Used Construction Machine for sale (88,204)

Condition: used, functionality: fully functional, power: 210 kW (285.52 HP), fuel type: diesel, color: yellow, tire size: 710x26,5, tire condition: 40 %, Year of construction: 2016, operating hours: 16,600 h, machine/vehicle number: A080191, Equipment: additional headlights, air conditioning, cabin, lighting, Ponsse Buffalo 8W forwarder Gtedpfx Agswd E Tks Tjt K100 crane, Grippen 035 grapple Central lubrication system LED lighting 2 previous owners

Condition: new, power: 1.2 kW (1.63 HP), color: blue, overall weight: 294 kg, maximum load weight: 500 kg, load capacity: 500 kg, Zallys Jack 1200W 1/22 electric tractor is the ideal solution to avoid manual handling of loads and speed up the movement. - for loads up to 500 kg - for towing up to 1500 kg - versatile and compact - with pneumatic wheels for indoor and outdoor use - optional button for 2-speed adjustment - wide range of standard accessories or customizable on request Max. Forward driving speed (standard version) 10 km/h Max. Driving speed forward (with upgrade)12 km/h Max. driving speed Max. driving speed reverse (standard version) 8 km/h Max. driving speed Max. driving speed reverse (with upgrade) 10 km/h Load capacity in level 500 kg Max. Pulling capacity in level (standard version) 500 kg Max. Max. traction capacity in level (with upgrade) 1.500 kg Max. gradient with load *15 Max. tractive force on hook (standard version) 500 N Max. tractive force on hook (with upgrade) 1500 N Braking distance at deceleration (without load) 6 m * Load capacity depends on slope, type of ground and operating time If the force on the hook in N remains the same, the following circumstances can change the tractive force of the machine (specified in kg): the nature of the ground, the use of ballast, and the type of wheels with which the machine and truck are equipped. Batteries 2 Battery type - AGM traction battery 12 V Nominal capacity 5 h - 105 Ah nominal capacity 20 h - 130 Ah Battery weight 33 kg Godpfx Ask Dzzksg Tstt Gearbox mechanical Gearbox 1:25 rear drive electronic service brake electro-mechanical parking brake weight without battery 143 kg empty weight incl. 105/130A AGM batteries 209 kg empty weight incl. 200/240A AGM batteries 267 kg Length 2.000 mm Width 814 mm height handlebar / drawbar 1175 mm seat height / saddle height 860 mm loading area height 510 mm wheelbase 1418 mm turning circle 3200 mm

Condition: new, Year of construction: 2025, New MW2000 / NX-5 model with 360° hydraulic rotator. Self-propelled pile driver for PV farm posts by Mazaka, 9.15 m mast, DEUTZ 85 kW engine! MAZAKA MW2000 / NX-5 • Engine – DEUTZ, Stage V emissions standard • Engine power: 85 kW • Noise level: 109 dBA • Steel tracks HAMMER • Model: MZK65, 1650 Joules • Impact rate: 350-700 blows/min • Oil flow: 70-100 L • Hammer weight: 750 kg HYDRAULIC SYSTEM • Oil tank: 200 L • Oil flow rate: 50-100 L/min • Oil pressure: 225 bar • Fuel tank: 120 L UNDERCARRIAGE SYSTEM • Speed 1: 2 km/h, speed 2: 4.4 km/h Gtedpow Rvlvjfx Ag Tst MAX. POST HEIGHT • Post height: 9,150 mm • Side shift: 100 - 100 mm • Pile cap: 145 x 95 mm included in the machine price (other sizes available at extra cost) TRANSPORT DIMENSIONS • Height: 2,280 mm • Width: 2,280 mm • Length: 3,600 mm • Weight: 7,950 kg • Ground clearance: 500 mm • Mast tilt: +20° / -150° • Side tilt: +15° / -15° 360° ROTATOR • Rotation speed: 0 - 5 rpm • Hydraulic rotator system Net retail price including transport: €215,000.00 Optional equipment (at extra charge): • Automatic levelling system – €4,400 net • Post puller – €2,200.00 net • Rock, concrete, and asphalt auger complete with 203 mm / 6-inch bit and DTH mounting bracket – €18,500 net

Condition: new, Maximum Lifting Capacity: The Krachtarmlift boasts an impressive lifting capacity of 600 kg, allowing heavy loads such as steel beams and lintels to be effortlessly moved and hoisted into position. Ease of Use: Thanks to the simple hand crank operation, loads can be lifted and positioned with minimal effort and with millimeter precision. Safety: Featuring a solid and stable construction, this lift provides maximum safety during operation. Mobility: Fitted with swivel casters, the lift can easily be moved to different locations on the construction site or indoors through door frames. Gtsdpfx Ajw Eu Hijg Tet The Krachtarmlift Lintel Lift MUBA is an indispensable tool on any construction site, designed to significantly simplify the lifting and positioning of heavy loads. Renowned for its robust build and user-friendly operation, this lift offers an efficient solution for handling beams, lintels, and other heavy construction materials. Maximum lifting capacity and range: With a load capacity of 600 kg and a maximum height of 2.75 meters (with an optional adapter, the height can be extended to 3.00 m), the Krachtarmlift can lift heavy objects with ease. This makes it ideal for installing lintels and other structural elements at height. Easy to operate: The lift features a smooth and effortless hand crank mechanism, allowing loads to be positioned precisely without excessive physical exertion. The crank is ergonomically designed, ensuring lasting comfort during prolonged use. Safety first: Safety was a critical consideration in the design of the Krachtarmlift. Its robust base ensures stability, even at maximum load. Additionally, the wheels are equipped with brakes, keeping the lift securely in place during operation. Mobility and flexibility: Equipped with swivel casters, the Krachtarmlift can be easily moved by a single person. This makes it simple to transport the lift to various locations on the jobsite, contributing to overall efficiency and flexibility of operations.

Condition: ready for operation (used), functionality: fully functional, power: 2.94 kW (4.00 HP), fuel type: gasoline, Marking machine: - Titanium - Promark 690 - Airless pump - Honda GX120 engine, 4hp Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale! Gtsdpfxjtpxg Te Ag Tst

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw year of construction 2002 Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine Gtodpfx Agedzp T De Tot are also available.

Condition: used, functionality: fully functional, Year of construction: 2023, machine/vehicle number: SN061476, 12 months warranty, except for the engine. Gtodpfxsw Ia Rwj Ag Tjt

Condition: like new (used), functionality: fully functional, overall weight: 640 kg, Year of construction: 2021, operating hours: 20 h, Floor sanding machine Orbiter 800 RC-DSP - CONTEC's most powerful grinding machine with orbital drive for stripping, cleaning or surface preparation surface preparation, sanding and polishing Technical specifications Working width: 800 mm Motor: 400 Volt / 32 A / 15 kW Tool speed: 230 - 825 rpm Discs: 3 x 280 mm Gtedour N Dtjpfx Ag Tot Weight: 640 kg Water tank: 20 liters Special features: Integrated feed control with radio remote control On-board computer with grinding recommendation and diamond wear indicator, adjustable grinding pressure, on-board battery board battery" and joystick control for easy transportation. transportation.

Condition: new, functionality: fully functional, Year of construction: 2025, Brand new, self-propelled solar pile driver by Mazaka. The model is designed with a compact chassis – making it ideal for transport and intensive use. Mazaka is a brand recognized by professionals throughout the EU, USA, and Canada. ONE UNIT AVAILABLE IMMEDIATELY FROM STOCK. DISCOUNT POSSIBLE! CONTACT US FOR DETAILS. MAZAKA Self-Propelled Pile Driver MW1200 CW Engine Brand: YANMAR TIER 5, 35.4 kW, Model: 4TNV88C-YDEH2 / EU Stage V Noise level: 108 db Hammer Gtsdpew Rvinofx Ag Tot Model: MZKK65 – 1,450 Joules Blow rate: 350–700 bpm Hammer weight: 750 kg HYDRAULIC SYSTEM Oil tank: 150 L Oil flow: 50–100 L/min Working pressure: 180 bar Fuel tank: 50 L MACHINE SPEED Speed: 2.2 – 4 km/h PANEL HEIGHT Maximum panel height: 6,100 mm Side shift Standard pile head template (other profiles available on request): 125–125 mm / 100–60 mm DIMENSIONS Height: 2,770 mm Width: 2,290 mm Length: 3,660 mm Weight: 4,750 kg Mast tilt: +10° to -63° Side tilt: +10° to -10° FUEL CONSUMPTION Diesel: 2.5–3.5 l/h Retail price including transport Net: €101,000 Optional equipment at extra cost: • Automatic leveling system – €4,100 net • Post puller – €2,000 net • Additional pile head template per buyer’s technical drawing – €1,600 net • Rock, concrete, and asphalt auger with 203 mm bit and DTH 6" mounting kit (drilling depth approx. 1,650 mm in 5–10 min): €16,000 net. Note: Rock drilling requires a 14 bar / 14 m³ compressor (not included). • Auger for soft soil (150 x 1500 mm or 200 x 1500 mm) with rotary head, complete – €4,500 net

Condition: like new (used), functionality: fully functional, For sale is an M18 Milwaukee demonstration set with full warranty. The Power SET consists of: Cordless percussion drill driver M18 FPD3-0X Cordless compact impact wrench 1/2" M18 FIW2F12-0X Gjdpfx Agjwzlwks Tjtt Cordless angle grinder M18 FSAG125X-0X Cordless circular saw M18 FCS552-0 Cordless reciprocating saw M18 FSZ-0 LED cordless hand lamp M18 TLED-0

Condition: good (used), functionality: fully functional, fuel type: diesel, Year of construction: 2016, operating hours: 9 h, Hybrid LED light tower Smart solar battery and diesel power system Brand: Verdegro Type: LLTT-H Year: 2016 Gsdpewhmqrjfx Ag Tett Solar power system (350 W) High efficiency LED flood lights. Photocell daylight sensor (automatic/on/off) Spring-driven cable drum Optional: Geo fencing by DSE web interface 7 section vertical tower (steel galvanized) Forklift sprockets on top + below chassis Information LED backlight controller screen Hybrid diesel generator Fuel tank capacity 140 L Drip tray / spill container Four telescoping outriggers and leveling jacks Torsion rubber suspension axle

Year of construction: 2021, condition: used, 2021 Storax el. ramp (380 V). Load capacity: 10,000 kg Total weight: 3,800 kg Working height: 1,000-1,650 mm Length of inclined plane: 8,650 mm Length of horizontal plane: 3,500 mm Total length: 12,450 mm Total width: 2,360 mm Row width: 2,040 mm Working width: 2,200 mm = Further information = General information Year of manufacture: 2021 Model year: 2021 Color: Red Dimensions Dimensions (L x W): 1,245 x 236 cm Weights Gsdpfx Agov Unflo Tjtt Empty weight: 3,800 kg Payload: 10,000 kg GVW: 13,800 kg Condition General condition: very good Technical condition: very good Visual appearance Condition: very good

Condition: used, Year of construction: 2005, Rebar line with numerical control, used, in good condition. Gtodewny Idjpfx Ag Tet

Condition: like new (used), functionality: fully functional, overall weight: 640 kg, Year of construction: 2021, operating hours: 15 h, Floor sanding machine Orbiter 800 RC-DSP - CONTEC's most powerful grinding machine with Godpfx Ajur N Aisg Tstt orbital drive for stripping, cleaning or surface preparation surface preparation, sanding and polishing Technical specifications Working width: 800 mm Motor: 400 Volt / 32 A / 15 kW Tool speed: 230 - 825 rpm Discs: 3 x 280 mm Weight: 640 kg Water tank: 20 liters Special features: Integrated feed control with radio remote control On-board computer with grinding recommendation and diamond wear indicator, adjustable grinding pressure, on-board battery board battery" and joystick control for easy transportation. transportation.

Condition: excellent (used), functionality: fully functional, empty load weight: 411 kg, digging bucket width: 1,750 mm, Year of construction: 2015, machine/vehicle number: 2015-2222, Cseri, German manufacturer, tiltable ditch cleaning bucket, MS 08 mount, capacity 360 liters. Gtjdpfjw Aguyex Ag Tet

Condition: new, Sand Gravel Fabrication Plant: Essential Solution for Modern Construction Needs In the construction and infrastructure industry, high-quality sand and gravel are critical raw materials for creating concrete, asphalt, and other foundational elements. A Sand Gravel Fabrication Plant is the cornerstone of producing these materials efficiently and at scale. With advanced technology, versatility, and scalability, these plants cater to a wide range of projects, ensuring consistent quality and meeting the growing demand for construction materials. This article explores the general introduction, features, and applications of sand gravel fabrication plants, including both stationary and mobile systems. General Introduction to Sand Gravel Fabrication Plants A sand gravel fabrication plant is a specialized facility designed to process raw materials such as sand, gravel, and aggregates into construction-grade products. These plants combine various equipment, including crushers, screens, conveyors, washers, and storage units, to convert raw materials into ready-to-use aggregates. There are two primary types of sand gravel fabrication plants: Stationary Fabrication Plants: Fixed installations designed for high-capacity production. Ideal for large-scale operations and long-term projects. Mobile Sand Gravel Fabrication Plants: Portable systems that can be transported to different project sites. Perfect for temporary operations and projects in remote locations. Both types are equipped with advanced machinery and automation systems to ensure high efficiency, precision, and sustainability. Applications of Sand Gravel Fabrication Plants Sand gravel fabrication plants are indispensable across multiple industries due to their ability to produce high-quality aggregates. Key applications include: 1. Construction and Infrastructure Produces sand and gravel for concrete, asphalt, and base materials. Supports large-scale infrastructure projects such as highways, bridges, airports, and railways. 2. Residential and Commercial Development Gtodpfjvlwqlsx Ag Tst Supplies aggregates for building foundations, driveways, landscaping, and drainage systems. Plays a vital role in residential housing and commercial property construction. 3. Road Construction Provides high-quality crushed stones and sand for roadbeds, pavements, and highways. Ensures durability and longevity of road surfaces. 4. Mining and Quarrying Efficiently processes mined materials into usable aggregates. Enhances productivity in quarrying operations with optimized material handling systems. 5. Environmental Restoration Supplies aggregates for erosion control, land reclamation, and shoreline protection projects. Facilitates sustainable environmental rehabilitation efforts. 6. Recycling of Construction Waste Mobile sand gravel fabrication plants are ideal for recycling concrete and asphalt. Converts waste materials into usable aggregates, reducing landfill burden and promoting sustainability. Stationary vs. Mobile Sand Gravel Fabrication Plants Stationary Fabrication Plants Best For: Long-term, large-scale projects and industrial operations. Advantages: High-capacity production. Robust and durable structures. Advanced automation for minimal manual intervention.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, We offer 2 used screw pumps. Gjdpfxovdtage Ag Tjtt Company: Montanbüro GmbH. Machine type: S5/7.5 kW. Year of construction 2017. Fully functional.

Condition: used, Year of construction: 2010, Loading silo for asphalt mixes 270 tons with bucket conveyor - separate loading silo for various asphalt mixes - capacity: 270 tons - with bucket conveyor and bucket - can be attached to any existing system Godpfx Agjv H R Tps Tstt - control system

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: W 115375, We are selling a Conturex 2 C 124 for milling, drilling and profiling work - special window construction machine. Previously used for the production of playground equipment. Workpiece length 250 - 6000 mm Workpiece width 40 x 250 mm Workpiece height 20 - 150 mm 1 x 4-axis main spindle 20 kW; 1 x 5-axis universal spindle 24 kW 2 x 24-position tool changer Axis-controlled part insertion with insertion table Precise workpiece measurement with barcode reader Automatic workpiece transfer from Power-Grip clamp table 1 to clamp table 2 Adjustment speeds: X-axis 110 m/min, Y-axis 120 m/min, Z-axis 60 m/min Gtsdpet Ira Aefx Ag Tjt Automatic outfeed and unloading of workpieces Very well maintained and well cared for machine

Condition: used, functionality: fully functional, mileage: 27,000 km, power: 400 kW (543.85 HP), gearing type: automatic, fuel type: gas, color: grey, overall weight: 800 kg, Year of construction: 2011, operating hours: 27,000 h, machine/vehicle number: MAN E2876 LE 302, E2876 LE 301, Gas CHP (Combined Heat and Power) units, 2 x 195 kW electrical, 2 x 255 kW thermal, fuel consumption 51.6 m³/h. Gedpfew D A Rysx Ag Tett

Condition: used, Year of construction: 2006, machine/vehicle number: 21741076, JCB loader frame, axles, hydraulics. Gtedpfx Agsv Immus Tot

Condition: new, LST, Type DSG, Serial number L220455, with quick release, opening width approx. 1,000 mm Gtsdpfxeu Rc Tyj Ag Tet

Condition: new, functionality: fully functional, empty load weight: 2,800 kg, operation weight: 2,800 kg, Year of construction: 2024, New pulverizer for excavators from 25 - 40 tons. 360 degree rotatable. Gtodownxr Uopfx Ag Tet

Year of construction: 1999, condition: good (used), functionality: fully functional, End milling machine for portal construction ready for use Gtjdpfjhzt Nhex Ag Tet

Year of construction: 2007, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 282395-6570 002, No minimum price - guaranteed sale at the highest bid! Fully automatic cutting and processing of aluminum profiles in throughfeed for building elements, facades, furniture and industrial applications. Machine was overhauled in 2022 - in-transport plastics renewed, Schüco service done and adjusted, new circular saw blade purchased, and more TECHNICAL DETAILS Processing length: max. 7,500 mm Profile cross-section: max. 160 x 270 mm height Working height feed magazine/machine: 950 / 1,120 mm Pneumatic operating pressure: 6 ± 1.5 bar X-axis travel: 246 mm Y-axis travel: 250 mm Speed: max. 170 m/min Positioning accuracy: ± 0.1 mm / 1,000 mm Angle of rotation B-axis: max. ± 45° Saw motor power: 3 kW Saw blade speed: max. 3,000 rpm Tools Saw blade diameter: 550 mm Condition: new in 2022 Godpfx Aju U Hf Eeg Tett MACHINE DETAILS Rated voltage/frequency: 400 V / 50 Hz Number of phases/neutral conductor/protective earth conductor: 3 NPE Rated current consumption: 35 A Machine weight: 1,700 kg Note: The machine's take-off has been shortened, but can be extended again