Hydraulic pipe bender with hand pump DAKO GEDORE (WAX) type BN2Masch. No: 19170 Year of construction approx. 1995Printing capacity approx. 12 ton.Cylinder stroke 200 mmPiston rod diameter 50 mmTool holding pin 30 mmHand lever hydraulic pump- 4 bending tools (1x 1/2" Ø22 mm; 1x 1" Ø 33 mm; 1x 1 1/2" Ø 48 mm; 1x 2" Ø 62 mm)- 2 counter bearings with round and triangular prism- 4 counter bearings with round prismSpace requirement L x W x H: 850 x 620 x 750 mmWeight 80 kgguter Condition
gas and water pipes up to 2"
metric pipes 14 to 51 mm
guardrail tubes from 3/8 to 1.1/4"
electrical installation pipes M 12 to M 40
usable for bending angles up to 180°
open bending frame
pressing force 10 to
space requirements width - 810 - depth - 700 x height - 850
weight approx. 170 kg more
range L-W-H 785 x 475 x 985 mm
weight 102,5 kg
weight max. in kg 900 kg
Professional workbench / tool trolley
Dimensions of the right 3 upper drawers 41.5 x 39 x 8 cm.
Dimensions of the right 4th drawer 41.5 x 39 x 15 cm.
Dimensions of the right 5th drawer 41.5 x 39 x 23 cm.
Dimensions of the middle 3 upper drawers 83.5 x 39 x 8 cm.
Dimensions of the middle 4th drawer 83.5 x 39 x 15 cm.
Dimensions of the middle 5th drawer 83.5 x 39 x 23 cm.
Dimensions of the left 3 upper drawers... more
Listing Dako Slide Hybridizer
This listing is for 1 of 2 Dako Slide Hybridizer Hybridizer is a hands-free denaturation and hybridization instrument designed for slide-based fluorescence and chromogenic in situ hybridization (FISH and CISH, respectively) on histology and cytology samples. The instrument allows for semi-automation of ISH by eliminating steps in the time-intensive manual procedure and can be integrated in laboratories working with the Dako Aut... more
Electric - hydraulic pipe bending machine top condition
Fabr .: Probably DAKO
Motor power: AEG 1.5 KW 1400 rpm 50 Hz 380 volts
Piston diameter: approx. 66 mm _ working pin diam. 35 mm
Cylinder diameter approx. 110 mm, Cylinder-piston - with new sealing rings
Control by since. Handwheel (hydraulic control) / electric motor via switch
electr-hydr. Cylinder unit, base frame + bending frame - hinged
Tools: 7 segments with a bore of approx. 35.5 mm
DAKO steel bending molds:
Pg16- R160... more
This listing is for 1 of 2 complete Agilent Dako Artisan Link Pro slide stainerIncludes- Artisan link- PC with monitor, mouse and keyboard- Zebra printerArtisan Link Special Staining System is Agilent's first instrument to provide true walk-away automation for complex special stains. A slide barcode reader standardizes and increases the speed of slide processing, reduces errors and improves your laboratory productivity. The software allows Artisan Link to be operated eith... more
External dimensions of the machine approx: 275 x 160 x 200 cm
Weight: 2000 kg
Maximum width of the piece: 30 cm
Maximum height of the piece: 30 cm
Minimum length of the piece: 80 cm
Number of brushes: 8 (2 x side)
Brush rotation speed with inverter: 500-1500 r/min
Diameter of the brushes: 250 mm
Brush motor power: 1,25 (each brush)
Electronically adjustable feed
Feeding speed: 5 - 15 mt/min more
The machine was bought as new at Doosan in mid-2015.
Mounted 4th axis Tsudakoma RNE-250 rotary table adapted to the Lang, Schunk quick clamping system, there are 3 vices on the table shelf.
The machine after service, replacement of bearings on the spindle, runout on the spindle 0.002 !!! The whole machine geometry is set in 0.005 - 0.008 !!!
Fanuc 32iB, 2MB NC Memory, Tool Offset typ C - 60 position
Manual Guide, 10,4" screen
High speed spindle 15 000 obr/min , 170 Nm, 22kW mocy
Thru spindle co... more
x-travel 630 mm
y-travel 550 mm
z-travel 550 mm
control Professional L Makino
turning speed range - main spindle 50 - 16.000 min/-1
power capacity - main spindel 15 / 11 kW
max. Torque 29 Nm
tool taper HSK-A63
table diameter 400 mm
max. table load 400 kg
max. workpiecediameter 710 mm
max. workpiece height 580 mm
number of toolpositions 30 pos.
tool taper HSK-A63
max. tool diameter 100 / (125) mm
max. tool length 310 mm
max. tool ... more
Hyundai-Kia vertical machining center type VX-400 with Fanuc 21i-MB control + Manual Guide i. X-, Y- Z- axis travels are 800 x 460 x 520 mm table size 1000 x 460 mm. Direct drive spindle with 12.000 rpm. The machine is equipped with a Tsudakoma full 4e axis. Cooling through the spindle with 20 bar pressure! Tool magazine with 30 positions. Next to the machine there is a BMO loading robot that loads the machine automatically! Available at short notice (subject to intermediate sale)
Model Series 180i-B
CNC main language Spain
CNC language customizable Yes
Number of spindles 1
Spindle speed range 12000
X-Axis Movement 640 mm
Y-Axis Movement 600 mm
Z-Axis Movement 500 mm
Workpiece weight 600 kg
Outer length 850 mm
Outer width 630 mm
Tslots size 5
Slots in storage 30
Max weight 7 kg
Max tool diameter 140 mm
Max tool length 300 mm
Type of tool holder BT40
Internal cooling with ... more
MATSUURA MC 800VF 5 AXIS VERTICAL MACHINING CENTRE
CONTROL YASNAC CNC CONTROL
TABLE SIZE 1100.0 mm x 409.9 mm
TRAVERSES (XYZ) 800.1 mm x 439.9 mm x 484.8 mm
SPINDLE SPEED 0 – 8,000 RPM
SPINDLE TAPER BT 40
ATC 30 STATIONS
TSUDAKOMA 4TH AND 5TH AXIS UNIT
SWARF CONVEYOR more
OKK CNC machining center offered.
Type: MCH 800 II
Control unit: Fanuc 16-M
Y-travel: 1020 mm
Z-travel: 920 mm
Bed: 805 x 805 mm
Workpiece weight max: 2000 kg
Toolchanger: 80 pieces
Spindle: ISO 70
Power: 55 KVA
5th Axle: Tsudakoma RNCM 501
Included documentation, software and parameters
Movie available !
For more information call us or send an e-mail. more
- Table dimensions : 700 x 400 mm
- Weight allowed on the table : 200 kg
- Spindle speed : 12 000 rpm
- Spindle power : 3.7 / 5.5 kW
- Spindle taper : BT30
- Axis travel : X = 560 - Y = 430 - Z = 350 mm
- Fast feeds : X - Y- Z = 48 000 mm/min
- Tool changer : 20 tools
- Tool-to-tool change time : 0.7 seconds
- Max tools diameter : 60 mm
- Maximum tool length : 200 mm
- Maximum tool weight : 3 Kg
- Machine dimensions : 1600 x 2042 x H241... more
The Machineseeker trust seal gives buyers the ability to detect whether they have to do it with a trusted seller at a glance .
What do we check?
Check of the trade licence or commercial register extract.
Check the address of the dealer.
Validation of Bank connection .
Verification of the telephone accessibility the main phone number.
Credit report must not contains negative criteria.
Buyer complaints can lead to the withdrawal of the seal.
What does this mean for buyers?
Buyers can restrict the circle of potential business partners without extensive checks and favor companies that make honest and righteous shops with high probability.
Of course, disagreements can still arise during the purchasing process. Maschinensucher resp. the Machineseeker Group GmbH is not liable for legal infringements of the buyer resp. seller active on Maschinesucher resp. Machineseeker.
There is no right to the grant of the Machineseeker trust seal. In addition, the seal can be removed.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH does not accept any liability for the content of linked websites.