Used Corner Cutting Machine for sale (68,258)

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, machine/vehicle number: 22076049, wire diameter (max.): 9 mm, power: 18 kW (24.47 HP), spring diameter: 120 mm, wire diameter (min.): 2 mm, production capacity: 5,400 unit/h, The machine was equipped with a new control system in the year 2000! A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of right-hand and left-hand coiled compression and tension springs, as well as leg springs. The springs can be produced with any desired pitch and spring body shape. TECHNICAL DETAILS Wire diameter max.: 9 mm Wire diameter min.: 2 mm Production capacity max.: 90 pieces/min Outer spring diameter: 10 - 120 mm Wire feed speed: 27 - 80 m/min Wire feed length: unlimited Two-finger system Wire thickness: 2 - 9 mm Outer spring diameter: 10 - 120 mm Single-finger system Wire thickness: 3 - 7 mm Outer spring diameter max.: 60 mm MACHINE DETAILS Operating voltage: 380 V / 50 Hz Control voltage: 220 V Total power requirement: 18 kW Dimensions & Weight Godpfx Aszb Dapekysiu Machine dimensions (L x W x H): 3,300 x 1,500 x 1,450 mm Lubrication system dimensions (L x W x H): 830 x 650 x 1,000 mm Control cabinet dimensions (L x W x H): 700 x 1,500 x 1,750 mm Machine weight: approx. 5 t EQUIPMENT 5x feed rollers, wire holder 3 mm, two-finger Spring length measuring device (Model: LION PRECISION-PANTHER) Wire coil holder POST, motor-driven, mandrel holder (diameter: 1,400 mm) Lubrication system Control cabinet cooler RITA Hydraulic unit

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: W261, repeat accuracy: 0.05 mm, workpiece weight (max.): 6,300 kg, working length: 4,000 mm, working width: 2,250 mm, working height: 230 mm, No minimum price – guaranteed sale to the highest bidder! The machine’s last inspection was carried out by a specialist company at the end of 2025! The machine can be inspected while powered on. TECHNICAL DETAILS Working area X: 4,000 mm Working area Y: 2,250 mm Working area Z: 230 mm Working area for round part machining, diameter max.: 440 mm Working area for round part machining, length max.: 3,700 mm Number of cutting heads: 1 to 4 Cutting carriage distance: max. 1,150 mm Positioning speed, axis-parallel X, Y max.: 60 m/min Positioning speed, simultaneous max.: 84 m/min Cutting speed max.: 50 m/min Travel speed min.: 0.001 m/min Machine tolerance according to VDI/DGQ 3441: ± 0.1 mm/axis Repeatability: ± 0.05 mm/axis Load capacity of the frame max.: 7,000 kg Load capacity per grating bar: 110 kg Number of grating bars max.: 70 Workpiece weight, flat part max.: 6,300 kg Workpiece weight, round part max.: 500 kg MACHINE DETAILS Waterjet source: Bypump 50 APC Operating pressure: max. 3,800 bar Flow rate: 0 to 5 l/min Nozzle size in single-head operation: max. Ø 0.4 mm Nozzle size in dual-head operation: max. Ø 0.3 mm Nozzle size in dual-head operation: recommended Ø 0.28 mm Gedezcwupepfx Akysiu Dimensions & Weight Machine dimensions (L x W x H): approx. 9,000 mm x 7,550 mm x 2,050 mm Weight: approx. 10,000 kg Operating Hours Operating hours: approx. 41,130 h Cutting hours Head 1 / Head 2: 13,720 h / 956 h EQUIPMENT CNC rotary axis Motorized cutting carriage distance adjustment Four-jaw chuck Abrasive hopper Spare parts PC with pre-installed programming software Note: The second head has been removed, and the cutting mechanism has been mounted on Head 1 as a spare part. However, after acquiring a new cutting head, the system can operate with two abrasive tools. The drilling spindle is seized. The crane and lifting device are not included in the scope of sale.

Condition: new, Year of construction: 2025, Entry-level sheet fiber laser metal cutting machine Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 3000*1524mm Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Cutting Speed: 0-100m/min Gjdshwrgtspfx Akysiu Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, laser type: fiber laser, laser source manufacturer: Bodor, laser power: 12,000 W, warranty duration: 60 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Gedpjhwhf Ajfx Akyjiu Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, Laser power: 6000W/12000W/20000W Applicable Material: metal Gsdpfx Aog Tu N Askyeiu Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 200m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cooling Mode: WATER COOLING Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Weight (KG): 11000KG Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1. Flagship Series Super dynamic responding, easily handle complex patterns of sheets. 2. Automatic Edge-finding With the capability of identifying irregular sheets, the edge searching time is decreased to 3 seconds. 3. Automated Nozzle Changer The machine changes its nozzle within 35 seconds at the fastest speed - this saves 50% of time costs.

Condition: new, Year of construction: 2022, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Godpfx Akshwhfqoyoiu Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, Entry-level sheet fiber laser metal cutting machine Giedjhv Hkaspfx Akyeu Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 0-40000mm/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cutting Thickness: 0-30mm CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: excellent (used), Year of construction: 1991, Ref:11067 . 1991 Wohlenberg 115 MCS-3 TV Guillotine. Last supplied fully overhauled 2011. Microcomputer programming with static back gauge - 1024 Data-blocks, 1-99 programmes with LED display. Semi or fully automatic cutting Side air tables L & R Central air table Cutting area illumination Variable pressure hydraulic clamp 2 x HSS knives Safety knife change device - machine assisted Overload device with safety bolt FFM guarding to U.K. HSE specifications Including tools, spares & manuals. Accessories: 2000 Polar LW 1000-4 pile lift 2000 Polar RA4 jogger with air removing roller. Specification: Gisdpfjydnw Dsx Akysu Cutting width, Max: 115 cm Clamp opening, Max: 14.5 cm Depth of rear table, Max: 115 cm Cuts per minute, Max: 40 Clamp pressure : 2.5 - 40 kN Power requirement : 3 kW

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 6,000 h, control type: CNC control, degree of automation: automatic, controller manufacturer: Fanuc, laser type: CO₂ laser, laser source manufacturer: Fanuc, laser hours: 6,000 h, laser power: 2,500 W, sheet thickness steel (max.): 16 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 6 mm, LVD LASER ORION 3015 PLUS - 2.5kW Year of manufacture 2013 Giedpfoy Av Nmjx Akyeu

Condition: good (used), Year of construction: 2021, total width: 500 mm, total length: 800 mm, total height: 500 mm, overall weight: 65 kg, sheet thickness (max.): 40 mm, operating speed: 2,600 mm/s, Cutting machine CEVISA - CHP-12 MACH-ID 9406 Make: CEVISA Type: CHP-12 Year: 2021 Max. nominal thickness 40 mm Max. recommended thickness 20 mm Max. bevel length in several runs 18 mm Max. bevel length in single run 12 mm MIn. bevel inner diameter 100 mm   X Bevel K Bevel V Bevel Y Bevel High average cutters lifespan around 1000 M Self feed Zero maintenace Giedpfx Akszcng Aoyju Min. Beveling angle: 22.5° Max. beveling angle: 45° Min. plate thickness: 4mm Maximum sheet thickness:40mm Power: 3 HPkW Feed rate: 2600mm/min. Length: 800mm Width: 500mm Height: 500mm Weight: 65kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2013, total width: 500 mm, total length: 800 mm, total height: 500 mm, overall weight: 65 kg, sheet thickness (max.): 40 mm, input voltage: 3,000 V, operating speed: 2,600 mm/s, Cutting machine CEVISA - CHP 12 MACH-ID 9404 Make: CEVISA Type: CHP 12 Year: 2013 Max. nominal thickness 40 mm Max. recommended thickness 20 mm Max. bevel length in several runs 18 mm Gisdpfx Aszcngcekyeu Max. bevel length in single run 12 mm MIn. bevel inner diameter 100 mm   X Bevel K Bevel V Bevel Y Bevel High average cutters lifespan around 1000 M Self feed Zero maintenace   Min. Beveling angle: 22.5° Max. beveling angle: 45° Min. plate thickness: 4mm Maximum sheet thickness:40mm Power: 3 HPkW Feed rate: 2600mm/min. Length: 800mm Width: 500mm Height: 500mm Weight: 65kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, In this offer you purchase a used cutting system "Fotoba FHS42 PW" Object of sale: 1 x Fotoba FHS42 PW suitable for: HP Pagewide Pro XL 10000 HP Pagewide XL 8000 Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Gisdjqmm D Sopfx Akyju Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2018, laser power: 8,000 W, Manufacturer: TRUMPF Type: TruLaser 3060 fiber (L66) Year of manufacture: 2018 Working area 6000 x 2500 x 115 mm Laser power: 8000 watts Control: Siemens Sinumerik 840D SL Standard equipment Machine ⦁ Working area 6000 x 2500 mm ⦁ Closed machine frame Gijdpfowl I Tvox Akysu ⦁ Integrated cabinet with roller shutter ⦁ Automatic pallet changer in longitudinal direction ⦁ Gantry drive combined with linear direct drives ⦁ Closed beam guidance via laser light cable (LLK) ⦁ Cooling unit ⦁ Integrated control cabinets ⦁ Longitudinal conveyor belt ⦁ Work area lighting ⦁ Positioning laser diode ⦁ Spraying system ⦁ PierceLine ⦁ FocusLine ⦁ NitroLine ⦁ PlasmaLine ⦁ Automatic nozzle cleaning Extended features: ⦁ External TruDisk 8001 solid-state laser with 1 LLK output (includes BrightLine fiber and Fusion Cut Performance Package) ⦁ DetectLine ⦁ Drop & Cut ⦁ Advanced Condition Guide sensors ⦁ Cameras 1+2 ⦁ Cross conveyor ⦁ Wireless Operation Point ⦁ Dust protection for device plate ⦁ High-speed cutting package ⦁ Copper cutting package - O2 and N2 cutting data ⦁ Brass cutting package - N2 cutting data ⦁ Smart Collision Prevention (only in conjunction with TruTops Laser or TruTops Boost)

Condition: good (used), Year of construction: 2002, Ref. -No.: 10442 Manufacturer: LIEBHERR Type: LC 122 Year of construction: 2002 Type of control: CNC-Steuerung Control: LIEBHERR PC NC Storage location: Halberstadt Country of origin: Germany Hob diameter max.: 90 mm Table Diameter: 145 mm Max. Module: 3 mm Smallest number of millable teeth: 4 Milling head swivel angle: +/- 45 ° Resolution accuracy: 0,1 Degree Workpiece table load: 17 kN Milling speed: 450 - 4.500 1 / min Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 55 A Giedpfeym Nbcjx Akyju Fuse in the supply line: 63 A Max. milling diameter spur gears/helical gears: 125 mm Max. milling width spur gears/helical gears: 250 (axial) mm Spindle stroke: 180 mm Max. cutter width: 200 mm Further information: Ambient temperature: +12°.....+40° Operating noise: 78 dB (A) Milling head designation: motor milling head Workpiece axis: vertical Stand: movable Table: fixed Milling method: axial hobbing in the same or opposite direction The machine can be inspected under power by arrangement.

Condition: excellent (used), Year of construction: 2009, Beam on time: approx. 17,600 hours Giodpfx Akszcvx Tsyju Laser on time: approx. 45,500 hours Includes Loadmaster.

Condition: good (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 8070850, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: IPG Photonics GmbH, laser power: 4,000 W, laser wavelength: 1,070 nm, sheet thickness steel (max.): 5 mm, sheet thickness stainless steel (max.): 4 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness brass (max.): 1 mm, sheet thickness copper (max.): 1 mm, overall weight: 420 kg, total length: 856 mm, total width: 806 mm, total height: 1,186 mm, Equipment: cooling unit, Technical Data Manufacturer: IPG Laser GmbH Laser Model: YLS-4000-S2-IHE Serial Number (SN): 8070850 Rated Voltage: 400V AC +-10% 3P/PE Frequency: 50/60 Hz Full Load Current: 80 A Fuses: 80A / 120kA Date of Manufacture: 08.12.2008 Wiring Diagram: G25-16-70820-4 Cooler Wiring Diagram: G25-16-61012-4 Gijdpfozc Hpvex Akyeu Certification: CE marking Wavelength: 1070 nm Wavelength Bandwidth: approx. 1070 nm – 1080 nm Rated Output Power: 4.0 kW Laser Class: Class 4 Power Control: 10% to 100% Typical Fiber Diameter (Delivery Fiber): Mostly 100 µm (micrometers) Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine Purchase/Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AMONG OTHERS. Gjbn N Ay Dowza Dxogoil Do you need a high-quality, but affordable, metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: new, Year of construction: 2026, Laser power: 12000 Watt Working range laser: 3048 x 1524 x 280 mm simultanious: 150 m / min Max. positioning accuracy X,Y axis: 0,05 mm Max. steel: 30 mm Max. stainless steel: 25 mm Max. aluminium: 25 mm Max. brass: 20 mm Max. copper: 10 mm Max. workpiece weight: 1500 kg Length: 8960 mm Width: 2720 mm Height: 2400 mm Gedpfxjyz Iu Sj Akyoiu Machine weight: 5900 kg Electrical connected load: 62 kW

Condition: new, Year of construction: 2025, Laser power: 12000 Watt Working range laser: 3048 x 1524 x 280 mm simultanious: 150 m / min Max. positioning accuracy X,Y axis: 0,05 mm Max. steel: 30 mm Max. stainless steel: 25 mm Max. aluminium: 25 mm Max. brass: 20 mm Max. copper: 10 mm Max. workpiece weight: 1500 kg Length: 9500 mm Giodov U A I Ispfx Akysu Width: 4200 mm Height: 2600 mm Machine weight: 5300 kg Electrical connected load: 60 kW

Condition: new, Year of construction: 2026, Laser power: 12000 Watt Working range laser: 3048 x 1524 x 280 mm simultanious: 150 m / min Max. positioning accuracy X,Y axis: 0,05 mm Max. steel: 30 mm Max. stainless steel: 25 mm Gijdpfx Aozcum Nekysu Max. aluminium: 25 mm Max. brass: 20 mm Max. copper: 10 mm Max. workpiece weight: 1000 kg Length: 8960 mm Width: 2720 mm Height: 2400 mm Machine weight: 5900 kg Electrical connected load: 36 kW

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 7411231, Size 92 cm, Program, Spare knife, big side tables Gisdpfx Akswnqwcjysu Machine no: 7411231

Condition: excellent (used), Year of construction: 1982, Format (cm): 137 Equipment / Additional information: Gisdpfozcpm Rox Akyou Side tables, safety barrier, air table, 1xreserve knife Condition: Very good condition // The saddle motor works, but will need to be overhauled eventually.

Condition: used, Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: Gsdpfx Akou Tg Speysiu 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Condition: good (used), functionality: fully functional, Year of construction: 2005, control type: CNC control, laser power: 4,400 W, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 12 mm, with ByLaser 4400 with turning axis ByVision cnc control with changing table Technische Daten / technical details: Blech-Nennmass X, Y / sheet nominal size X, Y 3000, 1500 mm Schneidbereich X, Y / cutting range X, Y 3048, 1524 mm Hub Schneidkopf Z / stroke cutting head Z 170 mm Drehachse: / turning axis: Profilaufnahme Spannfutter / profile taper clamping chuck 15-315 mm Profilzuführung durch das Spannfutter / profile feed through the clamping chuck 15-155 mm max. Profilbearbeitungslänge / max. profile working length 2700 mm Laserleistung / laser capacity 4,4 kW Materialdicke Stahl / thickness of the material steel 25 mm Materialdicke Edelstahl / thickness of the stainless steel 20 Mm Materialdicke Alu / thickness of the material Aluminium 12 mm Godpfx Akjy N Rgmsyjiu Gewicht ca. / weight ca. 13500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Ideal 5222 Digicut Hydraulic Guillotine The machine is 100% functional and has been serviced. This model has the most extensive equipment. The machine was purchased from a government office. Technical specifications: Working width: 520mm Stack height: 80mm Minimum remnant: 22mm Giedpfx Akjzdax Heyeu Maximum distance from the saddle to the knife: 520mm 230V power supply Key features: The machine has a full EP programmer with the ability to save individual steps to memory. Hydraulic pressure beam drive, fully adjustable pressure from 200-1100N Electromechanical knife and saddle drive Automatic pressure synchronized with the knife’s cutting movement Electronically controlled saddle adjustment knob with adjustable speed Side tables Photocells „SCS” safety system, including: Electronically controlled two-handed cutting start Automatic knife return from any position Transparent cover on the rear table Laser cutting indicator Additional equipment includes: spare knife, cutting sticks, tool kit, paper stack tapping device, safe knife change device, and documentation.

Condition: good (used), Ideal 4705 Paper Cutting Guillotine This is a currently manufactured guillotine model from the renowned German manufacturer Ideal. Gisdpfszdaxajx Akyou Very good condition, ready for production. Description: – Cutting length: 475 mm, – Cutting thickness: 70 mm, – Minimum scrap: 30 mm, – Maximum distance from the knife to the saddle: 455 mm. Safety Cutting System includes: a lifting, transparent safety cover (blocks cutting when the knife cover is open); a safety lock (blocks the knife lever in the upper position); safe cutting depth adjustment (from the outside of the machine); cutting blades can be easily and safely rotated and replaced; a knife made of high-quality „Solingen” steel; a sturdy steel knife carrier; a sturdy pressure plate lowered by a wheel (full control of the pressure force adjustment depending on the type of paper being cut); a rear stop adjusted by a crank; a measuring tape in millimeters and inches; Solid metal construction; The set includes a table for the machine, a spare cutting stick, an instruction manual, and a spare knife.