Used Cross Moving Table for sale (21,599)

Condition: new, GRAULE ZS 170 N cross-cut and mitre saw - tiltable - Includes: - GRAULE ZS 170 N cross-cut and mitre saw - tiltable - - without machine stand and saw blade - Including: - GRAULE machine stand for type ZS 135 N and ZS 170 N Includes: - GRAULE type RO feed roller conveyor Fjdpou R Sypofx Al Uspn complete with support feet and connection bracket Plastic rollers with ball bearings Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Includes: - GRAULE type RLK roller conveyor/length stop with scale and material stop that can be folded back. Ball bearing mounted plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm - new exhibition machine -

Condition: used, Controlled cross table, cross sliding table, clamping table, clamping plate with T-slots, clamping angle, cross table NC, linear robot, coordinate table -Controlled cross table: was used as a soldering station -Manufacturer: Walko, cross table NC type PNC 500 -Table surface: 600 x 300 mm -Travel approx.: X 500 mm / Y 350 mm -Dimensions: 1050/1030/H1530 mm -Weight: 240 kg Fedpfxehtn Sbe Al Uspn

Condition: used, Year of construction: 2000, with automatic stop The stop slides the material to be cut to the cutting position according to the entered measurement Saw blade: rising from below Maximum saw blade diameter (mm): 300 right long table: with automatically adjustable stop Fsdpfxjx Srrvj Al Ujpn Table length (mm): 3200 Table width (mm): 120 Roller conveyor left: roller conveyor length – 3550 mm, roller conveyor width – 310 mm Roller width (mm): 240 Roller conveyor and stop table: not separable Machine weight (kg): 80 without extraction system as shown

Condition: used, saw blade diameter: 500 mm, overall weight: 600 kg, No. 04547 Under-table crosscut saw Paul 15 AOM Fjdez Eu Ubjpfx Al Ujpn Used Saw blade diameter max. 500 mm Main saw motor power 4.4 kW Max. cutting height approx. 150 mm Max. cutting width approx. 875 mm Max. cutting width at 150 mm cutting height approx. 720 mm (with Ø 500 mm saw blade) Hydraulic saw feed Lifting force 2500 N Up to 25 cuts per minute Two-hand operation Hydraulic power unit Dust extraction connections Incl. 2 roller conveyors (approx. 2900 x 700 mm and approx. 1550 x 700 mm) Transport dimensions machine approx. 1200 x 1200 x 1400 mm LWH, roller conveyors approx. 3000 x 1200 x 800 mm LWH Weight approx. 600 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, machine/vehicle number: 008703, X axis working area: 3650 mm Fsdpfx Aezq Ur Tol Uspn Y axis working area: 1600 mm Working Table: Flat table Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Total number of drilling spindles: 37 Total number of tool changer positions: 18

Year of construction: 1980, condition: used, machine/vehicle number: 30245035, The offer here is a double shear table. The machine dates back to 1980 and has a lifting capacity of 4,000 kg. The lifting table has a driven runway system and has the XYZ function (lifting, process, etc). Fodpfx Ajgtmv Ssl Uepn The advantage of double scissors is that they can achieve a high operating stroke when space is limited. The dimension is 8. 20 m long and 1. 20 m wide. The conveyor belt has a width of 80 cm and 10 cm roll diameter.

Condition: used, machine/vehicle number: 008238, X axis working area: 3660 mm Y axis working area: 1550 mm Fpsdpfsx A E Tfjx Al Uon Working Table: Flat table Main Electrospindle power: 12 KW Number of controlled axes: 3 axes Total number of drilling spindles: 12 Total number of tool changer positions: 15

Condition: used, machine/vehicle number: 007564, X axis working area: 3700 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 10 KW Fpedpfx Aljum H Eks Uen Number of controlled axes: 3 axes Total number of drilling spindles: 12 Total number of tool changer positions: 13

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, cutting height (max.): 155 mm, cutting width (max.): 1,250 mm, saw blade diameter: 450 mm, cutting length (max.): 3,450 mm, The machine has been completely overhauled by the manufacturer! TECHNICAL DETAILS Sawing unit Cutting height: max. 155 mm Cutting height at 45°: max. 105 mm Saw blade diameter: max. 450 mm Saw blade arbor: 30 mm Swivel range: 0–46° Motor power: 5.5 kW Speed: 3,000 / 4,000 / 5,000 / 6,000 rpm Cutting range Cutting width: 1,250 mm Cutting length: 3,450 mm Sliding table length: 3,200 mm Cross slide and stops Fpodoz Irygjpfx Al Uon Digital folding stops: 3 Cross slide extendable up to: 3,500 mm Positioning accuracy parallel stop: 0.1 mm EQUIPMENT Scoring unit Auto-EPS with electromechanical side and height adjustment Electrically controlled parallel stop Electrically controlled axis adjustment Cross slide with 3 digital folding stops Machine completely overhauled by the manufacturer Sliding table completely re-adjusted Linear guide rail converted to a new digital system with 3 stops Stainless steel scale for angle adjustment renewed Cross slide checked 90° locking of the fence completely renewed Electrical system checked Machine re-adjusted, checked, and lubricated German-language documentation

Condition: used, machine/vehicle number: 005796, X axis working area: 3700 mm Y axis working area: 1550 mm Fpedpfxjhwi U To Al Ujn Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 10 Total number of tool changer positions: 8

Condition: good (used), functionality: fully functional, Robust RAPID PK 100 table saw in a solid design, featuring a sliding table and adjustable fence system. The saw blade can be tilted up to 45°. With a saw blade diameter of 250 mm, the maximum cutting height is approximately 75 mm. The cutting width to the right of the saw blade is approximately 600 mm. The saw arbor is driven by a narrow V-belt. A saw blade is included in the scope of delivery. Fjdpoz Eh Nrsfx Al Uspn Technical data: Motor power: 3 kW Three-phase motor, protection class IP54 Motor speed: 2,860 rpm Saw arbor drive via narrow V-belt Saw arbor speed: 5,200 rpm Table size: approximately 850 × 700 mm Cutting width to the right of the saw blade: approximately 600 mm Cutting height: approximately 75 mm with a Ø 250 mm saw blade Saw blade can be tilted up to 45° Dust extraction port on the rear of the machine: Ø 100 mm Dimensions: approximately 800 × 1,200 × 1,400 mm Weight: approximately 250 kg Equipment: Sliding table Length/cross stop with scale Parallel fence Tiltable saw blade up to 45° Dust extraction connection Ø 100 mm Includes saw blade The machine can be inspected and tested under power after arranging an appointment. Transport is possible for an additional charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information is without guarantee.

Condition: used, Year of construction: 2006, number of axes: 3, working width: 1,250 mm, working length: 3,100 mm, TECHNICAL DETAILS Working area, X-axis: 3,100 mm Working area, Y-axis: 1,250 mm Max. panel thickness: 85 mm Number of controlled axes: 3 Drilling unit Number of drilling units: 1 Position of drilling unit: top Vertical drilling spindles: 7 Horizontal drilling spindles, X-direction: 2 Horizontal drilling spindles, Y-direction: 2 Total number of vertical and horizontal drilling spindles: 11 Milling unit Number of milling spindles: 1 Position of milling spindle: top Controlled axes: 3 Motor power: 9 kW Automatic tool changer: yes Grooving unit Number of grooving units: 1 Position of grooving unit: top Swivel positions: 0° / 90° Number of tool magazines: 1 Tool positions: 8 Position of tool magazine: machine side Number of work tables: 1 Table width: 3,100 mm Table length: 1,250 mm Table material: phenolic resin MACHINE DETAILS Number of vacuum pumps: 1 Suction capacity per pump: 250 m³/h Fpjdpsz En Afjfx Al Uon Control system: PC Control Programming software: WoodWOP 5.0 EQUIPMENT Flat table design Nesting work table Vacuum pump Automatic tool changer Tool magazine positioned on the side Safety light barriers CE marking The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6279

Condition: used, Year of construction: 2002, Brand and Model: SORALUCE SP-5000 Type: Traveling column Cnc: Heindehain 426 Year: 2002 Octagonal Head Indexed Degree-by- Degree Vertical course 1.600 mm Cross course 1.200 mm Longitudinal course 3.500 mm Width of the T slots: 22 mm Weight máximum carrying load on table: 3.000 kg/ m² Motor power : 30 kw Taper : DIN-69871 -AD Speed range : 4.000 r/min Range of maximum working feeds: 5.000 mm/min Total machine width : 1.560 mm Quick course vertical axis: 15.000 mm/min Fpodpfxsz Ekdrs Al Usn Quick course cross axis: 15.000 mm/min Quick course longitudinal axis: 15.000 mm/min Maximum thrust from the spindle to the cutting tool: 11.000 N Internal cooling Machine equipped with a HIGH SPEED HEAD

Year of construction: 2022, condition: used, Used Equipment Year of Manufacture: 2022 Features and Technical Specifications: - Allows one person to effortlessly load panels onto the platform frame and swivel it from the vertical to the horizontal position - For use with format or panel cutting saws, on a shelf, or while moving between stations - Swivel frame with two-position locking mechanism in vertical and horizontal positions - Table height can be adjusted to the desired working height using a foot-operated hydraulic system Fedpfxszk Nqds Al Uopn - Design featuring a smooth-operating scissor mechanism ensures that the platform can be raised and lowered absolutely parallel - Sturdy support rollers on the lower support and multiple all-directional casters ensure smooth, ergonomic operation - Counterweight on the lower frame for secure footing and maximum stability when moving the table - Unrestricted access to the workstation table’s control pedal - Easy to maneuver thanks to four swivel casters with a diameter of 125 mm - Two casters are equipped with brakes - The swivel frame can be mounted on and removed from the platform base frame in just a few simple steps - Meets the safety criteria of EN 1570-1 - Load capacity: 300 kg - Maximum table height: 1010 mm - Minimum table height: 400 mm - Swivel frame width: 1800 mm; length: 1500 mm - Casters: 125 mm in diameter Dimensions: 1,200 x 740 x 400 mm Weight: approx. 80 kg Swivel frame weight: 10 kg Availability: available shortly Storage location: 63934 Röllbach

Condition: excellent (used), Year of construction: 2020, - total length: 8,1 m - total width: 1200 mm - height: 950 mm Fpjdpfx Aletddw Aj Uen Hydraulic lift, lifting capacity around 1 ton.

Condition: used, Fixed table 850 x 1100mm in grey cast iron - Table height 900mm - 3.3m sliding table, anodised aluminium construction, wear resistant tempered guides with self cleaning design. Replaceable table edge. Infinitely locking design - Min / max blade dia 250mm - 400mm giving 130mm max cutting height at 90 degrees 30mm bore with 2 x 8mm drive pins / 60mm ctres. - 5.5kw motor 4000 / 4800 / 6000 rpm rotation speed - Blade tilting up to 46 degrees - Power rise / fall / tilt, with rapid and slow creep movement - Riving knife mounted saw guar - Pro lock quick change system of the saw blade - Rip fence with easy sliding movement thanks to four grooved ball bearings. Micro metric adjustment and scale. Movement via handwheel - Cutting width - blade to rip fence 1350mm Fedpoz N Hcmefx Al Ujpn - Cross cut fence in anodised aluminium with continuous support, micro adjustment for both flip stop. Cutting length 95 to 2000mm, can be extended to 3220mm - Cross cut table in galvanised steel construction - Operating controls easily accessible on main frame - Dust extraction connection 100mm on overhead guard and 120mm dia in machine frame - 2 x riving knives 3.5" TFT overhead control unit at eye level with keyboard. - Electronic control of cutting height / cutting angle in program memory - Tool calculation including storage of 50 blades - Memory of 10 cut lists each with 50 cutting lines - FK for shortcut to frequently used functions - USB interface -2 axis scoring saw electrically adjustable. Scoring saw height and left / right position can be electrically adjusted while blade is running. Pneumatic lifting / lowering - Handndwheel adjustment of the rip fence and digital indication in control panel - 1 x 350mm dia main blade and solid scoring blade - 3.3m sliding table - Parallelogram crosscut table with analogue stop - LCD readout of angle setting

Condition: used, The Ulmia 1622 table saw is designed for precise rip and cross cuts in solid timber and wood-based materials. Its robust construction ensures reliable performance in craft workshops and general workshops. Ideal for joinery and general timber and furniture construction. Technical data: - Table size: 560 x 710 mm Fsdpfjzryvtex Al Ujpn - Saw blade diameter: max. approx. 300 mm - Motor: 1.5 kW

Condition: good (used), Year of construction: 2008, Hydraulically Height-Adjustable Pallet Truck from Witte - Alufix for loading coordinate measuring machines Fodpfxow Nylkj Al Ujpn With Hovercraft Air Bearing Plate Pallet truck with hydraulic height adjustment from approx. 660 mm to 950 mm. Table top coated with a roller on the broad side for bridging height differences between the table and measuring plate. Internal dimensions approx. 900 x 700 mm. Eurofix air bearing plate with handle and integrated air valve for easy movement and positioning of heavy workpieces on coordinate measuring machines. The surface is equipped with 50 mm grid pattern boreholes. The holes have a diameter of 12.5 mm, a depth of 7 mm, and M6 threaded inserts at the base. The air supply can be activated via the valve integrated in the handle, allowing the entire plate with the mounted measuring object to be moved very easily. Usable area (aluminum) is approx. 600 x 600 mm. Ideal for Witte Alufix clamping systems for fixture construction in the automotive sector, etc. Dimensions approx. 1000 x 800 x 660/950 mm (LxWxH). Weight approx. 100 kg. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse. See "more offers from this supplier."

Condition: used, Roller support for saw, composed of: 2 supports: L 3000 mm x Max width 550 mm x Mini height 800 mm - Max height 950 mm Fpodpsz I Dg Eofx Al Usn 1 support fitted on machine side (see photo): L 3000 mm x Max width 550 mm x Mini height 800 mm - Max height 950 mm Rolls width: 450 mm

Condition: used, Outfeed table before resaw IDL000793 Fpodpfxsul Rgvs Al Uon

Condition: ready for operation (used), Year of construction: 1975, Immediately available ex-works: Union table drilling machine Type BFT 90 / 2 Year of manufacture 1975 / Overhauled and fitted with digital displays in 2022 Spindle 90 mm Mounting SK 40 with adapter MK 4 Table 1120 x 1000 mm Table load 2500 kg Fsdpfoz I Na Djx Al Uopn Distance spindle – stop 2400 mm Travel distances X/Y Z 1000 / 1250 / 1000 mm Spindle speeds 8 - 1600 rpm 2 digital displays Stop Spindle travel 710 mm Weight 9 tons For the price of Euro 8,500.—plus VAT ex-works.

Condition: new, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW Speed 2.800 U/min. Required air-pressure 6-8 bar Working height 900 +/- 20 mm Dimensions (L/W/H) 10645x1000x1300 mm SALVAMAC COMBO 500 – The semi-automatic miter saw with SALVASTOP 100 - electronic length stop/slider ----- - Fedpsvu Hd Tofx Al Uspn Pos. 1: Legend 500 under table miter saw ----- - Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards that are on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced full-surface painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Motor power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balancing and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using new ball bearings with double dust protection and automatic lubrication system. CE compliant electrical system. The CE models must come standard with at least 1 meter long support plates at the inlet and outlet. Technical specifications: ----- Saw cross-section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 7 Nl Intake manifold: 1 - 120 mm / 1 - 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50Hz 3-phase Worktop height: 900 mm +- 20 mm Colour: Ral 7035 - Ral 1007 Pos. 2: Salvastop 100 electronic length stop ----- - - Working method: 2 modes 1 x stop (length stop moves to the specified length) and 1 x slide (several lengths are processed one after the other at the push of a button) - with servo drive - Ram speed: up to 60 m/min - slider length 600 mm - with a 7'' touch display - maximum weight of logs that can be pushed - up to 100 kg - USB connection COMBO_500 - 6400/7000 - Roller conveyor with guide to the right of the saw. Painted steel frame with galvanized castors. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. 3 m. - 6400/7000 SalvaStop 100 to the left of the saw. Working length 6.4 m. Total length 7.0 m. With table top 7 m. Width 320 mm. Demonstration machine additionally equipped with: UP & DOWN FRONT PROTECTION Movable instead of rigid front protection. The guard rises during cutting to ensure safe working conditions. Loading and unloading wood is simplified with the downward-facing guard. The system has another special, secured pneumatic system with linear guidance, which impresses with top quality and cutting-edge technology. SOFTWARE LINK FILES Preparation for data import via a Salvamac file template in CSV format. ----- Total price demonstration machine from stock 73447 Oberkochen: on request! ----- More options like longer/shorter inlet/outlet, Stop systems on re...

Condition: ready for operation (used), Year of construction: 1960, Available immediately ex works: Table drilling machine, Scharmann Type FB 125 b Year of manufacture 1960 Complete retrofit in 2020 Spindle 125 mm Metric 80 / SK 50 mounting Quill stroke 800 mm Table 1600 x 1200 mm Table traverse 2000 mm Fpjdpfxoz Ixl Nj Al Uen Installation height, spindle / table 1400 mm Table longitudinal travel 2500 mm Spindle speeds 5 – 740 rpm, 7.5 – 1100 rpm With Wohlhaupter machining: 5 – 74 rpm 3-axis Heidenhain digital display Vertical head Large Wohlhaupter turning head Various other accessories Weight 21 tons Price: Euro 7,500.00 + VAT, ex works

Condition: like new (used), Year of construction: 2020, FIBRO FIBROTOR EM12 Rotary Indexing Table 6+ units available Manufacturer: FIBRO Model: FIBROTOR EM12 Type: Rotary Indexing Table / Indexing Drive Condition: Installed in IMA line that was never commissioned. Almost new condition Application: Automated production, assembly, machining, handling and indexing systems EM.12.0220.9.152.08.0.0.3 0008143150-010-01 Description FIBRO FIBROTOR EM12 rotary indexing table, designed for high-precision intermittent rotary positioning in automated manufacturing and production machinery. The FIBROTOR range is widely used in industrial automation applications where accurate, repeatable indexing and positioning of workpieces or tooling is required. The EM12 provides a robust mechanical indexing solution and is suitable for integration into automated assembly lines, machining systems, transfer machines, packaging equipment and other special-purpose machinery. Key Features: FIBRO FIBROTOR EM12 rotary indexing table Precision intermittent rotary indexing Robust industrial construction Suitable for automated production machinery Repeatable positioning Designed for continuous industrial operation Suitable for assembly, machining, handling and transfer applications Compact mechanical indexing solution FIBRO quality engineering Fsdez Nahbjpfx Al Ujpn Keywords: FIBRO, FIBROTOR, EM12, rotary indexing table, indexing table, rotary indexer, indexing unit, rotary table, indexing drive, automation, industrial automation, machine tool, assembly machine, transfer machine, CNC, manufacturing, production line, industrial machinery, precision indexing, mechanical indexer.

Condition: like new (used), Year of construction: 2023, GENERAL DESCRIPTION: Advanced tooling with a dense and symmetrical structure of the clamping elements. Designed for precise positioning and rigid clamping of geometrically complex components (e.g., car body panels) during automated welding or spot welding processes. The design features a high degree of repeatability of the base points and is fully adaptable for mounting on a welding rotator. COMPONENTS: 1. DESTACO brand pneumatic (knee-type) clamps – 30 pieces. Heavy-duty clamping elements responsible for the mechanical locking of the part. 2. FESTO brand compact pneumatic cylinders – 14 pieces. Used for extending the positioning pins or auxiliary locks. 3. Clamp position sensors (inductive/magnetic) – approx. 30 pieces. Monitor the open and closed states of the clamping elements. 4. Pneumatic installation in thermal shields (Pyrojacket type) – a complete system of manifolds with flexible hoses in thick, red, fire-resistant braids, protecting against welding spatter. 5. Valve manifolds / pneumatic distributor blocks – 2 pieces. Control the operating sequences of the individual clamps. 6. Positioning blocks, reference bases (NC blocks) and pins. Precisely milled support points with engraved technological coordinates. Fedpfx Alez Ng Nyj Uepn 7. Main structural frame – 1 piece. Rigid, stress-relieved welded structure made of closed profiles, equipped with transport lugs and mounting plates for the rotator disc.