Used Cuve Inox for sale (438)

Condition: excellent (used), Machine ready for operation Blsdpfx Aoyk Ipaefted Gate dimensions: Height: 33 cm Width: 50 cm Belt length: 245 cm Machine frame: stainless steel (Inox)

Condition: used, total length: 6,500 mm, total width: 2,400 mm, total height: 2,000 mm, Empty weight: 23.000 kg Plate roller Sheet metal roller Model: Hydraulic Model: 4-Roller! Manufacturer: Chr. Haeusler (Switzerland) Type: VRM HY L4000x6 Working width: 4100mm Max. sheetthickness: 6mm (Inox) - 14mm (Alu) Upper-roller: 350 mm Other rollers: 250 mm Incl. conical bending Incl. hydraulic retraction-assist Machine-weight: 23000kg Video's available before dismantling. - Documentation available: No - CE certificate present: No - Drive system: Conventional Bsdpfxox U Dmwj Afteld - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 4 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 4100 - Top roll diameter [mm]: 350 - Bottom roll diameter [mm]: 250 - Options: Plate support, Cone rolling - Transport dimensions: 6500mm x 2400mm x 2000mm (l x w x h) - Transport weight [kg]: 23000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, -Dimensions LxPxH: 1200x2200x1500mm -Vitrine de forme ovale avec un design sophistiqué -Finition en bois stratifié pour une esthétique raffinée et une intégration parfaite dans un environnement haut de gamme pieds en inox, assurant robustesse, durabilité et hygiène optimale *Système de Présentation : -Deux niveaux d’exposition : -Premier niveau (plateau réfrigéré) : 12 cloches en verre (Ø 23 cm) Njyew Elr Ae Tdxugoda -Deuxième niveau (plateau supérieur ovale) : 4 cloches en verre (Ø 23cm) -Système breveté "No Fog", garantissant une transparence parfaite et sans condensation Bedpfsw Elr Asx Aftjld -Système d’élévation manuel des cloches, facilitant l’accès aux produits * Éclairage et Conservation : -Éclairage LED intégré, assurant une mise en valeur subtile et élégante des produits -Plateau réfrigéré intégré, garantissant une conservation optimale pour les produits frais -Hauteur totale :1500 mm (y compris les cloches) -Hauteur du premier plateau réfrigéré : 900mm (ergonomique et accessible) -Hauteur du deuxième plateau : 1200 mm -Hauteur des cloches en verre : 450 mm

Condition: new, maximum load weight: 48,010 kg, overall weight: 66,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete range of vehicles, including those available immediately and at short notice, on our website. Excerpts from the equipment list are detailed below. Full equipment details on request. Gooseneck: * Gooseneck in SNT design to optimize load bed length, approx. 3,700 mm long * Gooseneck hydraulically liftable/lowerable and detachable * For tractor units: 6x4 or 8x4 Low-bed: * Low-bed with external beams, extendable design, SUPER LOW design, approx. 7,550 mm long * Low-bed with fixed hardwood floor, approx. 40 mm thick, and mechanical lock * Supply lines run protected in the extendable beams and automatically adjust to the respective low-bed length * 7 pairs of lashing rings, foldable outwards (approx. LC 10,000 daN) * 6 pairs of threaded blocks on the inner beam for mounting screwable RUD rings Rear undercarriage: Blodexbmprjpfx Aftjd * Rear axle assembly with closed outer frame, checker plate surface and continuous prism excavator recess, approx. 1,450/900 x 505 mm, open at the rear * 2 pairs of lashing rings, foldable outwards (approx. LC 10,000 daN) * 1 pair of lashing rings, horizontal in the recess (approx. LC 10,000 daN) * 2 pairs of lashing rings, horizontal in the recess (approx. LC 16,000 daN) * 2 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame PENDLE AXLE: * PENDLE AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on the axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and locking pins for securing in raised position * Technical axle load: 12,000 kg each * Hydraulic axle compensation * Axle tools Tyres: * Tyres 245/70 R 17.5 3PMSF – manufacturer of our choice * Load index (146/146F) Braking system: Wabco brake system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Painting: * Complete steel structure automatically shot blasted with throw wheel system after welding * Second blasting using corundum for optimal adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure the best corrosion protection * Final painting: 2 layers of 2K topcoat, single-color RAL 3002 Carmine Red per RAL system 841GL Including the following accessories: * Preparation for the mounting of bolted container positions for 1x 20' or 1x 40' container on the external beams * Without container locks * 3.5 inch king pin * One galvanized steel front wall, approx. 400 mm high * Remote steering operation by cable at front and rear with push-button control, including single-track control of axles (installation in the tractor unit not included) * Electro-hydraulic unit * On the gooseneck: plug-in aluminium side walls and tailgate, approx. 2,000 x 400 mm (L x H) * The rear galvanized plug-in stakes are removable (body length approx. 2,120 mm) * Hydraulic connections from gooseneck to low-bed with multi-coupling instead of threaded couplings. No guarantee for seals * On the gooseneck, a separate air connection with air gun * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area * One INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck * 2 pairs of screwable lashing rings M20 (LC 5,000 daN) * 2 pairs of screwable RUD rings VLBG-4 M24 (LC 8,000 daN) * Folding extensions, approx. 230 mm wide per side, extension planks made of hardwood. The maximum load is on an area of approx. 200x2

Condition: new, maximum load weight: 48,300 kg, overall weight: 71,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including units available for immediate and short-term delivery, on our website. Extract from the equipment features. Full specification available on request. GOOSENECK: * Gooseneck with integrated 1-axle running gear (pendulum axle) in detachable design * Gooseneck hydraulically liftable and lowerable, including hydraulic coupling connected with the hydraulic axle compensation of the first axles * Length: approx. 5,200 mm, with a front taper of approx. 60° * Saddle load according to data sheet: W25-DSR2700-12/22.7 * For tractor units: 6 x 4 or 8 x 4 * Front bulkhead made of steel, detachable, approx. 400 mm high, with chamfered design * 1 pair of mechanical supports at the front of the gooseneck * ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets * 1 spare wheel holder inside on the front bulkhead of the gooseneck with lifting arm * 2 pairs of recessed lashing rings on the gooseneck (LC 2,500 daN) * 2 pairs of recessed lashing rings in the outer frame of the front chassis, foldable outwards (LC 10,000 daN) Blodpjyhkqnjfx Afted * 1 pair of lashing rings at the transition between chassis and loading platform (LC 10,600 daN) * On the gooseneck, 1 pair of plug-in side aluminium drop sides, approx. 400 mm high, anodized finish * On the gooseneck, 1 plug-in aluminium tailboard, approx. 400 mm high, anodized finish * 3.5-inch king pin * TPMS tire pressure monitoring system compliant with ECE R 141 * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 1 INOX toolbox with 1 lid, mounted on top of the gooseneck on the right in the direction of travel near the aluminium drop side, approx. 1,350 x 400 x 400 mm (L x W x H) LOADING AREA: * Lowbed with external main beams, designed as a telescopic loading platform in low-profile layout with front extension including a fixed approx. 50 mm hardwood floor * Length x width approx. 8,000 mm x 2,740 mm * Mechanical pin-lug coupling from the lowbed to the chassis to exchange the platform or install extension beams * 1 locking position every approx. 500 mm in the extension section * 4 pairs of recessed lashing rings arranged lengthwise on the loading area, distributed along the outer frame/main beam (LC 10,000 daN) * 1 lashing ring per side on the outside of the rear crossmember (LC 10,000 daN) * Foldable widening sections, approx. 230 mm per side (WITHOUT timber planks) * Detachable widening planks, steel-edged * Preparation for installation of bolt-on container positioning devices for 1x 20' or 1x 40' container on the main beams. Container locks not included * 6 pairs of threaded blocks between the lashing rings under the upper flange on the main beam for mounting screw-type M24 rings (LC 8,000 daN) * 2 pairs of M24 screw rings (LC 8,000 daN) included REAR RUNNING GEAR: * Rear running gear with closed external frame, checker plate decking and continuous prism-shaped excavator recess, approx. 1,450 x 900 x 505 mm, open at rear * Pendulum axle, all axles hydro-mechanically forced steered * Hose burst valve on the axle compensation cylinders with automatic reset function * Hydraulic cylinders with shut-off cocks and pre-insertion facility for securing in raised position * Final paint on axles in 2 coats of 2-pack paint, solid colour DB 7350 Novagrau * Technical axle load: 12,000 kg each * Hydraulic axle compensation * 245/70 R 17.5 3PMSF. Brand at our discretion * Remote steering from front and rear via cable-control, with axle alig

Year of construction: 2026, condition: new, The semi-automatic filler is the perfect solution for small companies that produce up to 5000 bag-in-boxes per year. The system is equipped with: an electromagnetic flow sensor; an electronic control panel - for programming the filling quantity (minimum 1 liter) and - for performing the calibration; and a self-priming pump with a EURO 20 rubber impeller. At the beginning and at the end of the cycle, the vacuum should be controlled by the user and the injection of nitrogen should be managed by means of two manual pulsar valves. The valve is opened and closed using the two stainless steel tools supplied as standard. Drip collector buffer is included in the scope of delivery. The inox holder of Bags has an adjustable height and can be removed. The user selects the desired filling quantity and turns the switch on so that the filling cycle can begin. The filler performs a complete cycle: Opening the valve / Starting the pump / Stopping the pump / Closing the valve. - Touch screen operation for programming capacity and calibration; - Digital flow meter max. 7000 l/h - Stainless steel table with adjustable and removable support, with 4 adjustable feet - Stainless steel filling head - Pulse valve for manual nitrogen injection - Blocking system for the filling head Bodpfx Afetpxtijtsld - Drip-free filling - Automatic start and stop for an external pump - Double semi-automatic system for opening and closing the connection - Capacity for filling flexible bags or pouches (high or low type) from 1 liter capacity - S/S- Suitable for cleaning circuit (CIP) Technical data: - Electrical requirements: 220V 50-60 Hz - Suitable for: Ø 20 - 25 mm - Capacity: 5 lt/h 150 pcs. - Capacity: 10 lt/h 100 pcs. - Capacity: 20 lt/h 40 pcs. - Dimensions: 740x900x720 mm - Weight: 50 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, Laser cutting 569 working hours Last technical revision: 10.02.2023 6000W fiber laser source with cooling module Max length: 3048mm Max width: 1524mm Z axis: 100mm Maximum sheet weight: 750kg Maximum cutting thickness Mild steel: 25mm Stainless steel: 20mm Aluminum: 20mm Copper 8mm Bsdpomzbkrjfx Aftold Comes with software: PARTS.L - production management ADDIN.SOLIDWORKS - integration between Solidworks and streamlaser STREAMLASER - CAM and Nesting VALUES.L - production cost estimate Computer with Intel Xeon W-2123, Nvidia Quadro P2000, 16gb RAM The machine is like new, in working condition

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, REF: MM5728 1 x Zumex Food Engineering commercial cold press juicer.  The Mastery represents Zumex’s cold press commercial system for all types of fruit and vegetable juices, leading the way with its crushing efficiency and power, thanks to its shredder discs and its Brushless motor. It also has a 11-ton press, which is more compact than any other press of its category to obtain quality juice. Technical specification ⚙️ ✅ Manufacturer - Zumex Food Engineering ✅ Model - MASTERY.  ✅ Serial number - 475186. ✅ Date of manufacture - 2021. ✅ Production capacity - from 30 L/h up to 110 L/H. ✅ Motor - Brushless. ✅ Deposit capacity - 3 litres. ✅ Dimensions - 940mm L x 735mm W x 1700mm H. ✅ Touch Control Display - 4.3" Colour. ✅ Material - INOX. ✅ Pression Power - 11,000 kg.  ✅ Electrical requirements - 220-240 V / 50 hz / 1 phase. Notes 🗒️ Suitable for soft fruit, hard fruit, vegetable greens or a mix of those three products.  Blodpfxst Uim Ho Afted Videos available on request. 

Condition: good (used), Year of construction: 1964, functionality: fully functional, feed length X-axis: 700 mm, feed length Y-axis: 250 mm, feed length Z-axis: 490 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 490 mm, total height: 1,720 mm, total width: 1,920 mm, total length: 2,250 mm, table width: 305 mm, table length: 1,100 mm, overall weight: 2,000 kg, space requirement width: 1,920 mm, space requirement length: 2,250 mm, space requirement height: 1,720 mm, Equipment: documentation/manual, We are offering this well-maintained Schaublin 53 milling machine, year of manufacture 1964. Serial number: 271090 Technical specifications – Schaublin 53 N Model: N Longitudinal table travel (X): 700 mm Vertical travel (Z): 490 mm Cross travel (Y): 250 mm Clamping surface of the table: 1100 × 305 mm Bsdpfx Asyhm D Djftsld Number of T-slots: 5 Maximum T-slot width: 14 H7 mm Spindle taper (internal taper milling arbor): ISO 40 Spindle bore: 25.2 mm Main motor: 3 / 1500 kW·RPM Rapid traverse feed motor: 1.2 / 3000 kW·RPM Power: 5.1 kW Rapid traverse speed: 3500 mm/s Dimensions (L×W×H): 2250 × 1920 × 1720 mm Weight: 2000 kg Documentation available If you have any questions or need more information, please feel free to send us a message or call us.

Condition: used, -Inox parallepipedique 1544 litres Tare 255 kg / epreuve 0,65 bar Palettisable et gerbable Trappe superieure diamètre 450 mm hermetique Vidange d.50 Agréé transport Blodpfx Afex Rz Taotsd Encombrement : 1000 x 1200 x ht 1850

Condition: used, 17 tonnes Bledpfox Rz R Sjx Aftod 15 m3 Inox Agitated tank 15 m3

Condition: good (used), Vernier caliper, caliper gauge, caliper gauge, vernier caliper -Manufacturer: Schweitzer, INOX caliper with fine adjustment -Measuring range: 0-800 mm -Reading accuracy: 0.02 mm -Dimensions: 980/180/H16 mm -Weight: 1.9 kg Bljdpfxst U Tp So Afted

Condition: used, Vernier caliper, caliper gauge, caliper gauge, vernier caliper Bjdst U Tqiepfx Afteld -Manufacturer: Hommel INOX caliper caliper with fine adjustment -Measuring range: 0-600 mm -Reading accuracy: 0.1 mm -Dimensions: 740/240/H15 mm -Weight: 1.2 kg

Condition: new, loading space volume: 60 m³, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2026, Equipment: ABS, OMEPS Tipping Silo Semi-Trailer ---- Model: CR 60 Chassis: Two fully automatically welded I-section longitudinal beams with welded cross members, chassis width 1,400 mm, 2" kingpin, tipping cylinder: Hyva Axles and suspension: 22.5" disc brake SAF axle units, 3 x 9 t with air suspension, axle spacing 2 x 1,310 mm, raise/lower valve, loading manometer mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, first axle liftable (not equipped for tractor unit), third axle liftable with Wabco Optiturn Bledpfx Afex Nuf Totod Wheels and tires: 6 wheels with tires size 385/65 R22.5, as per manufacturer’s specification on Alcoa Dura Bright aluminum rims 11.75x22.5 ET 120 Braking system: EBS 4S/2M WABCO compressed air braking system with RSS, compliant with standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing gear: Mechanical landing legs with two speeds, 2 x 20 t static load with swivel foot, rear support with crank stands Electrical system: All lights in LED version, 24 Volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis carrier, amber side marker lamps as required, rear position lights, front marker lights, rear license plate lights, lamps according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps fitted at swivel joint height in aluminum holders in accordance with standard 97/28/CE-2007/35/CE, 1 LED work lamp on the tank, yellow warning beacon at rear at hose tube height, 2x reverse lamps in underrun protection, 2x reverse lamps at the level of the support legs (each switchable at the power console) Tank design: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). One-compartment tank, 60,000 liters capacity. Tank warranty: 24 months from delivery. Operating parameters: Pressure vessel according to the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80° C. Filling options: 5 manholes DN 450 with hinged and folding dome covers. Each dome cover is pressure-tight sealed with 4 wing nuts, rubber support for dome cover on top for storage, rain gutter closed at the front and open at the rear Material discharge: 1 material outlet cone DN 800 made of INOX, foldable with INOX disc for aeration, material outlet cone swivels laterally, DN 150 shut-off valve with white gasket, connection: STORZ-A Air piping: A 2.5" stainless steel air manifold line mounted on the operating side RIGHT, a 4" stainless steel air distribution tube is mounted at the rear of the tank, air valves (butterfly valves) in stainless steel, top air hose and air connection hoses are 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1 m in front of the swivel bearing Ladder and walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety railing can be erected from below using a separate fold-up ladder piece and a parking brake when opened, 1 aluminum safety grating runs along the top left side of the tank, anti-slip coating on the tank Discharge hose storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum...

Condition: new, total width: 2,550 mm, total height: 3,960 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Tipping Silo Trailer—Type: CR 47 Chassis: Two fully automatically welded I-shaped longitudinal beams with welded cross members, chassis width 1,400 mm, 2" king pin, tipping cylinder: Hyva Axles and Suspension: 22.5" disc brakes, 3x 9t SAF axle units with air suspension, axle spacing of 2 x 1310 mm, lift and lower valve, loading pressure gauge mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring system, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn Wheels and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice on Alcoa Dura Bright aluminum rims, size 11.75x22.5 ET 120 Brake System: EBS 4S/2M WABCO compressed air brake system with RSS, according to standard 98/12/CE – ECE R13/09, connected brake wear indicator Bedpfx Afex Nufmjtsld Landing Gear: Mechanical landing legs with two speeds, 2x 20t support load with pivoting foot, rear without landing support Electrical System: All lights are LED, 24 V electrical installation consisting of: one 15-pin socket mounted in front of the fifth wheel plate on the chassis beam, required number of yellow side marker lights, rear position lights, front marker lights, rear license plate lights, lights according to standard 97/28/CE-2007/35/CE, two multifunction rear lights mounted at the pivot height in aluminum brackets according to standard 97/28/CE-2007/35/CE, one LED work light on the tank, yellow warning beacon at the rear, mounted at hose pipe height, 2x reverse lights in underrun protection, 2x reverse lights at landing leg height (each switchable on the power console) Tank Version: A horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-chamber tank, 47,000 liter capacity, tank warranty: 24 months from delivery. Operating parameters: pressure vessel according to Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar – operating pressure 2.0 bar, operating temperature -40° to +80°C Filling Options: 4 manholes DN 450 with swing and hinged dome covers. The dome covers are sealed pressure-tight with 4 wing nuts each, rubber supports on top for dome covers, drip rail closed at the front, open at the rear Material Discharge: 1 material discharge cone DN 800 made of stainless steel, folding with stainless steel agitator disc, material discharge cone can swing sideways, shut-off valve DN 150 with white gasket, connection: STORZ-A Air Piping: A 2.5'' stainless steel main air line mounted right side operations, one 4" stainless steel air distributor pipe mounted at the rear of the tank, air valves (shut-off flaps) in INOX, upper air hose and air connection hoses are in 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1m in front of the pivot Ladder and Walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety scissor guardrail, can be raised with a separate fold-out ladder section from below with parking brake when open, 1 aluminum safety walkway runs along the top left of the tank, anti-slip coating on the tank Delivery Hose Compartment: 4 hose tube containers 5 m long, DN 200, made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum, left side

Condition: used, functionality: fully functional, warranty duration: 3 months, type of cooling: air, welding current (max.): 250 A, For sale: Lascentrum Multimig 250-3 Dual Pulse 250 AMP 400 Volt Gas-cooled Pulse Double Pulse Synergic 2/4 Step 4 Roller drive Steplesly adjustable Bljdpfx Asydv N Isfted Program memory Burnbacktime adjustable Stick option Steel, Inox, and Aluminum weldable Refurbished and tested Including SB360 Mig welding torch, earth work lead with clamp, gas cable, and 3 months warranty. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: new, functionality: fully functional, Year of construction: 2020, We are selling a new exhibition machine from the manufacturer Sahinler. Motorized circular shear with hydraulic clamping Technical data: - max. diameter: 1200 mm - smallest diameter: 220 mm Blodsva Acvopfx Aftjd - max. sheet thickness (ST 42): 3.5 mm - max. sheet thickness (Inox): 3.0 mm - Speed: 6.1 m/min - Motor power: 2.2 kW - Weight: 750 kg - Dimensions (LxWxH): 2000x600x1400 mm - Projection in the sheet metal holding stand: 750 mm - Projection in the shears: 250 mm - Knives made of special steel K 2379 - Hydraulic internal cutting system - motorized centering system - central lubrication

Condition: excellent (used), Holex, Inox, Mitutoyo 2000mm scribe caliper. Price quoted for Holex 2000mm caliper. Blsdpfx Aou Svbaofted

Condition: used, Used stainless steel tank / transport container / IBC Last intended use: Chemical industry Item number: 10884 Capacity: 1,000 litres Type: Vertical, mounted in galvanized stacking frame Material (media-contacting): 1.4301 / AISI304 Manhole: 400mm Version: Single-walled Operating pressure as per nameplate: 0.10 bar Tank dimensions: Overall width: 1,200mm Overall length: 1,000mm Overall height: 1,520mm Materials: Internal: 1.4301 / AISI 304 External parts: Galvanized steel Fittings: Nameplate: Yes Outlet diameter: 47mm Bjdpjydc Auefx Afteld Outlet valve: Ball valve Outlet distance to floor: 235mm Empty weight: 207 kg

Condition: used, functionality: fully functional, grinding belt length: 7,800 mm, height adjustment type: mechanical, working width: 1,000 mm, grinding length: 2,500 mm, table length: 2,900 mm, table width: 1,000 mm, Height-adjustable and movable support table 2.9 m x 1 m. Includes 1x pallet with sanding belts (stainless steel) Includes 1x carrier with vices for clamping bar material Includes 1x sanding disc Includes 1x sanding roller Bsdjx Eimzepfx Afteld

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 03814V2200, functionality: fully functional, operating hours: 2,416 h, input voltage: 380 V, type of input current: three-phase, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 280 mm, number of slots in tool magazine: 1, total height: 2,400 mm, total length: 3,000 mm, total width: 1,200 mm, overall weight: 1,100 kg, table length: 2,200 mm, table width: 280 mm, coolant supply: 3 bar, feed length X-axis: 2,200 mm, feed length Y-axis: 1,200 mm, feed length Z-axis: 280 mm, feed rate X-axis: 7 m/min, feed rate Y-axis: 7 m/min, feed rate Z-axis: 6 m/min, spindle motor power: 4,500 W, number of spindles: 1, rapid traverse Z-axis: 6 m/min, rapid traverse X-axis: 7 m/min, rapid traverse Y-axis: 7 m/min, rotational speed (max.): 18,000 rpm, rotational speed (min.): 1,000 rpm, spindle speed (max.): 18,000 rpm, spindle speed (min.): 1,000 rpm, table height: 1,200 mm, Equipment: rotational speed infinitely variable, NUMERICALLY CONTROLLED PANTOGRAPH WITH VERTICAL PLANE MODEL "VERTICAL 2200 OPEN" WITH 3 INTERPOLATED AXES FOR WORKING MARBLE AND GRANITE basic assembly: - range: x-axis=2200 mm. y-axis=1200 mm. z-axis=300 mm; - work surface L. 2500 x H. 1250 mm; - heavy carpentry-made structure in processed and painted steel; - Side openings with loops, both on the left and on the right, for processing oversized blocks with support rolls; - slabs and carter support in inox steel; - highly deep workbench made with extruded aluminium profile ; - slab locking with n°2 clamps with mechanical blocking device; - three-phase electro spindle hp 5 1/2 gas connection with perforated shaft and rotating joint for water passage for internal and external tool refrigeration, and inverter for variation to maximum 18000 r.p.m .; - openable polycarbonate protection for electro-mandrel, with safety micro; - axes movement by means of runners and sliding blocks of balls recircle; - dust tents for total protection of all moving parts; - water cooling tool system with centralized drain, including pump, decanting tanks and locking electrovalve; - electronic panel with console comprising numeric control, pc and monitor. Windows software included ARTCAM INSIGNA: - carrying out of reliefed and engraved writing, using all "true Type" fonts; Bodpfoygxc Aex Aftsld - cad for carrying out drillings, cuts, engravings, millings and inlays; - import of most common types of files as dxf and dwg to create writings, drawings and stamps, reliefed and engraved logos, showr trays, sinks, arcs and portals; - automatic drilling for inserting bronze letters; - carrying out single and multiple sculptures in high and bas-relief; automatic switch off; 3D PLAN LASER laser copyng system to import manufactured products and tree-dimansional figures (bas and hight - relief) with interface and software for required dimensions

Condition: used, Technical details: measuring range X-axis: 3000 mm indexing: 0,1 mm weight: variable kg No. 1 Caliper/caliper gauge made of stainless and hardened steel Make INOX Blodju N Atwspfx Aftsd Measuring range 0 - 3000mm Reading 0.05mm via vernier Leg length approx. 280mm without measuring tips for internal measurement No. 2 Caliper/caliper gauge made of stainless and hardened steel Make Massi according to TGL Measuring range 2000mm Reading 0.1mm via vernier *

Year of construction: 2015, condition: used, NARDI INTERNATIONAL K 200 WOOD DRYING KILN – 2015 For sale: Industrial wood drying kiln NARDI INTERNATIONAL K 200. The unit is in excellent technical condition, complete and ready for operation. Equipped with LEONARDO 3.0 control system and heat recovery system. —— 1. Basic Specifications Batch capacity: approx. 115 m³ Usable (internal) dimensions: • Width (loading): 10.8 m • Depth: 8.9 m • Height: 4.1 m Loading doors: 10.9 × 4.2 m, sliding Max. drying temperature: 75°C Heating: hot water 80°C, max 2 bar Heating power: 345,000 Kcal/h (401 kW) Power supply: • 400V / 50 Hz • 230V / 50 Hz (control) —— 2. Construction Chamber made entirely of acid-resistant aluminium suitable for oak. Aluminium panels with 140 mm glass wool insulation. Bledpfxjygcw De Aftjd INOX bolts, thermal bridge elimination. External cladding made from trapezoidal sheet with integrated ventilation ducts. Structural resistance: • Snow load up to 120 kg/m² • Wind speed up to 100 km/h —— 3. Air Circulation • 6 tunnel fans (100% reversible) • 4 kW motors, IP55 • High temperature bearings • Individual frequency inverters Provides uniform and energy-efficient drying. —— 4. Heat Recovery • Centrifugal fan • Double heat exchangers • 6 Belimo dampers • PLC control • Acid-resistant INOX ducts System significantly reduces energy consumption. —— 5. Control System CE control cabinet, IP55 rated. PC with LEONARDO 3.0 software (Windows 7). Features: • Multi-stage cycle programming • Parameter archiving • Graphic process visualization • Control of up to 32 chambers —— 6. Sensors • 6 wood moisture probes • 2 temperature probes • 2 EMC probes • RCU module —— 7. Commercial Information • Price: 60,000 EUR / 1 unit • Available: 2 units (2-chamber module) • Module price: 120,000 EUR • Sale only as a 2-unit module • Terms: EXW (38-120 Czudec, Poland) – Incoterms 2020 For enquiries, please contact us via email or WhatsApp.

Year of construction: 2016, condition: used, WOOD DRYING KILN CHAMBER NARDI INTERNATIONAL K 200 – 2016 For sale: Industrial timber drying kiln NARDI INTERNATIONAL K 200. The chamber is in excellent technical condition and ready for operation. 1. Main specifications Batch capacity: approx. 115 m³ Usable (internal) dimensions: • Width (loading side): 10.8 m • Depth: 8.9 m • Height: 4.1 m Loading doors: 10.9 × 4.2 m, sliding Max. drying temperature: 75°C Heating: 80°C hot water, max 2 bar Heating power: 345,000 Kcal/h (401 kW) Bsdpfx Afjygcwwjteld Power supply: • 400V / 50 Hz • 230V / 50 Hz (control) ——— 2. Construction Chamber made entirely of acid-resistant aluminium (suitable for oak processing). Aluminium panels with 140 mm glass wool insulation. INOX screws eliminate thermal bridges. Exterior cladding made of trapezoidal sheet with integrated ventilation channels. Structural resistance: • Snow load up to 120 kg/m² • Wind load up to 100 km/h ——— 3. Air circulation • 6 tunnel fans (100% reversible) • 4 kW motors, IP55 • High-temperature bearings • Individual frequency inverters Ensures uniform and energy-efficient drying. ——— 4. Heat recovery • Centrifugal fan • Double heat exchangers • 6 Belimo dampers • PLC control • Acid-resistant INOX ducts The system significantly reduces energy consumption. ——— 5. Control system CE control cabinet, IP55. PC Computer with LEONARDO 3.0 software (Windows 7). Features: • Multi-stage cycle programming • Parameter archiving • Graphic process visualization • Control of up to 32 chambers ——— 6. Sensors • 6 wood moisture probes • 2 temperature probes • 2 EMC probes • RCU module ——— 7. Commercial information Availability and price: • Price: 50,000 EUR / unit • Available: 4 units (4-chamber module) • Module price: 200,000 EUR • Terms: EXW (38-120 Czudec, Poland) – Incoterms 2020 For inquiries, please contact us via email or WhatsApp.

Year of construction: 2016, condition: used, NARDI INTERNATIONAL K 200 WOOD DRYING CHAMBER – 2016 The machine is in very good technical condition, complete and ready for operation. Equipped with LEONARDO 3.0 control system and heat recovery system. ⸻ 1. Basic parameters Load capacity: approx. 115 m³ Usable (internal) dimensions: • Width (loading): 10.8 m Bsdpfx Afeygcwkstjld • Depth: 8.9 m • Height: 4.1 m Loading doors: 10.9 × 4.2 m, sliding Max. drying temperature: 75°C Heating: hot water at 80°C, max 2 bar Heating power: 345,000 Kcal/h (401 kW) Power supply: • 400V / 50 Hz • 230V / 50 Hz (controls) ⸻ 2. Construction Chamber made entirely of oak acid-resistant aluminium. Aluminium panels insulated with 140 mm glass wool. INOX screws eliminate thermal bridges. Exterior sheathing made of trapezoidal sheet metal with air ducts. Structural resistance: • Snow load up to 120 kg/m² • Wind up to 100 km/h ⸻ 3. Air circulation • 6 tunnel fans (100% reversible) • 4 kW motors, IP55 • High-temperature bearings • Individual frequency inverters Ensures even and energy-efficient drying. ⸻ 4. Heat recovery • Centrifugal fan • Double heat exchangers • 6 Belimo dampers • PLC control • Acid-resistant INOX ducts This system significantly reduces energy consumption. ⸻ 5. Control system CE control cabinet, IP55. PC computer with LEONARDO 3.0 software (Windows 7). Features: • multi-stage cycle programming, • parameter archiving, • graphic process visualization, • control of up to 32 chambers. ⸻ 6. Sensors • 6 wood moisture probes • 2 temperature probes • 2 EMC probes • RCU module ⸻ 7. Commercial information • Price: EUR 50,000 / unit • Available: 4 units (4-chamber module) • Module price: EUR 200,000 • Sale only of complete module • Terms: EXW (38-120 Czudec, Poland) – Incoterms 2020 If you are interested, please contact us by email or WhatsApp.