Used Court Technology for sale (24,669)

Condition: new, Year of construction: 2025, 2D/3D laser engravers Nwedpj Sd Ubjfx Am Uoi skyLaser Mark – the 2D (optional 3D) fiber laser engraving/marking laser is the complete solution for your complex laser engraving applications.

Condition: new, Year of construction: 2025, The laser processing center skyCUBE M - the new standard in laser material processing! PFEIFER laser processing center skyCube M Njdpfs Sfanjx Am Uewi Laser machine with 200W CO2 laser available immediately Mclass = machining area X 1250 x Y 650 x Z 300 mm skyCUBE M laser processing center - the new Mclass multifunctional laser engraving machine and laser cutting machine - laser processing simple - high precision - laser engraving, cutting with high speed and quality. Our new and best multifunctional talent not only impresses the most experienced user with its newly thought-out design. This CO2 laser / fiber laser shows its outstanding capabilities as a CO2 or fiber engraving laser as well as a CO2 or fiber cutting laser in all industrial applications. With an optional laser power of up to 1000W (1kW), the CO2 laser device / fiber laser system can also be used extremely flexibly in your production. skyCUBE laser devices meet all the requirements of class 1 according to DIN EN 60825-1 and thus offer you the highest level of safety. Depending on the selected and installed laser power, this CO2 laser / fiber laser is ideally suited for cutting and engraving many materials, such as: various metals, acrylic glass, solid wood, etc. Wood materials, wood composite materials, paper, cardboard, various plastics and Foams, textiles, and much more. The excellent execution of the laser machine 100% produced in Plauen guarantees the laser user from metal construction to the laser source a high level of work accuracy with consistently high quality. With a cutting speed of up to 8000 mm / s and an engraving speed of up to 4000 mm / s, high-quality laser technology produces clean and very sharp cutting edges and precise laser engravings. The ergonomic design with a pull-out work table makes it easier to load the system. A drawer in the lower part of the machine is used to collect the clippings. User-friendly and intuitive - the supplied skyCUBE PC software (ready for Windows®). A simple, practical user interface adapted to the Windows standard lets you work quickly and effectively. The software is characterized by high system stability, professional monitoring with appropriate machine operation and control as well as compatibility with common file formats. The data is output over levels - separately for each level, including the definition of the sequences and the type of processing. The parameters, such as laser power and processing speed, are automatically saved for each level and can thus be reproduced in a material database at any time. The laser projects are transferred to the skyCUBE M laser processing center with a computer connected via LAN / USB interface. From there these can be processed repeatedly without the PC having to be switched on. A modern touch control panel gives you access to all system information and functions. The skyCUBE M laser processing center at a glance: German industrial standard machine steel construction for the safe and vibration-free mounting of the laser components and axis systems, on rollable industrial leveling feet 8 "touchscreen display simply see more, control more, communicate more with the skyCUBE M laser processing center Redundant safety system - class 1 laser Security: Shutter - ᐳ active mechanical beam path closure

Condition: new, Year of construction: 2026, The laser processing center skyCUBE M / P / SL - the new standard in laser material processing! (* Prices depending on equipment, this is a brand new laser machine from our production) Nedpfx Amsbnphvs Ujwi Laser options according to your needs: CO2 laser 150W / 250W / 400W or fiber laser 1500 - 6000W PFEIFER laser processing center skyCUBE Processing areas: Mclass = X 1250 x Y 650 x Z 100mm Pclass = X 1250 x Y 1250 x Z 100 mm SLclass = X 1250 x Y 2550 x Z 100 mm skyCUBE laser processing center - the new multifunction laser engraving machine and laser cutting machine - laser processing easy - high precision - laser engraving, cutting with high speed and quality. Our new and best multifunctional talent not only impresses the most experienced user with its newly thought-out construction. This CO2 laser / fiber laser shows its outstanding capabilities as a CO2 or fiber engraving laser as well as a CO2 or fiber cutting laser in all industrial applications. With an optional laser power of up to 1500W (1.5kW), the CO2 laser device / fiber laser system can also be used extremely flexibly in your production. skyCUBE laser devices meet all requirements of class 1 according to DIN EN 60825-1 and thus offer you the highest level of safety. Depending on the selected and installed laser power, this CO2 laser / fiber laser is ideally suited for cutting and engraving many materials, such as: various metals, acrylic glass, solid wood and wood-based materials, wood composite materials, paper, cardboard, various plastic and foam materials, textiles, and much more The excellent design of the laser machine, 100% produced in Plauen/Germany, guarantees the laser user a high working accuracy with consistently high quality from the metal construction to the laser source. With a cutting speed of up to 8000 mm/s and an engraving speed of up to 4000 mm/s, the high-quality laser technology produces clean and very sharp cut edges and precise laser engravings. The ergonomic design with a pull-out work table makes it easier to load the system. A drawer in the lower part of the machine is used to collect the clippings. User-friendly and intuitive - the supplied skyCUBE PC software (ready for Windows®). A simple, practical user interface adapted to the Windows standard lets you work quickly and effectively. The software is characterized by high system stability, professional monitoring with appropriate machine operation and control as well as compatibility with common file formats. The data is output via levels - separately for each level, including definition of the sequences and the type of processing. The parameters, such as laser power and processing speed, are automatically saved for each level and can therefore be retrieved in a material database at any time and can be reproduced. With a computer connected via LAN / USB interface, the laser projects are transferred to the skyCUBE M laser processing center. From there, these can be processed repeatedly without the PC having to be switched on. A modern touch control panel gives you access to all system information and functions. Laser processing center skyCUBE at a glance: German industry standard Machine steel construction for safe and vibration-free accommodation of the laser components and axis systems, on rollable industrial leveling feet

Condition: new, Year of construction: 2025, PFEIFER technology skyCUBE P class 1250 x 1250mm - 200W CO2 laser Nwjdscwpkpopfx Am Uji The flatbed laser center (* Prices depending on equipment, this is a brand new laser machine from our production) The multifunctional flatbed laser center skyCUBE, produced by PFEIFER technology in Saxony/Germany, was developed for your professional cutting tasks and classic laser engravings. It combines high productivity with economy and precision. Your purchase will therefore pay for itself after a short time. The machine housing, made of welded and screwed steel construction, is designed for industrial and commercial use. The drive system developed by PFEIFER technology ensures precision and high repeat accuracy. skyCUBE laser devices meet all requirements of class 1 according to DIN EN 60825-1 and thus offer you the highest level of safety. The ergonomic design with a pull-out work table makes it easier to load the system. A drawer in the lower part of the machine is used to collect the clippings. Simple, user-friendly and intuitive - the skyCUBE PC software makes planning, executing and controlling your production tasks child's play. The processing of your project data takes place via levels (colors), whereby the order and processing type can be specified separately for each level. The determined parameters can be permanently stored and retrieved in a material database. The laser programs are transferred to the machine control with a computer connected via a LAN/USB interface. A modern touch control panel gives you access to all system information and functions. Laser processing center skyCUBE at a glance: German industry standard Machine steel construction for safe and vibration-free accommodation of the laser components and axis systems, on rollable industrial leveling feet 8" touchscreen display simply see more, control more, communicate more with the skyCUBE laser processing center Redundant safety system - Class 1 laser Safety: Shutter --ᐳ active mechanical beam path shutter pull-out work table drawer integrated access and observation hatch pull-out clippings drawer Air-washed optics - filtered air supply to all laser components to protect the optics program-controlled process gas control Drive system developed by PFEIFER technology for precision and high repeatability PFEIFER technology mirrors and optics for perfect results with laser engraving and cutting CO2 laser IRADION®, SYNRAD®, laser sources for perfect laser beam quality and quality over a long period of time tested and stable brand power supplies according to the laser source illuminated machine interior Easy-to-learn operation even without advanced CAD knowledge Safety: BG certified emergency stop / door and safety monitoring Security: Key switch to prevent unauthorized use of the system central vacuum engraving cut fume extraction port Multifunctional cutting table with low-reflection, removable support elements for laser material processing Optionally available: Laser source and optical system according to application specifications PFEIFER technology linear motor for X/Y axis

Condition: new, Year of construction: 2025, 2D / 3D FIBER LASER MARKING MACHINE skylaser Mark - 2D 3D optional fiber laser engraving / marking laser is the complete solution for your complex laser engraving - Applications Our systems are used skylaser Mark exactly where the conventional CO2 laser technology has its limits. By means of the fiber laser with a wavelength of 1064 nm can also be realized delicate structures in almost any material. In contrast to conventional milling process, the laser operates without contact, without force and without tool wear. Benefits in your application is the geometric flexibility and high machining accuracy. Regardless of the hardness of the workpiece to be machined, this type of processing to be applied. With the work table adjustable to your needs and increases the flexibility of the mobile system. You can easily integrate the system into your production line, or operate as a stand-alone solution. Our Mark skylaser provide very precise and permanent markers (laser engraved) and the laser application area metal and certain organic substances suitable for the special. The use of a variety of fonts, apply bar codes, serial numbers, logos, and images is easily possible. Thanks to the excellent resolution almost all requirements of marking tasks can be solved. Manufacture of stamping dies, engraving, labels and more complex, fine structures, the software is extremely user friendly. Even very complex and elaborate marking tasks can be easily supplied to the industrial PC to easily create. The exact positioning is done in no time, thanks to the Optional camera for process monitoring and tracking software-based workpiece alignment. 2D / 3D FIBER LASER MARKING MACHINE skylaser Mark - 2D 3D optional fiber laser engraving / marking laser is the complete solution for your complex laser engraving - Applications Our systems are used skylaser Mark exactly where the conventional CO2 laser technology has its limits. By means of the fiber laser with a wavelength of 1064 nm can also be realized delicate structures in almost any material. In contrast to conventional milling process, the laser operates without contact, without force and without tool wear. Benefits in your application is the geometric flexibility and high machining accuracy. Regardless of the hardness of the workpiece to be machined, this type of processing to be applied. With the work table adjustable to your needs and increases the flexibility of the mobile system. You can easily integrate the system into your production line, or operate as a stand-alone solution. Our Mark skylaser provide very precise and permanent markers (laser engraved) and the laser application area metal and certain organic substances suitable for the special. Nwedsbnpd Nspfx Am Uji The use of a variety of fonts, apply bar codes, serial numbers, logos, and images is easily possible. Thanks to the excellent resolution almost all requirements of marking tasks can be solved. Manufacture of stamping dies, engraving, labels and more complex, fine structures, the software is extremely user friendly. Even very complex and elaborate marking tasks can be easily supplied to the industrial PC to easily create. The exact positioning is done in no time, thanks to the Optional camera for process monitoring and tracking software-based workpiece alignment. Views housing patterns: We adapt "us" and your machine to your tasks!

Year of construction: 2024, condition: new, ZIGZAG air separators Application description: Nwjdsua D Alepfx Am Uji ZIGZAG type air separator is a device designed to purify materials in the waste recycling process. The separator separates light fractions from heavy fractions by pneumatic method. It works well with a wide range of waste materials of 0-150mm size. Air separators of this type are used for pre-ground, jagged or very fine materials. Thanks to our unique design, the separator has the ability to adjust at many points that are important for the purity of the received fractions. ZIGZAG type separators are used in many areas: weight classification of metal granules purification of shredded scrap from the light fraction (films, plastics, paper) removal of volatile fraction during recycling of WEEE purification of plastics, rubber purification of municipal waste, glass removal of dust Construction description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first part, the ZIGZAG module is installed. The module has an inspection hole and regulation of the material stream passage gap. In the second part there is a cyclone discharging the light fraction. Underneath the cyclone there is a variable speed sluice for ejection of separated materials. A fan with electronic speed control is located on top of the structure. The structure is designed in part for loading and unloading by conveyor belts. The separator has a control cabinet equipped with a safety system.

Condition: new, Year of construction: 2024, operating hours: 1 h, functionality: fully functional, Eddy Current separators from the Magnetic Series are mainly used in the waste recycling industry. The use of eddy currents allows for the recovery of non-ferrous (non-magnetic) metals from loose waste such as aluminum, copper, brass etc. The WPS separators are characterized by high separation accuracy due to the original solutions by ZŁOMIARZE, which guarantees high profitability of waste recycling. Wps separators are used in the recovery of: non-ferrous metals from the recycling of electronic waste non-ferrous metals from car recycling metals from foundry waste aluminum in glass recycling processes non-ferrous metals from steel waste non-ferrous metals from municipal waste Description of Operation: The material delivered by the vibratory feeder is placed on the conveyor belt of the eddy current separator. The separator belt transports the material toward the high-speed magnetic rotor. The magnetic rotor creates high-frequency magnetic field by using maximized system of alternating magnetic fields. The alternating magnetic field induces eddy currents in metals. These currents counteract the external field and lead to the rejection of colored metals outside the material stream. A divider installed at the end of the separator is provided for the separation of materials. The central magnetic rotor has been designed to handle the smallest materials, providing the ability to recover particles up to 1 mm in diameter. Nsdpfju Dg Uhex Am Uowi We also have larger sizes of eddy current separators - catalog in documents.

Year of construction: 2024, condition: new, WPS Eddy Current Separator, Magnetic Series. Eddy Current separators from the Magnetic Series are mainly used in the waste recycling industry. The use of eddy currents allows for the recovery of non-ferrous (non-magnetic) metals from loose waste such as aluminium, copper, brass etc. The WPS separators are characterized by high separation accuracy due to the original solutions by ZŁOMIARZE, which guarantees high profitability of waste recycling. WPS Separators are used in the recovery of: • non-ferrous metals from the recycling of electronic waste • non-ferrous metals from car recycling • metals from foundry waste • aluminium in glass recycling processes Nsdpfjiqxtbox Am Uewi • non-ferrous metals from steel waste • non-ferrous metals from municipal waste To ensure the longevity of the equipment, the ZŁOMIARZE, as one of few companies, has introduced an improvement in the form of the central cooling of the bearings of the magnetic rotor, thanks to which the service life of the machine has been extended even several times. Technical Specification: • Magnetic field source – NdFeB magnets • Smooth adjustment of magnetic rotor speed – 0-3000 rpm • Belt speed adjustment • Belt position control system • Magnetic rotor cleaning cleats • Belt cleaning scraper • Material divider adjustable in two levels • Bearing cooling system (greatly extends bearing life) • Control panel with safety check For our non-ferrous metal separator we offer additional devices to make you separation process easier: • vibratory feeder • belt conveyors • magnetic drum/belt separators For more information please download our catalog. If you're interested in our products, please contact us!

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Barberan laminating machine for door frames Nodpfjy Aibcsx Am Uewi

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, Overband Magnet Type UB 600 Operating voltage 3x400 V Frequency 50 Hz Njdpexy Hl Dsfx Am Uewi Rated operating current 5 A Operating speed 30 – 90 rpm Maximum sound pressure level 50 dB Machine weight 750 kg Location: Austria Available immediately

Year of construction: 2024, condition: new, We manufacture and provide drums for mobile and stationary screeners, for : Pronar MPB 18.47 Pronar MPB 20.55 Nedpfx Amofkm Dps Uowi Pronar MPB 20.72 also Terra Select, Eggersmann, Doppstadt, Komptech , Mc Closkey... Bespoke maded drums are our specjality. In case of any question, please contact me by mobile or e-mail.

Year of construction: 2024, condition: new, We manufacture and provide drums for mobile and stationary screeners, for : - Eggersmann T 40 - Terra Select T 4 Nwodpfx Asfkm Dfsm Uei - EggersmannT 50 - Terra Select T 5 - Eggersmann T 55 - Terra Select T 6 - Eggersmann T 60 - Terra Select T 7 - Eggersmann T 70 - Eggersmann T 80 also Doppstadt, Pronar, Komptech , Mc Closkey... Bespoke maded drums are our specjality. In case of any question, please contact me by mobile or e-mail..

Year of construction: 2024, condition: new, Drum for Doppstadt screener SM 518 and SM 620 on stock. CHECK AVAILABLE PERFORATIONS. We manufacture and provide drums for mobile and stationary screeners, for : Nwsdpfxsfi Tqbo Am Uji - Doppstadt SM 414 - Doppstadt SM 518 - Doppstadt SM 618 - Doppstadt SM 620 - Doppstadt SM 718 - Doppstadt SM 720 - Doppstadt SM 725 also Terra Select, Eggersmann, Pronar, Komptech , Mc Closkey... Bespoke maded drums are our specjality.. In case of any question, please contact me by mobile or e-mail.

Year of construction: 2014, condition: good (used), power: 260 kW (353.50 HP), color: yellow, machine/vehicle number: 214034, Painting-drying booth with semi-vertical air flow "ITALO-1-SV", brand Lackro, manufacturer Eco-Air Technology S.R.L. Italia, year of manufacture: 2014 Cabin interior dimensions: length 14.06 m X width 5.04 m X height 4 m, maximum air flow: 40-45000 mc/h, thermal power: 260 Kw, fuel: diesel, installed electric power: 26 Kw three-phase, tank fuel included, the cabin has a special lighting system, 30 superior filter cells for purification with carbon, dimensions: 500x500x50 mm, side service door, two central hinged doors, trolley for parts, burner chimney on diesel, the cabin has the user and maintenance manual Attention customers: this cabin will be delivered disassembled and loaded for transport from our company headquarters in Oradea. Industrial drying painting cabin "ITALO-I-SV" MOD. ECO – L=14,060 mm x w=5,040 mm x H=4,000 mm with semi-vertical air flow Suction group Suction and filtration unit ECO-SM-5 Maximum air flow at 250 Pa m3/h 40,000-45,000 Maximum thermal power kW 260 VATRA 232 Fuel type DIESEL Installed three-phase electric power: kW (2x7.5) +(2x5.5) Filter cells 500 mm x 500 mm x 500 mm 30 pieces Bag filter Ǿ 280 x 1000 mm pieces 10 Ceiling grid 975 x 1855 mm 28 pieces Generator pre filters 1,000 mm x 800 mm x 50 mm pieces 2 Andreae suction wall filter 0.9 m x 5 m pieces 3 Nedpfxjp S Tlho Am Ujwi The maximum size of the piece in the cabin L=12 m x w=3 m x H= 3.2 m For any details, do not hesitate to contact me by phone. Price 79.900 Euro + VAT, Ex Works Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2014, condition: excellent (used), functionality: fully functional, We offer for sale a Bonded Panel Technology LTD (Duemas) Lamella Cutting System for mineral wool boards, complete with extraction unit, manufactured in 2014 and in very good technical condition. This equipment is engineered for precise cutting of mineral wool boards into lamellas with adjustable thicknesses from 40 mm to 200 mm, making it ideal for sandwich panel and insulation material producers. The system comprises: - Lamella saw with 35 Ø550 mm blades (15 new blades in original packaging) - Two 3-meter gravity conveyors - Additional main shaft (2 shafts in total) - Complete set of spacers and top boards for 40, 50, 60, 80, 100, 120, 150, and 200 mm - Complete dust extraction system with 15 kW Auto Shaker filter Nsdpfsyk Dmnox Am Uowi - Full ductwork and connection components Main technical data: - Maximum slab width: 1010 mm - Maximum slab thickness: 200 mm - Main motor: 15 kW - Power supply: 415V, three-phase - Approx. 3,000 operating hours (2014–2019) This equipment has been well maintained and is in very good working condition. Immediate availability.

Condition: used, Mitsubishi FREQROL FR-SF-2-26K-TCG AC Spindle Controller / Spindle Drive For sale is a used Mitsubishi FREQROL FR-SF-2-26K-TCG AC Spindle Controller, removed from a MAZAK MULTIPLEX CNC turning center. The unit shows normal signs of use and handling consistent with its age and industrial application (see original photos). The Mitsubishi FREQROL FR-SF series is designed for precise spindle motor control in CNC machine tools, offering reliable performance in demanding industrial environments. Technical Specifications Nodjzn Ak Sepfx Am Ujwi Manufacturer: Mitsubishi Electric Series: FREQROL Model: FR-SF-2-26K-TCG Type: AC Spindle Controller / Spindle Drive Voltage Class: 200 V Application: CNC machine tools, turning centers, machining centers, spindle motor control Origin Removed from: MAZAK MULTIPLEX CNC Turning Center Professionally dismantled Condition Used Normal cosmetic wear from industrial use Please refer to the photos for the exact condition Sold exactly as shown Functionality: Untested (or Fully functional when removed from service, if applicable) Scope of Supply 1 × Mitsubishi FREQROL FR-SF-2-26K-TCG AC Spindle Controller Only the items shown in the photos are included Note This is a used industrial component and may show signs of wear due to previous use. The photographs are an integral part of the item description. Please verify the model and part number before purchasing to ensure compatibility with your machine.

Condition: used, Mitsubishi FREQROL FR-SF-2-26K-TCG AC Spindle Controller / Spindle Drive For sale is a used Mitsubishi FREQROL FR-SF-2-26K-TCG AC Spindle Controller, removed from a MAZAK MULTIPLEX CNC turning center. The unit shows normal signs of use and handling consistent with its age and industrial application (see original photos). The Mitsubishi FREQROL FR-SF series is designed for precise spindle motor control in CNC machine tools, offering reliable performance in demanding industrial environments. Technical Specifications Manufacturer: Mitsubishi Electric Series: FREQROL Model: FR-SF-2-26K-TCG Type: AC Spindle Controller / Spindle Drive Voltage Class: 200 V Application: CNC machine tools, turning centers, machining centers, spindle motor control Origin Nwsdpjzn Ak Ejfx Am Uji Removed from: MAZAK MULTIPLEX CNC Turning Center Professionally dismantled Condition Used Normal cosmetic wear from industrial use Please refer to the photos for the exact condition Sold exactly as shown Functionality: Untested (or Fully functional when removed from service, if applicable) Scope of Supply 1 × Mitsubishi FREQROL FR-SF-2-26K-TCG AC Spindle Controller Only the items shown in the photos are included Note This is a used industrial component and may show signs of wear due to previous use. The photographs are an integral part of the item description. Please verify the model and part number before purchasing to ensure compatibility with your machine.

Condition: used, Year of construction: 1995, Mitsubishi Operation Board 4YZ405B-3 for MAZAK MULTIPLEX 620 MARKII For sale is an original Mitsubishi Operation Board (Operator Control Panel) removed from a MAZAK MULTIPLEX 420 CNC turning machine. Specifications: Manufacturer: Mitsubishi Electric Corporation Description: Operation Board Part Number: 4YZ405B-3 Manufacturing Date: 1995 Made in Japan Condition: The operation board was professionally removed from a machine. It is in used condition with normal signs of wear, including scratches and surface marks (see photos). The display and all control buttons are included as shown. Nwedpfxezn Akrj Am Uei Scope of Delivery: Complete Mitsubishi Operation Board as shown in the photos No additional accessories included Compatible With: MAZAK MULTIPLEX 620 MARKII May also be compatible with other MAZAK machines equipped with Mitsubishi CNC controls. Please verify compatibility using the part number YZ417A-3 before purchasing. Note: This is a genuine used OEM replacement part removed from a machine. It is sold in the used condition as shown in the photos.

Condition: used, Mitsubishi Operation Board YZ417A-3 for MAZAK MULTIPLEX 420 Nwedezn Akljpfx Am Usi For sale is an original Mitsubishi Operation Board (Operator Control Panel) removed from a MAZAK MULTIPLEX 420 CNC turning machine. Specifications: Manufacturer: Mitsubishi Electric Corporation Description: Operation Board Part Number: YZ417A-3 Manufacturing Date: January 1990 Made in Japan Condition: The operation board was professionally removed from a machine. It is in used condition with normal signs of wear, including scratches and surface marks (see photos). The display and all control buttons are included as shown. Scope of Delivery: Complete Mitsubishi Operation Board as shown in the photos No additional accessories included Compatible With: MAZAK MULTIPLEX 420 May also be compatible with other MAZAK machines equipped with Mitsubishi CNC controls. Please verify compatibility using the part number YZ417A-3 before purchasing. Note: This is a genuine used OEM replacement part removed from a machine. It is sold in the used condition as shown in the photos.

Condition: used, Mitsubishi FREQROL FR-SF-2-26K-TCE AC Spindle Controller / Spindle Drive For sale is a used Mitsubishi FREQROL FR-SF-2-26K-TCE AC Spindle Controller, removed from a MAZAK MULTIPLEX CNC turning center. The unit shows normal signs of use and handling consistent with its age and industrial application (see original photos). The Mitsubishi FREQROL FR-SF series is designed for precise spindle motor control in CNC machine tools, offering reliable performance in demanding industrial environments. Technical Specifications Manufacturer: Mitsubishi Electric Series: FREQROL Model: FR-SF-2-26K-TCE Type: AC Spindle Controller / Spindle Drive Power Rating: 26 kW Voltage Class: 200 V Application: CNC machine tools, turning centers, machining centers, spindle motor control Origin Removed from: MAZAK MULTIPLEX CNC Turning Center Professionally dismantled Condition Used Normal cosmetic wear from industrial use Please refer to the photos for the exact condition Sold exactly as shown Functionality: Untested (or Fully functional when removed from service, if applicable) Scope of Supply 1 × Mitsubishi FREQROL FR-SF-2-26K-TCE AC Spindle Controller Only the items shown in the photos are included Nedpfxozn Akfe Am Uswi Note This is a used industrial component and may show signs of wear due to previous use. The photographs are an integral part of the item description. Please verify the model and part number before purchasing to ensure compatibility with your machine.

Condition: used, Year of construction: 1990, Mitsubishi Operation Board YZ417A-3 for MAZAK MULTIPLEX 420 For sale is an original Mitsubishi Operation Board (Operator Control Panel) removed from a MAZAK MULTIPLEX 420 CNC turning machine. Specifications: Manufacturer: Mitsubishi Electric Corporation Nwedpfxjzn Ai Is Am Uei Description: Operation Board Part Number: YZ417A-3 Manufacturing Date: January 1990 Made in Japan Condition: The operation board was professionally removed from a machine. It is in used condition with normal signs of wear, including scratches and surface marks (see photos). The display and all control buttons are included as shown. Scope of Delivery: Complete Mitsubishi Operation Board as shown in the photos No additional accessories included Compatible With: MAZAK MULTIPLEX 420 May also be compatible with other MAZAK machines equipped with Mitsubishi CNC controls. Please verify compatibility using the part number YZ417A-3 before purchasing. Note: This is a genuine used OEM replacement part removed from a machine. It is sold in the used condition as shown in the photos.

Condition: used, Mitsubishi FREQROL FR-SF-2-26K AC Spindle Controller / Spindle Drive For sale is a used Mitsubishi FREQROL FR-SF-2-26K AC Spindle Controller, removed from a MAZAK MULTIPLEX CNC turning center. The unit shows normal signs of use and handling consistent with its age and industrial application (see original photos). The Mitsubishi FREQROL FR-SF series is designed for precise spindle motor control in CNC machine tools, offering reliable performance in demanding industrial environments. Technical Specifications Manufacturer: Mitsubishi Electric Series: FREQROL Model: FR-SF-2-26K Type: AC Spindle Controller / Spindle Drive Voltage Class: 200 V Application: CNC machine tools, turning centers, machining centers, spindle motor control Origin Removed from: MAZAK MULTIPLEX CNC Turning Center Professionally dismantled Nwedpfx Amjzn Aizo Uoi Condition Used Normal cosmetic wear from industrial use Please refer to the photos for the exact condition Sold exactly as shown Functionality: Untested (or Fully functional when removed from service, if applicable) Scope of Supply 1 × Mitsubishi FREQROL FR-SF-2-26K AC Spindle Controller Only the items shown in the photos are included Note This is a used industrial component and may show signs of wear due to previous use. The photographs are an integral part of the item description. Please verify the model and part number before purchasing to ensure compatibility with your machine.

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Multi-spindle universal dowel drilling machine with 3 numerical axes (+/- 0.1 mm) with horizontal and vertical drilling capability electronic adjustment of height, depth and drilling angle (0-90°) with 7" color touchscreen with memory for up to 1000 programs with parallel guides with numerical adjustment with 21 drilling spindles (10 left and 11 right) Spindle spacing: 32 mm max. drilling distance: 640 mm max. tool diameter: 40 mm max. drilling depth: 65 mm max. horizontal drilling height: 35 mm Working height: 860 mm max. plate thickness: 60 mm max. plate size: 900 x 3000 mm Motor: 1.5 kW - 2800 rpm Pneumatic connection: 6/8 bar Compressed air consumption per working cycle: 5 NL Dust extraction connection: 80 mm Machine footprint: 1580 x 950 x 1400 mm Net weight: 340 kg Availability: short-term Nwedpelk R Epofx Am Uei Location: Flörsheim

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Pamasol Small Scale Plant Nwodpsznwwaefx Am Uei Type: 2005/100 Year: 2015 Device is in excellent condition, very little use. Unit was removed from the a "blue chip" pharma company operating in Cork, Ireland.

Condition: new, FANUC MONITOR D12CM-01B - A61LL2 - NEU OZUCHI Condition: NEW, incl. packaging Nwsdpfx Aszman Sjm Uoi