Used Cool for sale (7,765)

Condition: excellent (used), Suction & Filtration Trolley Manufacturer: Anton Metzger Model: MKR 400 S Capacity: 400 liters Chodpfow Avzpsx Aqved Technical data, see photo Documentation available Length: 2650 mm Width: 800 mm Height: 1440 mm Weight: 610 kg

Condition: used, Spraying the full product with cold water to cool it down to approx. 40 °C. Allows clean labelling and creates a vacuum in the bottle. With cooling tower for recooling the spray water from the tunnel cooler with recirculation. Additional title: full product cooler, with splash water recooling Capacity of filling line: 5000 bo/h Chjdsw Tmpdjpfx Aqvod Features: Cooling tower for spray water recooling with circulation (Richter Cooling Systems, 2015)

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cooling capacity: 1,380 kW (1,876.28 HP), Watercooled centrifugal Chiller McQuay 087L, 1 circuit with 1 centrifugal compressor Cooling Capacity at 12/6C° = 1380 KW (400 refr.tons) with Shell&Tube evaporator and Condenser R 134A Chodpfxex D Upxo Aqvjd ready for operation in working order

Condition: like new (used), functionality: fully functional, cooling capacity: 895 kW (1,216.86 HP), type of input current: three-phase, type of cooling: air, overall weight: 6,525 kg, input voltage: 400 V, total width: 2,400 mm, total length: 12,960 mm, total height: 2,850 mm, warranty duration: 6 months, Gas cooler & Evap CX heat pump Güntner S-GGDV CD 090.1 DE/2C-E-44 Gas cooler capacity: 895.0 kW Evaporator capacity: 465.0 kW Refrigerant temperature: inlet 120.0°C — outlet 37.0°C (gas cooler) Evaporation temperature: -2.0°C (evaporator) Air flow: 216092 m³/h Fans: 24 pcs. EC, 3~400V 50-60Hz Tubes: copper / Fins: epoxy coated Heat exchange surface: 4839.5 m² Max operating pressure: 130.0 bar Cjdpfx Aqezqui Eevohd Dimensions: 12.96 x 2.4 x 2.85 m Weight: approx. 6525 kg Condition: used for testing

Condition: excellent (used), Continuous Sterilizer / Cooker-Cooler FMC-JBT STERILMATIC – 1 kg Format Continuous sterilizer FMC-JBT STERILMATIC (Cooker-Cooler), designed for the continuous thermal treatment of packaged food products, automating the sterilization and cooling stages within a high-production industrial line. This type of system is especially designed for canning plants that need to replace batch processing with a continuous flow of packages, allowing for the constant input of product, its thermal treatment for a controlled time, and subsequent cooling before continuing to the next stages of the line. Equipment configured for an approximate 1 kg format. MAIN FEATURES -Manufacturer: FMC / JBT -Series: STERILMATIC -Type: Continuous sterilizer / Cooker-Cooler -Installed format: 1 kg -Continuous thermal treatment of packages -Automatic sterilization and cooling process -Continuous product transport -Control of dwell time during the process -Industrial thermal circulation system -Integrated treatment sections -Piping, valve, and process distribution system -Integrated fans / circulation systems -Robust industrial construction -Designed for continuous operation -Especially suitable for high-capacity canning lines PROCESS The FMC-JBT STERILMATIC is designed to perform the thermal treatment of packages as they continuously move through the equipment. The previously filled and sealed packages are automatically introduced into the system, where they remain for a controlled process time and are subjected to the established thermal conditions to achieve the required treatment. Subsequently, the packages move to the cooling stage, progressively reducing their temperature before being discharged and transferred to the next production operations. The continuous system avoids the repetitive loading and unloading operations typical of conventional batch autoclaves and is particularly interesting for lines with large production volumes. APPLICATIONS Especially suitable for canning industries and manufacturers of high-production canned foods that require a continuous thermal process. It can be integrated into production lines for vegetables, legumes, tomato products, fish, meat, pet food, ready meals, and other packaged foods, always in accordance with the configured format and thermal process. Chsdpfx Aqszxcb Ejvod The combination of FMC-JBT STERILMATIC technology, continuous sterilization, and Cooker-Cooler system provides an industrial solution for large-capacity canning lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: like new (used), Year of construction: 2020, 431 USED Wachtel Freezer, Cooler, and Proofer. The unit is new and unused. EQUIPMENT: 1. Wachtel Copro TL - Freezer, -25°C - 0°C. 2. Wachtel COOLING k - COOLER AND PROFER, from +2°C to 35°C. EXTERNAL DIMENSIONS (in cm): - Width 1000, - Depth 440, - Height 300. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile. Chjdpfx Aezifpmeqved

Condition: excellent (used), functionality: fully functional, Rühle MKR 130 | Vacuum marinating machine with cooling Manufacturer: Rühle GmbH Lebensmitteltechnik Model/Type: MKR 130 Machine number: 506 Drum capacity: 130 liters Power supply: 380 V, 3 phases, 50 Hz Rated power: 3.15 kW Overall dimensions: 1150 × 750 × 1250 mm Chjdpfsy T Stvsx Aqvsd Condition: missing side cover The Rühle MKR 130 is an advanced, compact vacuum marinating machine equipped with a cooling system, belonging to the highly regarded “High-Tech-Tumbler” series. The device is designed for professional marinating, massaging, brining, and enhancing various types of meat (including poultry), fish, and seafood in food processing plants, artisan butcher shops, and catering establishments. Key features and functionalities: - Integrated cooling system: Allows for precise temperature control inside the drum throughout the entire marinating cycle. This prevents overheating of the raw material, guaranteeing the highest microbiological standards and excellent brine binding. - Vacuum technology: Conducting the process under vacuum accelerates the opening of meat pores, which enables faster and more uniform absorption of the marinade, increasing the juiciness and yield of the finished product.

Year of construction: 1997, condition: good (used), Chiller, cooling water circuit, heat exchanger, cooling for spot welding equipment, spot welding machine, spot welding system, spot welding gun, cooling unit -Manufacturer: Deltatherm, water cooler Type: DE-HI -Power: 1.7 kW -Individual components: see photos Chsdpozcwu Nofx Aqvsd -Dimensions: 1300/800/H1760 mm -Weight: 321 kg

Condition: new, Year of construction: 2025, Technical Data Manufacturer: Rittal Model designation: SK 3359.500 Product type: Cooling unit Refrigerant: R-513A Quantity: 0.4 kg Cedpfxozg Nlas Aqvehd Operating voltage (max.): 230 V Height: 417 mm Width: 597 mm Depth: 380 mm Color: White

Condition: ready for operation (used), Axial Fan Condenser Water Cooler Pressure tested, ready to use. Located Locally in: Hungary (EU) Cedpfx Aozhg Aljqvehd

Condition: ready for operation (used), Axial Fan Condenser Water Cooler Pressure tested, ready to use. Located locally in: Hungary (EU) Chsdpfjzhg Izox Aqvod

Condition: used, Year of construction: 2009, AI Overview A 13-meter tube-in-tube heat exchanger paired with a mono (progressive cavity) pump is a heavy-duty industrial setup designed for continuous heating or cooling of high-viscosity, abrasive, or fiber- and particulate-laden fluids (such as wastewater sludge, digestate, food purees, pulps, or industrial effluents). [1, 2, 3] Core System Components & Description Tube-in-Tube (Double-Pipe) Heat Exchanger (13 Meters): Design: Consists of a concentric layout where a smaller inner tube (often corrugated to boost turbulence and heat transfer) is nested inside a larger outer shell tube. Flow Configuration: The process fluid flows counter-currently through the inner tube, while the service/heating/cooling medium flows through the annular space between the inner and outer tubes. Length & Scale: A 13-meter run (frequently modular or multi-pass/series-connected units mounted on a skid frame) provides an extended thermal exchange surface area suited for duty points requiring significant temperature delta (Δ T) without clogging. Cedpfx Asz Ru Ereqvohd Handling Solids: Ideal for fluids containing suspended solids, large particles, or fibers up to tens of millimeters that would choke standard plate heat exchangers. [1, 2, 3, 4, 5, 6] Mono Pump (Progressive Cavity Pump): Function: Acts as a positive-displacement feed pump that delivers a steady, controlled, low-shear flow rate of the product medium into the heat exchanger. Why it fits: Progressive cavity ("mono") technology prevents pulsation and handles abrasive, thick, or high-viscosity slurries smoothly without damaging sensitive cell structures or choking under backpressure. [1] Key Applications Wastewater and sewage sludge heating or cooling. Viscous food-industry processing (sauces, pulps, creams, purees). Industrial effluent and dye-house waste heat recovery. Continuous thermal treatment requiring plug-flow characteristics and easy Clean-in-Place (CIP) maintenance Usage: Cooling or Heating of Viscous Products Previously Used on: Yoghurt and Juice Pastes Pump: Mono Pump Meters of Tube in Tube: 13 Condition: Very Good Available: Immediately

Condition: used, Band filter system, coolant treatment system, coolant filter AME - AMADA type PS 100 Gravity-fed paper band filter Manufacturer's number 12918, year of manufacture 2017 Filter capacity for emulsion: approx. 100 l/min. Filter capacity for oil: approx. 70 l/min. Tank capacity: max. 300 liters Width of the filter fleece roll: 710 mm Overall height of the filtration unit: 560 mm Submersible pump motor power: 0.24 kW Submersible pump flow rate: 100 l/min. Submersible pump pressure: 0.7 bar Power connection: 400 Volt, 50 Hz. - Submersible pump BRINKMANN, type TB 100 - Tank with 3 float switches - Sight glass for fill level - Filter fleece roll housed in a box with a lid - Float switch for filter fleece chain drive - Contamination collection container for filter fleece - Can be moved with a pallet truck, both longitudinally and transversely Space requirement: L x W x H 1700 x 920 x 1100 mm Chedpfo Agw Egsx Aqvjd Weight: 230 kg Very good condition Application: Compact filter for coolant, equipped with a roll of filter fleece for cleaning coolants in machining operations. Self-contained cleaning unit, also in combination with chip conveyors, e.g. on machining centers, or as a local filter for several machine tools. Also suitable for grinding machines. Function: Dirty liquid flows into the filter basin and, after passing through the filter fleece and support belt, flows into the clean tank. The retained dirt particles build up a filter cake and increase the flow resistance – the level rises. When a defined height is reached (via a float switch), the band drive is activated, bringing clean filter fleece onto the filter surface. The flow rate increases, and the level of the dirty liquid decreases again. The contaminated fleece ends up in a dirt and sludge container.

Condition: used, The Braibanti/Pavan extruder is designed for the continuous production of short-cut pasta, breakfast cereals, and pet food. The prepared dough is conveyed through a temperature- and moisture-controlled screw extruder toward the die, which ultimately defines the shape of the product. Extrusion takes place under controlled pressure and temperature to ensure consistency and structural integrity. At the end of the extruder, a motorized, speed-controlled rotating knife cuts the extruded product to the desired length. Prior to extrusion, the dough undergoes a structured preparation process. It begins with a two-step mixing system that combines dry and wet ingredients into a homogeneous mass. This system uses a single mixing arm with directionally adjustable paddles to ensure proper pre-conditioning and hydration. The final stage of preparation takes place in a high-performance mixer/kneader unit, which further develops the dough structure to achieve optimal plasticity, consistency, and elasticity-critical parameters for stable and high-quality extrusion performance. Continuous mixer - preconditioner PR220 (2-line version) ± 100 L / screw Single mixing shaft with adjustable paddles, dual execution Motor 2 x 18,5 Kw - 978 rpm Liquid and dry ingredient supply Inspection and cleaning hatch Mixer VM210 ± 150L Single mixing shaft execution with adjustable paddles Motor 1.5 KW - 1461/64 rpm Extruder BR220 Dual execution, 2 extrusion heads Chedpfx Aqo Agvygoved Motor 2 x 37Kw - 1482 rpm Gearbox Sumitomo Cyclo Double-walled extruder housing, suitable for cooling Production capacity (Pet food) calculated at 30-40 kg/min (depending on the product) Operating pressure ± 30-40 bar depending on the die Powered cutting head/chopping knife (motor 1.1 Kw -920 rpm) Dimensions (L x W x H): 5.000 x 2.200 x 2.400 mm Possibility to run 2 separate products, 2 extrusion lines on 1 frame. without electric cabinet and controls

Condition: used, Year of construction: 2016, 1) Zyklomat coolant cleaning system, application: cleaning of grinding emulsion, cleaning capacity: 350l/min, recirculation clean tank-dirty tank: 100-350l/min, max. machine supply: 250l/min, supply pressure: 3.5bar, filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3, separation limit: approx. 5µm, medium: emulsion 3-6%, max. medium temperature: 50°C, solid particles: brass particles, max. solids quantity: 15kg/h, total volume: 5.14m³, operating volume: 3.6-4.58m³, process: fully automatic full-flow filtration, sludge discharge: fully automatic, with non-flowing consistency, 2) double scraper tank for grinding sludge KR 1.75-5.1, total volume: 5.14m³, max. volume: 4.58m³, length: 4,000mm, including 70mm reinforcement, width: 1,890mm, including 140mm reinforcement, height: 1,105mm, including 100mm base profile, neck height: 2,300mm, max. theoretical discharge capacity: 15kg/h, function: coolant storage tank with integrated clean tank, sedimentation and flotation tank with fully automatic sludge discharge, serviced annually, fully functional, no known defects, with documentation. An on-site inspection is possible. Chsdezvghkspfx Aqved

Year of construction: 2009, condition: ready for operation (used), A double-sided trolley cooling system Werner & Pfleiderer for bread production is available. Refrigerant: R404A, refrigerant type: HFC, minimum temperature: -25°C, design temperature low pressure/high pressure: -45°C/50°C, design pressure low pressure/high pressure: 16bar/28bar, internal dimensions X/Y/Z: 1800mm/1200mm/1900mm. Machine dimensions X/Y/Z: approx. 2750mm/2200mm/3150mm. Baguette target temperature/cooling time: -20°C/28min, bread roll target temperature/cooling time: -20°C/14min, pretzel target temperature: -14°C. Documentation available. An on-site inspection is possible. Chodpfxozdknqs Aqvjd

Year of construction: 2026, condition: new, functionality: fully functional, new PMH filament line extruder 30 mm - 28 l/d with noozle for 3D-filament with cooling tank with blow-up system for adhesive water Chsdpfx Aqoch Sfqeved with Laser control system (option) with puller with filament accumulator (option) with winder and traverse guide MADE in GERMANY

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Straight Machine Direct Drive InlineColorPilot IPC (Graphometronic): Automatic inline Register, color measuring and controlling system PressPilot Center APL (Fully-Automated Plate Changing ) IntegrationPilot plus Automatic Impression Cylinder Washing Device Automatic Ink Roller Washing Device Automatic Blanket Washing Device with Brush SelectAntistatic for Feeder & Delivery Eltex Non-stop LCS: Low Coverage Stabilisation of Inks QuickStart: re-start with fewer waste sheets Ink. Temperature Control Grapho Metronic Technotrans Cooling Device QuickChange Infeed: Automated selection and motorized setting of the frontlays to be used. QuickChange Air: Job specific air settings for all relevant consumption points via the control console Double Sheet Control - electronic Rolandmatic Dampening Airglide Delivery BECKER VariAir Supply System Powder Exhauster Schneider incl. SCIP Dynamic Sheet Brake Codpfx Aqsx Nm Adjvshd Impression Account: 270 Mio.

Condition: good (used), Year of construction: 2009, machine/vehicle number: 3001, Ryobimatic Dampening PCS-J: Off Press Ink & Register Control RPC Semi Automatic Plate Change PDS-E: Print Density Control Bacher Register System Technotrans Cooling Device Csdehuampepfx Aqvohd Remote Register Correction Sheet Detection Control Double Sheet Control Mechanical And Electrical Automatic Blanket Washing Device Automatic Ink Roller Washing Device Impression Account: 20 Mio.

Condition: new, Year of construction: 2022, Base sheet fiber laser metal cutting machine with full protection Chedpfxjhwhfqo Aqvsd Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, laser type: fiber laser, laser source manufacturer: Bodor, laser power: 12,000 W, warranty duration: 60 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. Csdpfohwhf Asx Aqvohd With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: used, Chip conveyor, scraper conveyor with coolant tank, BMF Type KF 200 K17 Ident. No.: Order No.: 915979 Year of manufacture: 1992 Width of metal links: 200 mm Distance between carrier bars: approx. 380 mm Length of possible chip discharge: 1100/2100 mm Insertion length: approx. 1350 mm Insertion height: 370 mm Insertion width: 460 mm Hopper width at the top: 400 mm Hopper width at the bottom: 170 mm Conveying height – discharge height: approx. 1250 mm Motor power, belt drive: 0.37 kW Mains connection: 400 volts, 50 Hz - Drive of the scraper chain via geared motor - Coolant tank without coolant pump Space requirement L x W x H: 3800 x 1300 x 1650 mm Weight of chip conveyor: approx. 500 kg Good condition Cjdpfohwt H Asx Aqvehd The chip conveyor comes from a GILDEMEISTER CNC lathe. The conveyor is suitable for the chip transport of a milling machine, lathe, or machining center.

Condition: good (used), Year of construction: 2001, I sell the 3-axis CNC working centre HOLZ-HER UNI-MASTER 7226 with beam table Year 2001. Configuration: 3-axis main spindle recently full reconditioned / Water cooled Tool magazine 6 positions HSK63 on working head 1 grooving saw X-direction Drilling head 16+4 spindles Useful working area 3100x1360mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Holzher software controller with full instructions. 2x Pump SIEMENS ELMO-L S22 2,35KW. Cedpsi U Dxuefx Aqvehd Good condition. Available immediately.

Year of construction: 2017, condition: good (used), heating cooling device HB Therm 140 Z1 Serie 5 Water, 140°C 9 KW + new Service ! year: 2017-2018 Codpfx Aokn Elneqvjhd price: 4.650 € contact: Mr. Rainer Eckerle

Year of construction: 2017, condition: good (used), heating cooling device HB Therm 140 Z1 Serie 5 Water, 160°C 9 KW + new Service ! year: 2017-2018 Chedpfx Aqekn Enueved price: 4.950 € contact: Mr. Rainer Eckerle