - Thicknesses: 10 to 130 mm - Widths: 15 to 230 mm - Minimum length for single workpiece: 600 mm > 760 mm with use of the universal spindle - Adjustable infeeds: max. 10 mm - Spindle speed: 6000 rpm PLANKER COMPOSITION: - Robust frame Welded machine shop - Secure, soundproof, and fully panoramic enclosure on gas struts with interior lighting - Digital counters (Siko type) for precise manual adjustments of each operation - Raised control panel and operator face - Cast steel infeed table (LxW): 2980 x 255 mm Table height from ground: 900 mm - Side infeed spring-loaded pusher - Digital pass-taking indicators 1) Planer spindle 7.5 kW Tool holders Ø125 x L.230 mm 2 & 3) Right & left vertical spindle 12 kW Tool holders Ø125 x L.130 mm 4) Upper horizontal spindle with independent adjustment 11 kW Tool holders Ø125 x L.230 mm Dkjdpsv Tzw Eefx Ah Ujw - Adjustable pressure shoe at the output 5) 360° universal spindle 11 kW Spindle Ø 50 x L. 240 mm - Vertical idler wheel presser DRIVE: - Feed with variable speed drive: 6 to 24 m/min Drive motor: 3 kW - Helical steel infeed roller in the table Cardan shaft drive - 7 pneumatic pressure rollers 2 notched steel rollers 3 (1 retractable) + 2 rubber-coated rollers - One smooth steel roller in the table at the planer outlet OTHER FEATURES: - Main power supply: 400V. Three-phase + T 50 Hz - Installed power: 53 kW (72 hp) IN 95.6 A - Automatic star-delta starting - Motors with brakes - Toothed belt drive - Electrical thickness adjustment by raising and lowering the beam. 0.37 kW motor - Shaft diameter: Ø50 mm - Minimum working air pressure: 6 bar - Suction: 5 x Ø 120 mm Recommended flow rate: 6100 m3/h Speed: 20 to 28 m/sec depending on the humidity of the wood being machined - CE marking - Padlockable contactor, mushroom stops Dimensions in operating order (W x H): 3000 x 2250 mm Dimensions: 5100 x 2000 x H 1810 mm Weight: 4300 kg Machine supplied with mounted sharpening irons, manual, spare parts list, and diagrams. Please contact us for consumables, accessories, and/or vacuum systems. Upon request, the machine will be serviced and brought into compliance, with inspection and dynamic functional testing. With a 3-month warranty and certificate of compliance. Ex-stock price excluding VAT. Delivery and additional services upon request.

Condition: ready for operation (used), Guilliet KXR with mobile spindle for variable widths Number of spindles: 4, 40 mm diameter Maximum tool diameter for profiling (left/right): 180 mm Vertical shaft adjustment: 40 mm Finished width: 220 mm Finished height: 120 mm Surface table length: 2100 mm Feed speed: continuously variable 4.5-27 m/min. Total power requirement kW Dkedpfx Ahsvq Rnho Uew Approx. dimensions (length/width/height) 3160 x 1420 x 1440 mm Machine weight approx. 1700 kg Power supply: 58 amps Ex works, as is Optional inspection and reconditioning for a fee

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Dkjdjwk Rlxjpfx Ah Uow Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: used, Rotary Table WMW Type D 315 k Serial No.: 10930 Table diameter: 315 mm Table height: 135 mm Transmission ratio: 90 : 1 - Hand crank with index plate and lever - Scale ring for reading at the hand crank - Readable degree scale on the rotary table - Swivelling worm for direct indexing Dsdoxf Uytjpfx Ah Uekw - Clamping via clamping lever - 14 mm T-slots in the table plate - Built-in index plate 23-28-33-42-51-61 Weight: 85 kg

Condition: ready for operation (used), total height: 890 mm, total width: 900 mm, total length: 1,150 mm, spindle diameter: 35 mm, table length: 1,110 mm, table width: 245 mm, type of input current: three-phase, rotational speed (min.): 3,200 rpm, rotational speed (max.): 10,000 rpm, Good morning, We offer for sale a spindle moulder with bottom spindle, manufactured by GRIGGIO, model T2000. Here are a few useful details about the machine: Dedporfaxxsfx Ah Uokw * Spindle diameter: 35 mm (option to change to 30 mm for an additional 1,500 PLN) * Motor power: 4 kW * Star-delta motor starter * Left/right spindle rotation * 5 spindle speeds adjustable by belt: 3/4.4/6/7/10 thousand rpm * Manual up/down adjustment * Foot brake and foot spindle lock * Longitudinal sliding table, e.g. for tenoning, dimensions: 24.5 x 111 cm * Original paintwork * Overall dimensions: 115 x 90 x 89 cm (L x W x H) This machine has been in regular use in a joinery workshop and shows acceptable signs of use, but it has undergone a comprehensive and rigorous inspection at our facility to eliminate any potential faults. This guarantees that the machine is fully operational, requires absolutely no further investment, and is ready for immediate use in your workshop.

Condition: excellent (used), Year of construction: 2015, Complete Cheese Production Line – High-Quality, Semi-Hard Cheese This fully integrated production line, including controls and electrical systems, was engineered and designed by Asepto Germany and constructed by ASTA Eisman Germany in collaboration with Schwarte. The line features Siemens S7 controls and color touchscreen HMI operation panels for precise and user-friendly operation. Installed in a factory that was not yet fully operational, the line has seen minimal use from 2015 to 2023, primarily for demonstrations, ensuring excellent condition and longevity. • Year of Manufacture: 2015 Dkjdpfx Aoxnyr Hjh Uew • Cheese Weight: 4–5 kg and 10–12 kg • Cheese Types: Semi-hard varieties, including Gouda, Edam, and similar This production line offers a ready-to-use, reliable solution for high-quality cheese manufacturing with minimal additional setup required.

Condition: good (used), Motor-driven NC rotary table Stepless rotary table (pitch 0.001°) Dedpfjfr Ih Dsx Ah Ujkw Manufacturer: Rückle Type: PKT 1000 Clamping surface: 1400 mm x 1400 mm Clamping grooves: 7 pieces Slot dimension: 22 H7 mm Slot distance: 160 mm Condition: Very good (used) Optionally with machine bed About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a free specialist for SHW machine tools. Our main focus lies in the field of tool milling machines. Our services include the supply of spare parts, on-site customer service, machine overhauls and control modernization. Services: - Used machines - spare parts - after-sales service - machine service - machine overhauls - control modernization

Condition: used, machine/vehicle number: 6742, Graduation in degrees ,minutes and seconds Diameter 400 mm Dimensions :L. 500 x W.650 x H.160 mm Weight 70 kg Dkedpfx Ahobzfqds Uow

Condition: excellent (used), Year of construction: 2013, Plasma cutting machine manufactured by Cloos for processing sheet material and pipes. Program operating hours: 1,687 hours, very low operating hours. Large-format plasma cutting system. Cutting system: Cloos Quirox Plasma source: Hypertherm Program operating hours: 1,687 hours, very low operating hours. Performance data: Cutting capacity (non-alloyed steel): - Burr-free cutting: 32 mm - Piercing (production): 38 mm - Maximum cutting capacity: 64 mm Cutting capacity (alloyed steel): - Piercing (production): 32 mm Dodpfsxn Ihpox Ah Ujkw - Maximum cutting capacity: 50 mm Cutting capacity (aluminium): - Piercing (production): 25 mm - Maximum cutting capacity: 50 mm Including complete extraction unit With guard and enclosure

Condition: used, Electro circular magnet, crane magnet, load magnet, lifting magnet STEINERT type LR 250-N-2 Serial no.: 421850 Magnet diameter: 250 mm Current consumption: 0.662 amperes Power supply: 200 Volts DC = direct current Djdpfjxf Uygex Ah Uekw - For crane operation Net weight: 32 kg

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: LMC-623C, working width: 230 mm, planing height: 150 mm, spindle diameter: 40 mm, planing width: 230 mm, working height: 150 mm, total width: 1,600 mm, total height: 1,800 mm, total length: 3,500 mm, overall weight: 4,500 kg, power of feed motor: 7,500 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, extraction nozzle diameter: 125 mm, rotational speed (max.): 6,000 rpm, rotational speed (min.): 6,000 rpm, height adjustment type: electric, workpiece height (max.): 150 mm, compressed air connection: 6 bar, type of input current: three-phase, workpiece width (max.): 230 mm, input voltage: 415 V, tool diameter: 200 mm, table length: 2,000 mm, warranty duration: 12 months, shaft diameter: 40 mm, number of spindles: 6, extraction connection diameter: 125 mm, power: 74.5 kW (101.29 HP), input frequency: 50 Hz, product height (min.): 10 mm, product width (min.): 15 mm, Equipment: motor brake, The Leadermac LMC-623C Compact is a heavy-duty 6 spindle planer moulder (4-sided moulder) built for precision and high-volume production. It offers a working range from 15 mm to 230 mm in width and 10 mm to 150 mm in height, making it versatile for a wide variety of timber sizes. This machine is equipped with powerful Siemens IE3 motors, centralised lubrication, and pneumatic side pressures to ensure smooth operation, fast setup, and long service life. The 2000 mm infeed table with fence provides stable feeding, while hardened chrome bed plates and safety interlocks guarantee durability and operator protection. Highlights: 6 precision spindles, 40 mm, 6000 rpm Motor powers up to 20 hp per head (total installed 74.5 kW) Variable feed speeds 6–24 m/min (option to 30 m/min) Pneumatic chip breakers & pressure pads with digital readouts Dkodpfx Ahexlfd Ns Usw CE certified, dust extraction Ø125 mm A compact footprint with industrial-level performance — ideal for joinery workshops, moulding production, and manufacturers needing a reliable 4-sider.

Condition: excellent (used), Weibert F10 Spindle Moulder – 5.5 kW – As New with Power Feeder & Overhead Control Panel Dodpfoxpg T Hox Ah Uekw For sale is a tilting Weibert F10 spindle moulder in nearly new condition. The machine has only been used for a few hours and is ready for immediate operation. Technical details & features: Model: Weibert F10 + Continuous output: 5.0 kW + Short-term/intermittent output: 7.5 kW + Speed: approx. 2,840 rpm + Tilting function + Stepless speed adjustment (e.g., 3,000–10,000 rpm) + Milling spindle: Ø 30 mm (interchangeable), height adjustable + Spindle travel: approx. 140 mm + Table size: approx. 1,200 × 800 mm (solid, precisely ground) + Overhead control panel – ergonomic control at eye level + 4-roller power feeder with new feed rollers (+€500) + Spindle with forward/reverse operation + Table extension and fence with fine adjustment Condition: + Operation time only a few hours + Exceptionally well-maintained, both technically and visually Price: Negotiable €2,500 + €500 for power feeder Location: Haldensleben

Condition: used, Type: Alliance Dksdjxndanspfx Ah Ujw -Serial number: FV0202C048 -Dough pieces from 400 to 1200 g -Year of manufacture: 2002 -Mechanical controls -Motor current: 2.3 A -Number of phases: 3 (three-phase) -Frequency: 50 Hz -Supply voltage: 380 V -Motor power: 0.55 kW

Condition: used, optical rotary table Dkodpfxsdtr I Ss Ah Ujw Diameter 450 mm Height 160 mm Documents available

Condition: used, Year of construction: 1995, SIDEL SBO10- blowing machine SBO10 is intended to manufacture PET bottles. Its production rate can be up to 10.000 bottles per hourdepending on the capacity. As first step, the operator puts the preform bin, via trans pallet or forklift, in the hoisting and tipping unit (SAMETO brand) and the preforms inserts in the hopper. Djdjxlm Nyepfx Ah Ujkw After that, the elevator transfers the preforms to the horizontal elevator, the unscrambler and the final gravity guide (infeed rails).The below schematic diagram describes the general process of SBO10 machine: which consists of: 1. Preform infeed rails 2. Preform infeed wheel 3. Infrared oven 4. Preform transfer wheel 5. Blow wheel 6. Bottle transfer wheel 7. Bottle evacuation GENERAL Presentation 1. Infeed of cold preforms Cold preforms are inserted by an inclined ramp. They are hung by the neck and are guided by two rails between which they are lowered by gravity. 2. Preform heating linear oven The preforms, grasped in the spindles at the neck, are turned 180 degrees so that they are head down and are made to rotate as they pass in front of infrared lamps. The linear oven has 10 heating modules. Each oven module has 8 infrared lamps. Ath oven exit, an infrared camera reads the preform temperature so as the automatic regulation of all the areas coming under its control. 3. Hot preform transfer wheel A transfer wheel with 6 arms conveys the hot preforms through the blowing moulds when they leave the oven. 4. Preform ejection An ejection system is mounted after the preform transfer wheel, in case of a non correct temperature of a preform. 5. Blow wheel Preforms are put in the mould for which opening and closing are assured by a system of connecting rods operated by a cam. The mould is locked by a mechanical device. Blow nozzle guides the stretching rod, which ensures longitudinal orientation. A set of cameras synchronizes the whole process. The moulds are controlled for temperature by chilled water circulation. 6. Bottle transfer wheel A transfer wheel with 6 arms picks up the bottles in the moulds to evacuate them from the blowing wheel. 7. Bottle ejection An ejection system is mounted after the bottle transfer wheel. It is completed by a set of photocells. If the bottle is not correct, it is ejected. 8. Bottle outfeed wheel. An outfeed wheel with 8 notches receives the bottles comes from the transfer arms and puts them down on a belt. They are held by guides. The bottle outfeed can be linked to a conveyor system. - Hoisting and tipping unit (1996) - Hopper (1995) - Elevator (1995) - Orienting rollers (1995) - Unscrambler (1995) - Gravity rails (1995) - linear oven (1995) - Blow wheel with 10 moulds (1995) - Bottle outfeed wheel (1995) - Operator control panel (1995) - Electrical cabinets (1995) 12. Chiller (1998) Energy and fluid consumption 1. Electricity Max supplied power: 216kW Average consumption: 120 to 160 kW/h according to item Voltage: 380 (3phase) Frequency: 50/60 Hz 2. Compressed air Supplied power: from 7 to 35 bar Control air pressure: 7 bar flow: 60 to 125 Nm3/h according to item Air quality: dry air, deoiled and filtered to 0,1 ppm Spherical base pressure: up to 25bar flow: 170 to 830 Nm3/h Free standing base pressure: up to 35 bars flow: 235 to 1.100 Nm3/h 3. Chilled water temperature: 10 to 12 celsium degrees pressure: 5 to 6 bars flow: up to 9 m3/h calories to be removed: up to 22.000 Kcal/hour Max supplied power: 216kW Voltage: 380 (3phas...

Condition: reconditioned (used), Model: MAGIC PSL 630 Type: Thicknessing Planer (Dickenhobelmaschine) Technical Specifications: Max. planing width: 630 mm Max. planing height: 245 mm Max. depth of cut: 10 mm Cutter block speed: 5000 r.p.m. Diameter of cutter block: 120 mm Feeding speeds: 6 to 18 m/min Spindle motor: 7.5 HP Overall dimensions: 1300 x 980 x 1080 mm Net weight: 980 Kg Dkedpfsw Eb Nwsx Ah Uow

Condition: ready for operation (used), Well-maintained panel saw in top condition Combination unit: table milling machine & circular saw Type: KFS 20 Year of manufacture: 2000 Sliding table length: 200 cm Cutting width to the right of saw blade: 100 cm Saw blade tiltable up to 45 degrees Milling spindle 30 mm Rip fence extendable up to 250 cm Technically inspected Immediately available Shipping possible Dkedpfx Ajxn Sbysh Ujw

Condition: used, Year of construction: 2010, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm feed 5-25 m/min Dkjdpowmggkjfx Ah Ujw Dimensions (L/W/H) 4700/1800/1100 mm weight ca. 4.000 kg CASOLIN MEGA 230/6 four-side planer ----- 6 spindles, with touchscreen control. Width and height controlled. Spindle arrangement: 1st spindle: bottom, 40 mm diameter, 6,000 rpm, 5.5 kW 2nd spindle: right, 40 mm diameter, 6,000 rpm, 11 kW together with 3rd spindle: left, 40 mm diameter, 6,000 rpm 4th spindle: top, 40 mm diameter, 6,000 rpm, 7.5 kW 5th spindle: bottom, 40 mm diameter, 8,000 rpm, 5.5 kW 6th spindle: top, 40 mm diameter, 8,000 rpm, 5.5 kW Machine without machining tools. The additional screen on the front of the machine is not included in the scope of delivery (is part of the window system). Machine already dismantled and stored. (technical information according to the manufacturer - no guarantee!)

Condition: good (used), Round roller 1000 x 1 mm width 1055 mm roller diameter 50 mm Space requirement : Width 1200 mm height 1230 mm depth 600 mm Weight 110 kg Dkedoud Sphopfx Ah Ujw

Condition: used, Number of spindles 5 St. Working width 20 - 230 mm Working height 8 - 120 mm Length of the planing table 2000 mm Feed motor 1,1 kW Feed speed stufenlos regelbar 2 - 12 m/min. 1 WEINIG VARIOMAT planer and moulder including multifunction / slotting table ----- Machine will be cleaned and functionally tested before delivery ! Technical manufacturer's description: ----- Working width: 20 - 230 mm Working height: 8 - 120 mm 1st spindle horizontal, bottom ----- Motor with brake: 5.5 kW Diameter 40 mm Speed ??6000 rpm Tool radius 125 - 145 mm Axis adjustment range 5 mm Folding device including rebate cutter MarathonCoating for table insert before and after the 1st lower spindle 2nd spindle vertical, right ----- Motor with brake: 11 kW Common motor with left vertical spindle Diameter 40 mm mm Speed ??electronically adjustable 3000 - 6000 rpm (for 11 kW/15 HP) Tool cutting radius for longitudinal machining 93-232 mm Minimum tool diameter at stop plane: 93 mm Maximum tool diameter behind stop plane: 180 mm Maximum throat depth 45 mm Axially adjustable travel 30 mm Insertion segment, including additional stop lip 125 mm Insertion segment, including additional stop lip 150 mm 3rd vertical spindle, left POWERLOCK/HSK ----- Shared motor with 1st right spindle PowerLock tool holder Shared speed with right vertical spindle Tool cutting radius for longitudinal machining 93-232 mm Maximum throat depth 45 mm Minimum throat depth with tool cutting radius 200 mm: 20 mm Axially adjustable travel under table 30 mm Insertion segment 125 mm Insertion segment 150 mm 4th spindle, horizontal, top ----- Motor with brake: 5.5 kW Diameter 40 mm Speed ??6000 rpm Tool cutting radius 125-200 mm Maximum chamfering depth 30 mm Minimum chamfering depth with a tool cutting radius of 200 mm: 20 mm Axially adjustable range 30 mm Glazing bead removal after the upper spindle 5th spindle, second, horizontal, bottom ----- Motor with brake: 4 kW Diameter 40 mm Speed ??6000 rpm Tool cutting radius 125-200 mm Maximum chamfering depth 15 mm Dedpfxowugpbj Ah Uekw Axially adjustable range 10 mm Machine operation ----- Both axes of all spindles - with the exception of the first lower spindle - are equipped with mechanical digital displays. Central radial adjustment with mechanical digital display of the feed rate along with the pressure in front of the upper spindle. The pressure after the upper spindle can be adjusted separately. Memory function ----- For saving the setting values ??of profiles Tool holder axes and pressure elements before and after the upper tool holder with electronic dual displays: Function: -Saving the setting values ??of the finished profile at the touch of a button under a profile number - When the profile number is selected again, the electronic dual displays show the setting values - By manually adjusting the tool holders and pressure elements, the displays are aligned - 99 memory locations 3 axial CNC-controlled adjustment and positioning of the spindles in conjunction with the memory function. For spindles 2, 3, an...

Condition: excellent (used), Dividing table – rotary table Brand: PDQ Diameter: 635 mm Height: 145 mm Base diameter: 760 mm Indexing: 45° via index Dkedpexazu Hefx Ah Ujw or 1° and minutes via scale Weight: 280 kg

Condition: used, Year of construction: 2014, Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 600 Compact ----- The machine will be cleaned and completely checked before delivery. Brief Summary: ----- - 5 spindles - Powerful motors - Left and upper spindles controlled for width and height Detailed Description: ----- Technical Specifications: Working width: 20-230 mm Working height: 10-120 mm Number of spindles: 5 1st spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool travel radius: 125-145 mm Tool travel radius for rebate cutter: 130-160 mm Axis adjustment range: 5 mm Rebate device MarathonCoatin for table insert in front of the 1st lower tool holder Electronic digital display for wheel adjustment 2nd spindle - Right ----- Motor with brake: 11.0 kW Shared motor with left-hand tool holder Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting radius 40 mm below table level: 93 - 200 mm Tool cutting radius 55 mm below table level: 93 - 180 mm Djdpswzmu Refx Ah Uskw Tool cutting radius for straight cutter heads max. 163 mm Max. tool diameter behind stop level: 180 mm Max. throat depth: 35 mm Axis adjustment range: 55 mm 3rd spindle - left ----- Motor with brake: Shared motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting radius 40 mm below table level: 93 - 200 mm Tool cutting radius 55 mm below table level: 93 - 180 mm Tool cutting circle for straight cutter heads max. 163 mm Max. throat depth: 35 mm Axial adjustment range: 55 mm Radial CNC-controlled spindle 4th spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting circle: 93 - 200 mm Tool cutting circle for straight cutter heads max.: 180 mm Max. throat depth: 35 mm Axial adjustment range: 40 mm Radial CNC-controlled spindle Split pressure shoe in front of the upper tool holder, adjustable to the tool cutting circle and pivoting away from the tool, spring-loaded. Pressure shoe before and discharge after the upper spindle with electronic digital displays, integrated into the memory function. 5th spindle - lower ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting radius: 93 - 200 mm Max. groove depth: 15 mm Axis adjustment range: 35 mm Feed system ----- Electronic feed, continuously adjustable with brake: 4 kW, 5 - 30 m/min Feed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth gauge and self-cleaning. Adjustment range of the feed rollers relative to the left tool holder, axial: 35 mm Machine electrical system ----- Operating voltage 400 V (voltage range 380 - 420 V), 50 Hz. All spindles are IE 2 version. Electrical design according to DIN VDE 0113, electrical equipment for industrial machines EN60204, IEC-204-1. Other electrical regulations are not taken into account. Machine stands, tables, and stops -----...

Condition: good (used), Sheet metal round roller Round roller 1000 x 1.5 mm Dkjdjud Spnepfx Ah Uew width 1040 mm roll diameter 55 mm asymmetrical roller arrangement width 1500 mm depth 930 mm height 1280 mm Weight 200 kg without pallet