Laser scanner

Leica BLK3D

Condition: excellent (used), Year of construction: 2018, operating hours: 1,020 h, functionality: fully functional, For sale: Nesting machine from Holzher with very few operating hours and top equipment! Manufacturer: Holz-Her Model: Nextec 7707 Year of manufacture: 2018 Weight: 4980 kg Operating hours: 1020 Processing length X: 3100 mm Processing length Y: 2200 mm Vector speed: 110 m/min Equipment: Milling unit: 12 kW, air-cooled, 1000–24000 rpm Drilling unit (XL drilling head): 24 spindles (18 vertical, 6 horizontal) including saw unit in X-direction (grooving in X-direction) Angle gear: e.g. Lamello P-System Workpiece support: High-Flow nesting table with continuous vacuum area, 16-zone vacuum controlled by software Safety device: light barrier Workpiece clamping: 2 × 140 m³/h vacuum pumps, low-maintenance dry-running, additional 250 m³/h dry-running vacuum pump Tool changer: 10-position pick-up changer integrated in the machine frame, 1-position X/Y pick-up changer with tool cover NEXTEC module: CabinetSelect Kjdpswtiq Sefx Agzjnf DirectCut: line laser in X/Y-direction, incl. software Software: CAMPUS software machine license included, aCADemy CAD/CAM module and CabinetControl Base, “Warehouse” software module, Production software module, BetterNest free-form nesting

Year of construction: 2024, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Kodpfx Agsqfcviszonf Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: excellent (used), Year of construction: 2007, Lot of 36 pillar cranes Lifting capacity 500 kg to 2000 Kg Price 89.000 Euro Kjdpfx Asl R Izbsgzsnf

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Ksdpoqt Dmyofx Agzonf Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Year of construction: 2006, condition: good (used), Power generator, emergency power generator, generator, power generator, power generator, emergency power generator -Electric start -Power: 3.8 kVA 50 Hz -petrol engine -only: 95 operating hours -2x Schuko: 230 Volt, 1 socket slightly damaged Ksdpfx Ajflmm Sogzonf -Dimensions of unit: 580/530/H615 mm -Weight: 79 kg

Condition: used, length:1800 mm width:1200 mm Kodpfx Aocxxu Dogzonf weight of the machine ca.:1,6 t dimensions of the machine ca.:1,8 x 1,2 x 0,4 m

Year of construction: 2025, condition: new, The manual length stop with hand wheel and electronic dimension display MD 50 h is ideal for frequently changing section lengths and for stopping long materials. A hand crank enables the carriage to be moved quickly and precisely. Knodpfx Agoidln Tozsf

Year of construction: 2022, condition: new, Load capacity: 10.000kg Speed: 0.03- 1.6 rpm faceplate diameter: 1.500mm, expandable to 2.500mm welding current transmission: 800A Knodpfxjfxgp Uj Agzsf

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 302827, Federhenn rod-profile machining center (drilling and milling) SBZ 100G - TO BE SOLD IN LINE WITH 1 SCHIRMER NC-SAW 1000-G4 YEAR 2014 (COMPLETE LINE) SEE SCHIRMER ADVERTISMENT....!! NC feeder device with gripper max 200 m/min - max profiles 3500 mm.. The gripper can be adjusted pneumatically in 2 axes for adaptation to different profile geometries. Machining station designed as a G-module with 2 servo axes in Y and Z direction. Prepared for accommodating up to 14 processing units for complete processing of PVC, frame, post and frame profiles - outfeeder with table 2500x1500 mm.. PC-control C 6140, display, software SBZ 100G, PLC+NC. Modem remote diagnosis. Loading magazine with 9 places (9 profiles 3500 mm) designed for frame profiles max 127 mm width. Barcode scanner - Horizontal belt conveyor with 9 transport beams that can be adjusted continuously. 18 m/min - 3000 x 2400 mm - units: screw unit, 2 x drilling unit for dowel or post holes, 2 x drilling unit for fixing holes 16,750 rpm, 2 x additional processing (marking the closing part), drilling unit for front door fittings (opens inwards), drilling unit for olive hole drilling (3 sp), milling unit lock case. 2 pcs milling unit for milling and drilling drain slots and ventilation holes. 1 ditto obliquely arranged. 1 swivel device (MD and AD window systems. Milling unit for milling PZ and handle hole pattern Kodpfxownpa Nj Agzjnf

Condition: new, Year of construction: 2025, container length: 7.2 ft, color: white, overall weight: 600 kg, maximum load weight: 600 kg, empty load weight: 600 kg, loading space volume: 6.6 m³, loading space width: 1,200 mm, loading space length: 2,400 mm, loading space height: 2,500 mm, machine/vehicle number: Sanitärcontainer WC-WC, Equipment: bathroom, shower, Sanitary container | WC container | Shower container | Toilet container | Double WC container | 120cm x 240cm | Model WC-WC | Double WC container | High-quality and flexible solution Available products can be viewed and collected directly from our warehouse. Our office, residential, and sanitary containers offer an excellent solution for a wide range of applications. They are characterized by outstanding quality, highest flexibility, and short delivery times. Technical details: Dimensions: • Length: 240 cm • Width: 120 cm • Height: 250 cm • Weight: 400 kg Insulation: • Ceiling/wall: 5 cm PUR (polyurethane) • Optional: 10 cm insulation with PUR, PIR, or rock wool available • Floor: 16 mm fiber cement board + RAL 7015 colored, "seamless" epoxy resin floor coating • PVC covering Knjdpfx Agevv Ra Uszof Equipment: • 2 mm thick galvanized steel sheet • RAL 7015 colored, seamless epoxy resin floor coating • 2× rooms • 2× exterior doors • 2× WC with washbasin • 2× ventilation • Frameless, modern mirror • Metal toilet paper holder • Metal soap dispenser Colors: • Facade color: RAL 9002 • Frame color: RAL 7016 • Customization: Individual design possible according to customer wishes High-quality workmanship for long-term use Stock & delivery: • Stock items: shipped the same day • Not in stock: production time depending on model 2 to 4 weeks • Worldwide shipping: We offer professional shipping to all countries to ensure fast and reliable delivery. • Individual sizes: products can be manufactured according to the specific requirements of the customer. Showroom address: Im Mannenberg 9a, 53557 Bad Hönningen For more information or customized adaptations, we are happy to help!