Used Cutting for sale (14,032)

Condition: used, machine/vehicle number: 14064, Rotor diameter: 500 mm Rotor width: 840 mm Rotor knives: 5 Stator knives: 4 Feed opening approx.: 840 x 500 mm Fedpfoyyrhtox Aa Aepf Drive motor: 55 kW

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, Beam on: 17,540 h Fjdpfxsyyyile Aa Aspf Laser on: 45,508 h

Condition: used, machine/vehicle number: 14083, Rotor diameter: 600 mm Rotor width: 1450 mm Rotor knives: 5 rows Fpedpfsyyd Swex Aa Ajf Stator knives: 2 rows Infeed cross-section approx. 1450 x 700 mm Drive motor: 75 kW

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Storage location: Nattheim Fjdpew Sy T Hsfx Aa Aspf

Condition: excellent (used), CATALOGUE NUMBER 7065 TECHNICAL DATA - Max. saw blade diameter: 300 mm - Spindle diameter: 30 mm - Blade guards: 2 pieces - Pneumatic cutting (up/down blade movement) - Saw units adjustable at 45° Fpjdpfeyyyw Aox Aa Ajf - Manual spacing adjustment of the saw units - Min. cutting length at 90°: 220 mm - Max. cutting length at 90°: 2820 mm - Cutting width: 110 mm - Cutting height at 90 degrees: 90 mm - Pneumatic clamps: 2 pieces - Foot switch - Material support - Main motor: 2×1.6 kW - Dimensions (L/W/H): 3620x1100x1250 mm - Weight approx. 500 kg – Unpainted – Tilting saw units – Used saw, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR depending on the exchange rate 4.2 EUR (Prices may change with higher fluctuations)

Condition: excellent (used), functionality: fully functional, Catalogue number 7364 TECHNICAL DATA - max. workpiece height: 160 mm - spindle working length: 250 mm - spindle diameter: 40 mm - max. tool diameter: 220 mm - working table (L/W): 410x1000 mm - motor: 11 kW - 2 pneumatic material clamps - extraction port diameter: 160 mm - dimensions (L/W/H): 1070x1260x1400 mm - weight: 650 kg ADVANTAGES – Made in Germany – Additional set of cutters + copy template Fjdpfsx Sylqsx Aa Ajpf – Not repainted – Used milling machine, in very good condition Net price: 33,900 PLN Net price: 8,070 EUR according to 4.2 exchange rate (Prices may change with significant exchange rate fluctuations)

Condition: used, Year of construction: 2006, BOTTERO 520 LAM-37 – Year 2006 Cutting table for laminated glass Fixed worktop with flap Air cushion Max cutting length: 3,700 mm Min. cutting length: 250 mm Thickness: 3–10 mm (monolithic) Fpsdpfxsyzrk Rj Aa Ajf 2+0.38+2 mm min. (laminated) 8+4.56+8 mm max. (laminated) Speed: 100 m/min Installed basic power: 15 kW

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 22,500 h, control type: CNC control, degree of automation: automatic, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser source manufacturer: Rofin, laser source model: DC 025, laser power: 2,500 W, pipe diameter (max.): 140 mm, pipe length (max.): 8,500 mm, table length: 8,500 mm, working length: 8,500 mm, travel distance X-axis: 8,500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 95 mm, workpiece weight (max.): 4,000 kg, type of input current: three-phase, compressed air connection: 6 bar, overall weight: 10,000 kg, total length: 17,536 mm, total width: 4,604 mm, total height: 2,237 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, 2006 BLM Adige LT712D Tube Laser Machine Manufacturer: BLM Adige Machine Model: LT712D Laser: Rofin Sinar series DC K 2.5kW Laser source. Year: 2006 Infeed: 8,500mm Outfeed: 6,500mm Condition: Very Good Hours: 22,500hrs Availablility: Immediately This 2006 BLM Adige LT712D is a high-performance CNC tube laser cutting system designed for precision processing of mild steel, stainless steel, and aluminium tube profiles. Known for its reliability and accuracy, the LT712D is one of the most capable mid-range tube laser platforms, delivering clean, repeatable cuts with full automation from loading to unloading. With only 22,500 operating hours, this machine is in very good condition and has been maintained to OEM standards. It offers exceptional value for fabrication companies, structural steel specialists, subcontractors and manufacturers looking for a high-precision tube laser with proven durability. ⭐ Key Machine Specifications Working Capacity & Tube Dimensions Minimum tube length: 3,200 mm Maximum tube length: 8,500 mm Round tube diameter: Ø12 – Ø140 mm Square tube: 12 – 120 mm side dimension Rectangular / flat-oval: up to 170 mm circumscribed circle, min. side 10 mm, max. side 140–150 mm Max bar weight: Linear: 15 kg/m Total (L=8500 loader): 130 kg Machine Dimensions & Weight System footprint (L=8500 version): 17,536 × 4,604 × 2,237 mm (complete system) 13,595 × 4,604 × 2,237 mm (machine body) Machine weight: approx.10000 daN (= 10 tonnes) Laser, CNC & Automation CNC Control: Siemens Sinumerik 840D Laser Source: Rofin DC-K Series Cutting Head: Autofocus head with capacitance sensor + collision protection Working Axes: X travel: 8,500 mm Y travel: 400 mm Z travel: 95 mm A-axis: spindle rotation A1-axis: steady rest rotation V-axis: Bar support on the machining line (90mm) W-axis: Unload piece support (85mm) X1-axis: steady rest travel (610 mm) Loader & Unloader Automatic bundle loader with alignment, measuring & singularisation system Scimitar-style tube transfer system for smooth transition to machining line CNC-controlled tube support system with 5 active support groups Intelligent cut-piece unloader with conveyor belt for short parts up to 300 mm Extraction & Cooling Systems Fume extraction: 2,000 m³/hr with high-efficiency filtration system Cooling: MTA TAE 121 chiller, 260-litre cooling circuit reserve Hydraulics: 25-litre tank, 25 L/min pump, 70 bar system pressure 🟢 Condition & Availability Year: 2006 Hours: 22,500 (very low for a tube laser) Condition: Very Good – well maintained, clean, fully operational Availability: February–March 2026 Fpodox Ddagspfx Aa Asf Includes: Full machine, loader, unloader, chiller, documentation supplied. Why the LT712D Is a Top Choice The BLM Adige LT series is widely regarded as the benchmark for tube laser systems. This LT712D stands out thanks to: ✔ Exceptional tube cutting accuracy ✔ Reliable automatic loading & unloading ✔ High-quality Rofin laser source ✔ Full CNC control of every movement ✔ Capability to handle a wide range of profiles ✔ Heavy-duty industrial build quality (10 tonnes of rigidity) For fabricators looking to increase productivity, quality, and automation, the LT712D is an ideal investment. Notes: *Specifications are given in good faith but not guaranteed*

Condition: new, Year of construction: 2025, Laser power: 6000 Watt Round tube: 20 - 350 mm Square tube: 20 x 20 - 350 x 350 mm Rectangular tube: 20 x20 - 350 x 350 mm Max. positioning accuracy X,Y axis: 0,05/1000 mm Max. positioning accuracy U axis: 0,05/1000 mm Max. steel: 14 mm Max. stainless steel: 10 mm Fedpfoxgc Arox Aa Aepf Max. aluminium: 10 mm max. tube weight: 1200 kg Length: 17296 mm Width: 4271 mm Height: 2933 mm

Condition: new, Year of construction: 2026, Laser power: 12000 Watt Working range laser: 6100 x 2550 x 440 mm simultanious: 150 m / min Max. positioning accuracy X,Y axis: 0,05 mm Max. brass: 25 mm Max. steel: 30 mm Max. stainless steel: 30 mm Max. aluminium: 25 mm Max. copper: 10 mm Max. workpiece weight: 4700 kg Length: ??? mm Fpjdpfx Asyynmroa Aof Width: ??? mm Height: ??? mm Machine weight: 14200 kg Electrical connected load: 62 kW

Condition: new, Laser power: 12000 Watt Working range laser: 6100 x 2050 x 440 mm simultanious: 150 m / min Max. positioning accuracy X,Y axis: 0,05 mm Max. brass: 25 mm Max. steel: 30 mm Max. stainless steel: 30 mm Max. aluminium: 25 mm Max. copper: 10 mm Max. workpiece weight: 4700 kg Length: 12000 mm Width: 5000 mm Height: 2200 mm Machine weight: 14200 kg Fodpfx Aaoxaykye Aopf Electrical connected load: 62 kW

Condition: excellent (used), Year of construction: 1979, Ulmia 1725 Precision Sliding Table Saw Precision miter cuts and fine joinery work. Saw blade adjustable in height and tilt. Saw blade swivels from 0-45 degrees according to scale and can be set precisely to the desired cutting height in any position. Fedjyxx D Sepfx Aa Aopf Tabletop with removable table insert and one guide groove each to the left and right of the saw blade. Slides longitudinally on ball-bearing segments in hardened and ground guide tracks, with return spring. Table size: 1100 x 700 mm Minimum distance from saw spindle to top of table: 60 mm Saw blade height adjustment: 60 mm Max. saw blade diameter: 350 mm Max. cutting height: 115 mm Cutting width to the side of the blade (normal): 360 mm Saw blade bore: 30 mm Table travel (normal): 430 mm Saw spindle speed: 4,500 rpm Motor power: 2.2 kW Height to top edge of table: 880 mm Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Trumpf TC500-1300 including Sheetmaster, powered on Fpsdpjyybc Hjfx Aa Aef

Condition: good (used), functionality: fully functional, Year of construction: 2009, Working area: 3000 x 1500 mm Laser power: 5000 W Sheet thickness for mild steel: 25 mm Fpedpfx Asyyn Rqoa Ajf Sheet thickness for stainless steel: 20 mm Sheet thickness for aluminium: 12 mm Machine weight approx.: 12,000 kg Operating hours: NC ON hours: 38,900 h Laser ON hours: 39,498 h Beam ON hours: 18,649 h (Status as of: 22/01/2026)

Condition: used, Fully automatic RATTUNDE line ACS100/2 integrating: · cutting, · brush deburring, · facing / chamfering, · 100% length control, · automatic robotic packing with double output system · and very large set of tooling. Designed for high-precision single or double cuts. One of the fastest tube cutting machine on the market. TECHNICAL DATA Cutting diameters: 10 - 100 mm Entry length: 12.000 mm Cutting length: 25* - 2.000 mm (*25 - 150 mm with special tooling) Performance: Up to 1.500 pieces/hour SCOPE OF SUPPLY 1. BM 8 bundle loading magazine in light construction 2. ACS 100/2 Cutting production system with piece counter 3. Brush deburring machine BDM Fpjdeyz Rvxspfx Aa Aef 4. Chamfering machine CFM 5. Length measuring device Pi 6. Automatic stacking robot SRT 7. Safety fence with light barrier to secure the BM bundle loading magazine 8. Step conveyor SCB for the transport of pieces 9. Conveyor for test tubes 10. Complete set of tooling 11. Switch cabinet & control system for the complete line Performance: Up to 1.500 pieces/hour Cutting diameters: 10 - 100 mm Entry length: 12.000 mm Cutting length: 25 - 2.000 mm (25 - 150 mm with special tooling) Thickness: From 0,5 mm to solid

Year of construction: 2008, condition: excellent (used), Maximum cutting length : 5000 mm Engine size : 2 x 2,2 Kw Fpodpfxoyz Sxuo Aa Aof Sawblade diameter : 2 x 400 mm Sawblade rpm : 2800 Digital display with Electronic positioning of lenght Memory function with 99 positions. 2 x + 45/ - 45 degree angle cut ( Automatic positioning ) 4 x pneumatic clamps Central lubrication of sawblades ( Cooling ) EMMEGI dust collector with fan included Can be examined in working condition

Condition: good (used), functionality: fully functional, Year of construction: 2018, control type: CNC control, controller model: Siemens Sinumerik 840D, laser type: fiber laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 14 mm, sheet thickness aluminum (max.): 12 mm, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,530 mm, travel distance Z-axis: 160 mm, Equipment: documentation/manual, Machine DURMA HD-FL 3015 III – 4 kW Year of manufacture: End of 2018 (as new) — Technical Data • Working area (X-Y-Z): 3060 × 1530 × 160 mm • Max. sheet size: 3048 × 1524 mm • Max. sheet weight: 200 kg/m² Maximum sheet thicknesses: • Mild steel: 20 mm • Stainless steel: 14 mm • Aluminium (AlMg3): 12 mm Dynamics & Precision: • Travel speed X-Y: 200 m/min • Synchronisation speed: 280 m/min • Acceleration: 20 m/s² • Positioning accuracy: ± 0.02 mm • Repeatability: ± 0.1 mm — Standard Equipment • CE-compliant version with shuttle table & light curtain safety system • Siemens SINUMERIK 840D CNC control • Precitec ProCutter cutting head F150 (auto-focus) • Automatic pallet changer system • Automatic sheet inspection (position & size) • Positioning laser diode • Automatic nozzle cleaning • Central lubrication system • Chip conveyor • User interface (power / speed / pressure) • External Metalix CAD/CAM software with autonesting • Illuminated working area • Multi-chamber extraction system • Warning beacon — Special Accessories • IPG 4000 W fiber laser source incl. chiller & compact extraction unit • Motorized chip conveyor • Linear drives for X1, X2, Y axes • Laser service kit Fjdpfjynbbqjx Aa Aopf • Automatic nozzle changer • Additional Metalix license — Special Arrangements • Roller container for slag & small parts (operator side) • Laser source, chiller & extraction system mounted above the machine • Machine frame to be manufactured by the customer

Condition: like new (used), Year of construction: 2025, Horizontal thin-cut band saw with 3 heads 300 mm working width With 3 cutting heads, to make max 4 slats in one run New 2025 model with bigger wheels and inverters on wheels. Touchscreen Schneider, PLC and Inverters Schneider Germany Fodpfxsvwbg Uo Aa Aopf 970mm wheels for higher cutting speed Frequency controllers on the wheels for adjustable cutting speed. For slats from 2 mm * same as new *

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Horizontal thin-cut band saw 300 mm working width, tillable 12 degrees New 2025 model with bigger wheels and inverters on wheels. 80 mm blade width Fodpfx Aoywibrea Ajpf Touchscreen Schneider, PLC and Inverters Schneider Germany 22.0 KW saw motor Bigger wheels for higher cutting speed Frequency controllers on the wheels for adjustable cutting speed. For slats from 2 mm * same as new *

Condition: used, Year of construction: 1989, sheet thickness: 8driving power: 18,5weight approx.: 5800messurements (LxWxH): 2130 x 3260 x 2360sheet length: 1550Technical Data: Max. cutting length: 1,550 mm Throat depth (side clearance in frame): 50 mm Sheet passage: 16 mm Cutting angle adjustable: 0.5° – 2°30′ Strokes per minute: 25 – 32 Number of hold-downs: 8 Cutting pressure: 280 bar Oil capacity: 300 liters Total connected load: 20.1 kW Overall dimensions (L × W × H): 2,130 × 3,260 × 2,360 mm Equipment: CNC control SIEMENS S5 for numerical sheet metal backgauge control Fjdpfx Aasvaatlj Aepf Sheet support device with motorized scrap separator Sheet discharge with conveyor belt Blade clearance and cutting angle programmable via control Spare blades included Shear blades suitable for material up to 750 N/mm² tensile strength Separate hold-down operation for cutting along marked lines Hold-down pressure adjustable and readable from the front 2 swing-away backgauges Finger guard with handle recess Ball rollers integrated in the support table Angle gauge with vernier scale Foot switch Condition:Used, in good condition

Condition: used, Year of construction: 1989, sheet length: 3.100sheet thickness: 8,0cutting area width: 3100total power requirements: 11weight approx.: 7500messurements (LxWxH): 4180 x 2150 x 2000 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Fsdpfx Aajyy Tqce Aepf Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Year of construction: 1968, condition: excellent (used), functionality: fully functional, STC-Ref:G-791-0181 WUPA Typ: KERMA TS-II, die cutting machine, Year: 1968 paper format: max. 624 x 890 mm equipped with: - speed: 36 strokes/min - Stroke punch for die cutting - die cutting thickness bis / up to 2,00 mm - 1.300 gr² - machine weight 4.500 kg - punch - German safety standard Fsdjxwn Nropfx Aa Aepf --> available: 12/2025

Condition: excellent (used), Year of construction: 2019, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 8135.44, cutting height (max.): 100 mm, cutting depth: 300 mm, Great saw always cuts to 0.5 for age hardy used Fodoyngniopfx Aa Aepf

Condition: excellent (used), Year of construction: 1985, machine/vehicle number: 5561703, Format (cm): 76 Equipment / Additional information: Side tables, air table, 1x reserve knife Fpsdpfsydcuqox Aa Aef

Condition: good (used), Year of construction: 2008, machine/vehicle number: 0-260-20-1170, Kantfräs & kap Brandt Type: Optimat FTK 130 No: 0-260-20-1170 Year: 2008 The FTK 130 has been conceived as complementary to edge banding machines. The main application of the FTK 130 is shaped workpieces, where Fpjdpfx Aajq Ehpas Ajf internal as well as external radie can be processed. Also straight workpieces can be easily processed. Shaped workpiece trimming technology For small shops the FTK 130 is offering a flexible and cost effectiv solution for their trimming requirements. In order to process internal and external shapes, the trimming motors are mountedvertically. Milling and cutting units for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radie. Cutting unit to precisely cut excess front and back edge trim material. in the longitudinal direction of the working pressure. Techn info: Milling unit Workpiece thickness approx. 12-55mm Workpiece width min approx. 30mm Inner radius min.ca.35mm Edging thickness max. approx. 3mm Milling tool 2xWPL radius cutter r=3, diameter 67x21x16mm Milling motors 11000v/min Cutting unit Workpiece thickness 12-55mm The thickness of the edging material max. 3mm Saw blade diameter 100mm Sawing width 3mm Center hole 36mm Compressed air 6 bar, connection 1/2", approx. 2000PA Air consumption per stroke approx. 10NL Extraction power diameter 80mm, 510m3/h, air speed 28m/sec Current 400 volts, 2.5kw 50 hz, 3 phase, 16A Dimensions: 1130x765x1480mm (lxwxh) Weight 320 Kg Stock no: 2001877BXA