Used Count Numbering Machine for sale (83,804)

Condition: excellent (used), Dahlih MCV 1020 Vertical Machining Centre Specification Table Working surface 1250 x 660mm T slot (size x number) 18 x 5mm Max Table load 1000kgs Travel X Travel 1020mm Y Travel 550mm Z Travel 560mm Distance of spindle end to table top 150- 710mm Distance of spindle centre to column surgface 600mm Spindle Spindle Nose NT40 Spindle speed 8000/10000 RPM - TBC Feed Cutting Feed 1-10000 mm/min Rapid travel 20000 mm/min Min. Input Increment 0.001 Iiodpfx Apsz R A Uns Doh ATC Toolholder BT40 Dimensions - 4500 x 3640mm Weight 6000kgs

Condition: used, Counter bearing and adapter for milling machine for horizontal milling Counter bearing and adapter (counterholder) for DECKEL milling machine (Bearing block with dovetail mounting adapter DECKEL FP1 + FP2) Type 9570 Dovetail width, narrow: approx. 72 mm Dovetail width, wide: approx. 88 mm Dovetail height: approx. 15 mm Length (bearing block): 133 mm Width (bearing block): 50 mm Total height (bearing block): 105 mm Bearing bore: Ø 17 mm (with bronze bearing bushing) Distance from bore axis to dovetail mounting face: approx. 82.5 mm (center height) - Adapter fits dovetail and mounting surface, raises center height by 22.5 mm to 105 mm Total length (dovetail rail): 635 mm Weight: 3.8 kg Iodpfx Apexcbl Ds Deih Very good condition

Condition: ready for operation (used), Year of construction: 2004, operating hours: 17,500 h, functionality: fully functional, travel distance X-axis: 830 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain 530 (MC422), rotational speed (max.): 12,000 rpm, The machine is in very good condition, runs quietly, and operates with precision. TECHNICAL DETAILS Travel X-axis: 830 mm Travel Y-axis: 630 mm Travel Z-axis: 630 mm Feed rates: 15,000 mm/min Rapid traverse: 30,000 m/min Motor spindle: 12,000 rpm Number of tool stations: 32 MACHINE DETAILS Control: Heidenhain 530 (MC422) Tool holder: SK 40 Weight: approx. 9,000 kg Spindle hours: approx. 17,500 EQUIPMENT Internal coolant supply (IKZ) Chip conveyor Electronic handwheel Isdpfx Ajz N Adgop Djih Blum laser Flushing unit Filtration system Note: The probing system is not included in the scope of delivery.

Condition: used, machine/vehicle number: 007649, Max working width: 600 mm Gluing System: EVA Hotmelt Iiedju Eviqepfx Ap Doh

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 28,000 h, controller model: Siemens Sinumerik 840 D SL, laser power: 5,000 W, sheet thickness steel (max.): 25 mm, working length: 4,000 mm, working width: 2,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Resonator power: 5 kW Working area (L × W): 4,000 × 2,000 mm Sheet metal thickness, steel: max. 25 mm Sheet metal thickness, stainless steel: max. 20 mm Sheet metal thickness, aluminum: max. 20 mm Speed: max. 235 m/min Accuracy: 0.001 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D SL Dimensions & Weight Dimensions (L x W x H): 12,000 x 5,300 x 2,200 mm Machine weight: 13,000 kg Operating hours: 28,000 h EQUIPMENT LiftMaster Power supply for TruDisk via the machine Work area lighting Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning TRUMPF laser Solid-state laser TruDisk 5001 with one LLK outlet Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Laser logbook function Cutting head Universal cutting unit with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet metal edge detection 17-inch touch color display Simple workshop programming Advanced workshop programming Fast reproduction Integrated technology data Automatic shutdown FastLine FlyLine AdjustLine Remote service via internet USB interface Iijdpfx Aez Npdgep Djh RJ-45 network connection CE marking Light barriers Multi-camera base system Compact dust extraction system Machine enclosure with certified viewing window, door on the right Electric roll-up roof Retrofitting capability for max. 2 additional LLK outlets

Condition: used, Year of construction: 2021, turning diameter over bed 0800 mm Iiodpfxey Nd Sis Ap Deh turning diameter over slide rest 500 mm turning length 4000 mm spindle bore 105 mm spindle turning speed range 5,4 - 720 U/min workpiece weight 2500 kg bed width 600 mm spindle bore 105 mm longitudinal feeds: 0,05- 24,3 mm/U cross feed 0,05 - 12,15 mm/U rapid traverse 4 m/min main drive 11 kW total power requirement 14 kW weight of the machine ca. 8 t dimensions of the machine ca. 6,5 x 2,5 x 2 m With 4 position tool holder, face plate with safety cover, steady rest and DRO.

Condition: good (used), Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine -Counter bearing: for milling machine Isdsxfhygjpfx Ap Dsih -Bore: Ø 48 mm / height 150 mm -Dovetail: 140 to 115 mm 22 mm high -Dimensions: see technical drawing in the photos -Dimensions: 215/80/H210 mm -Weight: 6.8 kg

Condition: good (used), Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine -Counter bearing: for milling machine -Bore: Ø 40 mm / height 108 mm -Dovetail: 79 to 59 mm 15 mm high -Dimensions: see technical drawing in the photos -Dimensions: 140/73/H155 mm -Weight: 3.6 kg Iijdpfsxfhytox Ap Doh

Condition: excellent (used), Year of construction: 2003, Hettich Blue Max hinge drilling machine, type: Blue Max 19 - FS Number of spindles per row of holes: 11 Number of horizontal spindles: 5 Pot-joint drilling head: yes Drill spacing: 32 mm Clamping device: yes / pneumatic Iodpfxjzhx D Us Ap Dsih Power consumption: 2.2 kW Stop rulers Accessories: many drill bits (see photos) Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1997, Manufacturer: MABO Model: BABY S.A.S. BABY 80 Machine type: Edge sanding machine Technical Data Distance between rollers: 1,050 mm Max. sanding belt width: 120 mm Number of speed settings: 1 Main motor: 1.1 kW Sanding belt horizontal Sanding belt tiltable Iedpfx Apoxgvcxo Doih Vertical upwards Weight approx.: 95 kg Space requirement length: 2.65 m Space requirement width: 0.55 m Space requirement height: 1.1 m Location: from stock 54634 Bitburg - Immediately available -

Condition: good (used), functionality: fully functional, Year of construction: 2018, control type: CNC control, controller model: Siemens Sinumerik 840D, laser type: fiber laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 14 mm, sheet thickness aluminum (max.): 12 mm, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,530 mm, travel distance Z-axis: 160 mm, Equipment: documentation/manual, Machine DURMA HD-FL 3015 III – 4 kW Iiedpeynbbqofx Ap Djh Year of manufacture: End of 2018 (as new) — Technical Data • Working area (X-Y-Z): 3060 × 1530 × 160 mm • Max. sheet size: 3048 × 1524 mm • Max. sheet weight: 200 kg/m² Maximum sheet thicknesses: • Mild steel: 20 mm • Stainless steel: 14 mm • Aluminium (AlMg3): 12 mm Dynamics & Precision: • Travel speed X-Y: 200 m/min • Synchronisation speed: 280 m/min • Acceleration: 20 m/s² • Positioning accuracy: ± 0.02 mm • Repeatability: ± 0.1 mm — Standard Equipment • CE-compliant version with shuttle table & light curtain safety system • Siemens SINUMERIK 840D CNC control • Precitec ProCutter cutting head F150 (auto-focus) • Automatic pallet changer system • Automatic sheet inspection (position & size) • Positioning laser diode • Automatic nozzle cleaning • Central lubrication system • Chip conveyor • User interface (power / speed / pressure) • External Metalix CAD/CAM software with autonesting • Illuminated working area • Multi-chamber extraction system • Warning beacon — Special Accessories • IPG 4000 W fiber laser source incl. chiller & compact extraction unit • Motorized chip conveyor • Linear drives for X1, X2, Y axes • Laser service kit • Automatic nozzle changer • Additional Metalix license — Special Arrangements • Roller container for slag & small parts (operator side) • Laser source, chiller & extraction system mounted above the machine • Machine frame to be manufactured by the customer

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller manufacturer: OKUMA, controller model: OSP P200M, total height: 2,950 mm, total length: 2,900 mm, total width: 2,600 mm, rotary table diameter: 400 mm, rotational speed (min.): 25 rpm, rotational speed (max.): 15,000 rpm, overall weight: 8,000 kg, operating hours of spindle: 18,500 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, OKUMA MU-400V with OKUMA OSP P200M CNC Control 5-axis CNC machining center Spindle drive 50-15,000 rpm (ISO40/BIGPLUS) 22 kW / 198 Nm Tool changer SK40 according to DIN 69871 (BT40) Tool changer with 32 magazine positions Electronically controlled spindle head flushing system Thermal compensation and machine body ventilation system for compensation or reduction of thermal errors (TAS-S and TAS-C) Coolant supply through the spindle 15 bar / 20 l/min Iiedpfx Apsyq Sl Eo Doh Double screw chip conveyor for chip removal from the working area Synchronous tapping and thread milling Removable electronic handwheel 100 workpiece zero points 200 tool length and 200 tool radius offsets LCD color display OKUMA I-MAP auxiliary dialog 2 USB 2.0 ports Ethernet interface with browser and DNC-T1 for program transfer Work area shower cooling system Hinged belt chip conveyor, discharge height 1000 mm Tool breakage monitoring and tool length measurement

Condition: good (used), Year of construction: 2016, Manufacturer: Baader Model: 604-530 Year: 2016 Condition: Used Serial number: 120002207 Stock number: 3450 Drum: 10 mm Infeed height: 2400 mm Outfeed height: 900 mm Power: 3 x 400V, 50Hz, 9.3kW Dimensions: 1600 x 1650 x 2900 mm Weight: 1700 kg Iisdpfx Asz R Niaep Djh Machine has only 1348 operating hours. Infeed hopper with mixing arm, touch screen control. Includes drum trolley, extra 10 mm drum, extra knife, and extra squeezing belt.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, OMN RV-500 Includes cooling system, dressing unit, and magnet. Isdpfx Apjz R Rpne Djih

Condition: used, Zwick   Type: BZ1.0 / TH1S   Zwick table-top testing machine   Zwick with a maximum force of 1.0 kN.   Crosshead travel: 1150 mm. Testing speed: 0.1 ... 1800 mm/min   Scope of supply: (See images)   Iodpszdryzsfx Ap Deih (Changes and errors in the technical data are subject to change!)   We would be happy to answer any further questions you may have by phone.

Condition: used, total height: 3,200 mm, total width: 3,200 mm, total length: 8,000 mm, Year of manufacture: 1996 Empty weight: 26.000 kg Price: On request Bed Milling machine Bed Miller Model: CNC Manufacturer: Anayak Type: FBZ-HV-4000 CNC: Heidenhain Year: 1996 Bed-dimensions: 4500x800mm X-travel: 4000mm Y-travel: 935mm Z-travel: 1000mm Rotatable Fräsekopf Spindle-speed: 3000rpm Spindle-take: ISO 50 Incl. peripherals and documents Dismantled for transport Video available! Iiodoz R N Ddspfx Ap Dsh Machine-dimensions: 8000x3200x3000mm Machine-weight: 26000kg - Year: 1996 - Documentation available: Yes - CE marking present: Yes - Serial number: 11676-FBZ - Drive system: CNC - Control system brand: Heidenhain - Number of axes [pcs]: 3 - X-axis travel [mm]: 4000 - Y-axis travel [mm]: 935 - Z-axis travel [mm]: 1000 - Table length [mm]: 4500 - Table width [mm]: 800 - Tool holder: ISO50 - Max. spindle speed [rpm]: 3000 - Transport dimensions: 8000mm x 3200mm x 3200mm (l x w x h) - Transport weight [kg]: 26000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, SincoTec Type: POWER SWING 20 kN POWER SWING 20 kN resonance testing system Sincotec Power Swing 20 kN resonance testing system Manufacturer's maintenance performed General information For sale is a used Power Swing 20 kN resonance testing system from Sincotec Test Systems GmbH. The testing system was used in a single-shift operation, and all maintenance work was performed regularly by the manufacturer. Special features: Robust construction for continuous operation Precise resonance testing up to 20 kN Manufacturer's maintenance available Ideal for research, testing, and development applications Technical data – Testing system Feature / Value Overall height of testing system 1215 mm (without clamping device) Width of testing system 2005 mm Depth of testing system 1205 mm Maximum force amplitude 10 kN Maximum total force ±20 kN Accuracy of measuring sensors min. Class 1 (according to DIN EN 10002-3) Technical data – Control cabinet Feature / Value Overall height of control cabinet approx. 1800 mm Height of tabletop 1080 mm Width of control cabinet 650 mm (narrow tabletop) / 1450 mm (wide tabletop) Depth of control cabinet 700 mm (narrow tabletop) / 800 mm (wide tabletop) Weight 152 kg (small tabletop) 187 kg (large tabletop) with (granite plate) 247 kg Conditions for the installation site Feature / Value Space requirement 4.3 × 3.0 m Required ceiling height 2.5 m Floor load-bearing capacity 234 N/cm² Mains conditions Feature / Value Voltage 400 V three-phase with neutral conductor and protective earth Phase sequence Right-rotating field Voltage fluctuations ≤ ±10 % Short-time dips < 20 ms Limits for sustained disturbances Radio interference level A according to VDE 0871 Frequency 50 Hz ± 1 % Protective earth / Grounding resistance < 0.3 Ω Connection and protection Feature / Value Voltage supply 400 V / 50 Hz (Right-rotating field) Connection plug CEE socket, 5-pole, 16 A Protection 16 A Weight of testing system approx. 3.6 t Max. weight clamping device 250 kg Condition: used Scope of delivery: (See picture) Iodpfxjzii A Ds Ap Dsih (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Keyence KEYENCE XM-2000 with XM-H1000 – 3D Coordinate Measuring System (CMM) Year of manufacture: 2020 Professional handheld measuring system for precise 3D measurements directly in the production environment. Iiodpfezii Dnex Ap Deh Item description: For sale is a used KEYENCE XM-2000 coordinate measuring system, including the XM-H1000 handheld probe. This innovative system enables precise 3D measurements directly at the workplace – without a measuring room, without complex setup, and without specialized CMM knowledge. The device is ideally suited for manufacturing companies, quality assurance, initial sample inspection reports (ISIR), in-process controls, and reverse engineering. Technical data – KEYENCE XM-C1000 / XM-H1000 (XM series) Measuring system (general) Feature: Measuring range (XYZ) approx. 600 × 300 × 200 mm (depending on the configuration) Measuring accuracy ±(8 + L/80) µm (L = measuring length in mm) Repeatability ±3 µm (typical) Resolution 1 µm Measuring principle - Optical tracking with camera-based detection Calibration - User calibration possible with calibration sphere CAD comparison - Directly on the device (STEP, IGES, etc.) Export formats - PDF, Excel, CSV, DXF Tolerance evaluation - Automatic with color comparison XM-C1000 – Control and evaluation unit (controller) Component: Display - 15-inch touchscreen Connections - USB, LAN, HDMI, power connection Storage options - Internal + USB export Software functions - Measuring, CAD comparison, report generation Operation - Touchscreen + button operation Languages - Multilingual (including German) XM-H1000 – Handheld measuring probe Feature: Probe type - Handheld with push button Feedback - LED status indicator, vibration signal Probe tip - Replaceable, various tips available Tracking - Detected via the controller's camera system System properties Feature: Operating temperature: 10 – 35 °C Voltage supply: 100–240 V AC, 50/60 Hz System size (complete) - approx. 800 × 600 × 800 mm (depending on the configuration) Weight (total system) - approx. 25–40 kg (depending on the configuration) Mounting - On table or optional measuring table Scope of delivery: KEYENCE XM-2000 control and evaluation unit KEYENCE XM-H1000 handheld measuring probe XM-C1000 (controller) Camera unit / tracking module Connection cables and power supplies Condition: Used, fully functional, in very good condition. Shipping & delivery: Shipping by freight forwarder Self-collection possible by arrangement. International shipping possible upon request. If you have any questions, require further information, or would like to arrange a viewing appointment, please do not hesitate to contact us. (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Zwick / Roell Universal testing machine / Material testing machine Zwick / Roell ProLine Z005 Universal Testing Machine 5 kN testing machine for tensile, compression, and material testing For sale is a used universal testing machine from the manufacturer Zwick / Roell. The machine is suitable for tensile tests, compression tests, material testing, component testing, quality assurance, research and development, and laboratory applications. Technical data Manufacturer: Zwick / Roell Type: ProLine Z005 / 5 kN ProLine Type of device: Universal testing machine / Material testing machine Year of manufacture: 2016 Made in Germany Maximum testing force: 5 kN Load cell: Zwick Xforce P Rated force of load cell: 5 kN Start of measurement, accuracy class 1: 20 N Start of measurement, accuracy class 0.5: 100 N Nominal measuring range: 0.06 mm Machine dimensions: approx. 917 x 439 x 1331 mm (W x D x H) Frame width: approx. 720 mm Installation width of frame: approx. 770 mm Testing space width: approx. 440 mm Machine weight: approx. 200 kg Weight of load cell: approx. 0.65 kg Mains connection: 230 V Frequency: 50 / 60 Hz Current consumption: 3.5 A Connection: 1L / PE / N Measuring module: DCSC Measuring range: 0.2 % to 165 % of the nominal measuring value Measurement value acquisition rate: max. 10 kHz Measuring input: Differential input Sensor supply: 10 V DC Strain gauge bridge resistance: 175 to 1200 Ω Connection type: 4- and 6-conductor technology Nominal sensitivity: 2 mV/V Connection thread for load cell: M28 x 1.5 Connection bolt: Ø 20 mm Dowel pin: Ø 8 mm Degree of protection of load cell: IP54 Load cell Type: Xforce P Rated force: 5 kN Working force max.: 150 % of Fnom Limit force: 150 % of Fnom Breaking force: 300 % of Fnom Limit transverse force: 100 % of Fnom Component height: 95 mm Installation dimension: approx. 72 mm Installation height: approx. 61 mm Diameter: 54 mm Equipment Iodpfozfy Ivox Ap Deih Zwick / Roell ProLine testing frame Xforce P 5 kN load cell DCSC measuring module Electronic force measurement Machine electronics on the side of the load frame PC system / testing software as shown in the pictures Accessories as shown in the pictures Application areas Tensile testing Compression testing Material testing Material characterization Quality assurance Incoming goods inspection Research and development Laboratory applications Condition Used Optical condition as shown in the pictures Scope of delivery 1x Zwick / Roell ProLine Z005 Universal Testing Machine 1x Xforce P 5 kN Load Cell 1x DCSC Measuring Module PC system / Software as shown in the pictures Accessories as shown in the pictures The table shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Shipping or forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2021, sheet width 1550 mm plate thickness 6.5 mm pre-bending 4.5 mm diameter of upper rolls 150 mm side roll diameter 130 mm diameter of lower rolls 150 mm distance max. OW zu UW 20.0 mm voltage 400 V total power requirement 1.1 + 2.2 kW weight of the machine ca. 2370 kg range L-W-H 3300 x 1150 x 1110 mm Iijdpfoz St Rvsx Ap Deh Rarely used, according to the previous owner Current new price approx. 25.000 euros Special price upon request (!) Features: - Electro-hydraulic 4-roll plate bending machine * ??Equipped with a driven top roll and bottom roll * Sturdy welded construction - Application range: * Light to heavy-duty sheet metal processing (steel/aluminum/stainless steel) - Electro-hydraulic adjustment of the bottom and side rolls - Linear guidance for the side rolls - Top roll driven by a robust electric motor and planetary gearbox - Mobile, separate control console - Hardened, crowned rolls (SAE 1050 / CK 45 steel) - Conical bending device - 3-axis digital display for precise roll positioning - Electro-hydraulic drop-end (swing-out bearing) - Operating manual (PDF)

Condition: used, Year of construction: 1998, x-travel 0500 mm y-travel 400 mm z-travel 400 mm table surface area 700 x 500 mm tool taper 40 SK/ISO Iiedszhxi Dspfx Ap Dsh spindle turning speed range 20- 4500 U/min feeds 5000 mm/min spindle motor 12 kW total power requirement 13 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 3 x 2 x 2 m Table could be rotated and swiveled manually with digital readout in C- and B- axe over control panel. Control: Heidenhain TNC 124.

Condition: used, Renishaw Type: Equator 500 Year of manufacture: 2021 Item description: For sale is a Renishaw Equator™ 500, a high-precision, industrial 3D measuring and testing system for in-process and quality control in manufacturing. The Equator 500 is not a conventional coordinate measuring machine, but a comparative measuring system specifically designed for fast, repeatable measurements directly in the production environment. Ideal for serial production, in-process measurements, and automated inspection processes. The device is ideally suited for dimensional, form, and positional tolerance testing of workpieces and can be used to provide feedback to CNC machines. The software starts correctly, system status according to the display: "Started OK" (see photos). Functions & Applications 3D measurement of workpieces Comparative measuring principle (very fast inspection cycles) High repeatability in the µm range Real-time temperature compensation Suitable for shop floor use Automation capable (e.g. robot loading) Ideal for serial, sample, and process control Typical industries: CNC manufacturing Metalworking Automotive / supplier industry Machine and tool building Technical data (manufacturer's data / approximate values) Manufacturer: Renishaw Iiedpfxszix Nmo Ap Dsh Model: Equator™ 500 (H+150) Device type: Comparative 3D measuring system / CMM Measuring range: X / Y: Ø approx. 500 mm Z: approx. 150 mm Measuring principle: Comparative coordinate measuring technology Temperature-compensated measurement Accuracy: Very high repeatability Measuring accuracy in the µm range (application and strategy dependent) Control & Software Controller type: Equator 500 Software version: 2.5.21.1 RRTLOS version: 5.1.12 Operation via PC-based Renishaw software Electrical data Supply voltage: 230 V AC Frequency: 50 / 60 Hz Power consumption: approx. 1 kW Dimensions (approx.) Overall height: approx. 1,900 mm Footprint / diameter: approx. 1,200 mm Weight (approx.) 130 kg Condition: used Scope of delivery: (See image) Renishaw Equator™ 500 measuring system Controller / Industrial PC Monitor Keyboard and mouse Base frame Accessories as shown in the photos (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Zwick Type: HA 50 Dimensions: H 2685 mm x W 1040 mm x D 750 mm Footprint: 1600 cm² Technical data: Fmax: 50 kN Vmax: 1500 mm/s Working area height max. 1370 mm Working area width 565 mm Accessories: Kistler force sensor 50 kN via NI-Labview Hydraulic unit 280 bar Footprint: 415 cm² Clamping device / specimen holder available (Universal flange, high-strength jaws for specimen holder) Computer + testXpert R V6.0.0 software Condition: used Scope of delivery: (See image) Iiodozil Uiopfx Ap Deh Weight approx. 1200 kg without frame, etc. (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: good (used), Year of construction: 1970, center width: 2,350 mm, center height: 2,400 mm, Max. blank / workpiece over bed:2400 Centre height over bed: 1200mm Distance between centers: 2350mm Length of the gap: 400mm Maximum sheet thickness: 6mm Stroke X-Axis: 1200mm Stroke Y-Axis: 300mm Speedrange: 6 - 675Rpm Power: 40kW Stroke pinole quill: 1200mm Length: 4500mm Width: 3200mm Height: 2500mm Ijdoxtaxwopfx Ap Dsih Weight: 10200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, total length: 7,800 mm, total width: 1,700 mm, total height: 1,580 mm, Year of manufacture: 2005 Colour: Green Empty weight: 11.000 kg Price: On request - Year: 2005 - Documentation available: No - CE certificate present: No - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 2 - Max. sheet thickness [mm]: 12 - Max. prebending thickness [mm]: 10 Iiedpfx Apozkkrvo Dsh - Max. working width [mm]: 2500 - Top roll diameter [mm]: 360 - Bottom roll diameter [mm]: 300 - Transport dimensions: 7800mm x 1700mm x 1580mm (l x w x h) - Transport weight [kg]: 11000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum