Used Copy Device for sale (12,230)

Condition: used, Automatic lathe, turning machine with copy attachment UMA Type F1 NK 60 Copy lathe for chuck parts Machine no. 28-0031 Year of manufacture: 1971 Maximum turning diameter: 150 mm Swing diameter over bed: 400 mm Turning length: approx. 200 mm Spindle bore in machine spindle: approx. 42 mm Spindle speeds: 580 / 930 / 1480 / 2380 rpm, 4 steps Main motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle flange for chuck mounting, short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speed via 4 gearbox steps - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying unit SAUTER Type KMCA 61, with hydraulic feed movement - Left side with cross slide with hydraulic feed movement - Coolant system mounted below the machine bed - Hydraulic unit positioned behind the machine - Operating manual, electrical diagram, hydraulic diagram Space requirement automatic lathe with hydraulic unit (L x W x H): 2900 x 1900 x 1700 mm Space requirement automatic lathe (L x W x H): 2400 x 1900 x 1500 mm Space requirement hydraulic unit (L x W x H): 1400 x 850 x 1700 mm Weight automatic lathe: 2400 kg Fpedpfsib D H Rex Ahnoh Weight hydraulic unit: 400 kg Total weight with pallet: 3000 kg In good condition

Condition: used, Hydraulic Copying Device SAUTER Type KMC 8001 Copy turning attachment, copying device for lathes The copying device comes from a lathe. Connections for oil supply and oil return Copy stroke: approx. 140 mm Radial travel at 60° mounting: 120 mm Required operating pressure: approx. 25 bar Oil flow rate: max. 7 liters/min. Lathe drive power: max. approx. 15 kW Chip cross-section: max. 3.5 mm² Copying slide stroke: approx. 125 mm Distance from turning tool to tracer: 800 mm Net weight of copying device: 120 kg Fsdjxxmf Iepfx Ahneph Good condition The matching hydraulic power unit and holders for the pattern parts can be found on our website under the search term 'Sauter'.

Condition: good (used), Image processing control unit, camera control -Manufacturer: Vision Device, camera controller for 2 cameras -Type: unfortunately no further type designation -Individual components/connectors: see photos Fjdpfx Ajxvp S Eehnoph -Dimensions: 200/145/H110 mm -Weight: 1.4 kg

Condition: like new (used), Device for cleaning die-cut sheets German production, Metabo. 230V power supply. Easy-to-use, manual device for removing external waste from the pallets of die-cut sheets. Fsdpfjwyxi Rsx Ahnsph Safe, two-handed operation of the device.

Condition: excellent (used), Model: 4M/65E Condition: Very good Dimensions: 80.00 (H) x 60.00 (W) x 120.00 (L) inches Additional Description: - Automatic copy lathe - To make spades, shovels, curling's, gun holders, axes, legs, cricket bats and so on. - Makes 4 pieces at the same time. - Router (no sanding attachment) Fpedpfjxz Tfajx Ahnoh - Speed regulation on slide. - Works great

Condition: excellent (used), EM TEST esd NX30 ESD Simulator 30 kV Manufacturer: EM TEST / AMETEK Type: esd NX30 Device Type: ESD Simulator / EMC Test Device Professional ESD testing system for performing ESD immunity tests according to IEC 61000-4-2 and ISO 10605. The device generates air and contact discharges up to 30 kV and is suitable for EMC laboratories, development, quality assurance, and certification applications. Technical Data Air discharge: 200 V to 30 kV ±5 % Contact discharge: 200 V to 30 kV ±5 % Polarity: positive / negative / alternating Operating modes: single and continuous operation Frequency: 0.5 to 20 Hz, air discharge up to 25 Hz Color touch display Integrated event and activity logger Power supply: battery and mains operation Battery capacity for up to 30,000 discharges at 30 kV Remote interface via fiber optic USB Interlock function Remote trigger EUT fail detection Scope of supply EM TEST esd NX30 base unit ESD gun with color display Power supply Transport case 2 discharge networks as shown in the pictures Adapters and accessories as shown in the pictures Dimensions Fpodpfx Aezc Ehwehneh Base unit: approx. 170 x 360 x 140 mm ESD gun: approx. 85 x 270 x 260 mm Weight base unit: approx. 6.5 kg Condition Used device. Optical condition as shown in the pictures. Signs of wear and tear due to age and use. A complete technical functional test has not been carried out. Sale according to condition and scope of supply as shown in the pictures. Shipping or freight shipping is possible. Subject to changes and errors.

Condition: used, / weight 75 kg Center height: approx. 215mm dimension Length: about 370mm Width: about 260mm Height: approx. 340mm Chuck diameter: 190mm Lining passage: 60mm Weight: 75kg Fpedpfx Aszcq Hxehnoh NEIGHBOR

Condition: used, / weight 140 kg dimension Length: about 430mm Width: approx. 530mm Height: about 370mm Weight: 140kg Fpjdpfszcq Hlsx Ahneh

Year of construction: 1968, condition: good (used), 1 used thread whirling machine for lathes make Burgsmüller type L 2 serial number 68/1724 Fpedpfx Ahepit Afonoh

Condition: used, Used crane runway system with vacuum handling Year of manufacture: 2017 Load capacity: 250 kg (at lifting device) Crane runway: 6 m Bridge: 6 m Vacuum lifter B 3 UW H K 250 V with 2 oval suction plates 500 x 2500 mm Fpsdpfx Aezc Agdohneh Vacuum generation: pneumatic with ejector Operating pressure: 7 bar, filtered compressed air required Air consumption: approx. 7 NL/sec. with ABM electric chain hoist Lifting speed: 0...10 m/min, infinitely adjustable Operation via special handle on the vacuum lifter. Lifting movement is infinitely variable by frequency converter Availability: by arrangement Storage location: Hesse

Condition: ready for operation (used), AGIE PRD-02 A2 Process Regulator device 613880.4, serial number as per photo, used, good condition, 100% functional, scope of delivery as per photos Fedpoi D Tycjfx Ahnoph

Condition: ready for operation (used), AGIE PRD-01 C Process Regulator Device 613890.3, serial number as per photo, used, good condition, 100% functional, scope of delivery as per photos Fpsdpfx Asi D Tx Uehnoh

Condition: ready for operation (used), Agie Process regulator device PRD-08 B 629.792.3 with Agie Process regulator device PRD-09 B 629.743.6 , used, small traces of use, 100% functional Fsdpoi D Tygjfx Ahneph

Condition: ready for operation (used), Agie Process regulator device PRD-10 B 614.130.3 , used, slight signs of wear, 100% functional Fpjdpfxei D Tyke Ahnsh

Condition: used, Roll guiding device WITELS-ALBERT Berlin, type ER 7 Guiding roller width: 30 mm Guiding roller diameter: 30 mm Belt cross-section: approx. 1.5 x 10 mm or 0.5 x 25 mm - Individual adjustment for the 3 upper guiding rollers via wing nut and lock nut Fpjdpfx Ahezczvdsnsh - Quick-release mechanism via eccentric lever for the 4 lower guiding rollers - 2 pre-forming guiding rollers, Ø 32 x 13 mm, mounted with a 90° offset - For guiding strip steel, last used for a belt cross-section of approx. 1.5 x 10 mm Space required L x W x H: 250 x 100 x 150 mm Weight: 5 kg Good condition

Condition: new, centre height // mm total power requirement / kW Fedpfezcgfqox Ahnoph weight of the machine ca. / t required space / m Parts machine for lids FP1 / FP2 Condition: NEW

Condition: excellent (used), length 690 mm thread M16 height 1020 mm weight of the machine ca. 360 kg Angle table with breadboard table LxWxD: 1020x690x40 mm Fixing LxW: 330x690 mm Thread: M16 Weight: 360 kg Fpsdpfx Aszcgk Tehnsh

Condition: used, length 800 mm width 600 mm height 600 mm Fjdpszcgfwsfx Ahnoph weight 410 kg

Condition: used, centre height 160 mm Fodpfx Ahezcgb Sonsph chucking diameter 200 mm hollow 54 mm

Condition: excellent (used), Year of construction: 2018, liter capacity 200 l Fedpfozczkzjx Ahnjph feed pressure max. 200 bar coolant capacity 950 l Control Siemens total power requirement 45 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 2,4 x 1,5 x 2,9 m

Condition: used, 1 HELLA GUTMANN MEGA MACS X diagnostic device with charging station and PANASONIC CF-D1 Toughbook Color: as shown in the pictures, according to the images and inspection Condition: used Fpsdjzcmg Uopfx Ahnsh Location of the item: Hall 1 Payment method: prepayment by bank transfer Shipping: Self-collection only from the Hofgeismar location

Condition: new, HEIDENHAIN Incremental encapsulated length measuring system LS 187 – ID 526971-09 Fpsdpozcgy Ujfx Ahneh New HEIDENHAIN length measuring system, unused. The original packaging was opened solely for the purpose of taking photographs. Manufacturer: HEIDENHAIN Type: LS 187 ID Number: 526971-09 Device type: Incremental encapsulated length measuring system Measuring length: 940 mm Accuracy class: ±5.0 µm Pitch period: 20 µm Output signal: 1 Vpp Reference mark: In the center of the measuring length Mounting type: Integrated mounting strip Supply voltage: 5 V ±5 % Electrical connection: Flange housing, 14-pin, separate adapter cable

Year of construction: 2025, condition: new, The universal assembly and adjustment device (HSK 63) for securely clamping all types of aggregates outside the machine—regardless of the design and machine interface. In addition to maintenance work on the aggregate, shank tools or complete tool sets can be reliably mounted and set up, whether in the aggregate itself, in tool holders, or on milling arbors—quickly, precisely, and safely. Fsdpfx Ahsxmb Nweneph Thanks to compatibility with all standard machine interfaces, the device can be used flexibly, independent of the position and number of locking or support pins on the aggregate. Even tool holders with nesting turbines fit without issue. Whether it’s angle adjustments on the swivel unit, adjusting tool positions on the tracing aggregate, or tool changes on a multi-spindle drilling head—our assembly and adjustment device is THE essential tool for every workshop with a CNC machine. - Simple handling of aggregates of various designs - Suitable for all common machine interfaces - Safe clamping and alignment of tools - Universal use in assembly, service, and production - Robust construction for permanent use Availability: immediately from stock Warehouse location: Flörsheim

Condition: new, Year of construction: 2022, HOLZKRAFT Raw Air Extractor ASA 7703 Mobile chip extraction system with a rotating extraction unit and four extraction nozzles (Ø 100 / 120 mm) for milling, planing, and sawdust (not for dust) Nominal flow rate: 7,700 m³/h Fjdjwhui Ajpfx Ahneph Extraction nozzle outlet: 1 x Ø 100 | 3 x 120 mm Extraction nozzle inlet: 1 x Ø 260 mm Vacuum pressure: max. 2,800 Pa Filter area: approx. 11.96 m² (2 x 5.98 m²) Chip bag volume: 2 x 290 liters Power consumption: 4.8 kW | 400 V - 50 Hz Idle speed: 2,950 rpm Sound pressure level: max. 98.3 dB(A) Dimensions (L x W x H): 1,900 x 670 x 2,800 mm Net weight: approx. 88 kg Includes 2 fine filter bags and 2 chip bags Availability: Short-term Storage location: Flörsheim

Condition: new, Year of construction: 2022, HOLZKRAFT Raw Air Extractor ASA 7703 Mobile chip extraction system with a rotating extraction unit and four extraction nozzles (Ø 100 / 120 mm) for milling, planing, and sawdust (not for dust) Nominal flow rate: 7,700 m³/h Extraction nozzle outlet: 1 x Ø 100 | 3 x 120 mm Extraction nozzle inlet: 1 x Ø 260 mm Vacuum pressure: max. 2,800 Pa Filter area: approx. 11.96 m² (2 x 5.98 m²) Chip bag volume: 2 x 290 liters Fodpfx Ahowhui Njnsph Power consumption: 4.8 kW | 400 V - 50 Hz Idle speed: 2,950 rpm Sound pressure level: max. 98.3 dB(A) Dimensions (L x W x H): 1,900 x 670 x 2,800 mm Net weight: approx. 88 kg Includes 2 fine filter bags and 2 chip bags Availability: Short-term Storage location: Flörsheim