Used Curve for sale (717)

Condition: used, mileage: 231,540 km, power: 316 kW (429.64 HP), first registration: 11/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Well-maintained MAN TGS 26.430 with approx. 6.10 m platform body for scaffolding/timber construction, with ADR for gas transport, 6x2/4 drive with steered front axle, air-suspended rear axles, wheelbase 3.15m, GVWR 16.4 tonnes, 430 hp, trailer hitch, automatic transmission, mounting for forklift attachment at the rear, air conditioning, navigation system, cruise control, engine brake with 3 levels, from first owner, in excellent condition, and more. M cab, medium length with rear protective grille Euro 6 D engine with 430 hp and 2,200 Nm of torque 6x2/4 drive with LOL-08 steered, liftable front axle Unladen weight 9,535 kg Payload 16,465 kg Differential locks in rear axle Wheelbase 3,150 mm + 1,350 mm Special platform with all-round perforated rails for load securing Platform body approx. 6.10 m long and approx. 2.55 m wide, front wall approx. 1.20 meters high Mounting for a forklift at the rear Wiring for tank trucks according to ADR Dangerous goods equipment according to ADR type AT ADR inspection and certificate MAN TipMatic12 26 DD transmission MAN EasyStart with TipMatic MAN BrakeMatic ABS, ASR, ESP Disc brakes for front and rear axles Controlled rocker arm brake (EVBec) Engine brake with 3 levels Emergency Brake Assist 2 (EBA2) MAN Lane-Guard System IV Front axle leaf-sprung, rear axles air-suspended Front axle VOK-09 curved, rear axle hypoid HY-1350 Front axle load 7,500 kg, rear axle load 11,500 kg Stabilizer bar for front and rear axles HY axle ratio i=2.71 Trailer hitch Rockinger Type 400 G 150 A with air connections Duo-Matic quick coupling at the rear Trailer load with continuous braking system 26,470 kg Trailer load with SDAH/ZANH 16,000 kg Gross vehicle weight 44,000 kg Air conditioning Cruise control Sun visor 2 plastic storage boxes outside left + right Electrically adjustable and heated exterior mirrors Electric windows Dust box in the cab Driver comfort seat, air-suspended, with lumbar support, shoulder adjustment and heating Seat covers in comfort quality Radio MAN Media Truck Advanced 12 V with 7" color display MAN Navigation Hands-free functionality "Comfort" for 2 mobile phones German vehicle from first owner Very good and well-maintained condition Price NET, plus 19% VAT. We will gladly provide you with attractive financing offers. All information without guarantee. Errors and prior sale reserved. Isdsz I Hnlopfx Ap Dotn Internal vehicle number: 2621

Condition: used, maximum load weight: 33,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2024, next inspection (TÜV): 02/2027, loading space volume: 30 m³, total length: 8,790 mm, total width: 2,550 mm, total height: 3,760 mm, Year of construction: 2024, Equipment: ABS, KÄSSBOHRER V2A slurry tank semi-trailer, 30,000 liters – Type STN 30L/1 – 12/27 First registration 02/2024, from first owner Itedpfx Asz Am Evsp Djn V2A stainless steel tank Diameter 2,200 mm 3 baffle plates 1 filling dome DN500 with hinged cover 4-inch flushing line throughout the entire tank Rotary lobe pump VOGELSANG VX 186-260 Q GL, 6,000 liters/min., interchangeable housing shells Complete piping in V2A stainless steel Rotatable outlet at the rear, 6 inches, with drain device 8-inch suction port at the rear top 6x LED work lights Large hose trays on the left and right BPW axles with disc brakes WABCO trailer EBS with RSS stability program WABCO Optiturn – OptiTurn automatically detects when a vehicle enters a curve and then loads or unloads, or lifts the third trailer axle. This improves the maneuverability of the trailer in confined spaces, as the turning circle becomes smaller and tighter curves can be taken. Furthermore, it improves the turning ability when reversing. 1st axle is a lift axle Tires: 6 x 385/65 R 22.5 RENTING is the new BUYING, with us also available in full-service leasing – IMMEDIATELY AVAILABLE.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 60 mm, roller (top) diameter: 60 mm, side roll diameter: 60 mm, overall weight: 310 kg, total length: 1,300 mm, total width: 700 mm, total height: 1,260 mm, power: 0.75 kW (1.02 HP), input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, MTP ESR 1020 × 2.0 mm – Electric 3-Roll Sheet Metal Bending Machine PRICE: €1950 NET EXW European delivery available – transport quotation on request. The MTP ESR 1020 × 2.0 mm is a robust electrically driven 3-roll sheet metal bending machine designed for accurate rolling of cylindrical components, tubes, sleeves, rings and light conical parts. Iodpfxoz Hx T Rj Ap Detn Its compact footprint, rigid welded frame and hardened steel rolls make it suitable for professional fabrication workshops, maintenance departments and production facilities requiring a reliable machine for regular sheet-metal forming work. MAIN TECHNICAL DATA • Working length: 1020 mm • Maximum sheet thickness: 2.0 mm • Roll diameter: 60 mm • Motor power: 0.75 kW • Power supply: 400 V • Dimensions: 1300 × 700 × 1260 mm • Weight: approx. 310 kg • Number of rolls: 3 • Drive: electric • Condition: brand new MACHINE FEATURES The ESR 1020 × 2.0 mm uses a three-roll system with eccentric pressure adjustment, allowing straightforward positioning of the rolls and controlled forming of the workpiece. The rolls are manufactured from high-grade hardened steel, providing good durability and resistance to wear. The lower and upper rolls are equipped with grooves for rolling rings and wire-type sections. The machine can also be used for cone rolling within its standard adjustment range. As shown in the photographs, the machine features: • heavy-duty welded steel frame, • electric motor with reduction gearbox, • manual handwheels and levers for precise mechanical adjustment, • easy roll-position adjustment, • swing-out / releasable upper-roll arrangement for easier removal of finished cylindrical workpieces, • foot pedal for convenient forward/reverse operation, • emergency stop button, • perimeter safety cord around the working area, • clearly accessible operating controls, • CE marking and safety warning labels. The foot-operated control allows the operator to keep both hands free for positioning and guiding the sheet during the rolling process, improving control when working with larger workpieces. APPLICATIONS Suitable for producing: • cylindrical sheet-metal parts, • tubes and sleeves, • rings, • curved panels, • light conical components, • general fabrication and workshop components. SALES & SUPPORT We provide professional technical advice before purchase and comprehensive after-sales assistance. We can help with machine selection, rolling technology and suitable operating parameters for different materials. Warranty and post-warranty service are available, and we can organise professional transport throughout Poland and the whole of Europe. Brand-new machine with manufacturer’s warranty. Available to order. Please contact us for current delivery time, transport costs, additional photographs, technical information or a personalised commercial quotation.

Condition: excellent (used), Holzkraft HBS 351 Professional Wood Band Saw – 400V For sale: Holzkraft HBS 351 professional wood band saw, a solid and reliable machine designed for professional woodworking shops and carpentry operations. The machine features a heavy cast iron table and a robust frame, ensuring stability and precision during cutting. Ideal for curve cuts, straight cuts, and resawing operations. Isdjyq Nz Depfx Ap Dotn Technical Specifications: Model: Holzkraft HBS 351 Power supply: 400 V / 3 Phase / 50 Hz Motor power: approx. 1.5 kW Max cutting height: approx. 225 mm Max cutting width: approx. 345 mm Band length: approx. 2630 mm Blade width: 6 – 20 mm Table size: approx. 548 × 400 mm Table tilt: 0° – 45° Weight: approx. 110 kg Condition: Machine is in good working order, fully functional and ready for immediate use. Suitable for: Carpentry workshops Furniture manufacturing Wood processing DIY woodworking workshops

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PM3, Universal testing machine PM3 (2026) Ijdpfoyc U Dbox Ap Detn Force: 3 kN Crosshead travel: 520 mm Working space depth: 66 mm Overall height: 1036 mm Weight: approx. 40 kg Displacement resolution: 0.01 mm Testing speed: 1-500 mm/min Cc7d2rmq Return speed: 700 mm/min Load cell: 3 kN Includes evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for a “quick test” even without a PC. For tests that require data storage and recording of the curve profile, we offer the option to control and evaluate the tests using the basic software. This allows you to generate various test sequences and create a test report. Furthermore, you have the option to process the raw data in your own programs. Optional: - Delivery and commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping devices: Pressure plates, bending fixtures, shear fixtures, wedge clamps, scissor clamps, peeling clamps, screw clamps, pneumatic clamps, and hydraulic clamps.

Condition: good (used), Year of construction: 2013, Inclined belt conveyor / belt conveyor, powered, approx. 24.73 m length, belt width 60 cm, Transnorm – used - Price per unit ex stock (net): €2,295! Iodewxvcrjpfx Ap Detn Manufacturer: Transnorm Year of manufacture: 2013 Section length: approx. 4.45 m curve / approx. 16.28 m / curve approx. 4 m Section width: approx. 70 cm Belt width: approx. 60 cm Height incl. feet: approx. 81 cm Section height: approx. 8 cm At least 2 motors Condition: good Available: immediately Location: warehouse Frankenberg / Saxony

Condition: used, KB Prüftechnik Hardness Testing Machine, Type: KB 750 BVRZ Machine Type: KB 750 1 kg - 750 kg UNIVERSAL DIGITAL KB universal hardness testing machines for automatic and standard-compliant hardness testing. Suitable for all hardness testing methods in the load range HV 0.2 1 - 3000 kgf, Vickers, Brinell, Rockwell, Super-Rockwell, Knoop (only HK 1), ball indentation hardness (plastics) and depth measurement according to Vickers and Brinell. Fully automatic testing sequence, evaluation of the indentations on the integrated LCD monitor using an integrated video camera and zoom lens guarantees the highest evaluation accuracy according to the standard. All hardness values are displayed digitally immediately. User-friendly and powerful control panel with a color LCD monitor, high contrast and glare-free. The measurement of the indentation is performed without parallax. The testing forces are electronically controlled and applied with the highest precision. The video image can optionally be output as a BMP file. All KB hardness testing machines are supplied with a basic equipment package that enables immediate operation with the ordered indenters. A selection of fixtures, testing tables, indenters, lenses, hardness comparison blocks, etc. is available. A connection to a PC or central computer is possible with all KB hardness testing machines. In conjunction with the fully automatic software and motorized cross table, the machine can be operated as a fully automatic system. fully automatic testing sequence optical evaluation via integrated video evaluation extremely user-friendly and powerful large LCD color display industrially designed foil keypad variable software adaptation Zoom lens 1:7 parallax-free measurement load cells, controlled load application, LED lighting Rockwell resolution 0.025 HRC extremely powerful 200 freely definable test programs Iodezg Tyuspfx Ap Detn Calibration machine accuracy (option) new LED ring light (option) automatic image evaluation (option) 2 interfaces parallel + serial, as well as keyboard connection extended load range XL (option) freely switchable language selection German, English, French, Italian KB750 BVRZ: Test load 3-750 kgf Brinell ISO 6506 HB depth measurement Vickers ISO 6507 HV depth measurement Rockwell ISO 6508 Rockwell ISO 6508 Superrockwell Testing table ∅80 mm Motor zoom 1:7 Lens 4x for HV10-HB5/750 NOT suitable for HV5 Operating function: Programmable digital panel with the following functions: Measurement of the hardness indentation on the LCD display, with adjustable measuring marks, without parallax Logically structured, simple operating guidance Any number of test programs can be created and stored (200) Automatic force selection by selecting the testing method Freely selectable application times of the testing forces Freely selectable dwell times of the testing forces Online help Automatic correction for curved surfaces according to DIN EN ISO Control of the fully automatic testing sequence Direct, digital hardness value display Tolerance display Conversions according to DIN 50150 Table B1 Protocol generation in DIN A4 format with standard printer via parallel interface Serial interface for data output to PC Optional network 4 languages: German-English-French-Italian Statistics functions, such as: Number of tests Min / Max Average Range Standard deviation cp / cpk Histogram (Changes and errors in the technical data are subject to change!)

Condition: used, Year of construction: 2022, Wood rounding tool for straight and slightly curved pieces Minimum diameter 5mm Maximum diameter 65mm Minimum length 350mm Maximum length (with loader) 1500mm (without loader, unlimited) Itedpozivlfjfx Ap Don 5.5kW tool motor Feedforward motor 0.75kw Electronic variable speed from 2 to 17 m/min 380V Spindle lubrication Supplied with adjustable tools from 15 to 65mm Also a 30/35mm milling head with exit rollers Adjustable loader according to workpiece length Machine almost new, very little used Very good deal to seize!!! Supplied with documentation and service keys

Condition: like new (used), Year of construction: 2025, operating hours: 4 h, functionality: fully functional, machine/vehicle number: Digitest II, DIGI TEST II Modular hardness testing system for fully automatic hardness tests according to Shore, VLRH, and IRHD on composite materials, soft-elastic materials, elastomers, plastics, and foams with variable testing geometries. Standards • ASTM D2240 • ASTM D1415 • DIN EN ISO 868 • DIN ISO 48-2 • DIN ISO 48-3 • DIN ISO 48-4 • NFT 46-003 • TD 00002001 • TD 00002002 • Measurement method • Shore A • Shore A0 • Shore D • Shore 0 • Shore 00 • Shore 000 • Shore 000S • Shore E • Shore B • Shore C • Shore D0 • Micro Shore A • Micro Shore D • Shore AM • Shore M • IRHD L • IRHD N • IRHD M • IRHD H • VLRH Application areas Flat, inclined, convex, and concave geometries of composite materials, soft-elastic materials, elastomers, plastics, and foams. The digi test II enables precise and user-independent hardness measurements on elastomers, polymers, soft-elastic materials, composite materials, and foams. The modularly expandable measuring system is used in research and development as well as in production and quality control to determine the material hardness of a wide range of products and to ensure quality standards. Modularly expandable Ijdpfx Apjzn I N Hj Djtn Interchangeable measuring devices allow for easy switching between the numerous measurement methods in the areas of Shore, IRHD, and VLRH without tools and with just a few steps. Thanks to the wide range of positioning and measuring devices offered, the digi test II is the right choice for laboratories, production, quality assurance, and development when testing a wide range of products. Many shapes – one solution Thanks to its modular expandability, the digi test II enables the measurement of all sample geometries. Whether you want to perform measurements on flat, inclined, concave, or convex geometries, you will obtain exact measurement values from a sample thickness of 0.7 mm thanks to the approach system. ROTOFIX FOR DIGI-TEST II Positioning device available as an accessory for the automatic measurement of a different number of samples and measurement positions. Secure measurement values without user influence In addition to perfect alignment as a table unit, the Digi-Test II ensures the optimal measurement position of the test samples through its numerous positioning devices. The most accurate measurements without user influence and manual pre-setting are guaranteed, which saves you time for the important things. Comprehensive analysis through various measurement methods Do not only measure the hardness of your test piece, but also the flow curve of the material during the test. With the option for hysteresis measurements, the Digi-Test II provides additional insights into the characteristic properties of the material. CENTROFIX Manually operated positioning device available as an accessory for measuring individual test specimens for the digi test II and the Gelomat. Modular attachments for the Centrofix can be used to clamp and fix samples and molded parts of any kind for measurement.

Condition: used, Year of construction: 2021, operating hours: 50 h, functionality: fully functional, machine/vehicle number: Digitest II, DIGI TEST II Modular hardness testing system for fully automatic hardness tests according to Shore, VLRH and IRHD on composite materials, soft-elastic materials, elastomers, plastics and foams with variable testing geometries. Standards • ASTM D2240 • ASTM D1415 • DIN EN ISO 868 • DIN ISO 48-2 • DIN ISO 48-3 • DIN ISO 48-4 • NFT 46-003 • TD 00002001 • TD 00002002 • Measurement method • Shore A • Shore A0 • Shore D • Shore 0 • Shore 00 • Shore 000 • Shore 000S • Shore E • Shore B • Shore C • Shore D0 • Micro Shore A • Micro Shore D • Shore AM • Shore M • IRHD L • IRHD N • IRHD M • IRHD H • VLRH Application areas Flat, inclined, convex and concave geometries of composite materials, soft-elastic materials, elastomers, plastics and foams. The digi test II enables precise and user-independent hardness measurements on elastomers, polymers, soft-elastic materials, composite materials and foams. The modularly expandable measuring system is used in research and development as well as in production and quality control to determine the material hardness of a broad product portfolio and to ensure quality standards. Modularly expandable Interchangeable measuring devices enable a simple change between the numerous measurement methods in the areas of Shore, IRHD and VLRH without tools and with only a few steps. Thanks to the wide range of positioning and measuring devices offered, the digi test II is the right choice for laboratory, production, quality assurance and development when testing a broad product portfolio. Isdpfxjzn Na Ts Ap Djtn Many shapes – one solution Thanks to its modular expandability, the digi test II enables the measurement of all sample geometries. Whether you want to perform measurements on flat, inclined, concave or convex geometries, you will receive exact measurement values from a sample thickness of 0.7 mm thanks to the approach system. ROTOFIX FOR DIGI-TEST II Positioning device available as an accessory for the automatic measurement of a different number of samples and measuring positions. Secure measurement results without user influence In addition to perfect alignment as a table unit, the Digi-Test II ensures the optimal measuring position of the test samples thanks to its numerous positioning devices. The most accurate measurements without user influence and manual pre-setting are guaranteed, which gives you time for the important things. Comprehensive analysis through various measurement methods Do not only measure the hardness of your test specimen, but also the flow curve of the material during the test. With the option for hysteresis measurements, the Digi-Test II provides additional insights into the characteristic properties of the material. CENTROFIX Manually operated positioning device available as an accessory for the measurement of individual test specimens for the digi test II and the Gelomat. Modular attachments on the Centrofix allow samples and molded parts of any type to be clamped and fixed for measurement.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902031174, empty load weight: 5,835 kg, maximum load weight: 29,165 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2023, loading space volume: 50 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,740 mm, suspension: air, tire size: 385/65 R22,5", color: grey, The images shown are archive photos. The vehicle may still be in use. Chassis Tipping Semi-Trailer Fine-grained steel welded construction in Basic lightweight design, fifth wheel plate with replaceable 2" king pin Curved front wall (patented) 24 t 2-speed support legs, single-sided operation, with straight base, without compensating rod 2x wheel chocks with holder Aluminium side underrun protection Rear under-run protection, foldable 6x half-shell mudguards Integrated mudguard holders with stone-repellent surface Tarpaulin rod with bracket 2x rear towing hooks Axles & Suspension BPW disc brake axles Iedpfx Aey Efcusp Dstn "Axle/chassis laser alignment" reduces tyre wear and fuel consumption Air suspension 1st axle with automatic lift, including forced lowering and starting aid, operated by '3x brake' application Braking System 2-line compressed air braking system Colour-coded routing for easy servicing Spring-type parking brake 2 non-interchangeable coupling heads at the front, without connection line EBS (Electronic Braking System) with EBS socket at the front, without connection cable Note: This trailer must only be towed by tractor vehicles that ensure ABS functionality! With lift & lower valve Vehicle stability control system Wheels and Tyres 6x 385/65 R22.5" tyres 6x steel rims Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white marker lights at front 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome plated, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Tipping Body Aluminium box body made of high-quality, abrasion-resistant material Sloped 5 mm thick front wall with external cylinder mounting Side walls made of 30 mm hollow chamber profiles, clean welded, with bulk material deflecting top rail. Internal ladder at the front wall Shovel and broom holders outside front wall Rear wall with pendulum mounting and 'double-joint' hinges, with 2-winged door split 1/2 to 1/2, upper swing beam, with one grain slide per door Rear wall with rubber seal 6 mm continuous floor Standing platform with access, connecting plate for air/electric/brake Roll tarp can be stowed one side (FR-right), with central locking (FR-left) Operating Notes For transporting salt, lime, etc., we recommend a tipping cylinder with a hard chrome-plated piston rod to prevent corrosion and damage from the material. The total weight stated is technically possible; depending on the cargo, the full weight may not be achievable within the permissible axle/support/saddle loads (incorrect load distribution may result in poor handling and tracking). Note! Not suitable for chemically aggressive substances (e.g., acids, chlorine compounds, sulphur compounds, alternative fuels); such substances can cause stress corrosion cracking and extreme cracking in the body when combined with moisture on the body surface! Vehicles with load bodies are intended for chemically non-aggressive cargo. Use for transporting aggressive goods such as acids, bases, salts, fertilizers, sewage sludge, and household waste is at the operator's own risk. This can result in damage such as stress corrosion cracking or pitting. Archive images are shown!

Year of construction: 2013, condition: used, functionality: fully functional, machine/vehicle number: 0-4 SD 13, Used bender profile machine , in good conditions It is possible to work on shapes such as triangles, trapezoids, pentagons. With profiles that do not require heating, circles and shapes with curved sides can also be processed. Iodjyziqnspfx Ap Djtn An automatic profile drilling system is available on request, for the creation of holes for gas injection in the subsequent processing phases. Drilling is carried out with specific drills suitable for all types of profiles, and is carried out automatically in line.

Condition: good (used), - Capacity: approx. 4,500 liters - Filling quantity: approx. 3,000 - 3,500 kg - Equipped with a slow-speed special agitator Equipment: - Bottom outlet: ball valve, DN 65 - Clear outlet: DN 40 - Oval manhole - Drain valve - Level indicator - Dome, DN 300 Iedpjzc H Ufofx Ap Djtn - In good condition Dimensions: Diameter: 1,700 mm Height of curved bottom: 200 mm Shell height: 2,000 mm Overall height: approx. 2,800 mm

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, input voltage: 230 V, measuring range X-axis: 200 mm, measuring range Y-axis: 85 mm, measuring range Z-axis: 50 mm, total width: 483 mm, total length: 598 mm, total height: 464 mm, overall weight: 64 kg, input current: 5 A, repeat accuracy: 0.005 mm, input frequency: 50 Hz, Equipment: CE marking, USB port, documentation/manual, type plate available, PG1000-400 – Optical system for inspecting the geometry of rotating cutting tools PG1000-400 is a professional optical measuring and inspection system for quickly checking the geometry of cutting tools. It is designed for tool manufacturers, sharpening shops, grinding shops, tool rooms, CNC machining centers, and quality control/metrology departments. Its main application is the inspection of rotating cutting tools after manufacturing, grinding, sharpening, or reconditioning. The system is suitable for HSS and solid carbide tools, especially drills, end mills, step drills, reamers, taps, form tools, micro tools, and custom-made tools. The device can also be used to inspect carbide inserts, selected thread geometries, screws/bolts, and other precision parts, provided that the geometry being inspected is optically accessible to the camera. The system's primary focus is on the inspection of cutting tool geometry. Typical applications: - In-process inspection directly at the grinding machine or in production - Incoming and outgoing inspection of tools - Inspection after sharpening/regrinding - Quality documentation and measurement reports - Repeated inspection of serially produced tools PG1000-400 allows for the inspection of, for example: - Rake angle and clearance angle - Helix angle - Point angle for drills - Radii and corner radii - Diameters and distances - Cutting edge length - Land width, margin width, facets - Web thickness - Tool profile - Runout - Condition and wear of the cutting edge - Comparison of geometry with DXF/DWG drawings The system operates optically and non-contact. This is advantageous when inspecting sharp edges, fine microgeometries, coated tools, and precise edges, where speed, repeatability, and minimizing operator influence are important. The system includes REACTION software, developed specifically for the inspection of cutting tools. The software offers more than 50 measuring functions, edge detection, automatic alignment of measuring points to the edge, saving inspection scenes, comparison with DXF/DWG geometry, PDF reports with PASS/FAIL evaluation, and data export to Excel/CSV. Technical specifications: - Recommended tool diameter: 0.635–75 mm - Tool measuring length: approx. 190–200 mm - Magnification range: 12.5× to 145× - Camera: 5 MP - Monitor: 27" 4K Ultra HD - Measuring range: 85 mm vertically × 200 mm horizontally - Accuracy/repeatability: ±5 µm at maximum magnification - Device dimensions: approx. 598 × 483 × 464 mm - Weight: approx. 64 kg Offered configuration: - PG1000-400 optical cutting tool inspection system - M / F / A encoders - PC with REACTION software - 27" 4K Ultra HD monitor - Flexible LED lighting with diffuser - Curved magnetic diffusion plate - Rotating base block for clamping fixtures - 1000-026-5"-ASS – 5" V-block assembly with insert, top clamp, and stop - Basic remote operator training About the manufacturer: PG1000 is based on the long-term development of systems for inspecting cutting tools. The first generation of PG1000 was introduced in 1993. The system is manufactured in the USA by PG Inspection Technologies LLC, which specializes in this product line. Since 1996, more than 1000 PG1000 systems have been delivered. Condition and delivery: - New machine - Year of manufacture: 2026 - Warranty: 12 months Isdpezdz S Tjfx Ap Djtn - Location: Czech Republic / EU - Delivery, assistance with commissioning, and training according to agreement - CE marking and relevant EU documentation The device i

Condition: good (used), Year of construction: 1999, Accordion roller conveyor / scissor roller conveyor, Gura, extended length 4.20m, mobile – used - : Price ex-location: €650 (net), disassembled, packed and loaded! Manufacturer: Gura Type: 1200 – 524 – 3SVX Year of manufacture: 1999 Length extended: approx. 4.20m Length retracted: approx. 1.30m Width: approx. 53cm Height (height-adjustable): currently approx. 80cm Roller length: approx. 11cm Mobile on castors The scissor conveyor is extendable, suitable for curves, and its length is variable. Condition: good Availability: immediately Ijdpfxjy Aiyrj Ap Dotn Location: Storage site, Frankenberg, Saxony The scissor conveyor is extendable, can be steered through curves, and is variably adjustable in length.

Condition: new, functionality: fully functional, working width: 510 mm, area performance: 2,300 m²/h, overall weight: 230 kg, warranty duration: 12 months, water tank capacity: 42 l, HAKO SCRUBMASTER B45 CL TB510 PROFESSIONAL FLOOR SCRUBBERS - 2300m²/h TECHNICAL DATA: Model: Scrubmaster B45 CL TB510 Manufacturer: Hako Type: Compact scrubber Country of manufacture: Germany Series: Professional Condition: NEW Wheel drive: Yes Battery charger: Built-in Power supply: Battery Battery type: Sonnenschein GF12105 V (12V 105Ah) Water tank type: AntiBac Number of brushes in the set (pcs): 1 Brush working width (mm): 510 Squeegee working width (mm): 860 Water tank: clean / dirty (l): 42 / 42 Theoretical surface area performance (m²/h): 2300 Weight ready to use (kg): 230 WHY CHOOSE THE HAKO SCRUBMASTER B45 CL TB510 SCRUBBERS The AntiBac tank used in Hako machines is made of a material with antibacterial properties. This reduces the growth of bacteria and fungi inside, improving the hygiene of the machine and reducing unpleasant odors. This solution is particularly useful in areas with high sanitation requirements, such as hospitals and food processing plants, and also helps maintain the tank in better condition for longer. Maneuverable, quiet, and easy to use. The B45 CL scrubber is equipped with a 510mm disc brush head. The device is ideal for cleaning small and medium-sized rooms where easy maneuverability is essential. The intuitive control panel ensures easy operation and a quick learning curve for basic functions. The scrubber features an arched squeegee that efficiently removes water and leaves surfaces perfectly clean and dry. The device is made of high-quality materials, resistant to impacts and chemicals. Like all HAKO products, the B45 CL TB510 is proven in industrial applications, and the availability of parts and service guarantees a long service life. HAKO SCRUBMASTER B45 CL TB510 EQUIPMENT Iedpfjy Amwuex Ap Dotn ANTIBACTERIAL TANK 510mm medium-hard disc brush, 860mm arched squeegee, Oil-resistant squeegee rubbers, 2x 12V 105Ah Sonnenschein batteries Built-in charger Ease of use and ergonomics. - The control panel is intuitive and simple, and the device's design provides excellent visibility of the working area. Professional cleaning of any surface. - The scrubber is equipped with a 51 cm diameter brush and a 42-liter tank, perfectly combining compactness with the ability to clean larger surfaces. - Thanks to the powerful brush pressure and effective water extraction system, the device leaves floors clean and dry in just one pass. Designed for everyday, intensive use. - The Scrubmaster B45 CL is a robust, durable, and reliable device, designed for long life and professional use.

Condition: excellent (used), Year of construction: 2016, operating hours: 6,500 h, functionality: fully functional, 12 Gathering Stations Müller Martini 3692 Tensioning/Handfeeding unit 3692 Itedpfsyufk Asx Ap Djn ASAC Automatic Caliper Control 3715 Reject Delivery Automatic Signature Recognition Cameras: ASIR 3 12 clamps Muller Martini 1577 Pantera Touchscreen control with automatic set-up Hotmelt spine & Side gluing unit with premelter Hotmelt side glue with premelter PUR Nozzle Spine Gluing Unit Curved conveyor system 90 Muller Martini 3520 Conveyor belt Muller Martini 3520 Conveyor belt with escape gate 3520 Müller Martini Granit 3 Knife Trimmer 3676 Müller Martini UNO Stacker 1534

Condition: used, functionality: fully functional, machine/vehicle number: 32137, mileage: 43,090 km, power: 260 kW (353.50 HP), first registration: 11/2022, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,200 mm, fuel: diesel, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro6e, suspension: air, loading space volume: 23.5 m³, Equipment: ABS, AdBlue, air conditioning, airbag, cruise control, differential lock, electronic stability program (ESP), power assisted steering, power mirror, tachograph, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use. Further comparable vehicles are available upon request. Engine OM 936, electronic braking system, disc brakes front and rear, ABS, ASR, ESP, hill start assist, lane keeping assist, turning assistant, Active Brake Assist 4, blind spot camera system, reversing camera, distance control cruise control, cruise control, air suspension, liftable and unloadable trailing axle with hydraulic steering, differential lock, parking brake, electrical waste collection system, axle load measuring device, rain sensor, light sensor, lockable fuel tank, main tank 200 L, AdBlue 25 L, high cab, folding door on the right, driver's seat – comfort suspension seat + 3 static passenger seats, tinted windshield with band filter, electric windows on the left, electrically heated mirrors, lift-up roof, immobilizer with transponder, radio + Bluetooth, telephone, digital tachograph VDO, voltage converter 24/12V, additional 24 V socket, fuse box, pollen filter, air conditioning, pre-installation for all-round lights, pre-installation for toll collection, pre-installation for FleetBoard, speed limiter, electric sun visor. Volume-optimized, dimensionally stable, smooth-surfaced collection body with curved contour, torsion-resistant and liquid-tight steel construction, double-lip special seal between collection body and rear section, completely welded, raised front panel 500 mm, reinforced rear section side walls 4 mm, highly wear-resistant loading area reinforced 8 mm, line rupture protection against sudden lowering of the rear section, heated rear monitoring system with 7" monitor, CAN-BUS control, running boards with integrated weight sensor, warning signal when reversing, work lights, all-round lights, plastic tool box, central lubrication system BEKA-MAX, drain spout (loading area), bio-drain front right, bio-drain loading area, spreading system Zöller Delta 2322 Premium. Itsdpfxjzlrdvs Ap Dsn

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,500 mm, measuring range Z-axis: 700 mm, Equipment: type plate available, Zeiss CNC Coordinate Measuring Machine Prismo 9/15/7 MASS VAST GOLD - RDS+VAST XXT Year of manufacture: 2004 Retrofit 2024, last calibration 01/2025 Measuring range: X = 900 mm, Y = 1500 mm, Z = 700 mm In excellent technical and optical condition. Device features, equipment: C99 control system with BP26_SE control panel Automatic temperature compensation VAST GOLD sensor system RDS sensor system with VAST XXT Probe changer magazine MSR 10-position VAST Gold Probe changer magazine 3-position VAST XXT Probe changer plate 8x VAST Gold Probe changer plate 3x VAST XXT Reference probe Temperature probe Ijdpfx Apjzk Id Aj Dstn Probe accessories Calibration sphere HP Z4 workstation WIN11 with monitor Calypso Basic 2024 software Curve and QS-Stat options Calypso upgrade and other options possible Further accessories and options possible Available for short-term delivery.

Condition: as good as new (ex-display), Year of construction: 2021, pressing force: 120 t, Hidrobrasil Glue Press – Laminated Timber Press – 12,000 mm – 12 × 10 t Cylinders For sale is a hydraulic glue press from the manufacturer Hidrobrasil, designed for the production of wood laminated beams up to 12,000 mm in length. The machine is designed for the industrial production of laminated timber and, thanks to individually or jointly controlled cylinders, offers high flexibility in the pressing process. Curved components can also be produced using appropriate molds. ===== Technical Data + Information: Hydraulic Laminated Timber Press ==== General Information - Manufacturer: Hidrobrasil - Model: Glue Press - Machine Designation: Laminated Timber Press - Design: Hydraulic Glue Press - Application Area: Wood Laminated Beams / Laminated Timber Production ==== Working Area - Max. Component Length: 12,000 mm - Max. Width: 150 mm - Max. Height: 600 mm (depending on wood type and configuration) ==== Press System - Number of Cylinders: 12 - Pressing Force per Cylinder: 10 t - Individual or Group Control Possible ==== Speeds - Downward Speed: 10 mm/sec - Upward Speed: 25 mm/sec ==== Hydraulics Itodjg Tzbaspfx Ap Djn - Components: Bosch Rexroth (except cylinders) - Hydraulic Unit: External, located behind the press - Oil Tank: 500 l - Motor Power: 15 kW ==== Control - Control panel for individual or joint cylinder control - Adjustable pressure holding time ==== Special Features - Production of straight and curved laminated beams possible - High flexibility through modular cylinder control ===== Wood gluing, laminated timber production, timber construction, lamination, industrial wood processing Hydraulic press, hydraulic press, glue press, laminated timber press, laminating press, laminated timber plant, wood press, industrial press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directive and European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they meet all points of the national Brazilian safety guideline NR 12, which is based on these. Our great strength lies in the construction of special machines and the automation of presses. We distribute customized hydraulic presses at surprisingly affordable prices. Predominantly, components from leading European manufacturers are used for the hydraulics of the presses.

Condition: excellent (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, The furnace is designed for the tempering of colored, ornamental, and screen-printed glass, as well as clear float glass with an emissivity of over 0.04. According to EN 12150:1 – 2000, for 4 mm thick glass, a success rate of at least 95% is guaranteed, and for glass thicker than 5 mm, a success rate of over 97% is guaranteed. Structurally, the furnace consists of five distinct zones: loading, bending module, heating, cooling, and unloading. When tempering flat glass, the workflow is from left to right: loading – passing through the bending module (which functions as a flat conveyor) – heating – cooling – unloading. When bending glass, the following workflow applies: loading – passing through the bending module – heating – back into the bending module (where the glass is moved transversely along the length of the furnace from left to right while the upper and lower parts of the module gradually conform to the curve to be created) – unloading (in the case of curved glass, unloading also takes place at the entrance). The inlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides. The structure of the heating section is a box-type with a double layer coated with thermal insulation material (perfect insulation performance, low energy consumption, and natural cooling of 15 ℃ / h). Inside the heating zone, there is a conveyor system with ceramic rollers resistant to high temperatures, manufactured by Vesuvius (diameter 48 * Ø85mm, spacing 120mm). Isdpfx Apjz Ru Iyo Detn The heating elements (resistors) are installed on the upper and lower sides of this zone. The resistors are arranged in a matrix with temperature sensors, automatic heating and pause functions to save energy. The upper section has 25 heating elements, and the lower section also has 25. Each resistor has an independent control loop. Outlet conveyor The outlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 128 h, load capacity: 3,500 kg, lifting height: 4,800 mm, free lift: 1,520 mm, fuel type: electric, mast type: triplex, construction height: 2,212 mm, fork carriage width: 1,110 mm, fork length: 1,200 mm, empty load weight: 4,584 kg, total length: 2,770 mm, drive type: Elektro, construction width: 1,260 mm, Electric 4-wheel forklift Load center: 500 Fork width: 150 mm Fork thickness: 50 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: very good Front tire type: Superelastic Front tire size: 28x9-15 Iedpfez H D N Dex Ap Detn Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 6.50-10 Rear tire condition: 80 - 100% Battery voltage: 80V Battery capacity: 600Ah Battery manufacturer: KION Battery type: PzS Battery condition: New Triple free-lift mast VFHM4800 Triple free-lift mast with full free lift, side shifter CSPEAR 3-3.5t 1100mm 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, CE certificate, safety light, windshield washer system, heated rear window, roof window according to specification, comfort leather seat with CE, with ISO valve, panoramic mirror, 2 exterior mirrors, driver's compartment equipment: 2 grab handles on the overhead guard at the rear right with horn, hydraulic control: multi-lever control, 4 independent levers for lifting, tilting and additional hydraulics to the right of the seat, with clamp release on the fourth lever, 3.5-inch color display, shift lock: via PIN code, driving control: one-pedal control, switching of the direction of travel on the hydraulic control, USB charger and external charger 12V/10A, lighting system: LED version, front: 2 protected LED headlights with direction indicator; rear: LED tail and brake lights, direction indicator, hazard warning lights, mechanical foot parking brake, Curve Speed Control: The steering angle-dependent speed limitation reduces possible damage to goods by means of an appropriate cornering speed, 3 selectable driving programs available in the 3 operating modes Standard, Performance and Eco.

Condition: ready for operation (used), Year of construction: 1997, A Mori-Say 6/32M multi-spindle curve lathe is available. Number of spindles: 6, max. spindle speed: 3750 rpm, max. bar diameter: 40mm. Dimensions X/Y/Z: approx. 6200mm/1600mm/2050mm, weight: approx. 9500kg. Itjdotqfq Rspfx Ap Don

Condition: new, functionality: fully functional, Year of construction: 2026, Mechanical asymmetrical three-roller bending machine with pre-bending Make FACCIN, model ASI 2015 Guaranteed services: Sheet thickness rolls at 750 mm diameter 5 mm Itedpfxocuxpqo Ap Den Sheet thickness bending at 750 mm diameter 4 mm Sheet thickness rollers with 195 mm diameter 4 mm Sheet thickness bending at 195 mm diameter 3 mm Performance data refer to steel with a yield point of 240 N/mm² and a strength of 370 N/mm² Technical specifications: Working length 2,000 mm Top roller diameter 150 mm Bottom roller diameter 150 mm Side roller diameter 150 mm Installed power 4.3 kW rolling speed 4 m/min Length 3,300 mm Width 750mm Height 1,200 mm Weight 2,136 kg Standard equipment: All rolls forged and inductively hardened Both central rollers driven Safety control with immediate stop of all machine movements Machine stand stands on frame carrier made of welded construction. This ensures optimum stability and reliability of the machine. Optimum power transmission in the machine stand through long guides with straight-line positioning movement of the bending rollers. (No curved adjustment movement and therefore no torsional forces in the machine stand) Digital display for the position display of the side roll motorized adjustment of the side roll brake motor for rotation and side roll movement Cone bending device with hardened stop block Emergency stop trip wire around the machine Machine with CE certification and documentation

Year of construction: 2009, condition: ready for operation (used), A Mitsuboshi Diamond Industrial CNC glass cutting machine is available. Glass thickness range straight: 0.4mm-1.1mm, glass thickness range curve: 0.8mm-2.2mm, cutting range X/Y: 500mm/500mm, cutting speed: 500mm/s, cutting accuracy straight: +/-40µm, cutting accuracy curves (depending on radius): +/-100µm. Machine dimensions X/Y/Z: approx. 1100mm/1900mm/1600mm, weight: approx. 1000kg. Documentation available. On-site inspection is possible. Itedpfx Aswihzuop Den