Used Construction Circular Saw for sale (24,057)

Condition: good (used), construction circular saw, circular saw Dodpfx Aed R N Inefnokh -Engine power: 2.6 KW -Voltage: 220 volts -Dimensions: 885/670/H810 mm -Weight: 42 kg

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw year of construction 2002 Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine are also available. Dkjdpfx Aodzp T Dsfneh

Condition: new, Table size: 420 x 450 mm Table height: 215 mm Table swivels up to: 45 Dkjdpec Snvfsfx Afnjh Saw or cutting blade Ø: 200 mm here cutting depth: 47 mm electrical connection: alternating current 230 V weight: 14,5 kg

Condition: ready for operation (used), Capaciteit slang: max. 2 inch / 50 mm De slang wordt via een rupsbandsysteem in de machine gevoerd en aangestuurd door een elektromotor De invoersnelheid is instelbaar van 0 tot 40 m/min De afstand tussen de banden op het rupsbandensysteem wordt handmatig ingesteld met een handwiel dat is uitgerust met een digitale teller Capaciteit: 500 programma's Eén programma omvat: de onderdeellengte, het aantal onderdelen, de verlengingsregelaar, de loopsnelheid van de slang, de naam van de slang, het programmanummer en de diameter van de slang De slang wordt gesneden met een speciale gekartelde schijf: 520x4x40mm 9 kW spindelmotor met rem Dkodjygywhjpfx Afneh Rotatiesnelheid: 3000 tpm Tijdens het snijden houden twee scharnierende kaken, handmatig verstelbaar door een wiel, de slang vast en geleiden deze Het buigen van de slang en het voortbewegen van de snijkop worden uitgevoerd door twee pneumatische cilinders Luchttoevoer: 6 bar Afmetingen H x B x L: 1300 x 1300 x 1350 mm Gewicht: 580 kg

Condition: ready for operation (used), empty load weight: 900 kg, semi-automatic with hydraulic clamping same as Kaltenbach type KKS Dia saw / abrasive - disk: 425 mm Max dia workpiece at 90°: dia 140 mm Max dia workpiece at 45°: dia 140 mm Max dimensions workpiece at 90°: 300 x 60 mm / 140 x 140 mm Djdpfx Afeygyx Sonokh Turningspeeds: 13 + 26 m/min Power needed / motorpower: 2,9 kW Angle-input system (mitre)(number+°): R : 60° - L : 90°

Condition: used, Cutting width: approx. 700 mm Cutting length: approx. 5,200 mm Longitudinal circular saw Jrion type HMS for precise rip cuts in solid wood, panel material, and wood-based composites. Dedex D U Saspfx Afnskh Availability upon agreement from February 2026.

Condition: good (used), Year of construction: 1999, saw blade diameter 450 mm cutting diameter 150 mm saw blade diameter möglich: 400 + 370 mm Saw blade 50 mm saw blade feed stepless ca. 0 - 1000 mm/min rapid return speed 3300 mm/min table rotating + / - 90 Grad cutting speed 7 - 43 m/min Dedpfexqrdmox Afnjkh total power requirement 4 kW weight of the machine ca. 1050 kg Overall size 1020 x 1350 x 2000 mm Semi-automatic cold circular saw, made by Kaltenbach, type KKS450H, with Siemens S7 PLC control for cutting speed and sawing height, feed roller conveyor, discharge roller conveyors with hand crank, remote control and digital display. Machine dealer with own stock of 1600 m².

Condition: excellent (used), Year of construction: 2002, operating hours: 1,870 h, Tilting panel saw T 73 by Martin, equipped with 3-axis scorer and 3m sliding table Dksdpfxjxtvcxe Afnsh Sliding table length: 3000 mm Saw blade tilting range: 0 to 46 degrees Speeds: 2800, 4000, and 5500 rpm with electronic speed display Drive motor: 5.5 kW with automatic motor brake Saw blade diameter up to 500 mm Maximum cutting height: 170 mm Cutting width up to 1100 mm, adjustable from the front via handwheel and manually movable Tilting angle and height electrically adjustable Crosscut fence with 2-point stop up to approx. 3350 mm Parallelogram cross table with digital angle display and roller Folding rip fence Extraction ports: 120 + 100 mm Sliding table can be locked in any position Handle Edging shoe 1 set of plastic saw blades with matching 3-axis scorer, freshly sharpened 3 riving knives 3-axis scorer unit, fully electrically adjustable while the machine is running 2 blade guards Miter fence for acute angles Tool compartment Emergency stop switch Operating manual CE marking The machine shows minor signs of use on the anodized sliding table. Small cuts on the sliding table have been repaired. Original paintwork, only touched up in a few places. Excellent condition as seen in the original photos. Dimensions approx. 3300 x 3750 x 1600 mm (LxWxH). Weight approx. 1950 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller."

Condition: used, Year of construction: 2015, saw blade diameter 350 mm Cutting capacity 90° (rectangle) 100 x 90 mm Cutting capacity 90° (square) 90 x 90 mm Cutting capacity 90° (round) Ø 95 mm Cutting capacity 45° (rectangle) 75 x 80 mm Cutting capacity 45° (square) 75 x 75 mm Cutting capacity 45° (round) Ø 90 mm spindle turning speed range 38/19 U/min power capacity 1,5 / 0,75 kW In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Dksdeygx Dyepfx Afnoh Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2001, Technical details: Dodpswvbk Asfx Afnokh saw blade diameter: 250/285 mm cutting diameter: 50-70 mm total power requirement: 5,5 kW weight of the machine ca.: 1 t Saw type: circular saws Cutting direction: straight cut Automation: automatic Material type: structural steels, stainless steels, tool steels Material width: 60 mm Material height: 70 mm *

Condition: used, Width: approx. 140 cm Height: approx. 160 cm Length: approx. 320 cm Motors: 2 Technical details: on request Table: Tiltable Dksdpfexwbpfjx Afnoh The robust combined woodworking machine Bäuerle type KFL unites a panel saw, slot mortiser, and spindle moulder with power feed in one machine and comes with a comprehensive range of accessories.

Condition: used, Mitre angle: 45° – 90° Cutting length: approx. 2,200 mm Further data: See PDF Workpiece: max. 50x70 mm Dkjdpfow D Dfxex Afneh Double mitre circular saw Striffler type 2750-E for precise mitre and cross cuts in wooden profiles, mouldings, and frames. The machine is ideally suited for series production in window, door, and furniture manufacturing thanks to two pneumatically swivelling saw units and electronic positioning.

Condition: used, Motor: 3 kW Triple combination table saw, slot mortiser, and milling machine Kirchner Leipzig. Dkodowzbcvspfx Afnsh Without milling arbor.

Condition: used, Saw blade ø: max. approx. 300 mm 1200064 Trennjäger sharpening machine for grinding small circular saw blades. Dsdpfx Aeulfftjfnokh

Condition: used, Cutting length: approx. 5,300 mm Dksdpfx Afjxvcacenoh Longitudinal circular saw Irion type HFS-170/15-SA for precise longitudinal cuts in solid wood, panel materials, and wood composites.

Condition: used, Kölle Formatic Panel Saw - Year of manufacture: 1997 - 5.5 kW motor - 400 Volt - Weight: 1050 kg - Overhead control panel - 4 speeds - Electric lifting, lowering & tilting - Digital display for fence - Cutting width 1 m right of the blade - Brake motor Dedpjx Ha Rvofx Afnjkh - 2800 mm - Cutting height 145 mm without scorer

Condition: excellent (used), Catalogue number 7887 Dksdpfx Aeyg Il Tefnjh TECHNICAL DATA - Max. saw blade diameter: 350mm - Saw blade bore diameter: 30mm - Max. cutting height: 100mm - Main blade adjustable up/down and at an angle - Saw blade guard - With side trolley - Cutting length on trolley: 920mm - Cutting width with fence: 600mm - Main motor: 4kW - Table dimensions: 102x900mm - Mitre gauge - Extraction port diameter: 110mm - Dimensions (LxWxH): 2110x1370x1000mm - Weight: 550kg ADVANTAGES – Made in Poland – With side trolley – Mitre gauge – Used saw, very good condition Net price: 7,900 PLN Net price: 1,880 EUR (exchange rate 4.2 EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: excellent (used), Catalogue number: 7884 TECHNICAL DATA - Max blade diameter: 350 mm - Blade bore diameter: 30 mm - Max cutting height: 80 mm - Main saw blade adjustable up/down and at an angle - Blade guard included - With side sliding carriage - Angle fence - Cutting length on carriage: 780 mm - Cutting width at guide: 1320 mm - Main motor: 4 kW - Two spindle speeds: 3000, 4000 rpm - Table dimensions: 1120x1020 mm - Table extension – 3 metal rollers - Extraction port diameter: 65 mm, 110 mm - Dimensions (L/W/H): 2210x2980x1100 mm - Weight: 615 kg ADVANTAGES Djdpjyg Ig Dofx Afnekh - Manufactured in Poland - With side sliding carriage - Used saw, in very good condition Net price: 8,900 PLN Net price: 2,120 EUR depending on the rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), For sale is a used Panhans V91 Twin II panel saw with a cutting length of 3200 mm. The machine is in very good condition and has been inspected by our qualified personnel. Technical specifications: - Double tilting saw unit Djdjwza N Uepfx Afnskh - Cutting length: 3200 mm - Cutting width: 1250 mm - Cutting height: 173 mm - Max. saw blade diameter: 500 mm - Overhead control panel - Angle scale with length compensation - Motor power: 7.5 kW - Year of manufacture: 2012 The panel saw is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Info Tel. 06244-20299 Related terms: saw, circular saw, panel saw, format Reference: R-S24F9

Year of construction: 2011, condition: used, Technical details: saw blade diameter: Ø 400 - 500 mm hole of sawblade: Ø 50 mm saw blade rpm: 6 - 70 / steples U/min Dsdpfx Aou Niuhsfnekh cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: flat: 400 x 30 / 345 x 70 / 300 x 95 mm Table dimensions: LxB: 620 x 670 mm height over floor: 1000 mm total power requirement: 8 kW weight of the machine approx.: 1170 kg The machine is currently in the technical department. SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Clamping pressure 30 bar Clamping stroke Øxstroke: 100 x 160mm Hydraulic pump Operation via control panel / two-hand operation Coolant system with pump *

Condition: used, Technical details: Saw blade diameter: 400 mm Dksdou Niuzepfx Afnsh cutting diameter: 140 mm hole of sawblade: 50 mm saw blade rpm: 6 / 12 / 24 / 48 U/min cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 130 x 130 mm cutting range 90 degrees: flat: 370 x 30 / 315 x 70 / 265 x 95 mm Table dimensions: Ø 700 mm table rotating: 360 Grad clamping capacity: 8 - 30 bar electrics - voltage/frequency: 400 / 50 V/Hz air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1170 kg dimensions of machine: T: 1,5 x B: 1,0 x H: 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control (underfloor saw) for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre cut 30° to 90° Operation Control panel and two-hand operation Material clamping (opening width) adjustable with return stroke Saw blade feed speed adjustable Without coolant system *

Condition: used, Technical details: Saw blade diameter: 350 mm cutting range 90 degrees: round: 110 mm cutting range 90 degrees: square: 85 x 85 mm cutting range 90 degrees: flat: 180 x 85 mm cutting range 45 degrees: round: links/rechts: 105 / 110 mm cutting range 45 degrees: square: links/rechts: 85 x 85 / 85x85 mm cutting range 45 degrees: flat: links/rechts: 130x85 / 130x85 mm hole of sawblade: 40 mm range of revolutions per minute - continous: 9 / 18 / 36 / 74 / 4step U/min rotary table: Ø 400 mm/min Dedpfx Aou Nilyefnekh table swivelabel +/-: 60° rechts und 45° links ° air-pressure connection: 7 bar total power requirement: ca. 2,2 kW weight of the machine approx.: 430 kg dimensions of machine: B: 0,7 x T: 1,01 x H: 2,1 m The circular saw is an electro-hydro-pneumatic semi-automatic circular saw with which miter cuts of up to 45° inwards or 60° to the right can be made on profiles and solid materials. Vertival circular saw Solid, heavy cast construction max. opening of the vice 180mm cutting counter vertical travel of the saw head: 200mm Vice opening width max. 180mm (jaw size W:220 x H:70mm) Operation via control panel *

Condition: good (used), Year of construction: 1998, Semi-automatic circular sawing machine Make KASTO Type:V350 U Year 1998 Dkodpfxsfym Ewj Afnsh with mitre cut, roller conveyor and stop Saw blade dm.350mm Pneumatic vice and saw feed Stepless. Machine little used in good condition.

Year of construction: 1980, condition: used, Circular saw with miter cut Make KALTENBACH Type:KKS 400 M Year.ca.1980 Hydr.feed infinitely variable. Saw blade: 400mm Dkjdpfx Aeixumvjfneh

Condition: excellent (used), Year of construction: 2002, ALU-profile mitre saw Fabr.Dry Tech Type:355 MLS Year 2002. Saw blade dm.355 mm Cutting range round max.120 mm Square max 120 mm X 120 mm Dkodstwn E Ujpfx Afneh