Used Deckel Fp 42 for sale (709)

Condition: good (used), x-travel 300 mm Bedpfx Ageucphxslecu y-travel 340 mm z-travel 250 mm total power requirement 1,5 kW weight of the machine ca. 0,8 t Heidenh. 3 axes aktiv digital display Year of construction unknown

Condition: used, tool adaptor 88 Bcedpfx Agjv Dxzcsleu length 560 mm center height of top slides 65 mm weight 17 kg Counter holder / horizontal milling device for tool milling machine Deckel Mod. FP 1 consisting of upper beam and mounting of the milling arbor. The distance from the middle of the milling arbor to the lower edge of the counter holder is 65 mm, the width of the guide is 88 mm. Machine dealer with own stock of 1600 m².

Condition: used, Universal tool milling machine DECKEL type FP 1 Machine no.: 52185 Year of manufacture: 1968 Travel X: 300 mm Y: 150 mm Z: 340 mm Table size: 600 x 250 mm Spindle taper: SK 40 - S20 x 2 Bjdpfxsdzqb Ss Agljcu Spindle speed: 40-2000 rpm, 16 steps Motor power: 1.0 and 1.4 kW, pole-switchable Mains connection: 380 Volt, 50 Hz - Feed on X and Z axes - Two motor speeds and 8 gearbox speeds - Quill stroke on vertical milling head: 60 mm - Fixed angle table - Coolant system in the machine base - Free-standing control cabinet - Counter support with counter bearing for horizontal milling SK 40 Required space (L x W x H): 1200 x 1100 x 1600 mm Weight: approx. 1000 kg Very good condition

Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine No. 28317 Year of construction approx. 1960 travel X: 245 mm Y: 150 mm Z: 340 mm table size 600 x 210 mm spindle admission horizontal MK 4 - S20 x 2 spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm. 12 steps motor power 0,8 and 1,1 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gear steps - feed in X- and Z-axis - Coolant device with mechanical pump in machine base - Pinol shift at vertical milling head 60 mm Bcodpfxoiy Ekvo Agleu - vertical milling head +/- 90° tiltable - Metal base made of angle iron with machine feet space requirement L x W x H 1100 x 900 x 1650 mm weight 650 kg good condition

Condition: used, Universal tool milling machine DECKEL type FP 1 Machine No. 33064 Year of manufacture approx. 1960, overhauled in 2012 Travel X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: MK 4 - S20 x 2 Vertical spindle speed: 95–1900 rpm, 12 steps Horizontal spindle speed: 60–1200 rpm, 12 steps Motor power: 1.1 and 1.4 kW Power supply: 380 Volt, 50 Hz Bsdpodzp T Ejfx Aglscu - Feed on X and Y axes - Quill adjustment on the vertical milling head - Fixed angle table - Coolant system with mechanical pump in the machine base - Separate control cabinet with cable connector Space requirement L x W x H: 1100 x 900 x 1600 mm Weight: approx. 900 kg Good condition Machine was overhauled in 2012

Year of construction: 1968, condition: used, Cover milling machine FP1 with 3 axis digital display 380V Machine no. 37729 120-1900 rpm Travel X-axis:300 mm Travel Y-axis:150 mm Z-axis travel:340 mm Tool holder: MK 4 with tightening thread S 20 x 2 Milling head type:Vertical milling head Table type:Fixed table Table clamping surface:600 x 210 mm T-slot size:12 mm X-axis feed:290 mm Bodpfx Aspmrpxjglocu Y-axis feed:150 mm Z-axis feed:330 mm Weight:700 kg Cover milling machine FP1 ID: M100000409

Year of construction: 1981, condition: used, Make cover Type FP 4 Table: dimensions 1000 x 470 mm longitudinal movement X - axis 700 mm transversal movement Y - axis 400 mm vertical movement Z - axis 450 mm projection spindle 50 450 mm spindle mounting ISO 40 Number of spindle speeds 18 Bcedjihp U Dspfx Aglsu Spindle speed range 31,5 1600 rpm Number of revolutions horizontal spindle 18 pcs. Speed range horizontal spindle 31,5 1600 rpm Weight machine 2000 kg feeds X Y Z axis 18 pcs 10 500 mm/min Accessories milling head with quill Table 1000 x 470 mm

Condition: used, Year of construction: 1985, x-travel 485 mm Bsdpfx Agstqqllelscu y-travel 385 mm z-travel 380 mm table surface area 800 x 460 mm spindle taper SK 40 control CONTOUR 1 spindle turning speed range 50 - 2500 U/min feeds 10 - 1000 mm/min rapid traverse 2 m/min table load capacity 600 kg quill stroke 80 mm total power requirement 7,5 kW weight of the machine ca. 2,0 t dimensions 2,4 x 1,7 x 1,98 m Acc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant - movement of X/Y/Z also possible via handwheels -

Condition: used, Year of construction: 1976, x-travel 350 mm y-travel 150 mm z-travel 340 mm table surface area 600 x 210 mm spindle taper SK 40 spindle turning speed range 40 - 2000 U/min feeds 5 - 500 mm/min rapid traverse 1,2 m/min Bjdswwwr Espfx Aglscu total power requirement 1,9 kW weight of the machine ca. 0,7 t - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, various tool fixtures, various collets, original DECKEL tool cabinet

Condition: used, Year of construction: 1978, x-travel 300 mm y-travel 160 mm z-travel 340 mm table surface area 600 x 210 mm spindle taper SK 40 spindle turning speed range 40 - 2000 U/min feeds 5 - 500 mm/min rapid traverse 1,2 m/min total power requirement 1,9 kW weight of the machine ca. 0,7 t - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, Bedpfxowl N R No Aglocu DRO on 3 axis HEIDENHAIN, counter bearing, various tool fixtures, various collets, original DECKEL tool cabinet

Condition: used, Year of construction: 1985, x-travel 710 mm y-travel 600 mm z-travel 500 mm NC-rotary table 630 mm spindle taper SK 40 spindle turning speed range 18 - 6300 U/min control DIALOG 4 feed 2 - 3600 mm/min rapid traverse 6 m/min table load max. 485 kg quill stroke 80 mm spindle drive 9,5 kW Bcodpfx Agotqqtbjlou total power requirement 20 kVA weight of the machine ca. 4,6 t dimensions 3,8 x 2,24 x 2,35 m Accessories: vertical head with hydr. tool clamping and quill retraction, electron. handwheel, coolant

Condition: like new (used), x-travel:300 mm y-travel:220 mm z-travel:400 mm surface area:620 x 390 mm Bcedpfoh Ty Hkjx Aglou turning speeds:31 - 3150 U/min feed range:1 - 3600 mm/min rapid traverse:4000 m/min

Condition: not inspected (used), Please see technical details on photo. Bcsdjhvzxzspfx Aglsu

Year of construction: 1982, condition: refurbished (used), Universal tool milling machine Make: DECKEL Model: FP 3 Active year of construction: 1982 - overhauled, new painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey-blue machine no.: 2201-5539 with warranty Bsdpfxjpn Rgve Aglecu geometric acceptance with test report accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Universal table 650 x 370 mm (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread M 16 - Central lubrication, manually operated - coolant device - Operating instructions used as seen The machine corresponds technically the state of the art of the year of construction.

Condition: used, Year of construction: 1989, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1989 - workshop tested Machine no.: 2102-5561 Milling head type: 2171 Milling head number: 4393 geometric acceptance with test report Accessories: - 3-axis active digital readout Bjdpfx Agor En Dyslscu HEIDENHAIN TNC 113 with active function in X-, Y- and Z-axis - Fixed table 600 x 210 (T-slot: 12 mm) - SK 40 vertical milling head with tightening thread S 20 x 2 - Coolant device - Central lubrication, electric - Operating instructions used as seen, without guarantee The machine corresponds technically the state of the year of construction at that time.

Condition: used, Year of construction: 1980, x-travel 300 mm y-travel 160 mm z-travel 340 mm tool taper SK40 Speed 40-2000 U/min. control Aktiv HEIDENHAIN table-size 600 x 210 mm Bodpfx Agsw A Apysljcu total power requirement 2 kW weight of the machine ca. 0,73 t dimensions of the machine ca. TBH 1200x1100x1600 m - Active feed in the X and Z axes - Additional swiveling table 600 x 210 mm - Coolant system - Counter bearing for horizontal milling - Several fixtures and clamping devices/milling cutters - Operating instructions

Condition: used, Year of construction: 1980, x-travel 300 mm y-travel 160 mm z-travel 340 mm tool taper SK40 Speed 40-2000 U/min. control Aktiv HEIDENHAIN table-size 600 x 210 mm total power requirement 2 kW Bcsdsw A Ap Hopfx Aglsu weight of the machine ca. 0,73 t dimensions of the machine ca. TBH 1200x1100x1600 m - Active feed in the X and Z axes - Additional swiveling table 600 x 210 mm - Coolant system - Counter bearing for horizontal milling - Several fixtures and clamping devices/milling cutters - Operating instructions

Condition: used, x-travel 390 mm y-travel 200 mm z-travel 390 mm table-size 775 x 330 mm spindle taper ISO Sk 40 spindle turning speed range 40 - 2000 U/min quill stroke 40 mm total power requirement 2,2 kW weight of the machine ca. 1,4 t dimensions 1,75 x 1,5 x 1,8 m Universal Milling Machine - Digital Display - Chip Guard - Coolant System - Machine Light - Chip Tray Bodpfx Agjxfb Hgslocu - Machine Feet - Operating Instructions

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 2102-2641, Deckel FP1 Actif toolroom milling machine in very good condition. Machine Nr.2102-2641. Year of contruction 1985 Specifications: - Machine speed: 40 - 2000 rpm - Power feed X/Y/Z infinitely variable - Rapid feed X/Y/Z - X / Y / Z: 300/160/340 mm - Spindle brake - Spindle nose vertical and hor. SK40/S20x2 - Weight about 800 Kg Accessories and equipment: Bjdpfx Asf E Ilzsglscu - 3-axis actif digital readout Heidenhain TNC113 - coolant system - machine books Offered universal milling machine Deckel FP1 aktif, is in very good condition. The machine has very little crank game and all the spindles move easily. Even at maximum speeds, the milling machine runs quietly. All guideways are in very good condition. This machine has also rapid traverse in three axes. Machine is mechanical and electrical complete checked and tested and a oil change was performed. Take the opportunity to visit us to see this machine on site and try to stream.

Condition: used, Year of construction: 1986, functionality: fully functional, x-travel 710 mm y-travel 600 mm z-travel 500 mm NC rotary table 630 mm Spindle taper SK 40 Spindle speeds 18 - 6300 rpm DIALOG 4 control Feed rate 2 - 3600 mm/min Rapid traverse 6 m/min Max. table load 485 kg Swivel stroke 80 mm Spindle motor 9.5 kW Total required power 20 kVA Bcjdpswu Dfmefx Aglou Machine weight approx. 4.6 t Dimensions L x W x H 3.8 x 2.24 x 2.35 m Accessories: LNS Fox ws 2-1500 filter unit with 2 new filters in box, 2 cabinets full of tools This machine is stored at our facility.

Condition: good (used), Friedrich Deckel FP 2 LB Toolroom Milling Machine The accessories are not included in the scope of delivery but can be purchased separately. The Deckel FP 2 LB universal milling machine is characterized by its extremely stable base frame and is designed as a traveling column machine. This means that the machine maintains its precision even when machining heavy workpieces weighing up to 1000 kg. Another feature is the 45-degree inclined bed. After removing the universal table, this design allows for the direct clamping and machining of V-engine blocks with a 90-degree cylinder angle, such as those found in American V8 engines. The long travel of 800 mm is also advantageous in this application. Technical Specifications: Deckel Universal Milling Machine FP 2 LB Bsdpfxsgyw S Te Aglscu Digital Display: 3-Axis Digital Display Heidenhain X-Axis Travel: 800 mm Y-Axis Travel: 300 mm Z-Axis Travel: 400 mm Tool Holder: SK 40, Drawbar Thread S 20 x 2 Milling Head Type: Vertical Milling Head Speed Range: 40 - 2000 rpm Number of Steps: 18 Table Type: Universal Swivel/Tilt Table (± 45° / ± 15°) Table Clamping Area: 1000 x 520 mm T-Slot Size: 16 mm Vise 160 mm Power Consumption: 9.5 kVA Weight: Approx. 1900 kg Dimensions: Approx. 1570 x 1675 x 1850 Other Items - New and Used - can be found in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, table length: 790 mm, table width: 460 mm, Table size 790 x 460 mm Longitudinal travel 500 mm Bsdpfxswffymo Aglscu Transverse travel 400 mm Vertical travel 400 mm Spindle travel 90 mm Spindle taper ISO 40 Spindle speeds 50 - 2,500 rpm

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, feed length X-axis: 485 mm, feed length Y-axis: 385 mm, feed length Z-axis: 380 mm, spindle speed (max.): 3,150 rpm, Table size 795 x 460 mm Longitudinal travel 485 mm Transverse travel 385 mm Vertical travel 380 mm Bcedpfx Aswffzkjgleu Spindle travel 80 mm Spindle speed 0 - 3,150 rpm Spindle taper horizontal ISO 40 Spindle taper vertical ISO 40 Control CONTOUR 2

Condition: ready for operation (used), Cover FP 1 Milling machine Bcsdjuvih Hepfx Agleu Traverse path X-axis: 300mm Y-axis travel: 160mm Z-axis travel: 340mm Mounting: SK 40 with tightening thread Feed X-axis: 290mm Weight: approx. 940 kg (with pallet) Space requirement: 1300mm x 1200mm x 1800mm ( L x W x H ) Dimensions with pallet: 1400mm x 1400mm x 2000mm ( L x W x H ) You are welcome to come by for a viewing. We are happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Year of construction: 1990, condition: ready for operation (used), Travel X/Y/Z: 800mm/600mm/550mm, table diameter: 630mm, max. table load: 300kg, swivel range B: -15°/45°, turning range C: 360°, spindle speed: 6300rpm, power: 12kW, tool positions: 40, tool holder: SK40, feed: 10m/min, rapid traverse: 6m/min. Machine dimensions X/Y: approx. 3200mm/3000mm, weight: approx. 5750kg, control: Grundig Dialog 11, including chip conveyor and cooling lubricant system Knoll PF 50, year of manufacture: 1989. On-site inspection is possible. Bodpfx Aewtg Ibjglecu