Used Cutter Mixer for sale (4,705)

Condition: used, EGLI Frozen Butter Block Cutter / Model : V1 / Condition : Good / IN STOCK EGLI Frozen Butter Block Cutter High speed Cutter Safety Door with air operated actuator The machine is used by adding in the butter blocks and the door closes automatically, the piston applies pressure to the block pushing this towards the cutting divide that rotates at high speed . The butter pieces are dropped below the machine into stainelsss steel hopper or silo . Usage: Frozen Block cutter for butter and similar products Electrics: 3~ / 400 v/50hz Psdpfoz Ht Ebox Adxsrc Air: 6 bar -8bar

Condition: like new (used), Electric Roll Cutter, 200 cm * Cutting length: 200 cm * Includes base frame * Includes roll holder * Includes collection bag for paper waste * Includes lighting * Cutting indicator * Max. cutting thickness: 1.2 mm * Electric * Cutting activation via foot switch or by pressing a bar above the table * Self-sharpening blade Pedpsz Hkn Hjfx Adxorc * 230 V / 50 Hz / Operating manual included.

Condition: excellent (used), machine/vehicle number: 011001, Untrimmed Book Size: Max. Spine Length 350 x Fore-edge Length 320 mm Limitation: The maximum length from the center to top or bottom is 175 mm Min. Spine Length 148 x Fore-edge Length 105 mm Limitation: The minimum length from the center to top or bottom is 74 mm Finished Book Size: Max. Spine Length 340 x Fore-edge Length 300 mm Limitation: The maximum length from the center to top or bottom is 170 mm Min. Spine Length 145 x Fore-edge Length 101.6 mm Limitation: The minimum length from the center to top or bottom is 72.5 mm Trim Width: Fore-edge: Max. 110 mm / Min. 1 mm Top and bottom: Max. 80 mm / Min. 1 mm Prjdpfx Asz D U Hnjdxjc Trim Height: 1 to 65 mm Book Weight: Transport Speed Level 7: 2.8 kg or less Transport Speed Level 6: 4.0 kg or less Transport Speed Level 5: 5.2 kg or less Height of Entrance Section Pusher: 56 mm Clamp System and Pressure: Servo Motor 2 kN to 8kN Production Speed: 400 to 1,000 cycles per hour

Condition: good (used), Ram punch AMC Hydromatic 220 Label die cutter A professional machine made in Italy. Pjdpfoz Dtbwjx Adxsrc AMC is a world leader in the production of label die-cutting machines. Very good condition. The machine is 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 220 x 220 mm Number of cycles: 18/min Productivity: 900,000 sheets/h Weight: 700 kg The machine is equipped with a hydraulic quick-action unit. Photo safety barriers. Adjustable feed table in all directions. Two operating modes: semi-automatic and manual. Tail on the delivery.

Condition: used, Spiral mixer Diosna SP 40 D Capacity (dough): 40 kg Prodpfx Aoz A R U Sedxoc Capacity (flour): 25 kg Automatic timer control Two timer switches Two speed settings Reverse function Mobile with locking device

Condition: like new (used), operating hours: 12 h, KILIA 65 Liter Meister Plus – factory-reconditioned by HELTEK | KILIA For sale is a KILIA 65-liter high-speed cutter / Meister Plus, which undergoes complete factory reconditioning at HELTEK | KILIA. This is not a simple repair or cosmetic refurbishment. The machine is completely disassembled and rebuilt from the ground up, both technically and visually. The goal is to achieve a condition that consistently aligns with the current machine standards of HELTEK | KILIA. The 65-liter cutter is ideal for butcher shops, meat processing plants, and industrial food processing operations. Technical data: Manufacturer: KILIA Model: Meister Plus / High-speed cutter Bowl capacity: 65 liters Batch processing capacity: approx. 46 kg per batch Main motor: 22 kW Knife shaft speed: approx. 50–5,100 rpm Reverse / mixing speed: approx. 50–500 rpm Plate speed: approx. 7–20 rpm Knife and plate drive: continuously variable, frequency-controlled Voltage: 400 V / 50 Hz Total electrical connection power: approx. 28 kW Customer-side fuse: 50 A Control: modern PLC Operation: 7-inch HMI touch panel Central lubrication: yes Scope of the HELTEK | KILIA factory reconditioning The machine is completely disassembled, except for the base frame. As part of the reconditioning, the following work is carried out, among other things: new base plate, professionally welded in machine frame completely refurbished and blasted stainless steel areas refurbished or glass bead blasted base frame with high-quality new powder coating 22 kW main motor new or completely overhauled and certified by Siemens new motor tensioning device made of stainless steel plate shaft drive new or completely overhauled and certified by the manufacturer plate shaft bearing completely new new bearings and new bearing seats for the plate shaft bearing Pjdpsz A Ufzofx Adxjrc new knife shaft new knife shaft bearing new electronic central lubrication system new wear parts new scrapers, guides and sliding elements made of food-grade blue POM electrical system and control completely new The electrical equipment is also comprehensively modernized: new PLC control new 7-inch HMI touch panel new frequency inverters new contactors and relays new cables and wires new or revised sensors modern safety technology complete rewiring This gives the machine modern control and drive technology with good spare parts availability and high serviceability. Factory-reconditioned instead of just used You will receive the extremely robust basic structure of a proven KILIA cutter, combined with modern control, drive and safety technology. Proven KILIA quality. Modern HELTEK technology. Ready for many more years of production. After completion of the factory reconditioning, the machine is completely inspected and subjected to a FAT – Factory Acceptance Test. Warranty We provide a 6-month warranty on the factory-reconditioned machine in accordance with our terms and conditions. The knife shaft bearing is excluded from the warranty. Inspection and machine acceptance / FAT can be arranged at HELTEK | KILIA. Transportation, installation and commissioning can be offered on request.

Condition: new, Year of construction: 2013, functionality: fully functional, We are selling a new, unused coloring unit Piovan Type MDP2 Year of manufacture 2013, unused, factory-new SG 80 28/13 I 24:1 VOLUMETRIC DOSER From 5 g/h up to 150 kg/h Prjdpfxsyzccws Adxsc Original price: approx. 7,000 euros High accuracy thanks to a wide range of gear ratios and an inclined screw geometry Perfect flow due to a central block design Simple and quick cleaning

Condition: reconditioned (used), Number of milling spindles 2 St. fence ja ja /nein workpiece ja STEGHERR Cross-bar Milling Machine, Type KSF-mini ----- Specialized milling machine for the efficient production of intersecting muntin bar joints. The KSF-mini muntin bar milling machine embodies STEGHERR's extensive experience in manufacturing specialized milling equipment for intersecting muntin joints. The KSF-mini enables the rapid and precise production of all standard intersecting muntin joints encountered in practice. Muntin bars that have already been profiled can also be processed on the KSF-mini. Precise milling is achieved because the workpiece is machined on three sides in a single clamping operation. The tools are driven by two three-phase motors; workpiece clamping is pneumatic. The profile cutter is designed to match the web width. The saw blades that perform the lap-joint cut can be adjusted to the profile cutter's dimensions using spacer rings. The machine is designed for a maximum workpiece cross-section of 56 x 46 mm. - Motor: 2.2 kW, 380 V, 50 Hz - Pneumatic pressure: 6 bar Includes: ----- - Machine stand - Foot pedal control - NEW ORIGINAL stop rail with scale and sliding stop featuring an optical setting aid, as shown in the photos. Tools as shown in the photos: 1 Profile cutter 3 Saw blades (corresponding to a web width of 10 mm) Footprint approx. L x W x H: 1,330 x 570 x 1,430 mm Weight: approx. 150 kg ----- Prsdpezip Nwofx Adxec (All technical specifications provided by the manufacturer; no liability assumed!)

Condition: used, This listing is for Stuart SRT9 Roller Mixer The unit is in full working condition and ready for immediate use This roller mixer is a high-quality lab instrument manufactured by Stuart (Model: SRT9). Provides gentle and highly efficient rolling and rocking action, ideal for mixing blood samples, viscous substances, and liquid-solid suspensions. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Podpfezqf Ncox Adxjrc Integrity: 100% Original Parts (Non-Refurbished)

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 176308, Country of manufacture: Switzerland Voltage: 400 / 380 / 50 / 3 Net weight: approx. 350 kg Dimensions: 82x85x156 cm Installed power: max 2 kVA Customs classification: 8460.3930 TECHNICAL SPECIFICATIONS GRINDING WHEEL SPINDLE UNIT Spindle speed (both rotation directions): 2,500 / 3,500 / 5,000 / 7,100 rpm Grinding wheel motor power (2,800 rpm): 0.4 HP Vertical slide stroke (linear): 100 mm Micrometric stop adjustment travel: 25 mm Micrometric stop readout accuracy: 0.01 mm WORKPIECE SPINDLE UNIT Workpiece spindle speed (both directions, continuous): 100–900 rpm Motor power: 0.2 HP Indexing plate teeth count: 120 Angular vernier reading: 20' Collet type: W-20 Horizontal travel: 100 mm Rapid feed per handwheel turn: 2 mm Prodew T S Sqepfx Adxjc Micrometric feed per handwheel turn: 0.1 mm Micrometric feed per scale division: 0.001 mm SPINDLE HEAD SWIVEL RANGE (a) Main direction: 165° Fixed ratchet increments: every 3° Increments with micrometric screw: every 2' (b) Grinding plane: approx. 15° Stop: at 0° Cross movement range: 80 mm Micrometer travel: 25 mm Reading precision: 0.01 mm Extraction motor power (2,800 rpm): 0.25 HP All technical specifications provided without guarantee and subject to possible errors or omissions.

Condition: excellent (used), Tool and cutter grinder CG Pjdsywavtopfx Adxerc

Condition: used, Comprehensively tested and refurbished, used Winkworth model model RT400 stainless steel high speed ploughshare (T-Arm) mixer. Manufacturer: Winkworth Material: Stainless steel Year of Manufacture: 2016 Capacity: 400 litre (product dependent) Mixing trough: 1,300mm long x 800mm diameter. Type Of Blades: T-Arm ploughshare blades with drive/gearbox. Specifications: Bowl Volume: 105.7 gal Predpfx Aoymayijdxsc Material Of Construction: Stainless steel Dimensions: 1300mm long x 800mm diameter

Condition: used, Reportedly unused since refurbished Winkworth model 16Z-63 stainless steel z-blade mixer. Mixing trough measures approximately 400mm x 400mm x 350mm deep. All product contact parts in 316/316L stainless steel. Approximate capacity 27 to 36 litre working capacity (product dependent). (2) 316/316L stainless steel z-blades driven by 4kw, 3/50, 1464/37 rpm geared motor. Unit has stainless steel hinged vacuum rated hood/lid with clamps. External 304/304l stainless steel jacket rated 3.5 bar working pressure at 150 deg.c. Unit includes electrically actuated tilt discharge mechanism. Unit includes ICS Cool Energy Ltd model iC220 chiller. Has control panel for mixer and chiller operation. Prodpfsymazaox Adxjc

Condition: used, functionality: fully functional, The SP50L is a high-quality, flexible solar panel with a power output of 51 watts. Thanks to its advanced Back Contact cell technology, the panel achieves an efficiency of over 23%, ensuring high energy generation even under less than ideal lighting conditions. Its ultra-lightweight and thin design makes the panel particularly suitable for applications on boats, campers, and other surfaces with slight curves. Weighing only approximately 0.8 kg and measuring 1109 × 292 × 2 mm, the SP50L combines durability, flexibility, and excellent performance in a compact solution for sustainable energy generation. Podpfxezbrywe Adxorc

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Extendable spiral mixer AL 150, electrically lockable, with four mixing bowls Psdpfez N Hf Uex Adxsrc Phone number: Export price: €15,000

Year of construction: 1990, condition: ready for operation (used), LIQUIDATION SALE – IMMEDIATE AVAILABILITY Due to the closure of the production facility, we are offering for sale a HÄNDLE mixer and extrusion press, used in a ceramic production line. Prjdpfx Asz Sbw Sedxjc Price for the mixer and press: EUR 120,000 net, EXW, negotiable. Reasonable offers will be considered. Preference will be given to buyers who can complete the transaction and collect the equipment quickly. Equipment offered: HÄNDLE MDVG 920 B mixer, manufactured in 1990, weight 6,000 kg, power 30 kW HÄNDLE PZG 56 A/50 extrusion press, manufactured in 1990, weight 7,200 kg, power 90 kW, serial no. PZ 3098 Included: control cabinet two press heads with outlets: 24 × 39 and 32 × 45 The machines were fully operational until the plant shut down in December 2025. Wear parts (press screws, mixer paddles) were replaced in March 2025 and are in good condition. The equipment is characterized by robust construction, durability, and straightforward maintenance. It is available for inspection at the plant in Panoszów, Poland. The machines are available immediately. Quick completion of the transaction and prompt collection are preferred. Additional technical information and photographs are available upon request.

Year of construction: 2008, condition: used, controller model: Windows XP SP3, power: 9 kW (12.24 HP), working width: 2,500 mm, TECHNICAL DETAILS Maximum working width: 2,500 mm Minimum working width: 510 mm Number of saw blades: 6 + 1 MACHINE DETAILS Control system: Windows XP SP3 Machine programming software: Packsize control console 3.9.3 Prodpoz Ekd Esfx Adxjc Total connected power: 9 kW EQUIPMENT Saw carriage CE conformity The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8534

Condition: like new (used), functionality: fully functional, A very nice slitting and creasing machine is for sale. Brand: Duplo, model DC 615, with belt suction, 220 volts. Features a USB connector and LCD screen. You are welcome to test this machine at our location. We can arrange transport and packaging for you and load it into a truck or container. Please inquire for a price including transport (within the Netherlands). Psdozyak Topfx Adxerc Best regards, Henk Hoos

Condition: good (used), Diosna screw mixer / Double-arm mixer / - Model W 120 Psdpfx Adsz R Ry Aexerc - Used - 2 removable bowls - Manual control - Maximum capacity: 120 kg - Good technical condition - Machine in production - Price upon request

Year of construction: 2022, condition: like new (used), functionality: fully functional, WOOKIL MEGACUT MC-2500 Die Cutter MAX. SHEET SIZE: 1800x2600 mm MAX. CUTTING SIZE: 1700x2500 mm Predpfsz Suafsx Adxoc MAX. CUTTING PRESSURE: 550 tons

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, total width: 2,900 mm, total length: 3,300 mm, repeat accuracy: 0.2 mm, cutting height (max.): 50 mm, compressed air connection: 6 bar, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 3 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool Prodpefnlkwjfx Adxjc • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) The machine is CE certified.

Condition: used, axle configuration: 2 axles, first registration: 07/2009, suspension: air, tire size: 425/65R22.5, wheelbase: 1,310 mm, Applicable material: Concrete Tyre size: 425/65R22.5 Prsdeuc Enzepfx Adxec Suspension: air suspension Drive: Wheel Empty weight: 8.420 kg Carrying capacity: 27.580 kg GVW: 36.000 kg Make of bodywork: LIEBHERR

Condition: used, Year of construction: 2021, Flatbed Cutter Elitron TH 31.20 for Sale. Year of Manufacture: 2021 Two-carriage configuration for increased productivity. Podpfxew Duchj Adxjrc Specifications: - Working area: 3150 x 2050 mm - Working speed up to 102 m/min - Two independent cutting heads for materials up to 50 mm thick - Working area divided into 40 individual vacuum sectors - High-efficiency 11 kW vacuum pump integrated into the machine frame - Monolithic frame - Axes driven by linear roller bearings and precision rack-and-pinion system Configuration includes: - One electric oscillating knife module - One pneumatic oscillating knife module - Two tangential modules - Two creasing modules - One 3kW milling module (60,000 rpm) - Two laser pointers - Two marking tools - External dust extractor for milling (3.45 kW) - Seeker System PRO - Video projection system onto the worktable - Twin-Cut software for optimizing the workload of both cutting heads to maximize performance and output The Elitron flatbed cutter is installed in our demo showroom. Inspection and testing are welcome. Installation and training services can be provided for an additional fee.

Condition: like new (used), Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2026-078, working width: 1,600 mm, working height: 100 mm, warranty duration: 6 months, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Podpfx Adowgc I Rjxerc • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Year of construction: 2024, operating hours: 5 h, condition: new, functionality: fully functional, The NOMA NOWICKI KN-60 cutter is a high-speed meat cutter with a 60-liter bowl, manufactured in 2024, designed for grinding, emulsifying, and mixing meat, fat, and other raw materials in small and medium-sized food processing plants and food service companies. The machine is equipped with a microprocessor-based control system with memory for 40 processing programs, stepless speed control for the blades and bowl, hydraulic unloading, and a hygienic design that facilitates cleaning. Replacement parts are included. The mixing function with reverse blade rotation (from – 200 to – 400 rpm) allows the filling to be gently mixed without further grinding. Once the process is complete, the finished mixture is discharged hydraulically, with an adjustable discharge disc speed, for both dry and liquid mixtures. All operating parameters are controlled by a microprocessor, which can store up to 40 processing programs. Key Features of the NOMA NOWICKI KN-60 meat cutter A wide range of blade speeds, smooth adjustment of blade and bowl rotation speeds, and the ability to select different blade combinations provide great flexibility when changing recipes and product consistencies. Reverse mixing, the ability to save 40 programs, and high hourly throughput ensure consistent stuffing quality with short processing times. The cutter’s design facilitates hygiene and operator comfort: all food-contact surfaces are polished, flat surfaces are angled at 3° to allow water to drain, and the covers open for cleaning. The high product entry threshold, the bowl rim, the opening in the lid for adding spices during operation, quick access to the blades, and the sound-dampening lid improve ergonomics and working comfort. Technical Specifications of the NOMA NOWICKI KN-60 meat cutter Manufacturer: NOMA (NOWICKI MACHINERY) Machine type: high-speed cutter Model: KN-60 Year of manufacture: 2024 Power supply: 3 x 400 V, 50 Hz Marking: CE, manufactured in the EU Bowl capacity: 60 L (60 dm³) Blade shaft speed: 200 – 6,000 rpm, continuously adjustable Mixing speed (reverse rotation): from -200 to -400 rpm Bowl speed: continuously adjustable Blade combination selection: Yes, choice of blade sets Prjdpfx Adoz S Iafexsc Cutting technology: “air cutting,” optimized bowl and blade geometry Unloading: hydraulic, adjustable unloading disc speed, optional stepped disc Control: microprocessor-based, memory for up to 40 processing programs Length: 1650 mm Width: 1,310 mm Height with the cover lowered: 1,190 mm Height with cover raised: 1,850 mm Control cabinet dimensions: 800 x 800 x 300 mm Weight: 1,350 kg Hygiene: polished food-contact surfaces, flat surfaces angled at 3°, removable covers, and a bowl drain hole for easy cleaning Ergonomics: high product entry threshold, bowl rim, opening in the lid for adding spices during operation, quick access to blades, sound-dampening lid Replacement parts: included