Used Pulling Device for sale (12,714)

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool Djdpfxoznk R Te Acpocn -Withdrawal device: for square notching dies -Dimensions: see photos -Quantity: 2x pullers, 1x with fine thread -Submission/Price: complete -Dimensions each: 200/140/90 mm -Weight: 2.4 kg/pc.

Condition: excellent (used), The DAGE Series 4000 Bond Tester is a professional device designed for performing Bond Pull and Die Shear tests in the semiconductor and electronics industries. This device is used in quality control laboratories, research and development departments, and during the production of microelectronic components. This unit is equipped with a precision positioning table, joystick controls, a keypad panel, and work lighting. The set also includes the original PCI control card (Baldor NextMove PCI-2 Motion Control Card) and additional electronic components visible in the photos, which are a valuable addition to the set. Technical data: Manufacturer: DAGE (Nordson DAGE) Dcjdpfezma Tbjx Acpen Model: DAGE Series 4000 Bond Tester Year of manufacture: 2010 Power supply: 110 / 230 V AC, 1-phase Frequency: 50/60 Hz Power: 250 VA Control: joysticks and keypad Precision XY positioning table Required compressed air: 4 bar (oil-free) Vacuum connection Excellent visual condition. The set being sold is consistent with the presented photos and includes all visible components, including the additional PCI control card.

Condition: used, functionality: fully functional, overall weight: 3,000 kg, operation weight: 3,000 kg, maximum load weight: 3,000 kg, empty load weight: 3,000 kg, loading space volume: 18 m³, loading space width: 2,000 mm, loading space length: 3,000 mm, loading space height: 3,000 mm, Year of construction: 2022, operating hours: 2,000 h, machine/vehicle number: K22092001, ## Complete Nitrogen Generation System – Generator + High-Pressure Booster + Chiller For sale: a complete industrial nitrogen generation and high-pressure supply system, designed for use with high-power fiber laser cutting machines. The system allows nitrogen to be generated on-site and supplied to the laser at the required high pressure, significantly reducing dependence on liquid nitrogen deliveries. ### Complete system includes: * Nitrogen generator * High-pressure nitrogen booster * Industrial chiller / cooling system * Control system * Filtration and necessary system components ### Technical specifications: Dodpfezv T Abex Acpjcn Nitrogen generator * Nitrogen purity: up to [99.99%] * Nitrogen capacity: [30 Nm³/h] * Outlet pressure: [8 bar] * Automatic operation High-pressure booster * Maximum nitrogen pressure: [200 bar] * Capacity: [25 Nm³/h] * Designed for continuous industrial operation * Suitable for fiber laser cutting applications Chiller * Cooling capacity: [XX kW] * Designed for cooling the nitrogen booster/system * Industrial continuous-duty design ### Application The system was used for supplying nitrogen to a high-power fiber laser cutting machine. Suitable for laser cutting of: * Stainless steel * Aluminum * Carbon steel and other materials where high-pressure nitrogen cutting is required The equipment is sold as a complete system. Condition: Used, fully functional Location: Lithuania Availability: Immediately available The system can be inspected and tested on site. More photos, videos, and detailed technical specifications are available upon request. Worldwide transport can be arranged.

Condition: used, Year of construction: 2019, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity forklift: 2,500–5,000 kg Fork length: 1,350–2,000 mm Mounting: FEM 3A MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,350 x 800 x 1,000 mm Net weight: 250 kg EQUIPMENT Hydraulic telescopic forks For loading onto a pallet for truck loading All dimensions are approximate. No guarantee is given for typographical or measurement errors. Dcodpfsz Iw Hxjx Acpon Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 1103

Year of construction: 2022, operating hours: 15 h, condition: used, functionality: fully functional, operation weight: 30 kg, feed force X-axis: 20,000 N, pipe diameter (max.): 14 mm, machine/vehicle number: 79000, Lancier Smart Wheel 2022, used very little Very few operating hours (approx. 38 hours) Includes extensive accessories Includes HONDA EU22i generator Includes cable guiding set 2.6 mm - 3.7 mm Includes cable guiding set 6.7 mm - 9.0 mm Includes drive wheel set without groove 0.8 - 3.4 mm Includes drive wheel set with groove 3.5 - 9.0 mm Includes steel transport box Includes compressed air hose with claw coupling, 10 m The blowing device Automatic logging For cable diameter 1.5 - 9 mm For outer pipe diameter 7 - 14 mm Blowing speed 0 - 100 m/min Djdpfxezphdtj Acpjcn Thrust force 20 daN L x W x H 500 x 400 x 400 mm Weight: approx. 30 kg Order no. 79000

Year of construction: 2004, condition: used, functionality: fully functional, For sale: Peripheral equipment for plastic injection molding. The grinders, mills, and temperature control units were in operation until 03/2026 and have been replaced by a new machine park. 3 units Wanner grinders, Compact series C17.26, year of manufacture 2006 2 units Kurtz grinders, SR 173, year of manufacture 2002 9 units Kurtz K-mills, SR 171, year of manufacture 2003 10 units Wieser mills, WG-SR 170/110, year of manufacture 2003 1 unit Colortronic M102L sprue grinder, year of manufacture 2006 20 units HB-Term temperature control units, HB-CW 90, year of manufacture 1999 1 unit Wittmann temperature control unit, Tempro 1 TP 140, TS001537/001, year of manufacture 2000 1 unit Wittmann temperature control unit, Tempro basic 140, TS002073/001, year of manufacture 2000 3 units Wittmann temperature control unit, Tempro 2, year of manufacture 2000 Conveyor belts as shown in the picture Operating manuals available Complete purchase of all items preferred; individual purchase possible by agreement. Dcedpfx Aoz Hvgbjcpsn

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand “Canon High Capacity Stacker H1/J1” finishing machine Item for sale: 1 x Canon High Capacity Stacker H1/J1 Condition: This offer is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). Djdjz Ixzqspfx Acpjcn Compatible with various Canon imagePRESS models, including the C650/C750/C850, C710/C810/C910 and C8000VP/C10000VP. The device has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, Offered for sale is a Komet ISG3100 shrink fitting machine for the precise and rapid shrinking of tools in shrink chucks. The device is ideally suited for use in CNC machining, toolmaking, mold making, and modern cutting processes. Thanks to the induction technology, tools can be quickly and reliably shrunk in and out. The compact design and ease of operation make the device an efficient solution for daily tool preparation. Features: Manufacturer: Komet Type: ISG3100 Induction shrink fitting technology Fast heating of shrink chucks Simple and safe operation Dsdpfxjzu Ikko Acpecn Suitable for various tool holders Compact and robust industrial design Ideal for CNC machining and tool management Advantages: High concentricity accuracy of the tool holders Fast tool changes Reliable tool clamping Reduction of setup times Long service life of the tool holders Suitable for series production and single-part production with various holders from HSK30 to HSK100 Used, fully functional. Shows signs of wear consistent with its age.

Condition: excellent (used), Year of construction: 2019, 1.0 unit, two-component dispensing system with material feed and mixer. Djdpoz Hn Ecsfx Acpecn Manufacturer: KOCH - Technik Type: GK-65 / 612D / GK65 / Year of manufacture: 2019

Condition: excellent (used), functionality: fully functional, Equipment: foot remote control, Excellent condition Rotating device with adjustable height, featuring joints on both sides (the component does not need to be aligned due to the joints) Motor-driven, with foot pedal, adjustable clamping range for your component Dimensions: Minimum height 550mm, maximum height 1300mm Mounting plate 440 x 300mm Base dimensions per side approximately 1600mm x 1200mm Optionally, a perforated table or a component of any size can be clamped 3000 kg load capacity, motor-braked Dcjdpfez Hvurjx Acpjn One side driven, the other side rotates passively.

Condition: ready for operation (used), ProPen P 3000 PN Marking Device Marking area: 100 × 100 mm Max. workpiece height: approx. 330 mm Max. traverse speed: 154 mm/s Character size: 0.5–79.9 mm Compressed air: 6 bar Power: 120 W Dcedpfx Ajz Hi R Tocpjn Weight: approx. 30 kg Dimensions: approx. 420 mm × 270 mm × 740 mm (L x W x H) You are welcome to visit us for a demonstration. We will gladly organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and browse our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data and errors in the description of the item may occur and are subject to change.

Condition: used, For sale is a high-quality TESA Micro-Hite 3D height gauge in a large, motorized version, offered as a complete measuring workstation. This system combines precise height measurement with extended 2D/3D coordinate functions, making it ideal for use in quality assurance, metrology, and production. Particularly noteworthy is the extensive range of accessories and the existing PC connection with printing capability, which allows measurement reports to be created and documented directly. Technical specifications: Manufacturer: TESA (Switzerland) Model: Micro-Hite 3D Type: Height gauge / 3D-capable measuring column Measuring range: approx. 600 mm (large version) Dcedpfxsy Tkg Uj Acpen Resolution: up to 0.0001 mm (0.1 µm) Drive: motorized adjustment Measuring system: digital / electronic Data output: interfaces for PC / peripherals Measuring functions: Height measurement Internal and external measurement Diameter measurement Distance measurement 2D/3D point measurement Geometry and position calculations Equipment: Granite measuring plate Stable machine base Motorized measuring column Integrated control unit External PC workstation (monitor, computer, input devices) Printer for report output Accessories: Extensive set of measuring probes (ruby tips, extensions, etc.) Tool holders and fixtures Accessory case / wooden box The measuring device has already been disassembled and packed.

Condition: good (used), Equipment: foot remote control, The rotary table is motor-driven and features a foot switch; the clamping range can be adjusted to suit any component. Upon request, a perforated table of any size can be supplied. 3000 kg load capacity, motor-driven braking system. One side is driven, the other side rotates passively. Center height from the floor: 1000 mm, mounting plate size: 700 x 450 mm. Two sets of the same size are available. Dedpfsz Hvl Rox Acpscn

Condition: used, 1 bending machine / rod twisting machine, TRISCHLER with various aluminum sheets Color: as shown in the pictures, according to the images and inspection Condition: used Location of the goods: workshop Dcedez I Nltspfx Acpen Payment method: prepayment by bank transfer Shipping: self-collection only from the location in Bischofswiesen

Condition: used, 3 x Fässler deburring machines Dcjdpsz H Ridjfx Acpen Individual sales possible.

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18031539, workpiece weight (max.): 750 kg, workpiece diameter (max.): 600 mm, total width: 650 mm, total length: 704 mm, total height: 585 mm, empty load weight: 334 kg, input voltage: 400 V, type of input current: three-phase, JAVAC POS-750AC welding positioner for sale. Technical specifications: - Manufacturer: JAVAC - Model: POS-750AC - Year: 2018 - Serial Number: 18031539 Dodpfx Aozuyaqscpscn - Input voltage: AC 400 V / 50 Hz - Permissible welding current: 400 A / 100% - Table diameter: 600 mm - Hollow shaft: 60 mm - Table speed: 0.12–1.2 rpm - Tilting range: 0–135° - Max. vertical load: 750 kg - Weight: approx. 334 kg - Approximate dimensions: 704 x 650 x 585 mm Used equipment, sold as is. Currently available for inspection but not connected to power. Condition and completeness are shown in the photos. Location: Estonia. Loading: Forklift and pallet handling facilities are available on-site. We can load the equipment onto the buyer’s truck. Transportation: Transportation costs are the responsibility of the buyer.

Condition: used, RMS Vibration exciter / vibration testing system RMS SW 6005 Vibration exciter sold exclusively as a source of spare parts A used vibration exciter from RMS Regelungs- und Messtechnik is for sale. The device is explicitly sold solely as a source of spare parts. Functionality has not been tested. Operational readiness or completeness is not guaranteed. Technical data: Manufacturer: RMS Regelungs- und Messtechnik Designation: Vibration exciter Type: SW 6005 Further technical specifications on the nameplate are partially damaged and not completely clearly legible. Equipment: RMS vibration exciter SW 6005 Mounting plate with threaded holes Lateral pneumatic suspension elements Lifting/lowering device Control and connection housing Transport/lifting eyes Base frame Dsdpfxjz Iqh Ao Acpscn Existing mounting and supply components Accessories as shown in the pictures Application areas: Spare parts sourcing Maintenance of existing vibration testing systems Supply of spare parts and sub-assemblies Retrofit and repair projects Scope of supply: 1 × RMS SW 6005 vibration exciter Existing mounting and supply components Accessories as shown in the pictures Weight: approx. 700 kg Condition: Used Optical condition as shown in the pictures Signs of wear and tear due to age and use Functionality not tested Sold exclusively as a source of spare parts. The device is explicitly not offered as a functional machine. No guarantee for function, operational readiness, or completeness. Shipping or freight shipping possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: new, mileage: 1 km, power: 425 kW (577.84 HP), fuel type: diesel, tire size: 325/95 R 24, axle configuration: 6x6, wheelbase: 42,000 mm, fuel: diesel, fuel tank capacity: 390 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 16, emission class: euro3, suspension: steel, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, electric window regulation, power assisted steering, retarder, traction control, - Autoradio - CD - Power windows front - PTO - Sun visor - Tool box - Transportation - Twin wheels - Xenon headlights Engels Mercedes-Benz Arocs 4058 AS 6x6 Heavy-Duty Tractor – Euro 3 The Mercedes-Benz Arocs 4058 AS 6x6 Heavy-Duty Tractor is built for specialised transport where traction, pulling capacity and drivetrain durability are essential. Its 578 hp OM473 engine, permanent 6x6 drivetrain, Turbo Retarder Clutch and reinforced configuration make it a solution for heavy haulage, mining, infrastructure and project logistics. Key Highlights - Factory-new Mercedes-Benz Arocs 4058 AS 6x6 - Mercedes-Benz OM473 15.6L Euro 3 engine - 578 hp (425 kW) / 2,800 Nm - Mercedes PowerShift 3 / PowerShift Advanced - G 280-16 transmission - Turbo Retarder Clutch - Permanent 6x6 all-wheel drive - Gross train weight up to 180,000 kg - JOST JSK38C 3.5-inch heavy-duty fifth wheel - 36-tonne fifth-wheel mounting plate - Heavy-duty front and rear coupling equipment - Mercedes-Benz MB131-2c factory PTO - N3G Grounder off-road specification - ClassicSpace L-Cab with sleeper bed Built for Heavy-Duty Transport The Arocs 4058 AS combines the 15.6-litre OM473 engine with 2,800 Nm, PowerShift 3 and a Turbo Retarder Clutch for controlled heavy starting, manoeuvring and operation with high combination weights. Its permanent 6x6 drivetrain, differential locks, planetary rear axles, reinforced leaf-spring suspension and off-road protection support reliable operation in demanding environments. Heavy-duty coupling equipment at both ends also supports specialised trailer and push-pull operations. Applications - Heavy haulage and low-loader transport - Mining and quarry logistics - Heavy machinery transport - Infrastructure and construction projects - Oil, gas and energy projects - Specialised push-pull transport Dcodpfx Asy Rt Nmscpjn Technical Specifications Vehicle: Mercedes-Benz Arocs 4058 AS 6x6 Engine: OM473 Euro 3 Power: 578 hp / 425 kW Torque: 2,800 Nm Transmission: PowerShift 3 / PowerShift Advanced Gearbox: G 280-16 Drive: Permanent 6x6 GVW: 40,000 kg GTW: 180,000 kg Wheelbase: 4,200 mm Fifth wheel: JOST JSK38C 3.5-inch PTO: Mercedes-Benz MB131-2c Cab: ClassicSpace L-Cab Tyres: 325/95 R24 Why Schaften Automotive? Schaften Automotive specialises in supplying factory-new Mercedes-Benz, MAN, IVECO and Scania trucks for international markets. We support customers with vehicle sourcing, export documentation, custom body solutions, international transport and worldwide delivery. With extensive experience in heavy-duty, construction, mining and transport vehicles, we provide solutions for customers across Africa, the Middle East and other export markets. Contact our team for availability, export options and worldwide delivery. General information Year of manufacture: 2026 Technical information Number of cylinders: 6 Engine capacity: 15.600 cc Drivetrain Make of engine: Mercedes Benz Axle configuration Tyre size: 325/95 R 24 Brakes: drum brakes Suspension: leaf suspension Layout Number of berths: 1 Other information Availability: in stock Rent kmly price currency: EUR

Condition: ready for operation (used), Mahr Marsurf XR 1, Marsurf SD 26 roughness measuring instrument, measuring instrument, granite measuring plate Mahr Marsurf XR1 with Marsurf SD 26 feed unit: Measurement of roughness, waviness, and profiles Measuring range: ±250 µm Measuring range with longer stylus arm: up to ±750 µm Vertical resolution: up to 0.7 nm Measuring length: 26 mm Feed speed: 0.1–1.0 mm/s Positioning speed: 5 mm/s Motorized height adjustment: 7.5 mm Measuring force: approx. 0.7 mN Cut-off: 0.08 / 0.25 / 0.8 / 2.5 / 8 mm Individual measuring lengths: 1–50 Evaluation: Roughness, waviness, and profile Measured parameters: including Ra, Rq, Rz, Rt, Rp, Rv, RSm, Rsk, Rku, Rk, Rpk, Rvk Software: MarWin Djdpez H Uklofx Acpecn Measuring stand: MarSurf ST-D Measuring plate Dimensions: 600mm x 500mm Brand: Bilz Type: F60-50 Max. load capacity: 130 kg You are welcome to visit us for an inspection. We will gladly arrange a cost-effective shipping service for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and browse our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: good (used), Corpus lifting and alignment device Belt conveyor table with lifting and alignment device Fezer vacuum lifter Control system: Mitsubishi Melsec Dimensions: 3600 x 1200 x 930 mm Djdpjvdcmvjfx Acpecn You can find more new and used items in our shop! International shipping costs available upon request!

Condition: good (used), For sale is a universal length measuring device with numerous accessories from the brand Helios, in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Helios Messtechnik • Type: 27 773 001 • Control model: Unitron 2 CHA • Universal length measuring device / adjustment device / shaft measuring device • With numerous accessories for various measurements • Mounted on a workshop trolley with contents (See pictures) • Condition: Used, functional (The cable or connector of the control unit would need to be replaced, presumably not original; the display turns off after a few seconds) Shipping costs via freight forwarder: approx. €140 International buyers are welcome! Dedpfx Ajzxiv Njcpjcn You will receive an invoice with VAT shown. Inspection / collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free on board. Subject to errors in technical data and prior sale.

Condition: used, This listing is for a Molecular Devices ClonePix 2 2019 with Compressor The Molecular Devices ClonePix 2 Mammalian Colony Picker is a fully automated system for the selection of high-value clones used in antibody discovery and cell line development. The ClonePix 2 picker enables a picking speed of greater than 10,000 clones per day making it 10 times faster than labor-intensive limiting dilution and FACS. The ClonePix 2 by Molecular Devices features multiple detection methods, integrated plate storage, animal-free media and reagents, sterility maintenance, and discrete colony formation Dcsdoxzg I Ispfx Acpon

Year of construction: 2003, condition: excellent (used), Press-fitting device for ceramic pins in rotor shafts Operating principle: The ceramic pins are fed from a test station via a pneumatic hose using an oscillating feeder. At the test station, the position of any existing one-sided bore is checked using an optical sensor. Incorrectly positioned parts are conveyed to a collection container via a pneumatic slide. Correctly positioned pins are fed to the singulator of the press-fitting tool via another pneumatic hose. Dcsdpfx Aeib H U Docpen The actual press-fitting process is also carried out pneumatically using a roller bearing-guided plunger. Initially, a manually adjustable pressure p1 is used to control the process and ensure that the pin is not pressed too easily into the shaft. Then, a second, also manually adjustable pressure p2 is used to press the pin firmly into the rotor shaft. A disc spring package pre-tensioned with 5,000 N prevents excessive force from being exerted on the pin and shaft. The rotor shaft must be manually inserted into, removed from, and clamped in the tool by an operator. This process is secured by a light curtain. Design Self-supporting station, integrated into a complete system, for press-fitting ceramic pins and balls. Rotor shafts Diameter: 5 - 20 mm Length: 50 - 200 mm Ceramic pin Diameter: 3 mm Length: 5 +/- 0.2 mm Operating cycle Output: 15 cycles per minute Safety Protective door with safety switch Light curtain, Category 4 Emergency stop Airborne noise emission Continuous sound pressure level at the workplace: 70 dB (A) Electrical connection Voltage: 230 V AC Frequency: 50 Hz Fuse: 10 A Compressed air connection Operating pressure: 5 - 7 bar Dimensions L x W x H = 850 x 950 x 1020 mm Weight: approx. 110 kg Year of manufacture: 2003 Electrically adjustable work table height Documentation and circuit diagrams are available. You can find other press-fitting devices – new and used – in our shop! International shipping costs on request!

Condition: ready for operation (used), Tesa Hite 700 Height Gauge, Measuring Instrument Measuring range: 715 mm Resolution: 0.001 / 0.005 / 0.01 mm Error limit: ≤ 8 µm Repeatability on a plane: ≤ 3 µm Repeatability on an arc/bore: ≤ 5 µm Measuring force: 1.5 ± 0.5 N Accessories: Calibration standard You are welcome to visit us for a demonstration. We would be happy to arrange cost-effective shipping for you! Dcodpfoz Hi N Aex Acpsn You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from the technical data as well as errors in the description of the article may occur and are subject to change.

Condition: ready for operation (used), Year of construction: 2007, Stiefelmayer Brivisor KL-4 Hardness Testing Machine Testing height: 150 mm (with testing table) Outreach: 200 mm Device footprint: 560 mm x 250 mm x 770 mm (W x D x H) Load range: 0.05 - 10 kgf Weight: approx. 45 kg Year of manufacture: 2007 Vickers: HV 0.1 | 0.3 | 0.5 | 1 | 2 | 3 | 5 | 10 Brinell: HBW 1/5 and HBW 1/10 Dsdjzzynhjpfx Acpocn You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the article may occur and are subject to change.