Used Horizontal Surface Grinding Machine for sale (67,315)

Condition: excellent (used), PERFECT PFG-70150AHRD Surface Grinding Machine Year 2014 Table size 700 x 1500 mm Maximum longitudinal travel 1650 mm Maximum cross travel 760 mm Maximum distance table surface to spindle centre 600 mm Table speed 5 – 25 m/min Magnetic chuck size 700 x 1500 mm Spindle speed 1450 rpm Spindle motor 7.5 kW (10 HP) Grinding wheel size 355 x 40 x 127 mm Floor space required 4810 x 2550 mm Weight 7800 kg Supplied with: Automatic Downfeed System, 1500 x 700 mm Electromagnetic Chuck, Demagnetising Unit, 2 Axis Digital Readout, Remote Handwheel, Spindle Motor Speed Inverter Control, Automatic Paper Strip Filter & Magnetic Separator, Machine Pads & Levelling Bolts, Low Voltage Work Light. For sale with Jet Machinery Ltd Jet Machinery Stock No: #27039 Machine Serial Number: 1485022 Cost: £49,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Hodjzuxt Aspfx Ak Uonu Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: 1984, Second hand tangential grinding machine Brand: Txurtxil Model: NX Machine serial number: 1984 All automatic movements, including Z axis. Characteristics: Grinding capacity: 600x300mm Magnet table dimensions: 500x200mm Power: Three phase 380V Hnjdsrfwzlopfx Ak Ueu Total power: 7CV

Condition: used, Year of construction: 1990, grinding length 600 mm grinding width 375 mm workpiece height 350-375 mm Hjdpfxoy Tpqre Ak Usnu

Condition: used, Year of construction: 2012, grinding length 1000 mm grinding width 600 mm Hedpoz Icr Tefx Ak Uenu workpiece height 600 mm table surface area 1360 x 590 mm feed x-axis 30 - 30.000 mm/min feed y- axis 1200 mm/min Feed z- axis 1500 mm/min. stroke of the table 1200 mm spindle diameter 60 mm grinding wheel size 400 x 100 x 127 mm spindle speeds (infinitely variable) 1000 - 3500 U/min weight of the machine ca. 6,5 t dimensions of the machine ca. 4,10 x 3,70 x 2,85 m

Condition: new, Year of construction: 2026, functionality: fully functional, grinding length: 1,500 mm, grinding width: 300 mm, total length: 3,000 mm, total width: 1,000 mm, grinding height: 150 mm, grinding wheel diameter: 300 mm, table length: 1,500 mm, table width: 200 mm, overall weight: 2,500 kg, grinding spindle motor power: 11,000 W, grinding spindle speed: 1,450 rpm, grinding wheel speed: 1,450 rpm, Equipment: documentation/manual, The GRAFS GRfix-1500e is a heavy-duty surface grinding machine designed for rough and high-performance grinding of steel plates. Developed and manufactured entirely in Poland, this model combines robust construction, long service life, and user-friendly electronic control. Main features: - Electromagnetic table 300×1500 mm, S-pole, holding force 120 N/cm² - Grinding motor 11 kW, high-quality Polish production - Segmented grinding wheel Ø300 mm, 6 aluminium oxide segments - Laser sensor for automatic workpiece height detection (as an additional option) - PLC control (Mitsubishi) with 7” HMI touchscreen – programmable grinding cycles (rough pass, automatic downfeed 0.001–0.05 mm, spark-out, pause, auto-stop) - Stepper motor feed with encoder for precise vertical adjustment - Mitsubishi inverter – variable carriage speed 1–16 m/min - Remote diagnostic support via Internet (Wi-Fi connection) - External coolant filtration system MS60 with rotary magnetic drum separator, 150 L tank, and 60 L/min pump - LED 24V working light and internal coolant pipe for table flushing - Powder-coated body: RAL7012 (frame) / RAL7021 (carriage) Mechanical design: - Extremely rigid welded steel body (10 mm thick plates, stress-relieved) - Carriage on PWTR precision rollers for smooth and silent motion - Replaceable hardened steel guide strips - Quick manual positioning of the carriage above the workpiece - Fast up/down movement of the spindle motor for easy tool change - Easy mounting system for the grinding wheel – only three bolts - Maximum workpiece height: 150 mm Optional equipment: - Accordion-type bellows covers - Alternative coolant filtration units (magnetic, paper, or combined) Advantages: - Perfect for rough surface grinding of large steel plates - Designed for high efficiency and long-term stability - Fully European components – Mitsubishi Electric control system - CE conformity, electrical inspection and Polish technical documentation (DTR) included Warranty: 12 months Hjdpoxmhyisfx Ak Uenu Technical data summary: Parameter Specification Grinding table: 300 × 1500 mm (electromagnetic, S-pole) Max. workpiece height: 150 mm Grinding wheel: Ø300 mm, 6 segments Spindle motor power: 11 kW Carriage speed: 1–16 m/min Downfeed: Automatic 0.001–0.05 mm Control system: PLC + 7” HMI Mitsubishi Coolant system: MS60 magnetic separator, 150 L tank, 60 L/min pump Weight: ~2800 kg (depending on configuration) Power supply: 400V / 50Hz Made in Poland The GRAFS GRfix-1500e is a professional surface grinder built for intensive, rough grinding applications where high metal removal rate and long-term precision are essential. A reliable, industrial-grade solution for steel fabrication shops, tool manufacturers, and service centers.

Year of construction: 1987, condition: used, grinding length max. 630 mm grinding width max. 200 mm workpiece height . mm x-axis max. 250 mm y-axis max. 710 mm distance spindle center to table max. 500 mm table surface area 0,25 mm table load max. 1,1 t table speed -stepless- 2 - 18 m/min cross feed autom. . dust exhaust 0,25 kW Hnjdpfx Aksgbgaws Uou coolant pump 0,09 kW total power requirement ca. 4,5 kW weight of the machine ca. 1,3 t dimensions of the machine ca. 2400 x 1600 x 1900 mm Adjustments Y axis: 1 scale value = 0.005 mm Z axis: 1 scale value = 0.002 mm Manual adjustment (within the range of 250 mm of the Y axis): 80 mm Speeds: automatic cross feed Adjustment path in Y direction: - intermittent 0.2 - 20 mm per stroke; - continuous: 0 - 4 m/min Grinding wheel Ø max. 200 mm Grinding wheel bore: 51 mm Grinding wheel width: 20 mm Diamond dressing unit Digitaldisplay for 2 advertisement vertical infeed

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 1107, total height: 1,700 mm, total length: 1,000 mm, total width: 900 mm, overall weight: 350 kg, For sale is a compact surface grinding machine from the German manufacturer Degen. Model FSM300E. In very good used condition. The machine has seen little use. A very high-quality and precise machine, ideal for tool or prototype construction. Due to its small footprint, it is also suitable for small workshops. Grinding length: 300mm Cross travel: 170mm Max. distance between magnetic chuck and grinding wheel: 290mm Rapid traverse in height adjustment Hjdpsz E S Hbefx Ak Uenu Magnetic chuck: 300x150mm Space requirement: length 1.0 m x width 0.9 m x height 1.7 m Machine weight: approx. 350kg Includes coolant system, electromagnet, wheel dressing device, and extraction system. The machine runs perfectly and grinds with precision. Can be tested while powered on. Location: 5023 Salzburg.

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, grinding length: 450 mm, grinding width: 200 mm, power: 1.5 kW (2.04 HP), input voltage: 200 V, Equipment: documentation/manual, Manufacturer Mitsui MGG CO.LTD Type: MSG-250M Year of manufacture:1981-10 Maximum grinding width: 200 mm Maximum grinding length: 450 mm Maximum table length movement: 500 mm Maximum table length movement: 250 mm Table movement per handwheel revolution: 6 mm /revolution Grinding spindle speed: spindle: 2900 rpm 50 Hz Standard grinding wheel diameter: 200 mm Grinding wheel width: 25 mm Grinding wheel speed: 2900 rpm 50 Hz Grinding wheel bore diameter: 31.75 mm Electric power: 2 HP 1.5 kW 4P 200V 3 phase Weight, approx. 1050 kg Hedpfx Akswvga Ns Uonu

Condition: excellent (used), Delta TP-1200/500 Hnodpfx Aksz Eza Re Uou

Condition: used, functionality: fully functional, grinding spindle motor power: 4 W, input voltage: 380 V, Universal surface grinding machine with a horizontal grinding spindle and cross table. Designed for precision grinding of flat surfaces using the periphery of the grinding wheel. Suitable for grinding various metal components. Manufacturer: “Krasny Borets”, USSR Hedpfxoz Hi Skj Ak Uenu Model: 3E711V Table size: 630 × 200 mm Grinding wheel: Ø250 × 40 × 76 mm Spindle motor power: 4 kW Power supply: 380 V Complete with hydraulic unit GS-3E711V-1-UHL4

Condition: used, Year of construction: 1991, grinding length: 500 mm, grinding width: 200 mm, Jung JA500-E 1991 Hnsdpfoy Iy Ukex Ak Usu

Condition: good (used), Year of construction: 1989, grinding length: 400 mm, grinding width: 200 mm, Grinding area: 400 x 200 mm Magnetic area: 400 x 175 mm Vertical adjustment: 410 mm Grinding wheel dimensions: 225 x 25 x 50.8 mm Grinding wheel speed: 1420 / 2840 rpm Complete with: - Coolant system - Hydraulic unit Hnodpov Tcy Ujfx Ak Uju - Documentation Country of origin: Germany Motor power: 1.5 kW Machine dimensions (L x W x H): 2200 x 1500 x 2100 mm Machine weight: 1100 kg

Condition: excellent (used), Year of construction: 1978, grinding length 500 mm grinding width 200 mm Hodpfozbczrjx Ak Uenu

Condition: ready for operation (used), functionality: fully functional, ELB SWN 5 VA / Horizontal surface grinding machine -Grinding area X/Y/Z 525x375x255mm -Magnetic table 700x300mm -Table clamping surface 900x250mm -Table longitudinal travel 10 - 625mm -Table load max. 280 Kg -Table feed rate 1 - 30 m/min -Oscillating grinding 3 - 30 m/min -Distance from table to spindle center 525mm -Vertical feed rate 2 - 180 mm/min -Step size adjustable 0.001 - 2mm -Grinding wheel speed 3000 rpm -Coolant system -Machine feet -Documentation -Complete technical data, see photos Dimensions: L x W x H 2.7 x 2.2 x 2 meters / Weight 3500kg Hnsdpez Sr Umefx Ak Usu Errors and omissions excepted.

Condition: good (used), Year of construction: 1988, voltage 380 V connected load 7,5 kVA dimensions 2725 x 1930 x 1773 mm weight of the machine ca. 2500 kg --> Technical data Main data: --> Table surface: 605 x 300 mm --> Table longitudinal movement max. (manual): 750 mm --> Table transverse movement: 340 mm --> Grinding height between table/new grinding wheel min/max: 22.5 / 322.5 mm --> Standard size of magnetic clamping plate: 600 x 300 mm --> Workpiece weight incl. magnet: 420 kg --> X-axis / longitudinal movement: --> T-slots (number x width): 3 x 17 mm --> Table feed, hydraulic: 0.3 - 25 m/min --> Travel per handwheel revolution: 47 mm --> Y-axis / height movement: --> Automatic vertical feed - coarse in 12 steps: 0.001 - 0.03 mm Hnedpfsw Dvkaox Ak Ueu --> Automatic vertical feed - fine in 8 steps: 0.001 - 0.01 mm --> Distance per handwheel revolution (x1/x10): 0.1 / 1.0 mm --> Graduation on handwheel (x1/x10): 0.001 / 0.1 mm --> Trigger strokes: 0 - 5 --> Rapid traverse: 400 mm/min --> Z-axis / transverse movement: --> Automatic transverse feed intermittent: 0.5 - 20 mm --> Automatic transverse feed / rapid traverse continuous: 0.1 - 1.0 m/min --> Distance per handwheel revolution: 5.0 mm --> Scale mark on handwheel: 0.02 mm --> Standard grinding wheel: --> Ø x width: Ø 355x38 (50) mm --> Bore: Ø 127 mm --> Speed: 1500 rpm --> Accessories Various grinding wheels --> Documentation

Condition: excellent (used), Year of construction: 1965, functionality: fully functional, spindle speed (min.): 10,000 rpm, spindle speed (max.): 60,000 rpm, Equipment: rotational speed infinitely variable, Overbeck overhauled in 2015 and equipped with fast frequency spindle SC3060-V1000, frequency converter SD2T 3.8kVA and cooling unit PHK525 HZ, cooling capacity 550W Hnjdpfxeu Aqt Es Ak Usu

Condition: used, Year of construction: 2000, grinding length 600 mm Hnodpfx Akjw Hg Uzo Uou grinding width 300 mm magnetic clamping plate 600x250 mm wheel diameter 220-300 mm weight 2200 kg

Condition: good (used), Year of construction: 1990, Year of manufacture: 1990 Hjdpfx Asi Hn U Uok Uenu Control type: CNC Grinding length: 600 mm Grinding width: 200 mm Workpiece height: 375 mm Table load: 100 kg Grinding wheel dimensions: 250x25x51 mm Operating speed: 1-24 m/min Speed: 4200 rpm Drive motor: 5 kW Total power consumption: 7.5 kW Machine weight: approx. 3.2 t Space requirement: approx. 3.7 x 2.1 x 2.1 m

Condition: good (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: 1054, grinding length: 400 mm, grinding width: 150 mm, Table length: 400mm Table width: 150mm Maximum cutting length: 400mm Hodpfx Akor Eq U Ss Uenu Maximum grinding width: 150mm Maximum workpiece weight: 75kg Distance spindle to table: 400mm Table speed 1-24 m./min. Sharpening stone diameter: 25mm Spindle speed: 900 – 4500 rpm. Year of construction: 1979

Condition: used, Year of construction: 2006, machine/vehicle number: 65126, Grinding area: 630x350 mm, grinding wheel diameter: 350 mm, magnetic clamping plate, size: 600x300 mm, with coolant system, fleece filter system and automatic depth feed. Hedez Nhqxjpfx Ak Uonu

Condition: used, Year of construction: 2017, Hydraulic flat grinding machine, Bernardo BSG 2040 TDC, used 🧰 Product features • Manufacturer: Bernado • Model: BSG 2040 TDC • Condition: Used, see photos • Color: blue-white • Year of manufacture: 06.2017 • Rated load capacity: 3500 kg • Weight: 1650 kg • Voltage: 400V 💰 Price: €5,900,- net, excluding VAT • Quantity discount: available upon request • Private sale: No minimum order quantity • Shipping costs: available throughout Europe upon request • Delivery time: Immediately available • Inspection and collection: possible at any time by appointment We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our general terms and conditions, all prices excluding VAT, ex warehouse.) Hnjdpfx Aszzdf Dsk Uou

Condition: used, Year of construction: 2001, serial number 208892 control Siemens 611 Hnsdpfxszf Nu Ej Ak Ueu weight 6,3 t

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, grinding length: 400 mm, grinding width: 200 mm, grinding height: 300 mm, table load: 150 kg, overall weight: 1,500 kg, rotational speed (max.): 2,800 rpm, Working area Grinding length 400 mm Grinding width 200 mm Grinding height 300 mm Optional grinding height 450 mm Maximum table load 150 kg X-axis – Longitudinal movement Table longitudinal travel 10–420 mm Table speed 0.005–35 m/min Y-axis – Vertical movement Distance from table to spindle center 90–415 mm Optional 90–565 mm Vertical speed 100–2,000 mm/min Z-axis – Lateral movement Maximum lateral travel 200 mm Lateral speed 100–2,000 mm/min Grinding spindle Motor power 2 kW Optional motor power 3.7 kW Hnedpfxjz Sra Ns Ak Uju Grinding spindle speed 2,800 rpm Grinding wheel 225 × 25 × 51 mm Dimensions Length approx. 2,000 mm Width approx. 2,300 mm Height approx. 2,300 mm

Condition: good (used), Year of construction: 2001, functionality: fully functional, grinding length: 450 mm, grinding width: 150 mm, total height: 2,129 mm, total length: 1,940 mm, total width: 1,317 mm, workpiece weight (max.): 120 kg, grinding height: 510 mm, grinding wheel diameter: 205 mm, distance table to spindle center: 510 mm, table length: 510 mm, table load: 120 kg, type of input current: three-phase, table width: 150 mm, overall weight: 1,250 kg, grinding spindle motor power: 1,500 W, travel distance X-axis: 530 mm, travel distance Y-axis: 175 mm, rotational speed (max.): 2,400 rpm, grinding spindle speed: 2,400 rpm, input voltage: 400 V, Equipment: rotational speed infinitely variable, 2001 Okamoto ACC-450DXA Surface Grinder | 450 x 150mm Used 2001 Okamoto ACC-450DXA Hydraulic Surface Grinding Machine for Sale – 450 x 150mm Grinding Capacity – Automatic Grinding Cycle – Spare Grinding Wheels Included Manufacturer: Okamoto Model: ACC-450DXA Machine Type: Hydraulic Surface Grinder Year: 2001 Condition: Working Well Includes: Coolant Equipment Magnetic Chuck Cross Feed Digital Display Vertical Digital Display Wheel Guard Spare Grinding Wheels Machine Description Used 2001 Okamoto ACC-450DXA precision surface grinder available for sale. The Okamoto ACC-450DXA is a compact, high-quality hydraulic surface grinding machine designed for accurate flat and form grinding applications in precision engineering, toolrooms, mould and die shops and general manufacturing environments. The machine provides an approximate 450 x 150mm grindable surface, with 530mm longitudinal table travel and 175mm cross travel, making it particularly suitable for precision grinding of small and medium-sized components. The DXA version features an automatic grinding cycle, combining hydraulic table movement with controlled crossfeed and vertical grinding functions to provide repeatable production grinding while remaining straightforward to set and operate. This machine is supplied with a selection of spare grinding wheels. Main Specifications Manufacturer: Okamoto Model: ACC-450DXA Year: 2001 Machine Type: Precision Hydraulic Surface Grinder / Surface Grinding Machine Grinding Capacity Maximum Grindable Surface: Approx. 450 x 150mm Table Working Area: Approx. 510 x 150mm Longitudinal Travel: Approx. 530mm Cross Travel: Approx. 175mm Distance from Grinding Wheel to Table: Approx. 60–510mm Maximum Table Load: Approx. 120kg The generous longitudinal movement relative to the 450mm grinding length allows the wheel to clear the component during the grinding cycle. Grinding Wheel & Spindle Grinding Wheel Diameter: Approx. 205mm Grinding Wheel Peripheral Speed: Approx. 2,400m/min Grinding Spindle Motor: Approx. 1.5kW The spindle arrangement is designed for precision surface grinding where good finish, flatness and dimensional accuracy are required. Additional Drive Motors Hydraulic Pump Motor: Approx. 0.75kW Crossfeed Motor: Approx. 0.75kW Grinding Head Up/Down Motor: Approx. 0.4kW DXA Automatic Grinding Cycle The ACC-450DXA version is designed to provide an automatic grinding cycle, making it suitable for repetitive precision surface grinding operations. The DX-series design incorporates features aimed at both rough and finish grinding, including: Automatic grinding-cycle capability Hsdpfxez Rqk Ro Ak Ujnu Hydraulic longitudinal table movement Powered crossfeed Powered vertical grinding-head movement Coarse and fine vertical feed Precision feed adjustment Robust saddle-type construction Hand-finished precision guideways Automatic lubrication system These features make the ACC-450DXA suitable for both one-off toolroom work and repetitive component grinding. Approximate Machine Dimensions Overall Length: Approx. 1,940mm Overall Width: Approx. 1,317mm Overall Height: Approx. 2,129mm Machine Weight: Approx. 1,250kg

Condition: ready for operation (used), Year of construction: 2011, DELTA LC 500 – Circular table grinding machine - CE marking - Year of manufacture 2011 - Magnetic table – Rotary table 500 mm - Max. grinding diameter 500 mm - Distance column – grinding spindle axis 315 mm - Grinding height max. magnetic clamping plate – grinding wheel 215 mm - Grinding spindle speed 2840 rpm - Fine adjustment via micrometer 0.01 mm - Coarse adjustment (height adjustment) motorized via keyboard - Spindle motor 3 kW - Dimensions of the grinding wheel 200x80x78 mm - Machine enclosure - Coolant system - Documentation Dimensions: L x W x H 1.3 x 0.8 x 1.8 meters / Weight 800 kg Hsdpfx Akezkvz No Usnu Errors and omissions excepted.