Used Crossfield Scanner for sale (323)

Condition: excellent (used), Here we offer you a Bielomatik laser welding system. Bielomatik laser welding system Machine description: The laser unit with integrated cooling for the laser is located in the lower left part of the machine frame. The tools are mounted on a 2-station rotary table, which rotates 180 degrees with each cycle. The work area with the welding station, the tool (on the rotary table) and the hold-down device for the product is located in the middle section of the machine frame. The control cabinet is installed at the rear. The welding station is protected against the insertion/removal area by a laser-tight cover. Itsdpfx Agjqay Uvszer The welding laser (the laser supply) is switched off when a maintenance door is opened. The welding parts are loaded and removed manually. The welding process runs automatically. Laser type: YLR-300-AC-Y11/IPG The cell was used for laser welding various plastic parts (front frame). For components measuring approx. 460 x 280 mm Basic data Equipment of the machine: 1 complete machine frame with cladding, substructure and protective devices, painted Adjustable machine feet, designed for transportation with forklift. 3 manual maintenance doors in the laser-safe processing area, each secured with guard door switch with guard locking. 4 manual maintenance doors underneath the machine table. The control cabinet is permanently installed at the rear of the machine Laser system Fab. IPG 1 fiber laser 300 Wcw, at the fiber end, 1070 nm completely air-cooled. 1 power supply unit for laser unit, target beam laser and glass fiber 1 Vario-Scan for 3D welding contour 1 scanner - 20 aperture Optics, F-Teta lens, focal length determines processing field and processing distance 2x basic tool Tool coding with transponder Hold-down/clamping system for holding a mask with absolute path measuring system With pneumatic clamping system for path-controlled pressing of one welding part at a time Pneumatic air shower to protect the lens body Microbox PC427B incl. RTX (Siemens) Pre-installed Siemens S7 software PLC Profibus, Profinet, Ehternet, RS232 interface 15" touch panel for operating and entering data/parameters Machine lighting Connection flange for on-site fume cupboard Machine data: Dimensions: Machine W x D x H: approx. 2330 x 2350 x 2500mm Control cabinet: Firmly bolted to the machine frame Space requirement BF x DF: 5400 x 5400mm Technical Data: Power supply: Number of phases/rated voltage 3x400V 50Hz Connected load 5KVA Back-up fuse: 16A Exhaust air: Nominal diameter ∅160 Air volume 500-1000 m³/h Weight approx. 2000 kg Type: K3633/023 Condition: second-hand / used (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, *Available from approx. end of 2025* Fully automatic finger jointing line for the following dimensions: Thickness: approx. 24 – 100 mm Width: approx. 80 – 240 mm Finger jointing length: 400 – 1,500 mm Finished length: 2.50 m – 13.50 m continuously variable Consisting of the following system components: - SMB vacuum destacking lengthwise with 2 lifting tables and 2 package roller conveyors, built in 2013 Package dimensions max. 1.20 x 1.20 x 6.00 m 4 suction pads Sicko system Separation and infeed into roller conveyor for scanner feeding, board turner, switch for too moist, too dry, switch for B-quality, marking station or automatic operation - Bidac end-face scanner for cupping detection, built in 2013 - Brookhuis moisture measurement FMI 5 Year of manufacture 2019 - Microtec scanner Goldeneye 502, year of manufacture 2012 with X-ray, 4 color cameras and new optimization software - Dimter-Opticut 350-2, year of manufacture 2003 with paddle ejector, year of manufacture 2009 and associated sorting belts and pneumatic ejector for 2 additional qualities - NKT packaging - NKT finger jointing system with turntable Spezialpack AH 1050, year of manufacture 2005 consisting of: Milling machine · Tipping station · Threading section length 5.0 m · Cyclic press length 6.00 m · Cross-cut saw - SMB stacking machine, year of manufacture 1998, 2.50 - 13.50 m length, divisible into 2 units (e.g. 2 x 5.0 m) 8 stacking arms, 8 stacking tongues, manually adjustable electro/hydraulic stop, package width: max. 1200 mm, package height: max. 600 mm, hydraulic package pusher Itodpfx Asvvi Tyegzer Storage location: Customer

Condition: good (used), Year of construction: 2005, Main components: Washing machine, scanner, inspection station, gas filling press, cork applicator, automatic sealing, water treatment. The system dates from 2005, except for the washing machine (1992). Iedpfx Aex Dtq Isgzotr The brushes are in perfect condition. Total length of the system: approx. 43.8 m. Condition: good, second-hand

Year of construction: 2025, condition: new, working width 1000 mm workpiece width - max. 0,5 - 50 mm sandingbelt width -- mm weight of the machine ca. 2,5 t With the SBM-L 1000 G1S2, which works in the dry process, in alternating operation Steel, stainless steel and aluminum can be machined. She deburrs and rounds the edges on the outer and inner contours of punched, laser, fine plasma or water jet cut workpieces with a thickness of up to 50 mm on both sides in just one operation. * Two sanding units, 1 each on the top and bottom, remove spatter and slight burrs on outside and inside edges of sheet metal. * A total of four sanding belts, 2 each on the top and bottom Underside, process the sheets on both sides at the same time. here All edges are softened or rounded, depending on the tool settings. * Machining on both sides saves time-consuming turning of the workpieces and edit twice. * All pairs of aggregates can be switched on/off separately depending on the application as well as to be set. * Including Siemens S7 control: - Easy and comfortable operation through intuitive user interface - High operating security through 3 password-protected user levels - Integrated program memory - USB / RJ 45 interface for data exchange or connection of external Components (e.g. barcode scanner) - Direct entry of material thickness via touch panel - All axes automatically adjust to preselected material thickness - Standby position for deactivated aggregates - Service-friendly (e.g. plain text error messages) consisting of: - Grinding machine SBM-L 1000 G1S2 (kit) - 4x sanding belts SBM 1000 with bar P60 SiC - Sanding belt SBM-L 1000 L=3125 B=70 P80 Cubitron 2 784F - SBM-L tool wear compensation Siemens S7 - DDE 3002 dry suction - Standard piping DDE 3002 / WDE 3002 for SMD 123, SMD 133 Isdpfx Aeuia Dqsgzjtr Further detailed technical data on request. The machine is in stock Niederlangen available immediately.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 12200991016, rotational speed (min.): 24,000 rpm, overall weight: 1,635 kg, tool weight: 2,900 g, input voltage: 400 V, For economical and efficient machining of aluminium, plastic and thin-walled steel profiles All machining processes such as milling, drilling and thread cutting take place on a stationary profile, protecting the profile surface Improved work results thanks to the use of intelligent control technology Fast positioning of the machining unit at up to 60 m/min thanks to the use of dynamic servo drives Thread cutting without compensating chuck Automatic clamp recognition and positioning Automatic tool magazine with four tool shelves (without tools) Modern, 3-axis control Ergonomic work thanks to the use of a modern inclined bed No need for a reference movement of the axes thanks to the use of absolute encoder-based systems Collision avoidance thanks to automatic clamp recognition and positioning Power-Torque milling motor with closed speed control ensures short start-up and deceleration times spindle Certified, drive-integrated safety functions Low power consumption thanks to intelligent control technology Increased energy efficiency thanks to the connection of axis drives between circuits Uninterruptible power supply (UPS) Windows operating system Ijdjwgmyqjpfx Agzotr 15.6" Panel PC, i3 processor, USB ports and network interface Easy and convenient program entry via eluCam on the operator panel, even during machining Remote online maintenance Machine equipment Air-cooled 8 kW milling spindle, S1 Cabin for operator protection Four horizontal pneumatic clamps for clamping the material Material stop, left side HSK-F63 tool holder Minimum quantity lubrication High-performance coolant Manual control panel Depth gauge Options Tools Tool holders Automatic tool magazine for up to four standard tools Automatic tool magazine for angle head Rotating head HSK-F63 angle for two tools Green-line cooling unit for control cabinet with reduced energy consumption Barcode scanner Protective cabin, optionally with all-round closure Four clamps as standard. Expandable to eight clamps Right reference material stop for placing workpieces with overlength processing Additional stop for overlength processing on the left Length measurement on both sides Double clamp and additional accessories upon request Panel PC 18.5", i5 processor Panel PC 21.6", i7 processor Note holder Sound-absorbing hood Chip disposal using chip trays

Condition: like new (used), Year of construction: 2021, operating hours: 300 h, Prices upon request XG x 2800 5x Ca E200L 4x CA Dc 40 e The system was used for only 90 days and is in as-new condition. The XG-X2800LJ is a 2D/3D laser profile sensor from the LJ-V7000 series by KEYENCE Germany. This advanced image processing system offers enhanced features and flexibility for demanding inspection applications. Technical Data: Laser Scanner / Profile Measurement: The XG-X2800LJ is specifically designed for profile measurement and 2D/3D image processing. Compatibility: It is compatible with line-scan cameras, LJ-V sensors, and 21-megapixel cameras. Flowchart-Based Programming: The XG-X is intended for advanced users, enabling programming in a flowchart style. Isdpfxer Rddzj Agzstr Manuals and Software: User manuals and software are available for configuration and customization via PC, as well as for remote control and capturing images and results on a PC. Please note that any shown accessories are for illustrative purposes only and may not be included with the product. For more information, please visit the official KEYENCE website. If you have further questions or require assistance, I am happy to help!

Condition: used, CEM CEM Smart 5 Turbo Model 907990 Professional Microwave Moisture Analyzer for Moisture and Solids Analysis Reliable Laboratory Analytics in Record Time The CEM Smart 5 Turbo is a state-of-the-art microwave drying system for rapid and precise determination of moisture and solids content in a wide range of samples. Ideally suited for applications in the food, chemical, pharmaceutical, and environmental industries, this device saves significant time while maintaining consistently high measurement accuracy. Product features: Turbo technology with Intellitemp™ – Optimal temperature control prevents burning or crust formation on the sample. Fast analysis times – results within 60–180 seconds High precision – measurement range from 0.1% to 99.9% moisture or solids Versatile – suitable for solids, pastes, sludges, and liquids User-friendly touchscreen operation Interfaces – RS-232, USB, LIMS-compatible Typical applications: Cheese, dairy products, meat Paints, coatings, plastics, polymers Sludges, wastewater, organic residues Creams, pastes, emulsions Technical Data – CEM Smart 5 Turbo Feature Device type: Microwave moisture analyzer / moisture analyzer Technology: Microwave drying with Intellitemp™ temperature control Moisture range: 0.1% – 99.9% Sample types: solids, liquids, pastes, sludges, emulsions Analysis time: typically 1–3 minutes Drying method: direct microwave radiation (non-rotating) Temperature control: automatic (microwave-controlled, no fixed °C value) Weighing unit: Optionally connectable external scale (resolution up to 0.001 g possible) Display / Operation: color touchscreen, intuitive menu navigation Iodjwv Ryyspfx Agzotr Data interfaces: RS-232, USB, network (LIMS-compatible) Documentation: Barcode scanner & thermal printer (optional) Power supply: 230 V / 50–60 Hz Dimensions (W × D × H): approx. 41 × 44 × 37 cm Weight: approx. 18 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and information!) If you have further questions, we will gladly answer them by phone.

Condition: used, Year of construction: 2009, Automatic central lubrication Milling unit 7833 2-stage, 11 kW power 1000 - 24000 rpm 1 double drilling spindle in X-direction 1 integrated sawing unit for sawing / grooving in X-direction, traveling Tool changer 7892, 16-way Linear Pick-up changer, permanently installed on the right-hand side of the machine Laser pointer consisting of 2 laser pointers for positioning the vacuum suction cups or tracing the workpiece contour Automatic console - suction cup positioning 6 consoles including 3 suction cup holders per console including 1 vacuum suction cup 80x80 mm per suction cup holder including 4 feeding aids Additional processing fields at the front for 6 consoles Basic unit pneumatics for frame clamping system 7974 (6 consoles) 2D barcode scanner Video camera in the processing head Vacuum pump 140 m³/h Vario tool Change changing unit package consisting of Consists of: Vector axis 7899 (C-axis), fully interpolating, 0-360° continuously rotatable, including pneumatic tool changer 7890, single-slot magazine pick-up system, permanently installed in front of the machine frame on the left. Tool changer 7894, 6-slot pick-up magazine specifically for Vario Tool Change tool holders, permanently installed in the machine frame on the left, can be equipped with a Vario Grip KSJ F 40 collet chuck, 3 Vario Grip KSJ F 40 tool holders (for 2-20 mm ER32 collets), 1 saw blade holder, 3 collets according to customer selection, 1 carbide circular saw blade, max. 220 mm diameter. Storage location: Nattheim Itsdevvi Spopfx Agzjr

Condition: like new (used), Year of construction: 2017, Laser System Mercury SEI Giotto I-SCAN – used / as-new condition For sale: Mercury SEI Giotto I-SCAN laser machine This system is ideally suited for precise engraving applications in industry and trade. Technical data: Type: Mercury SEI Giotto I-SCAN Laser processing system with I-SCAN technology High-precision processing of various materials (e.g. plastic, wood, acrylic, paper, textiles, and more) Suitable for engraving Isdpfx Agjw Rp Udjzjtr Robust construction, reliable operation Condition: as new / fully functional Immediately ready for use, including setup and aluminium frame (programmable sliding table with enclosure – Laser Class 4) Including SICK safety laser scanner Inspection & Test: On-site inspection by arrangement possible. Laser power: 300W Includes Icaro Backlight software

Condition: used, This listing is for Illumina Array BeadXpress DNA Bead Array Reader Illumina’s new BeadArray Reader simultaneously scans Sentrix Arrays at two different wavelengths with a resolution of less than one micron. A scan of 96 hybridized samples in an Array Matrix, representing data acquisition from over 4.5 million discrete beads, takes less than 90 minutes. This represents the highest throughput of any scanning platform used for microarray-based genetic analysis applications. The BeadArray Reader offers broad dynamic range, high sensitivity, and a low limit of detection. These metrics are particularly important for users planning to study gene expression and other applications that are supported by BeadArray technology and that demand high scanner performance. Can be refurbished on request, refurbishment not included in price. Ijdpfx Agsxzh Ayszstr

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 17,000 h, Trumpf TruMatic 6000 FMC -1300 Sheetmaster + Gripmaster Manufacturer: Trumpf Type: TruMatic 6000 FMC -1300 Year of manufacture: 2006 Condition: used, very good. Regularly serviced by Trumpf. Machine is powered and in use. Operating hours NC hours: 70,305h Beam-on hours: 17,217h Control: Siemens Sinumerik 840 D Punching force: 220KN Laser power: 2700W Working area for laser operation approx.: 2585 x 1280 mm Working area for punching operation approx.: 2585 x 1370 mm Max. sheet thickness approx.: 8 mm Support tables Brush tables CE marking Standard equipment: Stable, easily accessible C-frame Coordinate guide with integrated linear magazine, 21 places for tools and clamping claws 1 clamping claw Maintenance-free three-phase servo motors Parts chute 500 x 500 mm (sensor-monitored) HI-LAS high-pressure cutting TRUMPF laser: CO2 laser TLF 2700 High-frequency excitation Laser control TASC 3 Cutting head: Laser cutting head 5″ Laser cutting head 7.5″ Quick change device Cutting gas pressure setting programmable Distance control DIAS Itjdpfxjxwmuao Agzer ContourLas Punching head: Hydraulic mono tool holder 360° rotation Programmable hold-down device Tool spray lubrication Punching slug extraction Control: Sinumerik 840D 10.4″ TFT color screen Teleservice Automatic switch-off 3.5″ floppy disk drive RJ45 network connection MDE interface Safety: Multi-beam light barriers Quick switch-off hydraulics Compact dust extraction system Options: Automatic switch-off Thread former Soft punch Adaptive stroke calibration Adjustment cylinder Individually openable claws Chip conveyor with container Multishear Multitool Control Brush tables Automation SheetMaster (loading and unloading during production) Scissor lift table Chip conveyor with container TrumaGripMaster TrumaSortmaster R4 TwinCarts (unloading) Spreading magnet Rotor scanner (unloading monitoring) Autolas Plus Remaining grid pallet 2500x1250mm

Condition: like new (used), Below you will find the complete equipment of the offered machine, structured clearly and presented in an organized manner. ⸻ Material Handling & Safety • Work area lighting, rear • 2D code scanner Material Handling • Support console with plastic overlay • 3× ball roller supports (for bending aid / support console / table extension) • 3× brush supports (for bending aid / support console / table extension) • Bending aid first arm with plastic overlay • 2× table width extensions with plastic overlay • 3× table length extensions (for bending aid / support console / table extension) • Parking position right 900 mm Safety • BendGuard ⸻ Automation – ToolMaster (KB29) Machine Base • Stable steel architecture with concrete foundation • Upper tool storage with CNC rotary axis • Lower tool storage with CNC rotary axis • Push-chain manipulators for upper and lower tools • Magnetic gripper system • Position monitoring • CNC turn-over and transfer station for upper tools • Transfer station for lower tools • Right-side machine placement • Control cabinet climate control for ambient temperatures up to 40°C Control • LENZE, integrated into TruBend machine control Safety Equipment • Light curtain (vertical & horizontal) with fixed reflector • Communications rail • MobileControl • Standard safety devices • Side sliding doors • Rear rolling shutter ⸻ Standard Machine Equipment Machine Construction • Robust machine frame • Press beam • Spherical support for press beam with tilt functionality • On-demand servo drive (4-cylinder technology) • Length measuring system (Y-axis) with dynamic deflection compensation • Hydraulic oil fill (lifetime fill) • Control cabinet climate control for temperatures up to 40°C Crowning • Manual wedge crowning Backgauge • 2-axis backgauge (X & R) • 2× backgauge fingers Tool Clamping • Manual upper tool clamping • Hydraulic lower tool clamping Lower Tool Movement • Pneumatically actuated I-axis Control • Touchpoint TruBend • Integrated TRUMPF technology data • Support arm with height adjustment • Network capability • Teleservice via Internet Operator Ergonomics • Foot switch ⸻ Extended Machine Equipment Increased Performance Features • Increased installation height/stroke: +230 mm • Increased working speed at maximum press force Crowning • CNC-controlled crowning Backgauge • 6-axis backgauge Tool Clamping • Hydraulic upper tool clamping Iedpfx Agjx Aphgezstr Lower Tool Movement • CNC-controlled I-axis Control / Operation • Keyboard & mouse (incl. holder) • Additional monitor • Shop floor programming: TecZone Bend Angle Assistants • ACB Laser – Automatically Controlled Bending • Angle assistant package (ACB Wireless + TCB) Other Operator Aids • MagicShoe function (incl. initial equipment) • MobileControl Pro • Tool indicator • Front work area lighting

Condition: excellent (used), 3D systems Here we offer you a 3D printer. Solid-state Nd: YVO4with triple frequency Wavelength: 354.7nm Nominal power at the laser head: 1450 mW (1000mW at the resin surface under standard conditions) Zaphyr TM coating system: Process: Replaceable coating agent Adjustment: Self-leveling and self-correcting Production layer: Minimum 0.05mm Maximum 0.15mm ProScan™ scanner Edge detection (diameter at 1/e2): Nominal in standard mode 0.13mm Itodpfx Aonkalgsgzor Detection of large lines Nominal: 0.76mm Maximum drawing speed Edge detection: 3.5m/sec. Detection of large lines: 25m/sec. Build volume capacity: RDM 750F: 650mm x 750mm x 550mm; 414l Maximum part weight: 75kg Power supply: 200-240VAC (alternating current), 50/60Hz single-phase, 30A Ambient conditions Temperature range: 20-26°C Max. permissible fluctuation: 1°C per hour Relative humidity: 20-50%, non-condensing Space requirement: Size (WxDxH), unpacked: 1260mm x 2200mm x 2280mm Weight packed (no RDM): 1590kg Type: iPro 8000 Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2003, The Macchi 3-Layers is a high-capacity blown film co-extrusion line intended for production of general-purpose films with high width and output demands.It processes LLDPE, LDPE, mLLDPE, MDPE, HDPE, and in upgrade configuration also PP.The system uses a 700 mm 3-layer die head and reaches an output capacity of up to 900 kg/hour, depending on formulation. EXTRUSION GROUP: • Extruders: 80 mm + 100 mm + 80 mm • Infrared heating • Hydraulic screen changers Detailed upgrade specification: • One extruder Plastex 100/30D (middle layer B) • Two extruders Plastex 80/30D (layers A and C) • Bimetallic barrels • Nitrided screws • Water-cooled grooved feeding sections • 5 heating zones with IR heaters and blowers • Motors: - 150 kW DC motor (100 mm extruder) - 100 kW DC motors (80 mm extruders) • AC motor application with digital control (IP55) for reduced energy consumption and harmonic distortion DIE HEAD: • Model TE505 • 700 mm die diameter, die gap 1.8 mm • 4+4 heating zones with ceramic heater bands (19 + 35 kW total) • Mounted on a die cart with integrated air distribution manifold • Insert range 600–800 mm • Equipped with IBC system COOLING SYSTEM: • Dual-lip carbon fibre Karat air ring (K-Design) • ASR4 Double Flux Cooling Ring, blower 15 kW • Jet-7 IBC cooling control system - 15 kW introduction blower - 18 kW extraction blower - Bubble diameter sensor - Air balancing valves - Variable-speed inverters TAKE-OFF UNIT: • Take-off width: 3200 mm • Oscillating nips • Optional tower-mounted secondary nip with load-cell control Itjdox Akywjpfx Agzjr WINDING SECTION: • Double automatic back-to-back winder • Automatic roll change • Maximum winding width: 3150 mm FILM SPECIFICATIONS: Film width range with 700 mm die: 2000–3100 mm Thickness: 15–200 μm Output example: 3000 mm width, 100 μm LDPE → 800 kg/h ±10% LINE SPECIFICATIONS: Installed power: 550 kW, 415 V, 3-phase + neutral Screw speeds: 80/30D extruders: 0–130 RPM 100/30D extruder: 0–120 RPM Cooling water consumption: 6 L/min Compressed air requirement: 6 bar ADVANCED CONTROL & MEASURING SYSTEMS: • Doteco gravimetric dosing system Grado • Thickness profile systems (EC Plus modules): - S2 Automatic Die Control - S3 Rotating Capacitive Thickness Scanner - S4 Track Scanner - Q1 Serial communication (extruder/gravimetric values) - Q11 Printer module - Q12 Online modem diagnostics - Q7 Power consumption monitoring • K-Design VARIOcool automatic thickness control • Kundig reversing ring and thickness measurement AUXILIARY EQUIPMENT • Tower • E+L web guiding system • Corona treater AFS or 2800 station • Calibrating basket with optional supporting basket • Bubble guide GSRC 3200 (6 levels, motorized, IBC-linked) • Micro-perforation system (FBF cold needle) • Air shafts (8 pcs)

Condition: used, Year of construction: 2014, functionality: fully functional, number of ink cartridges: 4, color channels: CMYK, input voltage: 220 V, Equipment: auto duplex, brochure finisher, raster image processor, RISO COMCOLOR 7150. It is on a very good condition . Print heads has no lines , it comes from a general maintained. Isdpfsx E T Tuox Agzjtr It comes with MULTIFUNTIONAL FINISHER , SCANNER and a controller IS950C. Inks are about 60-70%. General: - The device is excellent, in full working function. All its systems and print head are working perfect. No lines. - A general technical service take place few weeks ago. - we can ship it worldwide, after secure its systems inside and store it on a 1 standard europallets 80cm X 120cm. - For EU countries we can issue zero VAT invoice. Please ask for quotation. - For non EU countries please ask for quotation. For any other information, you also can contact us.

Year of construction: 2023, operating hours: 10,700 h, condition: like new (used), functionality: fully functional, Build Cylinder Size: 2x 400x400x520 mm Scanning Speed: 15,2 m/s Scanner: High-precision three-axis digital galvo system Laser: CO2 Laser, 1×100W Max. Chamber Temperature: 190°C Gewicht: ca. 3.000 kg incl. 260kg FS3300 Powder incl. Chiller Itsdpfx Ajn Dxbyjgzjr incl. N2 Generator incl. Breackout Station

Year of construction: 2025, operating hours: 10 h, condition: new, functionality: fully functional, overall weight: 800 kg, total length: 120 mm, total width: 900 mm, total height: 1,900 mm, laser power: 30 W, laser wavelength: 1,064 nm, type of input current: AC, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 Itodpfjxuvk Eox Agzjr - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, load capacity: 20 kg, TECHNICAL DETAILS Robot payload: 20 kg EQUIPMENT Floor scanner Ijdpfsxt H Daex Agzotr Lift table

Condition: used, Trumpf TruDisk 4002 (6 C) High-Power Solid-State Disk Laser with up to 4 kW The Trumpf TruDisk 4002 (6 C) is a state-of-the-art, efficient, and robustly built disk laser optimized for demanding industrial metalworking applications. Machine type: TruDisk 4002 (6 C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: March 2016 Drawing number: 20-10-03-A204 No further testing was conducted in-house. Operating hours could not be read. The laser was operating flawlessly up until decommissioning. Features: - Top performance (up to 4 kW) - Excellent beam quality - Reliability & reflection safety - Energy-efficient, modular architecture - Ideal for a wide range of applications in the automotive industry, mechanical engineering, or surface processing Technical Highlights: - Power: From 80 W up to max. 4000 W in continuous operation (CW) - Wavelength: Approx. 1030 nm (Infrared, Yb:YAG) - Beam quality: Up to 2 mm·mrad (benchmark for exceptional quality), often with a range of 2–25 mm·mrad - Output options: Modular configuration – up to 4 outputs possible (depending on series) - Optional cooling: Water-cooled, e.g., via KLH chiller or integrated heat exchanger/compressor - Modular design: Robust optical layout, efficient operation, power factor correction, energy-saving modes, PROFIenergy interface Typical Applications: - Laser welding (including hybrid or scanner-guided), e.g., for bodywork or gearboxes - Cutting / flame cutting of metals with high precision - Surface processing, coating applications, etc. – professional industrial use Supply voltage: 380 V (-10%) to 460 V (+10%), 3-phase AC + PE Frequency: 50 – 60 Hz Power consumption: 22 kW / 23 kVA Rated current: 325 A at 400 V Protection class: IP54 Short-circuit resistance: Icn / SCCR 50 kA Weight: 850 kg Itjdewzabqjpfx Agzjr Condition: Used Scope of delivery: (See images) (Specifications subject to change and errors excepted!) Should you have any further questions, feel free to contact us by phone.

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, warranty duration: 18 months, input voltage: 240 V, measuring range X-axis: 250 mm, measuring range Z-axis: 320 mm, overall weight: 100 kg, feed length X-axis: 250 mm, feed length Z-axis: 320 mm, Equipment: type plate available, Modular extensible base basic Contour measuring system with down-direction Z-Scanning Anytime optionally via software updatable functions: - Up down measurement - Roughness measurement - Motorized Y-Supporting table - QR-Code Scanner (for tracingarms and reference files) - data export to QS-Stat (dfq file) - dominant waveness Scope of supply: - Basic mechanics with integrated Y-adjustment table (17mm way) - Integrated control system - ConturoMatic Software; manual Itodpfx Agjxgqlhszer - PC W11/64Bit; 24"TFT flat screen; - Protective cover, sturdy and water repellent (material), Commodity-Code 63079098 Technical data: Measuring range 250mm Measuring range 320mm Resolution 1nm Sensing system optically incremental Inaccuracy +/-(0,9µm+L/100)µm* [L=mm] Measuring speed 0,1-3mm/s self-optimizing Positioning speed up to 25mm/s Gauging force regulation Table load 35kg Granite precision guides Weight 95kg

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: AC, laser power: 20 W, total width: 605 mm, total height: 1,080 mm, total length: 350 mm, overall weight: 40 kg, warranty duration: 12 months, The mobile laser LAS 23 portable is characterized by its compact design. Small, handy and with custom-made attachments that can be individually exchanged in the quick-change system. With its mobile base, it can be moved to the workpieces to be marked. This makes it suitable for small, large and heavy workpieces. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Made in Germany - Fiber laser 20W (optional: 30 Watt, 50 Watt) - Laser class 1 - CE compliant, according to EU directives - Wavelength 1064nm - Marking field size 70x70mm (optional: larger) - Signal lamp for indication of operating status - marking software EZCAD - Connection 230V - Air cooled - Laptop with Windows operating system - Dimensions: 350 x 605 x 1080mm (LxWxH) Itjdpfsxuqxqex Agzer - Weight: approx. 40 Kg - weight of portable laser unit 2,8 Kg - Fiber optic cable approx. 2,50 m - Extraction optional

Condition: used, Trumpf TRUMPF TruDisk 4002 (4 C) High-Performance Solid-State Disk Laser with up to 4 kW Output Type: TruDisk 4002 (4 C) The TruDisk 4002 is a powerful, energy-efficient, and modular laser solution – ideal for industrial manufacturing environments with demanding requirements for quality, precision, and automation. The combination of high power, excellent beam quality, and smart factory features makes it particularly attractive for modern production lines. System type: TruDisk 4002 (4C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: May 2012 Drawing number: 20-10-02-A3* No additional tests were carried out in-house. Operating hours could not be read out. The laser operated flawlessly until decommissioning. Technical features: Output & wavelength: 80–4000 W at 1030 nm Iedpfxewzahde Agzotr Beam quality (BPP): typically 2 mm·mrad (up to 25 mm·mrad, depending on configuration) Modular & compact: footprint < 1 m², modular design simplifies maintenance/service Efficient energy & cooling systems: energy-saving modes, active power factor correction, pulse function to reduce consumption Flexible cooling: integrated heat exchanger (5–28 °C), optional with compressor (up to 38 °C inlet temperature) Reflection-resistant: special resonator design also suitable for highly reflective metals Industry 4.0 capable: extensive sensor technology and data interfaces for condition monitoring, OPC UA, predictive maintenance Application areas: Scanner & hybrid welding (e.g. automotive body manufacturing, shipbuilding) High-speed cutting, including on reflective metals Flame cutting & surface processing Laser cladding, hardening, deep penetration welding where high precision is required Technical data: Supply voltage: 380 V (-10%) to 460 V (+10%), 3AC + PE Frequency: 50 – 60 Hz Power consumption: 23 kW / 25 kVA Rated current: 34 A at 400 V Protection rating: IP 54 Short-circuit strength: Icn / SCCR 50 kA Weight: 850 kg Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) We would be happy to answer any further questions by phone.

Condition: used, Trumpf Trumpf TruDisk 4002 (6 C) High-Power Solid-State Disk Laser with up to 4 kW The Trumpf TruDisk 4002 (6 C) is a state-of-the-art, efficient, and robustly engineered disk laser optimized for demanding industrial metalworking applications. System type: TruDisk 4002 (6 C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: March 2016 Drawing number: 20-10-03-A204* No further in-house inspection was performed. Operating hours could not be read out. The laser was operating flawlessly until decommissioning. It offers: - Top performance (up to 4 kW) - Excellent beam quality - Reliability & reflection safety - Energy-efficient, modular architecture Ideal for diverse applications in the automotive industry, mechanical engineering, or surface processing. Technical Highlights: - Power: From 80 W up to max. 4000 W in continuous operation (CW) - Wavelength: Approx. 1030 nm (infrared, Yb:YAG) - Beam quality: Up to 2 mm·mrad (a benchmark for excellent quality), typically ranging from 2–25 mm·mrad - Output options: Modular configuration – up to 4 outputs possible (depending on model) - Optional cooling: Water-cooled, e.g. via KLH chiller or integrated heat exchanger/compressor - Modular design: Robust optical configuration, efficient operation, power factor correction, energy-saving modes, PROFIenergy connectivity Typical applications: - Laser welding (also hybrid or scanner-controlled), e.g. bodywork or gear assemblies - Cutting / flame cutting of metals with high precision - Surface processing, coating applications, etc. – for professional industrial use Iodowzaiuspfx Agzstr Supply voltage: - 380 V (-10%) to 460 V (+10%), 3-phase + PE - Frequency: 50 – 60 Hz - Power consumption: 22 kW / 23 kVA - Rated current: 32.5 A at 400 V - Protection class: IP 54 - Short-circuit strength: Icn / SCCR 50 kA - Weight: 850 kg Condition: used Scope of supply: (see picture) (Subject to modifications and errors in technical data and specifications!) We are happy to answer further questions for you by phone.

Condition: not inspected (used), Bluhm Systeme marking lasers Here we offer you a Bluhm Systeme marking laser. Isdoq Rtz Hopfx Agzstr Bluhm Systeme marking laser fiber laser e-SolarMark FL Without function guarantee (untested) Introduction: The e-SolarMark FL10W and 30 W are class IV lasers in accordance with the lEC 825 and EN 60825 (standards for end-user applications). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a protection class product in accordance with the above-mentioned directives. The e-SolarMark is a laser system for marking and engraving plastics, metals and foils while stationary or in motion. Technical specifications e-SolarMark description The e-SolarMark system consists of two main components: 1. the marking unit with laser head (scanning head) with focusing lens. 2. the control unit contains the power supply unit, electronic control system and firmware for the system function, I/O slots inside. The e-SolarMark includes a fixed galvo scanning head equipped with a lens for a square marking field with standard dimensions of 70 X 70 mm Laser specification in standard version Laser Type---Fiber Laser Laser output power---FL2 model: 19W; typical Wavelength---1062 nm typical Internal Modulation---20 to 80 kHz Scanner Head Description: Scan Head---Two galvanometric mirror scanners with hard, highly reflective dielectric coating. F-Theta Lens types and their characteristics: Lens marking field 70x70 mm to 300 x 300 mm Focus distance B 192 mm Working environment Conditions: Relative humidity up to 80% non-condensing Operating temperature 5 - 40°C Recommended operating temperature 15-25°C Dimensions W x H x D Laser unit 122 x 108 x 495 mm Control unit 520 x 380 x 215 mm Cable length marking/control unit 3 m Weight marking unit 5 kg Weight of control unit 15 kg Mains voltage 115/230 VAC. 50/60 Hz, single-phase. Power consumption FL2 model 450W Type: e-SolarMark FL Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: like new (used), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Optics Wavelength Range (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W at 9400 nm, 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics Number of Installed Tunings: 1 Typical Tuning: Fast-Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Deflection): Itedpoxp Iybsfx Agzsr 1% Full Deflection: 1.0 ms 10% Full Deflection: 4.5 ms Accuracy: Repeatability (RMS): < 4 µrad Max. Positioning Resolution: 18 Bit for XY, 16 Bit for Z* Nonlinearity: < 2.1 mrad / 44° 8-hr Drift (after 30 min): Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner, digital controller card Control Interface (alternatives): Digital SL2-100 Advanced Diagnostics: Yes (iDRIVE) Power Supply: (48±2) V DC, max. 10 A each (20 A peak current) Mechanical Scan Axes: 3-axis system with integrated varioSCAN Housing Variants: Scan head Connector Positions: Opposite to beam exit Weight without Lens (standard housing): 35 kg Dimensions (L x W x H, standard housing): (433 x 268 x 266) mm (with varioSCAN) Beam Offset: 72.72 mm Other Features Water cooling: Yes Air cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See picture) (Technical data subject to change. Information may contain errors!) Shipping & Collection: Secure pallet shipping (by arrangement) or local pickup possible. For further questions, we will be happy to assist you by phone.