Used Countersink Grinding Machine for sale (65,337)

Condition: good (used), Studer S30-12 cylindrical grinding machine Hedpfx Afevca Izegjw TECHNICAL DATA Main dimensions Center height: 125 mm Center width: 400 / 700 / 1025 mm Largest longitudinal slide path: 400 / 700 / 1000 mm Longitudinal slide Table speed: 50 - 5000 mm/min Reversing delay: 0-6 s Smallest automatic travel: 1.5 mm Max. stroke: 400 / 700 / 1020 mm Max. Table inclination: 12 / 30 / 78° Cross slide Swivel range: +- 45° Quick adjustment: 40 mm Feed path with handwheel: 20 mm Largest plunge depth: 1.7 mm Sanding headstock Grinding wheel diameter x width x bore: 450 x 80 x 203 mm Speed: 1340 / 1500 1625 / 1800 / 2000 / 2200 rpm Coarse adjustment: 210 mm Workpiece headstock Swivel range: 0 - 90 Speed range: 30 - 675 rpm Mounting cone: Morse 5 Collets: W25 Tailstock Mounting cone: Morse 3 Adjustment travel of the center: 30 mm Total power requirement: 5 / 8.25 kW No liability is assumed for the correctness, completeness and up-to-dateness of the information.

Condition: used, Year of construction: 1992, grinding length 0800 mm grinding width 500 mm workpiece height 400 mm table-size 800 x 400 mm table speeds 1 - 25 m/min cross feed autom. 0 - 60 mm/Hub Hedpfx Afswgnz Asgsw grinding wheel size 400 x 100 x 127 mm grinding spindle speed 1400/2800 U/min total power requirement 10 kW voltage 380 V weight of the machine ca. 6 t Machine has cooling arrangement, auto. vert. feed, dressing arrangement and wheel flanges. Control doesn't work continuesly !!

Condition: good (used), Year of construction: 2006, 1 used surface grinding machine Manufacturer: PROTH Type: PSGS-3060 BH Serial No.: 0G02G-05 Year of manufacture: 2006 Technical data Grinding wheel diameter: approx. 400 mm Magnetic chuck: approx. 600 × 300 mm Hodsz S Ud Depfx Afgsw Control system: PROTH Hydraulic unit: included Equipment Magnetic chuck for clamping ferromagnetic workpieces Hydraulic unit PROTH control system

Condition: good (used), Year of construction: 1997, Ref. -No.: 10619 Manufacturer: KELLENBERGER Type: 600 U Nr. 35 Year of construction: 1997 Type of control: Konventionell Control: n/a Storage location: Halberstadt Hodpfx Ajzc D Dqjfgjw Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0- 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Swiveling grinding wheel head: 360° ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Working speeds continuously adjustable (normal / special): 20-400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Condition: used, Year of construction: 1976, Technical details: grinding length: 600 mm grinding width: 200 mm workpiece height: 400 mm table speed: 2 - 18 m/min magnetic plate size: 600 x 200 mm Hsdpfsu Ngl Djx Afgew Max. Table-movement horizontal: 700 mm Max. Table-movement across: 230 mm table adjustment: Quervorschub: 0,1 - 2 mm/Hub ° table speed: 2 - 18 m/min dimensions of grinding wheel: max. Ø 200 x 20 x Ø 51 mm grinding spindle speed: 2800 U/min feed of spindle: vertical 0,01 total power requirement: 3,0 kW weight of the machine ca.: 1,0 t dimension machine xH: 1,8 x 1,2 x 1,9 m dimension coolant device LxWxH: 0,8 x 0,4 x 0,2 m Currently there is a grinding wheel size Ø 160 x 18mm on the machine. There is a dressing device (without diamond) on the spindle. Magnetic clamping plate progress type FE 200/600; 220V / 110V coolant tank div. foot blocks Toothed rail 1000mm *

Condition: used, Year of construction: 2007, grinding wheel diameter: 900 mm, overall weight: 18,000 kg, space requirement height: 2,600 mm, space requirement length: 4,900 mm, space requirement width: 4,900 mm, Double-Disc Grinding Machine - Vertical Manufacturer: DISKUS Type: DDW900R Year of manufacture: 2007 Control system: Siemens 840D Technical data: - Grinding wheel diameter: 900 mm Hodpfjxq Hkusx Afgew - Workpiece grinding width: 144 – 152 mm - Workpiece grinding dimension: 22 – 25 mm - Max. peripheral speed: 25 m/sec - Motor power: 37 kW - Total power requirement: 75 kW - Approx. weight: 18.0 t - Approx. space requirements: L 4.9 x W 4.9 x H 2.6 m - Speed at 24 m/s: 1,425 rpm The machine was used for the production of connecting rods. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: excellent (used), Year of construction: 1986, Grinding wheel diameter: 610mm Grinding wheel length: 150mm Hodpfx As Af U H Hefgew Min. grinding diameter: 1mm Max. grinding diameter: 60mm

Condition: used, functionality: fully functional, Grinding length approx. 500 mm Grinding width approx. 200 mm Magnet size 450 x 175 mm (SINUS magnet) Speed, continuously variable, up to 30 m/s Machine connection power approx. 3.7 kW Hsdpfxo Agpf Eo Afgew

Condition: good (used), functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Tool grinding machine EWAG WS 11 INCLUDED EQUIPMENT: x1 infeed Z-axis : Infeed operation, metric 4 C x1 Cross feed X-axis 4 Q-M x1 grinding stroke 3H : operation of the grinding stroke either by lever or by hand wheel - ref : 111-2-15167 (WS11) x1 grinding spindle Q 36-12, complete 9 JKP x1 workhead spindle with W25 collet reception x1 foot switch 9 M - operation of infeed Z-axis by foot peadal. Infeed stroke steplessly adjustable x1 ISOMA microscope - optic from the front x1 measuring table for microscope x1 ISOMA microscope - optic from the top x1 SIEGFRIED STTV acoustic touch control (grinding wheel to workpiece) in is case x7 grinding wheel flanges Various CBN grinding wheels Hedez I Tbxspfx Afgew Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine for sharpening tools, milling cutters, taps and drills. Machine similar to brands Blohm, Elb, Ewag, Favretto, Fenix, Ger, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, Walter; also consider cylindrical or surface grinding machines, lathes, machining centres and milling machines.

Condition: used, workpiece diameter 8 - 125 mm grinding depth 100 mm clamping length 50 - 1100 mm spindle speed: 13000 / 22500 / 45000 grinding range 1 - 50 mm centre height 145 mm weight of the machine ca. 0,7 t dimensions of the machine ca. 1,2 x 1,0 x 2,0 m Very nice condition, including exhausting unit. Hsdpfxsz Ic A Sj Afgow

Condition: used, Year of construction: 2001, grinding length 600 mm grinding width 400 mm workpiece height 350 mm table-size 820 x 350 mm dist. center of grinding spindle - table 140-525 mm table movement 660 mm workpiece weight max. 400 kg diameter / bore of grinding wheel 350 x 50 x 76,2 mm table speeds 2-28 m/min power capacity - grinding motor 3,7 kW total power requirement 8 kW weight of the machine ca. 2100 kg dimensions of the machine ca. 4,5 x 3 x 2,4 m Geipel & Hotz FS 60 AC surface grinder, built in 2001, in good condition Hedozi Ey Sopfx Afgew

Condition: excellent (used), Year of construction: 1989, Jung JF 520 Jung JF 520 surface grinding machine, manufactured in 1989 / 2019, mechanically overhauled, very good original condition. Hodpfx Afoz Agz Rogjw The machine comes from the technical department of a renowned German die-casting company. Technical data: Year of manufacture 1989 / 2019 Technical data Clamping area (L x W in mm) 600 x 200 Oversize grinding area (L x W in mm) 600 x 250 Magnet size max. mm 500 x 200 Grinding wheel dimensions max. mm 225 (250) x 25 x 51 Distance table/spindle center mm Max. 400 Table longitudinal feed, oscillating m/min 1 – 20 Creep feed mm/min 0 – 500 Grinding spindle drive, speed rpm 800 – 4200 Power kW (with creep feed) 1.6 – 2.2 Machine weight approx.: 2.0 t Accessories and equipment: Magnet Coolant system Machine feet Grinding wheel About the machine: We offer a Jung JF 520 surface grinding machine, manufactured in 1989 / 2019, in very good condition. The machine is, of course, fully functional and has approximately 250 operating hours since its overhaul. All slides run very smoothly and evenly. Even at high speeds, the Jung runs very quietly. This newer generation of surface grinding machines is very user-friendly, and surfaces with a low Ra value can be produced. Take advantage of the opportunity to inspect this machine on site under power and see for yourself the condition of the machine. Video: Jung JF 520 You can find more surface grinding machines from well-known manufacturers on our website.

Condition: new, Year of construction: 2026, functionality: fully functional, Type FNX 640 NC-T, fully enclosed Magnetic clamping plate/grinding area 600 x 400 mm Spindle speed 3000 rpm, drive power 7.5 kW Operating voltage 400 V / 50 Hz Table axis with V-shaped flat guide and toothed belt drive Y/Z axis with linear guides and ball screw drive Hsdpfx Afjz Hyarsgjw Table load 300 kg Control: FANUC NC-T with Stöckel touch-screen interface Grinding-related equipment: Folding dresser Grinding mist extraction Strip filter system Options: Cycle chaining Profile grinding VPN connection for remote diagnostics/remote maintenance etc. The machine is fully functional and can be inspected at the manufacturer's premises by appointment.

Condition: not inspected (used), Year of construction: 1999, grinding length: 1,730 mm, grinding width: 930 mm, total height: 550 mm, 3 automatic axes spindle speed variator feedrate variators Hodjzl Rxlopfx Afgew grinding wheel 400x60x127mm magnetic chuck weight 6500 kg

Condition: used, KED II HDZ drum sander or belt sander for sanding timber and other materials. Hsdpfx Aeztvzujfgew Technical data: - Sanding belt: 300 x 1,010 mm - Motor: 2.2 kW - Dimensions (L x W x H) approx.: 1,050 x 600 x 1,000 mm

Condition: used, Year of construction: 2006, functionality: fully functional, grinding width: 900 mm, For sale are professional, wide-belt wet grinding machines, BÜTFERING PROFI SPW 409 RTTR (SteelMaster Prima), designed for grinding the surfaces of stainless steel, aluminum, and other metals after laser cutting. The machine is in good technical condition and fully functional, but 2 out of the 4 grinding stations require calibration or repair, as they are currently grinding with insufficient accuracy. Two stations are operating accurately. The machine is connected and ready for inspection and testing. Technical specifications: Manufacturer: BÜTFERING Model: PROFI SPW 409 RTTR / SteelMaster Prima Year of manufacture: 2006 Made in: Germany Number of stations: 4 Power supply: 400 V / 50 Hz Required air pressure: 8 bar Grinding width: 900 mm Equipment: 4 grinding stations Touch screen control panel Wet grinding system Conveyor belt Hedpfozkh Stox Afgsw Adjustable feed rate Industrial cooling system Ideally suited for: Stainless steel products Aluminum products Sheet metal processing companies Metal surface preparation prior to painting Removal of slag after laser or plasma cutting Surface grinding and satin (No. 4) finishing. If you have any further questions, please do not hesitate to ask.

Condition: used, Year of construction: 2001, Cylindrical Grinding Machine Manufacturer: SHIGIYA Model: GPS-30.60 Year of manufacture: 2001 Control system: Fanuc Technical Specifications: - Center height above table: 150 mm - Max. grinding diameter: 300 mm - Center distance: 600 mm - Max. grinding length: 600 mm - Max. workpiece weight: 150 kg - Grinding wheel angle: 0° - Machine dimensions: 3,100 x 2,520 x 2,100 mm In our assessment, the machine is in good used condition and can be inspected while powered on by appointment. The machine was used for grinding eccentric shafts with a Marposs Hsdpfx Afjzp Rzbsgsw measurement control system Accessories, tools shown in the photos, and clamping devices are included in the scope of delivery only if noted in the additional information. We reserve the right to make changes and correct errors in the technical data and specifications, and to sell the item to another party in the meantime!

Condition: used, Year of construction: 1998, Technical details: Hodpeu Ngrqjfx Afgsw height of profile: 180 mm max. dia. of grinding wheel: 200 / Topfscheibe mm grinding wheel hole diameter: k.A. grinding spindle speed: 2800 U/min Table dimensions: LxB: 500 x 160mm mm voltage: 220 / 380 V total power requirement: 3,0 kW weight of the machine ca.: 0,57 t dimension machine approx.LxWxH: 1,28 x 1,0 x 1,75 m Application for face grinding Magnet mount: LxW = 680 x 200mm; tilt approx. 15°; swivel 360° via radial scale magnet: Type S2D; permanent magnet, clamping surface 300 x 150mm. Grinding wheel support: -adjustment vertical = length 180mm manual; swivel = approx. 45° right/left manual. Operation via control panel on machine. Coolant tank with pump and feed *

Condition: used, Year of construction: 2012, grinding diameter 200 mm profile depth 30 mm workpiece length - max. 2790 mm grinding length 2310 mm Maximum pitch of the screw -/+ 50 ° Maximum number of gears 1-999 workpiece weight max. 250 kg z-travel 3000 mm x-travel 185 mm max. dia. of grinding wheel 450-330 mm Grinding wheel thickness (with recess) 20-70 mm roll diameter 120 mm Speed of the grinding wheel spindle 1500 - 6000 U/min Workpiece spindle speed 0 - 600 U/min Speed of the pitch axis 0-4 1/min Speed of the dressing spindle 1500-16000 1/min Hodpfx Afjza Hqzegjw feed speed z-axis 0-10000 mm/min feed speed x-axis 0-10000 mm/min total power requirement 150 kVA control Siemens Sinumerik 840D SL weight of the machine ca. 30 t dimensions of the machine ca. 10,65 x 5,37 x 2,75 m Features/Accessories: - Filtration system: KNOLL VL1500/5000 - many accessories—list to follow - documentation

Condition: used, Used Matra valve grinding machine with double-cone collets as shown, 380 Volt electric motor fully functional. Please do not send email enquiries! If you have any questions, we are happy to assist you by phone. Viewing and collection only possible by prior telephone appointment! Subject to alterations, prior sale, and errors. Hjdpfx Afjz R Nptjgow

Condition: excellent (used), Year of construction: 1997, max. wheel diameter 820 mm gear width 300 mm max. module 8 min. module 0,5 clamping length 865 mm number of teeth 10 - 600 max.helical angle +/- 30 ° turning speeds 1100 - 2150 U/min grinding wheel diameter 280 - 400 mm Hsdpfx Aez Hz Rljfgjw grinding wheel width 84 /104 workpiece weight max. 300 kg weight of the machine ca. 11,5 t dimensions of the machine ca. 6,0 x 4,8 x 2,9 m including Reishauer AF Filter, flanges, wheels,...

Condition: good (used), Code: 0345 Brand: STROMAB Hodpeyxf Ttofx Afgow Model: KGS 650 - CE Standard Automatic knife grinding machine for planer knives, knife blades and straight tools – CE Standard Technical data: Max working length 650 mm Grinding motor power 0,75 Hp External diameter of the grinding wheel 127 mm Grinding wheel feed per stroke 0,01/0,05 mm Carriage feed motor power 0,15 Hp Carriage feed speed 12,5 mt/min Tilting grinding wheel motor unit Base with tool storage shelves Overall dimensions mm 1200 x 500 x 1300 h Weight kg 103

Condition: used, Year of construction: 2004, grinding wheel diameter: 660 mm, overall weight: 15,000 kg, Vertical double-disc grinding machine Manufacturer: JUNKER Model: Saturn Year of manufacture: 2004 Control system: Siemens 840D The machines were used for the production of connecting rods. One machine is suitable for rough grinding, and the other for finish grinding. Technical data: - Grinding wheel diameter: 660 mm - Workpiece width: min. 5 / max. 180 mm - Max. workpiece diameter: 200 mm - Machine weight: approx. 15.0 t - Space requirements: approx. L 3.1 x W 4.0 x H 2.7 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Hjdpfxexq R Haj Afgow Subject to technical changes, errors, and prior sale.

Condition: used, Technical details: grinding diameter: 600 mm Hjdow Rktbepfx Afgsw grinding length: 2600 mm centre height: 180 mm workpiece diameter - max.: 360 mm swing diameter: 600 mm grinding wheel diameter: 600 x 305 x 160 mm total power requirement: 17,6 kW coolant device: 90 l/min work piece spindle speed: 12,5-250 U/min feed continuous: 0,05 - 6,0 mm weight of the machine ca.: 8,2 t dimension machine xH: 6,4 x 2,2 x 1,9 mm Final balance balancing device Tailstock with cylinder error correction Digital display X=0.001 - Z=0.01 Radius device 2-10 mm *

Condition: excellent (used), Grinding wheel width 10 cm Table width 60 cm Table length 120 cm Hodpfx Afswq Edvjgjw Water cooling