Used Corn Chopper for sale (263)

Year of construction: 2016, operating hours: 50 h, condition: like new (used), functionality: fully functional, Impiantinox Easybräu SCB 500 brewing system consisting of mash/boiling kettle, lauter tun, hot water tank Agitator in the mash tun Chopper in the lauter tun Electrically or steam heated Electrical connection 40 kW Steam condenser in the boiling kettle Dsdpsq H Azzsfx Afxocl Brewing volume from 3.5- 7 HL Complete internal piping with pumps, electric heating Heat exchanger for wort cooling Wort aerator

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Dcjdex R D Efopfx Afxsl Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVD Pump support bench ATEX: Ex-d-IIB-T4 – IP55 Power: 11 kW Atmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: excellent (used), functionality: fully functional, VEMAG HP30E | Vacuum filler with chopper and loading system Manufacturer: VEMAG Maschinenbau GmbH Dcjdpfeziqr Tjx Afxel Model / Type: HP30E Power supply: 400 V / 50-60 Hz / 3 phases Hopper capacity: 350 liters Filling capacity: Up to 8700 kg/h Portioning range: From 1 to 99,999 g Portioning speed: Over 600 portions/min The VEMAG HP30E is one of the most powerful and reliable vacuum fillers in the industrial class, designed for continuous, high-performance operation in large meat processing plants, slaughterhouses, delicatessen facilities, and large-scale catering operations. Thanks to the use of a unique dual auger technology (VEMAG Duo-Drive), the raw material is handled extremely gently, which eliminates stress on the meat structure and guarantees a perfect, clear cross-sectional appearance of the finished product. A key advantage of this unit is its integration with a filling chopper. This system allows for simultaneous final comminution of the product to the desired granulation and removal of hard particles (tendons, cartilage) just before the portioning process. The machine performs excellently not only in the production of raw, scalded, or baked sausages, but also in the precise dispensing of meat mixtures, pet food, and other thick food products directly into packaging lines or clipping machines.

Condition: good (used), Urban Corner Cleaner type SV 815/4 Dodpfjlx Ar Aox Afxocl

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range -10°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range -10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Dcsdpfx Afev Ivnzexjl Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range -10°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range -10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Djdsv Ivn Ujpfx Afxscl Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Condition: used, Year of construction: 1972, machine/vehicle number: 275, Eckeneinziehmaschine Kolbus EP- Corner Pulling Machine Kolbus EPYear 1972 - Serial-No. 275 Djdpfxsh Axdle Afxocl Size max: 405 mm Accessories: 2-corner-pulling-heads Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, used wet polishing machine from PERS, model Vibra-Line B 150 l, with buffer tank, in combination with PERS dryer Vibra-Dry A 200 l - both demo machines Technical data / Vibra-Line B 150 l: U-shaped work container with automatic discharge Capacity (gross): 150 l Usable volume (depending on workpiece geometry and material): 80 l Year of manufacture: 2024 Diameter, external: 1,170 mm Height: 860 mm Lining in the bowl: 22 mm, yellow or brown PU Total weight (empty): 320 kg Drive power: 2.2 kW Electrical connection: 3 x 400 V, 16 Amp. CEE Device color: RAL 7015/7035 Control cabinet with touch panel and frequency inverter Buffer tank – 90 l: The compound (soap solution) itself flows through the filter basket into the buffer tank, from which a submersible pump pumps the water back to the rotary vibrator. Dimensions of the buffer tank (L x W x H): 700 x 400 x 460 mm 1 submersible pump and 1 filter basket (630 µm) are included Technical data / Vibra-Dry A 200 l: Corn/grain dryer with automatic discharge - vibration dryer Year of manufacture: 2024 Volume: 220 l Motor power: 1.5 kW Heating: 3 kW per element (PTI temperature control) Capacity, workpieces: up to 65 kg Capacity, corn: 25-35 kg Speed: 1400 rpm Heating effect: 6 x 1.5 kW Length: 1,141 mm Width: 1,200 mm Height: 905 mm Internal dimensions of the bowl: 240 mm Electrical connection: 3 x 400 V, 16 Amp. CEE Dedpoy A N U Aofx Afxocl Device color: RAL 7015/7035 Corn granule temperature: +30 to +50 degrees Digital temperature control pneumatically controlled outlet valve For commissioning, 25 kg of corn kernels of type GM 16 or GM 20 must be used.

Condition: used, This listing is for the Thermo Scientific Heratherm IMH180 Incubator The unit is in full working condition and is ready for immediate use The Thermo Scientific Heratherm IMH180 is a high-performance, reliable incubator tailored for demanding laboratory tasks: Precision: Excellent temperature control and uniformity. Flexibility: Adjustable airflow, generous interior volume, and timer options. Convenience: Viewing window, internal socket, and connectivity via RS‑232. Cleanability & Space Efficiency: Stainless steel interior and stackable design. Advanced Safety (Security Model): Door alarms, lockable access, and high-temperature decontamination. Perfect for microbiology, cell culture, pharmaceutical testing, and drying applications where sample integrity and process control are critical. Design & Functionality Dual Convection Technology: Offers adjustable fan speed from 0 % (natural convection) to 100 %, enabling tailored air circulation depending on the sample type or protocol Temperature Range: Operates from 5 °C above ambient up to 105 °C, making it suitable even for drying tasks Temperature Uniformity & Stability: With fan off: ±0.6 °C spatial uniformity With fan at full speed: ±0.2 °C to ±0.4 °C uniformity (at 37 °C) Dcjdexhd Ixspfx Afxsl Temporal stability: ±0.1 °C (at 37 °C) Capacity & Build Interior Volume: 178 L (about 6.3 cubic feet) Shelving: Comes with 2 stainless-steel shelves (each supporting up to ~25 kg) and can accommodate up to 19 shelves for flexible arrangement Construction: Corrosion-resistant stainless steel interior (AISI 304) with easy-to-clean rounded corn Controls & Usability Controller: Microprocessor-based with a clear vacuum fluorescent display for easy setting of temperature, timers, and monitoring Timer Functionality: Programmable daily, weekly, or real-time ON/OFF cycles for scheduling experiments Extras: Internal power socket (120 V models) for operating devices like shakers or stirrers inside the chamber Internal glass viewing door and optional internal lighting for observing samples without opening the chamber RS‑232 interface for data logging and connectivity Stackable design without tools—efficient laboratory space use Safety & Maintenance Alarms: Automatic over- and under-temperature alert system protects sample integrity Security Model (IMH180‑S): Adds a lockable outer door and audible alarms for door‑open conditions Includes a certified 140 °C decontamination cycle (about six hours) to sterilize the chamber without needing an autoclave—ideal for high‑sterility environments Dimensions & Electrical Specs Feature Specification Exterior (W × D × H) 64 × 74 × 92 cm (25.2 × 29.1 × 36.2 in) Interior (W × D × H) ~46 × 54 × 70 cm (18.3 × 21.4 × 27.9 in) Weight ~70 kg (154 lb) Electrical (120 V) 1,020–1,390 W; 8.5 A at 60 Hz Materials Stainless steel (interior), durable housin

Condition: used, Hydropneumatic operation Max. punching height: 90 mm Abutment stroke: 100 mm Punching stroke: 20 mm Pressing force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg Dedpfow Inudsx Afxjcl

Condition: used, machine/vehicle number: 711065, Eckenrundstossmaschine / Corner Rounding Machine Krause Y6R Serial No. 711065/031 Tisch Modell / Table model Online-Video-Inspection by Skype-Video Dcsdpfx Ajiq Tlvefxjl We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Year of construction: 2006, Built in 2006 Size max 670x390 mm min 205x140 mm Speed 3.900 c/h Description: - with round corner device - Automatic setting Dcedpfx Afozlbdrsxel - Motorised setting - Automatic case counter - Board pre stacking conveyor - Board cutter: PS - Centre strip infeed (flexible) - Waste chopper - Cloth feeder: Non-Stop - Glue unit - Preheated glue tube - Viscosity control - Device for producing padded cases - Pressing station - Stacking delivery

Condition: ready for operation (used), Year of construction: 2018, overall weight: 2,722 kg, controller manufacturer: MITSUBISHI, controller model: M800, number of axes: 5, This 5-axis Mitsubishi MV1200R was manufactured in 2018 and features advanced capabilities such as X-Axis Travel of 15.7", Y-Axis Travel of 11.8", and Z-Axis Travel of 8.7". It includes a Mitsubishi M800 control, Auto Wire Threading, and a Chiller for enhanced performance. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV1200R machine we have for sale. Contact us for more information about this machine. Additional Equipment • Auto Wire Threading • Chiller • Remote 360 Installed • Round Diamond Guides Included • 1GB Partition • Wire Chopper • Angle Master Advanced Tapering • Angle Master Precision Taper Software • CFAST Compact Flash Card • Chiller Chopper • DNC Hardware Ethernet FTP • FS Power Supply • High Precision Alignment Gauge • Wire Alignment Gauge Included Machine Benefits Technical machine benefits: • X-Axis Travel: 15.7" • Y-Axis Travel: 11.8" • Z-Axis Travel: 8.7" • U/V Axis Travel: 2.4" x 2.4" • Degree Taper Cutting: 15 @ 8" • Glass Scale Feedback: X, Y, U, V • Workpiece • Precision: .000002" • Table • Inside Tank Dimensions: 31.9" x 27.6" Dcjdpfsx D Ryyox Afxsl

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range +5°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range +5°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz Djdpfxovz U Ers Afxscl CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Condition: used, Used AMIXON model HM 400 stainless steel vertical twin-shaft ribbon mixer. Dcodswr Dhcjpfx Afxol Manufacturer: AMIXON (Ruberg Mischtechnik KG) Model: HM 400 Gross volume: 530 litre (approximately) Working volume: 400 litre (approximately) Type of agitators: Twin shaft ribbons + side chopper Drive of agitators: 7/9 kW, 380 V, 970/1475 rpm (driven through gearbox) Drive of chopper: 5.5 kW, 380 V, 1475 rpm Includes: side inspection doors with dimensions 640 x 550 mm, control panel, hopper

Condition: excellent (used), functionality: fully functional, HUGHES Industrial Corn Husker – Stainless Steel HUGHES industrial corn husker, designed for the automatic removal of leaves and outer husks from corn cobs within industrial vegetable processing lines. The equipment allows for the continuous performance of one of the main corn preparation operations, significantly reducing the need for manual husking and providing a steady flow of cobs to the next processing stages. Its husking system, which uses husking rollers, allows for the progressive gripping and removal of leaves as the cobs move through the machine. MAIN FEATURES -Manufacturer: HUGHES -Type: Industrial corn husker -Application: Corn cobs -Function: Husk removal -Automatic and continuous processing -Husking system using rollers -Multiple processing rollers -Continuous cob feed -Controlled product transport -Separation of leaves and product -Robust industrial construction -Components and structure primarily in stainless steel -Top access for inspection and maintenance -Guards on moving parts Dsdpjwny Nhjfx Afxscl -Designed for industrial corn processing lines -Integrable with upstream and downstream equipment PROCESS The HUGHES husker receives the cobs with their outer leaves and distributes them onto the processing area. As they move forward, the cobs come into contact with the husking rollers, whose mechanical action allows the leaves to be gradually gripped and separated from the surface of the product. The removed leaves are separated from the main flow, while the husked cobs continue to the next stage of the line. It can be integrated with: Cob receiving systems Conveyors and elevators Inspection tables Washers End trimmers Corn shellers Blanchers and cookers Cooling systems IQF freezing tunnels Packaging lines APPLICATIONS Especially suitable for industrial processors of sweet corn, canneries, frozen vegetable manufacturers, and fruit and vegetable processing plants that need to automate cob preparation. The combination of HUGHES technology, a continuous roller system, and industrial construction provides a particularly interesting solution for sweet corn production lines for canned, frozen, or further processed products. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: ready for operation (used), functionality: fully functional, loading space width: 1,400 mm, loading space length: 2,900 mm, total length: 6,600 mm, total width: 2,150 mm, total height: 2,550 mm, TECHNICAL DETAILS Loading area length: 2,900 mm Loading area width: 1,400 mm Cutting shaft: 1 MACHINE DETAILS Total installed power: 48 kW Cutting shaft motor power: 37 kW Dcodpfxoxw U Hqj Afxol Dimensions (L x W x H): 6,600 x 2,150 x 2,550 mm

Condition: as good as new (ex-display), Infeed width: 720 mm Infeed height: 330 mm Rotor diameter: 1,000 mm Rotor knives: 2 pcs Stator knife: 1 pc Dodpfx Afegabfqoxscl Infeed unit: 2 x 3 rollers Motor: 110 kW Machine weight: approx. 8,000 kg

Condition: used, Year of construction: 2004, Used IMA model VORTEX 075 stainless steel high share mixer/granulator. - Manufacturer: IMA - Model: Vortex 075 Dcjdpswm Atmjfx Afxel - Vessel capacity: 85 litre total capacity, working capacity min/max 8/40 kg - Vessel lid and outlet valve are pneumatically operated - Includes: local control panel and switchboard Mixing system: - Impeller agitator is driven by 3,0 kW motor, maximum speed 118 rpm - Chopper is driven by 1,5 kW motor, speed 3000 rpm

Year of construction: 1984, condition: used, Corner connector, MachinePressta 7000, type PV 7. Dcedpei Dx A Eofx Afxjl

Condition: used, Year of construction: 2009, functionality: fully functional, 1 Universal Testing Machine Type H 10 KM Used device with Windows 11 software for tensile, compression, and bending tests; comes with one pair of wedge grips up to 10 kN and a certificate for tensile and compression displacement measurement. For testing in tension, compression, shear, bending, etc. • This is a dual-spindle benchtop model. • The machine complies with DIN 51220 and 51221, Class 1. • Digital display for force and displacement, 4½ digits, with peak value memory. • Five-range automatic switching for force and displacement measurements. • Digital speed adjustment from 0.5 to 1000 mm/min in increments of 0.1 mm. • Break detector and automatic return function are standard features. • Driven by a precision servo motor with high-frequency chopper control unit and digital feedback for load-independent, constant speed. • Quiet operation thanks to toothed belt drive and ball screw spindles with bellows cover. • Fully computer-controllable via RS 232 interface. Max. load: 10 kN in tension and compression Max. travel: 1150 mm without grips Force measurement: Strain gauge Measurement principle: Temperature-compensated Dedpoxghlfofx Afxjcl Displacement measurement: Built-in optical encoder, 0.01 mm resolution Power supply: 220-250 V, 50-60 Hz Power consumption: 1.0 kW Dimensions: Height 1575 mm, Width 635 mm Clear width of frame: 410 mm Weight: approx. 95 kg Includes: 10 kN load cell and certificate for force and displacement.

Condition: good (used), Year of construction: 1999, Magurit 547 | Guillotine for Frozen Blocks Brand: Magurit Type: 547 Machine Number: 2681 Year of manufacture: 1999 Power supply: 380 V Power: 10 kW Working width: 700 mm Dedpew Hl Aksfx Afxocl Overall dimensions: 2700 mm x 1250 mm x 2300 mm The Magurit 547 industrial guillotine is a high-performance machine designed for cutting frozen blocks of meat, fish, or vegetables. With a working width of 700 mm, this machine effortlessly handles standard raw material blocks, preparing them for further processing in bowl choppers or grinders. Its robust construction and 10 kW drive provide powerful cutting force, ensuring stable operation even at very low product temperatures.

Condition: used, Used Lödige model FKM 1600D stainless steel ploughshare mixer. 1600 litre total capacity and 550-1100 litre working capacity. Ploughshare mixing blades direct driven by 21-35 kW 400 volt 3/50 740-1479 rpm motor through Flender type 185 102 025-2-1 gearbox rated 31kW with 1500rpm input and 115rpm output. Unit has (2) MK 30/55 choppers with air purged seals driven by 5.5kw motors. Has (2) side inspection doors and pneumatically operated drop door discharge. Dcjdjzn Nmyspfx Afxjl

Condition: ready for operation (used), Year of construction: 2021, operating hours: 11,537 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, workpiece length (max.): 1,030 mm, Wire EDM machine from 2021 with only 11,537 operating hours! TECHNICAL DETAILS Travel Distances X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 350 mm Workpiece Data Workpiece weight: 1,000 kg Workpiece height: max. 350 mm Workpiece width: max. 800 mm Workpiece length: max. 1,030 mm Table Data Table width: 630 mm Table length: 950 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,400 x 2,160 x 2,320 mm Overall weight: 5,440 kg EDM hours: 11,537 h Power-on hours: 29,381 h Type of mains supply: 3-phase current EQUIPMENT Manual central lubrication for CUT E series Heat exchanger kit Large wire spool accommodation 25 kg, CUT E series Wire chopper for CUT E series Dodpfx Asx I Akusfxocl Signal lamp Note: Dismantling and loading can be carried out by the seller at an additional cost.

Condition: used, machine/vehicle number: 246292, Eckenrundstossmaschine - Corner Rounding Machine Polygraph Y6RSerial-No. 246292 Gerdes Messer / Straight Knife Stapelhöhe max. 55mm Hub 65mm Handhebel / Table model Manual Operation Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Djdpsh Axdwofx Afxscl