Used Cooling Technology for sale (30,143)

Year of construction: 2024, condition: new, - Demonstration machine from 01/2021 completely made of stainless steel including Washing pump - Automatic basket drive - Touch button for turning the basket outside the Cleaning procedure - Tank cover and sieve filter under the basket stainless steel - Protection against dry running - Door security switch - Connections for plate phase separator (oil separator) - Inner basket width 1180 mm - Usable height of the basket to the lower edge of the nozzle holder 675 mm - Flat jet nozzles - washing pressure 4 bar - Return bend as a condenser for little water consumption Dkodpjg Hgcwefx Ah Ujw - including 20 KG LCT Power Star 50-730 - delivery after receipt of payment within 5 - 6 weeks - 24 months guarantee

Year of construction: 1999, condition: used, power capacity 1,5 kW feed pressure 11 bar liter capacity 160 l weight of the machine ca. 0,15 t dimensions of the machine ca. 1,5x0,5x0,8 m 380 V, 50 Hz with plug and cable Dkodpfsu Sbd Tsx Ah Usw colour: light grey 2 cylinder, boiler 90 l compressor has been checked in our workshop, electr. testing report included!

Condition: used, Aqua’s optimised adiabatic cooling system achieves a perfect balance between load, water usage and fan speed. The innovative control management system engages the water spray only when absolutely necessary. This ensures maximum water evaporation with minimum water wastage. In addition, all spray pipework is constructed in stainless steel rather than plastic, eliminating any risk of corrosion. The coil is protected with a hydrophilic coating. Adiabatic coolers are low-maintenance, cost-effective, and environmentally friendly options for temperature control at your facility. They are a popular alternative to cooling towers and are used in situations requiring water temperatures of 25˚C and above. Dkjdpfx Aowv Raajh Uow

Condition: good (used), Year of construction: 2001, functionality: fully functional, Cleaning Centrifuge Machine type: SA100-B55-1 Year of manufacture: 2001 Rotor speed: 2,980 rpm Rotor diameter: 365 mm Maximum sludge compartment capacity: 2–8 kg Weight: 525 kg Dedpsw Ewyrjfx Ah Uskw Motor power: 5.5 kW Operating voltage: 5.5 kW The machine was serviced regularly and was connected to a parts washing machine in a paint shop.

Condition: used, functionality: fully functional, Year of construction: 2019, Type: SG-3000-2DD Info: Max.Glass Dimension: 1800*2800mm (bottom floor); 2000*3000mm (top floor) Max.Glass Thickness: 15+15mm Min. Glass Thickness: 3+3mm EVA Film Thickness: 0.25-0.76mm Machine dimension: 3680*2260*1650mm Machine weight:2ton Installed Power: 46KW Heating power: 43KW Heating temperature 0-130C Dedpfxowarqzo Ah Uskw Electricity 380V 50HZ Sensors: 8 Available glass: float glass +float glass; tempered glass + float glass Vacuum value: -0.1Mpa

Year of construction: 2015, condition: excellent (used), Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: -230 V -0,7 A -50 Hz -IP 65 Dkjdpfjk Eakvjx Ah Ujw

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 35 h, functionality: fully functional, total width: 87 mm, total length: 120 mm, maximum load weight: 200 kg, heating capacity: 7.2 kW (9.79 HP), tank capacity: 400 l, warranty duration: 24 months, type of input current: three-phase, inner dimension height: 600 mm, inner dimension length: 800 mm, inner dimension width: 500 mm, overall weight: 150 kg, input voltage: 400 V, input frequency: 50 Hz, workpiece weight (max.): 200 kg, LCT NW 180 BSS demonstration tank Dual frequency 27/80 kHz Ventilated stainless steel control cabinet Hinged lid Tank completely insulated Stainless steel washing cork with four crane eyes and a basket bar for lifting Four adjustable feet for uneven floors Floor emptying via ball with inclined tray base for complete emptying Floor grating Bottom and 2 x side sound with a total output of 3000 watts Timer with timer and program control Connected load 10.2 KW Dodpfoq Rd R Dsx Ah Uokw

Condition: ready for operation (used), Condition Used Stock Number 412948 This listing is for a PPM Technology Formaldemeter 400 The formaldehymeter from PPM Technology type Formaldemeter meter 400 is designed to measure the concentration of airborne formaldehylevels along with the temperature and the humidity. This meter is able to display the concentration of formaldehyin the units of parts per million (ppm) and in number of milligrams per cubic meter (mg/ m3). Djdsvaq Adepfx Ah Uokw

Condition: used, 619569.0, 35-40 ADVANCED, MS Ultrasonic, ultrasonic generator Model: 619569.0 Type: 35-40 ADVANCED Condition: Used Djdpot Txbdjfx Ah Uokw

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 6,000 W, laser wavelength: 1,064 nm, table length: 3,050 mm, table width: 1,550 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, type of input current: three-phase, overall weight: 6,500 kg, Equipment: CE marking, cooling unit, documentation/manual, safety light barrier, skyCUBE XLs class – Large Format – Shuttle Table Laser Cutting The multifunctional flatbed laser center skyCUBE XLs class, produced by PFEIFER technology in Saxony, Germany, is engineered for your professional cutting tasks. It combines advanced productivity with economic efficiency and precision. The machine housing is manufactured from welded and bolted steel construction, specifically designed for industrial and commercial applications. The drive system developed by PFEIFER technology ensures both precision and high repeat accuracy. skyCUBE laser systems meet all requirements of Class 1 according to DIN EN 60825-1, providing you with maximum safety. The ergonomic design with a pull-out worktable facilitates easy loading of the machine. Drawers in the lower section collect cutting residues efficiently. The skyCUBE laser software with file import capability generates precise laser cutting geometries for your requirements. Optimize your cutting quality and speed—even with thick materials—thanks to the 6kW laser power, including when using compressed air. Switch between materials while maintaining consistently high cutting quality without compromise. Monitor your production with ease: the large front doors allow convenient access to the entire working area. Dodpow Ebzmsfx Ah Uekw Position the operator console wherever you prefer. It is mobile, providing optimal visibility of the cutting process at all times. Naturally, your safety is the highest priority when operating the skyCUBE laser! The skyCUBE XLs is a Class 1 laser system. There is no risk of coming into contact with laser beam emissions or reflections during operation. With all our laser systems, nothing is more important than complete safety and compliance with the highest standards and regulations. Special safety glass panels and a perfectly shielded cutting area reliably protect you from laser radiation risks, while an independent safety system enables loading without interrupting production. Select the laser power that best suits your requirements; 6 kW is our current standard! (* Pricing depends on configuration and laser power; this is a factory-new laser machine from our own production) Maximum dimensions (L × W × H): 2310 × 8505 × 2505 mm / Laser machine: 4.0 T Power supply: depends on laser source (6kW), 400V/50Hz, 3-phase / 27kW Process gas control for: oxygen / nitrogen / compressed air according to material and process

Condition: as good as new (ex-display), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 288457-290911, Stroj je nov,nikada nije koristen Dkedovp Smvepfx Ah Usw

Year of construction: 2015, condition: excellent (used), Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: - 230 V - 0,7A - 50 Hz - IP 65 Inclusion dimensions: 2060 x 650 x 1260 mm Belt width: 390 mm Dkedslatz Dopfx Ah Ujw Belt length: 2000 mm

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, Crumbler HB KRU 6 Length and diameter of crumb roll: 1740 x Ø 250 mm Dodpfxjra Dn Se Ah Uskw Engine: 7.5 and 11 kW Weight: 2100kg

Condition: new, Year of construction: 2023, Wood gasification technology that converts biomass (wood chips) into wood gas. The obtained wood gas is used in the production of electricity and heat. Gasifiers are reaching electrical efficiency up to 30% and with fuel utilisation rate up to 90%. The capacity of one unit is up to 140 kWel and heat up to 300 kWth. System is modular and can be used both for small project and also larger plants with electrical power up to 2000kWel and heat up to 4000kWth. Energy-producing systems are additionally equipped with wood gas filtration and cooling systems, ash removal, and emergency cooling systems. Offer for one unit include : - Wood chip feed module - Gasifier - Control cabinet for gasifier - Air preheater - Gas filter Dkjdpfx Ahspa Sthe Ujw - Gas cooling module - Safety filter module - Ash discharge module - Cold start module - Waste bunker - Wiring set - Engine unit with generator - Control cabinet for engine - Gasifier chimney for cold start - Chimney for engine

Condition: used, 7001481, 20 ADVANCED, MS Ultrasonic, Ultrasonic Generator Model: 7001481 Type: 20 ADVANCED Condition: Used Dkjdjt Txayspfx Ah Ujw

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, table length: 3,050 mm, table width: 1,550 mm, type of input current: three-phase, overall weight: 6,500 kg, Equipment: cooling unit, safety light barrier, skyCUBE XL class – Large Format – Shuttle Table Laser Cutting Djdpfx Ahjt A N A Rj Uekw The multifunctional flatbed laser center skyCUBE XL class, manufactured by PFEIFER technology in Saxony, Germany, has been designed for your professional cutting applications. It combines a new level of productivity with cost-effectiveness and precision. skyCUBE laser systems meet all requirements of Class 1 according to DIN EN 60825-1, offering you the highest level of safety. The ergonomic design with a pull-out worktable makes machine loading easier. Drawers in the lower section of the machine collect cutting waste. Optimize quality and cutting speed even with thick materials thanks to 6kW laser power—even when cutting with compressed air. Switch between materials while maintaining consistently high cutting quality without compromise. Naturally, you’re always on the safe side when operating the skyCUBE laser! The skyTUBE Pro is a Class 1 laser system. There is no risk of exposure to laser beam emissions or reflections during operation. For all our laser systems, nothing is more important than complete safety and compliance with the highest standards and regulations. Special safety glass and a perfectly shielded cutting area reliably protect you from the hazards of laser radiation, while an independent safety system allows loading without interrupting production. Select the laser power best suited to your needs; 6 kW is our current standard! (* Pricing depends on configuration and laser power; this is a brand-new laser machine manufactured by us) Maximum dimensions (L×W×H): 2310×8505×2505 mm / Laser machine 4.0 T Power supply depending on laser source (6kW) 400V/50Hz 3 phase / 27kW Process gas control for: oxygen / nitrogen / compressed air depending on material and process Laser processing made easy and highly precise – high-speed, high-quality laser cutting

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, working range: 4,150 mm, travel distance X-axis: 4,150 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 2,500 kg, type of input current: AC, input voltage: 400 V, sheet thickness aluminum (max.): 250 mm, table length: 4,500 mm, operating speed: 1,000 mm/s, table width: 2,300 mm, tank capacity: 8,000 l, pressure: 4.1 bar, table height: 900 mm, operating pressure: 4,000 bar, warranty duration: 6 months, table load: 2,500 kg, overall weight: 8,000 kg, input frequency: 50 Hz, power: 45 kW (61.18 HP), D2 MONSTER M5 high end waterjet cutting machine, completely reconditioned 2025, all vital components replced and condition even better then new. This machine had very little working hours ( showroom useage ) but is currently being completely overhauled to ensure full warranty. The machine will be supplied as new with newest options and developments, including full warranty of 6 months. X-axis range 4150 mm Y-axis range 3200 mm Z-axis range 250 mm C-axis range +/- 275 degrees A-axis range +/- 70 degrees Table size 4500x2500 mm, cutting area in 3D: 4000x2300 mm Tilting arms for loading and unloading slabs up to 2500 kg. Pump BFT Ecotron 40.37 37 KW 3,8 L/min New pump, working hours 0 . Dksdpfx Ajvdnpioh Uew Software depending the application ( Metal or Stone ), to be discussed This machine is built for high precision work and foreseen with all possible options from cameras to anti collision feeler, electronic abrasive doseage with vacuum control, etc etc. Machine readyness to be agreed. This machine has a new value over 300.000 euro Water purification for pump water available on request as well as abrasive removal system.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, A conveyor belt from MK is for sale, with frequency converter. If you're interested, I'd be happy to send you a video of the conveyor. L: 3000 mm Width: 500 mm Dsdpfxov Tnxpe Ah Uskw Height: 580 mm Height: 300 mm - 900 mm Mobile, 4 brake rollers Adjustable conveyor speed, 1-11 m/min

Year of construction: 2023, condition: new, machine/vehicle number: 001, The Stainless Steel Molasses Mixer is an advanced machine designed for homogeneous mixing of raw materials with liquids such as molasses and steam. With its two shafts and high-quality stainless steel construction, this machine offers durability and efficiency in one. The strength of this molasses mixer lies in its ability to deliver a continuous mixing process with an impressive capacity of 60 tons per hour. This makes it ideal for industrial applications where consistent and even mixing of materials is crucial to the production process. The machine's stainless steel construction ensures not only durability but also hygiene, making it suitable for applications in the food industry and other sectors where strict standards apply to materials in contact with products. Whether in the production of animal feed, chemical mixtures or other industrial processes, the stainless steel molasses mixer guarantees reliability and consistency in the mixing process, making it a valuable asset for modern production environments. Power:2 x 22 kW Speed:1500 rpm 2. volume: 600 liters 3. capacity:60 Tons/Hour Dsdpferk Ipnjx Ah Ujkw 4. weight: 2500 kg

Year of construction: 2000, condition: refurbished (used), The FKS-10CP suppository filling, cooling and sealing equipment for pre-formed moulded plastic packaging for suppositories. In the year 2019 the plant mechanically and electronically was completely overhauled is as new. Before delivery the plant is test-run using suppository, casings supplied by CP-Citopac GmbH Dodjfc I Haspfx Ah Uokw More technical details you found in the Datasheet.

Condition: used, 612435.1, 20 ADVANCED, MS Ultrasonic, Ultrasonic Generator Dedpfx Aet Tw Sheh Uokw Model: 612435.1 Type: 20 ADVANCED Condition: Used

Condition: new, Year of construction: 2025, laser type: fiber laser, laser power: 6,000 W, laser wavelength: 1,064 nm, working length: 1,250 mm, working width: 1,250 mm, Equipment: CE marking, cooling unit, documentation/manual, P class = processing area X 1250 mm x Y 1250 mm x Z 100 mm High-precision linear motor axis system with 6 KW laser power Dodpfx Ahok Ran Ee Uskw (* Prices depending on equipment and laser power, this is a brand new laser machine from our production) Simple and highly precise laser processing - laser cutting at high speed and quality

Condition: used, Year of construction: 2022, functionality: fully functional, total length: 880 mm, total width: 540 mm, total height: 1,460 mm, overall weight: 210 kg, input voltage: 230 V, power: 2 kW (2.72 HP), input frequency: 5,060 Hz, Capacity: 60 single ties/min Dkodpfjwzk A Sox Ah Uow

Year of construction: 2020, condition: new, A fully automated film rewinding machine according to GMP guidelines. Foil rewinding machine type FUM-900 CP This film rewinding machine is used to rewind film rolls that have run in large systems or are not wound with the correct winding tension, and thus to prepare them for further processing. It was designed according to the special pharmaceutical guidelines and for the processing of PVC film. Advantage of our machine: with two separate drives, we can guarantee both right and left winding. Dedjfwfpbjpfx Ah Uskw Technical details: Width: 1,600 mm Depth: 850 mm Height: 1,100 mm Materials: In contact with the product: 1.4301 / acrylic Performance: up to 120 m / s Speed: infinitely variable Ø film rolls: max. 450 mm Connection: 230 V / 50 Hz Drive: direct current 0.25 kW

Year of construction: 2020, condition: new, Fully automatic system for filling preformed packaging (unit dose) made of plastic for various liquid media. Such as CBD oil, eye solution, buffer solution etc. Models of packaging see appendix - are manufactured by us! Perfomance: 5,000 liquid packages per hour depending on container shape and the Dkedpfx Ahjfx N Uie Uow viscosity of the product. Dosing range: 1 - 10 ml (depending on packaging) The dosing range is set when the machine is at a standstill, via the dosing pump control unit. The entire system is constructed according to the requirements of hygienic design and conforms to GMP. If you have any further questions, you can reach us by email or by telephone on the number given.