Used Cws 500 for sale (16,102)

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 480 mm 610 x 450 saw band length 5320 x 34 x 1,1 mm band speed 15 - 100 m/min table height 820 mm total power requirement 3,0 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,65 x 2,8 x 2,2 m For miter cuts up to 45° left in fully automatic Operation and up to 60° left in semi-automatic operation Material height sensor (automatic cut start detection) Automatic feed unit via ball screw with incremental feed automatic length compensation Button on the saw band for automatic adjustment of the saw stroke Fully automatic control of the saw frame and clamping device Hydraulic unit with automatic pressure shut-off when idling Dksdpfxsfu Nbbj Ak Aow Mechanical chip clearing brush feed vice opening on both sides Remaining piece length 100 mm Modern CNC control freely programmable for multiple sawing jobs with various Cutting lengths and quantities. Automatic feed unit 500 mm via ball screw incremental feed with automatic length compensation. Adjustable for section lengths of 25 – 9,999mm. Fully hydraulic control of saw frames and clamping devices Preselection of 3 different material feed speeds Visualization of the entire workflow with simple data entry

Condition: new, pressure 500 t column daylight 600 mm stroke 600 mm table surface area 3500 x1500 mm 600 mm feed down 8 mm/sec feed up 16 mm/sec travel on the bed 2200 x 900 mm total power requirement 30 kW weight of the machine ca. 28 t 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates are precision-milled using a CNC milling machine - Chrome-plated cylinder - Worktop with threaded holes HYDRAULICS - Bosch Rexroth hydraulic pump - Hydrapack or Badestons hydraulic directional control valve - Hydraulic block in accordance with EN standards - 1000-liter hydraulic oil tank - Pressure adjustment via pressure transmitter/regulator ELECTRICS - Control cabinet in accordance with EN standards - All cables are labeled and clearly arranged - All electrical components are from Siemens Dkjdpfxsfv Awhs Ak Ajw CONTROL PANEL - Stroke control in any position - X, Y, and Z-axis movement via remote control - Stroke adjustment via sensor SAFETY - The machine complies with the EC safety standards 2006/42/EC Machinery Directive, EN ISO 16092-01 and 16092-03 - Two-hand operation - Emergency stop button - Safety rope with switch around the press 4. TRANSPORT AND INSTALLATION – The price includes transport costs, installation, and training at the customer's factory. – Hydraulic oil is not included in the price. – All handling costs (e.g., crane, forklift, etc.) are borne by the buyer. 5. WARRANTY – The machine has a 2-year manufacturer's warranty. – This warranty covers the delivery of all spare parts required for repair and service of the machine. Damaged parts will be returned to the manufacturer after replacement with a new part. – This warranty does not cover parts damaged due to improper use.

Year of construction: 1999, condition: used, Demag KBK 2 - crane sky crane runway Please ask your crane track according to your measurements. Payload / load lifting 80-125-250-500 up to 1000 Kg Technical data of the plant: Profile Demag KBK 2 rails Also available as monorail with elbows and points! Mounting height variable System can be supplied complete KBK rails, rail connectors, chassis, end plates, cable chain, holder / hanger etc. Optional all chain hoists are available Due to the low weight Taken assembly in lightweight construction / wooden buildings or older buildings is possible. Dksdpoct Dhaefx Ak Aew Very good used condition Rails available in yellow or red! Shipping preferred possible pickup by freight Demag KBK1, KBK2L, KBK2 and KBK3 rails are in stock! Contact Person: Mr. Goepferich info ÄT mobatgg . de

Year of construction: 1996, condition: excellent (used), Welding rotary table Hamacher 500 KK, load capacity Dodpfshadtusx Ak Aokw Speed continuously adjustable from 0.01 to approximately 2.0 RPM Height (horizontal) 800 mm, width 800 mm, length 1550 mm Diameter of the clamping disc 800 mm

Condition: new, Power 7,5 KW Receiver 500 L weight of the machine ca. 300 kg dimensions of the machine ca. 1,7x 0,6 x 1,45 m feed pressure 16 bar liter capacity 870 l The UWM 10/870/500 K50 + Startbox is equipped with a K50 pump. Dodpfxshid Erj Ak Aekw Note that this is a high-pressure version (especially for trucks or places where higher pressure is required), Industry and hard work. The starting box is used to obtain a lower starting voltage (around to reduce peak voltages. The UWM 10/870/500 is available with 400 V

Condition: used, mileage: 444,700 km, power: 375 kW (509.86 HP), first registration: 09/2020, fuel type: diesel, empty load weight: 14,650 kg, maximum load weight: 11,350 kg, overall weight: 26,000 kg, axle configuration: 6x4, next inspection (TÜV): 06/2027, fuel consumption (urban): 1,035 l/100km, color: green, driver cabin: sleeper cab, gearing type: automatic, suspension: air, number of seats: 2, total length: 10,350 mm, lifting height: 4,000 mm, Equipment: ABS, air conditioning, cruise control, differential lock, hydraulics, onboard computer, parking heater, trailer coupling, Color: green, unladen weight: 14,650 kg, permissible total weight: 26,000 kg, 1st axle: 385/65 R22.5, 2nd axle: 315/80 R22.5, 3rd axle: 315/80 R22.5, seats: velour, interior color: gray, air suspension, digital tachograph, automatic climate control, comfort driver’s seat, driver’s seat with air suspension, radio, power steering, adjustable steering column, alloy wheels, electric windows, outside temperature display, fog lights, electric exterior mirrors, curb mirrors, wide-angle mirrors, central locking, underrun protection, sun visor, cooler box, light bar with lights, hill start assist, LED daytime running lights, 1x15-pin connection socket, cup holder, rubber floor covering, insulated cab, information and service system, speed limiter, wide tires, trailer brake connection (pneumatic), lower bunk, sprung cab, Palfinger Epsilon M10L80 trailer: Janzen System DA RH18 short timber... UVH260396 225, non-binding offer, subject to errors and prior sale. Image may not match the offer. Due to the large number of inquiries, this advertisement only refers to the truck; the trailer is advertised separately and costs 18,000.00. Dkodpfx Ako Aarnbj Aow

Year of construction: 2025, operating hours: 80 h, condition: used, functionality: fully functional, laser power: 1,500 W, machine/vehicle number: ELKY-2504021, For sale is a professional, continuous laser cleaning machine (Continuous Wave) of the type GL-C-CWM-1500, manufactured by EraserLaser GmbH. The unit was manufactured in 2025, has very few operating hours, and is in excellent, fully functional condition. This system is ideally suited for the fast, thorough, and non-contact removal of rust, paint, oils, grease, and oxide layers from metallic surfaces. Thanks to its high power of 1500 watts and the particularly long hose package, the unit offers maximum flexibility in professional workshop or industrial environments. The exact, cumulative operating hours can be read transparently directly on the system display. Product advantages & highlights: High flexibility: The 15-meter-long fiber optic hose package enables comfortable working, even on large components, in hard-to-reach areas, or on scaffolding. Precise control: Parameters such as laser power, frequency, and beam width can be set precisely via the intuitive 7-inch touch display and saved as presets. Gentle surface treatment: The variably adjustable pulse rate allows the heat input to be regulated precisely – also ideal for more sensitive workpieces or thin sheets. Reliable cooling: An integrated Hanli water cooling system ensures stable temperature monitoring and enables trouble-free operation in continuous mode. Ergonomic cleaning gun: Equipped with a red preview laser for accurate alignment of the cleaning area and an automatic compressed air control to protect the optics from dirt particles. Technical data at a glance: Model: GL-C-CWM-1500 (mobile steel housing on heavy-duty rollers) Dodpfx Akoziwwij Aokw Laser type: CW fiber laser (Continuous Wave), laser class 4 Wavelength: 1070 nm Laser power: 1500 watts (continuously adjustable from 10% to 100%) Laser frequency: 1000 Hz – 9000 Hz Cleaning width: 1 mm to 150 mm (variably adjustable) Fiber length (hose package): 15 meters Power connection: 220V AC / 32A connection (protected with 25A) Condition & scope of delivery: Condition: Very well-maintained used condition, low operating hours, optically and technically flawless. Protective lenses and optics are clean and fully operational. Scope of delivery: Laser cleaning system GL-C-CWM-1500 including 15m hose package and cleaning gun. Important safety note: The operation of a system of laser class 4 requires the mandatory wearing of approved laser safety glasses (DIN EN 207 for 1070 nm) as well as compliance with applicable occupational safety regulations (including extraction).

Condition: used, mileage: 475,233 km, power: 375 kW (509.86 HP), first registration: 07/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 07/2027, color: violet, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH 500 4x2 | Automatic | Aluminum rims | Additional headlights Volvo FH 500 semi-trailer tractor unit with a high-roof cab and extensive visual equipment. Vehicle data: ? First registration: 07/06/2018 ? Mileage: 475,233 km ? Power: 375 kW / 510 hp ? Engine displacement: 12,777 cm³ Dodpfxoz Rrhwo Ak Aekw ? Fuel: Diesel ? Emission standard: Euro 6 ? Axle configuration: 4x2 ? Permissible total weight: 18,000 kg ? Color: Violet Equipment: ? Automated transmission ? High-roof cab with sleeper berth ? Leather seats ? Multifunction steering wheel ? Alcoa aluminum rims ? Additional headlights on the roof ? Front bull bar with additional headlights ? Air horns on the roof ? Sun visor ? Side chassis fairing ? Roof spoiler and side wind deflectors ? Storage space above the windshield Errors, changes, and prior sale are reserved. We are happy to provide further information.

Year of construction: 2005, condition: excellent (used), The subject of the auction is the sawmill line BRODPOL The line consists of a log prefeeder plus a cascade, an input feeder, a BRODPOL TT5/500/320/G circular sawmill with a centering device and a receiver, and a distribution table. - diameter of the processed log 100 - 320 mm - length of processed log 1250 mm - 6000 mm Dkjdpfel H Hy Hox Ak Asw - diameter of circular saws (only) 500 mm - maximum number of saws on the spindle 5 pcs. - feed speed 10 - 28 m/min. - power of main motors 55 kW + 75 kW Hcwgak9s - required connection of pneumatic supply 6 atm. - capacity up to 20 m³ per hour of operation

Condition: used, functionality: fully functional, roll diameter: 50 mm, roll width: 500 mm, roll pitch: 63 mm, total width: 1,935 mm, total height: 70 mm, total length: 1,935 mm, conveying length: 1,935 mm, construction width: 540 mm, construction height: 70 mm, TAF article number: 1000004163 Manufacturer: unknown Year of manufacture: unknown Overall dimensions: approx. 1,935 x 540 x 70 mm (LxWxH) Cheek width: 540 mm Cheek height: 60 mm Dodjucwuyjpfx Ak Askw Conveyor length: 1,935 mm Conveyor width: 500 mm Roller type: Plastic Rollers per axle: 1 piece Roller pitch: 62.5 mm Roller diameter: 50 mm Drive: Gravity Condition: Used / fully functional Function test: OK

Condition: new, 0 1170 x 580 x 580 mm operating pressure 2,2 - 8,0 bar dimensions 1,22 x 0,93 x 1,70 m air consumption at 6 bar 350 l/min weight of the machine ca. 0,15 t Dsdpfsupxd Djx Ak Aekw

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Description: Mitutoyo Dodpstxyv Ijfx Ak Aokw Manufacturer: Mitutoyo Type: CV-500 The Contracer is complete with PC, software, monitor and vice.

Condition: excellent (used), mileage: 638,291 km, first registration: 08/2014, fuel type: diesel, axle configuration: 6x4, wheelbase: 3,200 mm, fuel: diesel, fuel tank capacity: 600 l, brakes: engine braking, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, navigation system, power mirror, soot filter, spoiler, = Additional Options and Accessories = - Aluminum fuel tank - Brake booster - Roof spoiler - Low noise - Speed limiter - Air suspension - Air horn - Particulate filter - Sleeper cab - Sun visor - Stability control - Power take-off (PTO) = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,777 cc Unladen weight: 10,300 kg Transmission Transmission: I-SHIFT, automatic Axle configuration Front axle: Steered Rear axle 1: Twin tires Rear axle 2: Twin tires Dkjdpfeuxvpwox Ak Aow Condition Technical condition: very good Visual condition: very good Financial Information Price: On request VOLVO FH 500 6X4 Tractor Unit EURO 6 L PACKAGE 500 HP DRIVE: 6X4 PLANETARY AXLE AIR SUSPENSION WHEELBASE 320 CM FH GLOBETROTTER CABIN OPTIONS: - AIR CONDITIONING (CLIMA) - NAVIGATION SYSTEM - REFRIGERATOR - MICROWAVE I-SHIFT AUTOMATIC TRANSMISSION ALUMINUM FLOOR LED HYDRAULIC CONNECTIONS LARGE DIESEL TANK 600 LITERS FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: good (used), Well-maintained Falch Trail Jet 15 500 bar Dksdpfsuvd N Sjx Ak Asw 490 operating hours Year of manufacture 2021 Hot water Regularly serviced by Falch Various accessories available as options

Condition: new, Year of construction: 2026, I am selling this long-cut (shortening) saw. Suitable for cutting boards, prisms or large prisms. Cutting length: 600 / 900 / 1200 mm Dkedpfxex Ut Iqs Ak Ajw Cutting height: 100 / 150 / 200mm Motor power: 7.5 / 11 / 15kW Disc diameter: 500 / 600 mm Disc feed mechanical using an electric motor. Individual parameters can be customized. Tables according to specification.

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € Dm. 200x78x78 mm 2800 1/min 300 mm 300x150x55 mm 350x150 mm 500x160 mm 3.6 kW 1020 mm 820 mm 2170 mm 440 kg This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, Dksdpfx Akeyv Iqvs Aow which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden at [phone number]. Rädlinger swivel rotator for CAT M318 / CW 40 mount / Year of manufacture: 2016 Price: €12,890.00 net / €15,339.10 gross - Equipment class: 23 tons - Weight: 840 kg A rigid trench bucket for €1,490.00 net is also available as an optional accessory. Price only valid in conjunction with the purchase of the swivel rotator. We have many other attachments in our warehouse that are immediately available! Dsdsymi I Aspfx Ak Aekw Upon request, we will also provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! Internal number: 562046 = Further information = Year of manufacture: 2016 Intended use: Construction Please contact Marius Herden for further information.

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 7730 € 149.19 € 500 kg 150 mm 150 mm Dkedpfxoyq Stve Ak Ajw 360 kgm 230 / 50 V / Hz 0.37 kW 0.37 kW 0.1 - 3 U/min 45 s 800 mm M20X6 mm 640 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement

Condition: used, Year of construction: 1995, BIGLIA B 500 M LATHE MOTORIZED CENTERING DIAMETER: 210 mm Dksdey A Eanjpfx Ak Asw MAXIMUM MACHINABLE DIAMETER FROM BAR STOCK: 52 mm MAXIMUM MACHINABLE LENGTH: 500 mm TRAVELS: X: 220 mm Z: 500 mm Y (tailstock): 600 mm ACCESSORIES: No. 2 MOTORIZED, ADJUSTABLE BRAND: ALBERTI; No. 2 MOTORIZED, RADIAL; No. 3 MOTORIZED, AXIAL; VARIOUS MIXED FIXED TOOL HOLDERS CHIP CONVEYOR COMPLETE WITH DOCUMENTATION MACHINE IN PERFECT CONDITION YEAR 1995

Condition: good (used), Year of construction: 2001, The machine will be delivered including a new replacement spindle. Digma HSC 500, year of manufacture 2001, Dedpfxsy A H Tpo Ak Askw Heidenhain iTNC 530 control, travel X/Y/Z 500/400/350 mm, spindle speed up to 42,000 rpm, tool holder HSK 40, laser diameter measurement, oil mist lubrication system, extraction for graphite machining, 3D infrared measuring probe, The tool cannot be released from the spindle; according to the service technician, this is not a spindle problem but a hydraulic issue. A new HSC replacement spindle is included.

Condition: excellent (used), FANUC 21-M Control With NC dividing head Working travels 1020 x 510 x 575 mm Table size 1200 x 550 mm Spindle taper SK40 Djdpfxjy Hqyhe Ak Aekw Spindle speeds 60-8'000 rpm Tool changer 24 Pos. Coolant through spindle Misc. accessories MARCELS MASCHINEN CH

Condition: new, Year of construction: 2026, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 320 mm, feed length Z-axis: 420 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 420 mm, spindle speed (max.): 8,000 rpm, total height: 2,530 mm, total width: 1,950 mm, total length: 2,600 mm, table width: 260 mm, table length: 800 mm, type of input current: three-phase, overall weight: 2,600 kg, input voltage: 400 V, warranty duration: 12 months, Equipment: documentation/manual, CNC MACHINING CENTER 532 Metal Technics Polska MTP CNC 532 SPECIAL OFFER - 5% DISCOUNT Original price: €17,936 net EXW Discount: €896.80 SPECIAL PRICE: €17,039 NET EXW Year: 2026 Condition: New, fully functional Location: Sokołów Podlaski, Poland DESCRIPTION The MTP CNC 532 is a compact and precise vertical CNC machining center designed for milling, drilling and tapping of steel, aluminium, non-ferrous metals and engineering plastics. The machine features professional SIEMENS SINUMERIK 808 Advanced control, SIEMENS servo drives, precision linear guideways and ball screws. Its rigid construction provides excellent stability, accuracy and repeatability, making it suitable for CNC workshops, tool rooms, prototype production and small-to-medium series manufacturing. A fully enclosed working area protects the operator from chips and coolant, while the automatic lubrication system reduces maintenance requirements. TECHNICAL SPECIFICATIONS • Table: 800 x 260 mm • Spindle taper: BT30 (BT40 optional) • X/Y/Z travel: 500 / 320 / 420 mm • Spindle-to-table distance: 90-470 mm • Maximum spindle speed: 8000 rpm • Tool magazine: 10 positions • Rapid traverse X/Y/Z: 10 / 10 / 8 m/min Dodpfx Aoy Ht Axsk Askw • Working feed: 2.6-2500 mm/min • Servo torque X/Y/Z: 6 / 6 / 7.7 Nm • Positioning accuracy: +/- 0.02 mm • Repeatability: +/- 0.01 mm • Main motor: 3.7 kW • CNC control: SIEMENS SINUMERIK 808 Advanced • Servo drives: SIEMENS • Power supply: 400 V, three-phase • Dimensions: 2600 x 1950 x 2530 mm • Weight: 2600 kg STANDARD EQUIPMENT • SIEMENS SINUMERIK 808 Advanced CNC • SIEMENS servo drives • 8000 rpm spindle • 10-position automatic tool magazine • Fully enclosed working chamber • Precision linear guideways and ball screws • Automatic lubrication system • Pneumatic system • LED working-area lighting • 3-color status/alarm lamp • CE Declaration of Conformity • Technical and operating documentation APPLICATIONS Ideal for precision milling, drilling and tapping, prototype production, tool rooms, CNC workshops and serial manufacturing. TRANSPORT, WARRANTY & SERVICE Professional transport is available throughout Europe, with costs calculated individually according to destination. Free collection from our warehouse in Sokołów Podlaski is also available. The machine is supplied with a 12-month warranty, warranty service and spare-parts support. Post-warranty servicing and spare parts are also available. SPECIAL PRICE Original price: €17,936 net EXW 5% discount: -€896.80 SPECIAL PRICE: €17,039 NET EXW VAT applies where legally required. Metal Technics Polska Fabryczna 1, 08-300 Sokołów Podlaski, Poland Contact us for availability, transport quotation, additional photos, videos or an individual commercial offer.

Condition: excellent (used), Year of construction: 2009, Weeke BHX 500 – Operator Side Right Djdpfx Aksx S Hzlo Aekw Weeke Machining Center, each with one machining support above and below Infeed table with automatic workpiece feeding and positioning WORKPIECE DIMENSIONS Min. workpiece length: 200 mm Max. workpiece length: 2,500 mm Min. workpiece width: 70 mm Max. workpiece width: 1,000 mm Min. workpiece thickness: 8 mm (2*4 mm) Max. workpiece thickness: 80 mm Max. workpiece stacking: 2 pieces Machine configuration: 2V21 HIGH SPEED 7500 Vertical drilling unit arranged in both upper and lower machining supports, each with 21 drilling spindles (individually controllable with variable speed range). 2H4X/1Y Horizontal drilling unit arranged in both upper and lower machining supports, each with 10 spindles individually selectable via program. Each with 8 drilling spindles: in X-direction Each with 2 drilling spindles: in Y-direction N2 X-Y 90° Grooving saw unit arranged in both upper and lower machining supports for machining operations in the X-Y direction, swiveling 90°. Cutting depth: 30 mm ADDITIONAL NOTE ON GROOVING SAW BLADE The saw blade width can be 8.4 mm. The cutting cross-section must not exceed 70 mm². F2-ETP-6 KW Milling unit arranged in both upper and lower machining supports, suitable for receiving shank tools. Manual tool change. Tool clamping: manual, Hydro quick-clamping system ETP 25 Rotation direction: right/left Speed: 6,000 – 18,000 rpm, stepless programmable Machining up to 3,000 mm Infeed table with automatic workpiece feeding and positioning Workpiece discharge area with cross belt conveyor and lifting arms – Workpiece length measurement in the machine – Movable operator terminal – Barcode software incl. scanner

Condition: new, Year of construction: 2024, Safety glass window for a Gildemeister CTX Beta 500 V4, item in original packaging, unused and new. Dodpfxoyx U Slo Ak Aekw

Condition: excellent (used), Year of construction: 2014, I sell the 2-spindle horizontal multirip saw of polish production Walter OP-500. Year 2014. Djdpswini Eofx Ak Ajkw Suitable for cutting round wooden logs with 2 Spindles. Cutting width 120 - 350mm. Motors 23,8 + 23,8 KW. Total power 54,2 KW. Diameter of main saw blade max. 500mm. Feed speed controlled by variator up to 20m/min. Blades and adjusting rings included. The machine is in stock in Kežmarok, Slovakia. Available immediately.