Used Deckel Fp 5 Nc for sale (695)

Condition: excellent (used), Deckel FP 4 M in very good condition Original paint, guideways and smooth running in excellent condition 3-axis Heidenhain digital readout Travel: X 500 Y 400 Z 400 Speeds: 50 - 2500 rpm Feeds: 8 - 630 + rapid traverse on all axes Crjdpfewzlxusx Ah Usi Table: 460 x 800 mm Quill: SK 40 with M16 Weight approx. 1,500 kg Accessories: 15 SK 40 tool holders, machine vice with swivel base clamping range 150 x 300, coolant system, chip tray, spindle brake, machine feet, central lubrication, complete documentation. Of course, can be inspected under power. Free loaded ex location D - 88433 Schemmerhofen

Condition: good (used), Year of construction: 1966, Universal milling machine cover FP2 -WKG 512- On offer here is a universal milling machine from the manufacturer Deckel, type FP2. Technical data Manufacturer: Deckel Model: FP 2 Year of manufacture: 1966 Clamping surface: 730 x 240 mm Codjurk Exepfx Ah Usri Hydr. vice jaw width: 125 mm Clamping range: up to 225 mm Collet set: 0.5 mm - 17.5 mm

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 120, TECHNICAL DETAILS CNC control: HEIDENHAIN TNC 426/430 X-axis: 800 mm Y-axis: 700 mm Z-axis: 600 mm Spindle speed range: 20 - 18,000 rpm Spindle drive: 12 / 16 kW Torque: 87 / 130 Nm Work table NC swivel milling head: With B-axis (0.001°) Pallet clamping area: 800 x 630 mm Max. table load: 800 kg Holding torque on the table top: 3,500 Nm Rapid table traverse (round): 13.6 rpm Table feed (round): 3,600°/min Torque: 2,089 Nm Pallet storage: 5-station Tool magazine Tool holder: SK40 Number of tool positions in the magazine: 120 Max. tool length: 315 mm Tool diameter: 80 / 160 mm Tool weight: 10 kg Feed and rapid traverse Codjv N Hmwopfx Ah Usri Rapid traverse X-Y-Z: 30 m/min Feed range X-Y-Z: 20 - 10,000 mm/min Input resolution: 0.001 mm EQUIPMENT - Electronic hand control panel: included - Measuring probe: included - Tool breakage detection: included - Flushing gun: included - Internal coolant supply: 40 bar - Coolant tank: 900 l - Chip conveyor: included

Condition: reconditioned (used), Year of construction: 2008, Partially overhauled milling machine Axes: 5 Control: Siemens 840 Solutionline Spindle: SK 40 / 18,000 rpm Crjdpsv Acgyefx Ah Uji Equipment: 3D Quick Set for kinematic measurement, Heidenhain 3D measuring probe Handwheel Internal cooling system 40 bar Chip tray (no chip conveyor)

Condition: used, Year of construction: 1985, machine/vehicle number: 2204 - 0469, x-travel:580 mm y-travel:400 mm Cedpfxecxxwao Ah Ueri z-travel:450 (390*) mm table-size:460 x 800 mm spindle speeds:40 - 4000 U/min feed range:2 - 3600 mm/min feed:4.0 m/min spindle taper:SK 40 dimensions of the machine ca.:3,0 x 2,10 x 2,10 m spindle motor:4,0 kW control:Contour 2 The Deckel FP4 A Universal Milling Machine - CNC - Spilndle Head can be swiveled 90 ° (Right or left) - Angular Fixed Work Table: 800 x 460 mm - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872 - Portable Handheld operating unit for easy control of machine - 4.0 kw Motor for Main Spindle. - Central Lubrication and Coolant system, Seperate Power cabin - Chip tray with Splash protection offering More clean and safe working envoirnment.

Condition: used, Year of construction: 2004, functionality: fully functional, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 50,000 m/min, rapid traverse Y-axis: 50,000 m/min, rapid traverse Z-axis: 50,000 m/min, controller manufacturer: HEIDENHAIN, controller model: iTNC-530, number of slots in tool magazine: 60, tool length: 315 mm, tool diameter: 160 mm, Equipment: chip conveyor, Deckel Maho DMC-60T – 5-Axis Vertical Machining Center The Deckel Maho DMC-60T is a high-precision 5-axis vertical machining center, year of manufacture 2004, equipped with Heidenhain iTNC-530 CNC control. The machine is ideal for complex and high-speed machining thanks to its ISO 40 taper spindle, maximum speed of 18,000 rpm, and motor power of 19/28 kW (continuous/30 min). Main features: Axis travels: X = 780 mm, Y = 560 mm, Z = 560 mm Rotary axes: A = ±150° (head), B = 360° (table), continuous rotation with minimum resolution of 0.001° Table: 630 x 500 mm, maximum load 500 kg Rapid traverse: up to 50,000 mm/min Tool magazine: 60 stations, SK40 DIN-69871 tools, max Ø 80/160 mm, max length 315 mm, max weight 8 kg Crodpfx Ahswt N Tye Usi Additional equipment: Workpiece probing system, chip conveyor, coolant tank with pumps, high-pressure pump through spindle, spindle chiller, transformer, manuals, and CE documentation. Machine dimensions and weight: L 5,100 mm × W 5,000 mm × H 2,500 mm – Weight: 11,000 kg

Condition: good (used), Year of construction: 2000, Hello I have for sale a 5 axis CNC milling center DECKEL MAHO DMU 50 V evolution. The machine is connected and working. Crsdpfx Ajtt Ntfoh Uji _ Type: 5 axis milling center Manufacturer: DMG DECKEL MAHO Model: DMU 50 V evolution Control: HEIDENHAIN TNC430 Country of manufacture: Germany Year of manufacture: 2000 _ Machine parameters: - number of axes: 5 - working table dimensions (length x width): 500 x 380 mm - maximum spindle speed: 18,000 rpm - spindle power: 15 kW - X/Y/Z axis travel: 500/420/380 mm - C/B axis travel: 180/360 degrees - maximum feed rate: 20 m/min - total power: 40 kVa - machine dimensions (L x W x H): 2800 x 2300 x 2600 mm - total weight: 6000 kg

Condition: used, Year of construction: 1986, machine/vehicle number: 2204-0929, x-travel:560 mm y-travel:500 mm z-travel:450 / 390 mm quill stroke:80 mm feed:2 - 3600 mm/min table surface area:800 x 460 mm spindle turning speed range:40 - 4000 U/min spindle taper ISO:ST40 spindle head swivable left - right:+/- 90 ° control:Contour 2 total power requirement:4,0 kW weight of the machine ca.:2,8 t dimensions of the machine ca.:2,0 x 2,5 x 2,2 m The Deckel FP4 A Universal Milling Machine - CNC Crsdjcxxriepfx Ah Uei - Spilndle Head can be swiveled 90 ° (Right or left) - Angular Fixed Work Table: 800 x 460 mm - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872 - Portable Handheld operating unit for easy control of machine - 4.0 kw Motor for Main Spindle. - Central Lubrication and Coolant system, Seperate Power cabin, Chip tray

Condition: used, machine/vehicle number: 2819-0517, x-travel:300 mm y-travel:300 mm z-travel:400 (340 with Apron) mm surface area:390 x 620 / Chip tray mm turning speeds:40- 2500 U/min feed range:02 - 3600 mm/min rapid feed:4,0 m/min control:Contour 3 - 3D path Control System spindle taper:SK40 quill stroke:60 mm milling-head swivable +/-:90* spindle drive motor:2,0 kW total power requirement:1,6 / 2,0 kW weight of the machine ca.:1,3 t dimensions of the machine ca.:1,8 x 1,8 x 1,8 m Deckel FP2A Universal Milling Machine - Spilndle Head can be swiveled 90 °, can be used as vertical and horizontal machining Center. - Rigid Angle Table: 620 x 390 mm (Max. Load 250 kg) - Extendible sleeves: vertically 80 mm, horizontally 60 mm - Hydralic clamping system SK40 with Pull studs DIN 2080 or DIN 69872 Seperate Power Cabin, Central Lubrication and Coolant System, Chip tray and Splash Gaurd Cjdecxxp Tjpfx Ah Ueri

Condition: used, machine/vehicle number: 0736, x-travel:800 mm y-travel:300 mm z-travel:400 mm work table::1000 X 440 spindle turning speed range:40 - 2000 RPM/min turning speeds steps:18 feed range:10-500 mm/min feed steps:18 rapid traverse:1,50 m/min inner taper of milling spindel:SK40 total power requirement:2,2 kW weight of the machine ca.:2 t dimensions of the machine ca.:1,57 x 1,68 x 1,85 m Deckel FP2 LB Universal Milling Machine Cedecxxyhepfx Ah Uori - Spilndle Head can be swiveled left or right (90°) - Rigid Angular Table: 1000 x 440 mm - Quick lever for Rapid Feed Travese Seperate Power cabin and has a Chip tray for clean safe working Area.

Condition: like new (used), Year of construction: 2011, functionality: fully functional, Universal Milling Machine Deckel FP1 repowered by FPS in year of manufacture 2010 with 3-axis digital display Heidenhain ND 780. Like new!! Technical Data: >> Machine no. 2101-51084 Year of manufacture 2011 >> Fixed angle table >> Speed: 40 - 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 KW >> Travel range X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill - SK40 >> Clamping system S20x2 Cjdpfxswpi Dqj Ah Uori >> Weight approx. 700 kg Accessories and equipment: >> 3-axis digital display Heidenhain ND 780 >> Hydraulic vise >> Collets >> Tool holders >> Milling cutters >> Operating manual >> Coolant device About the machine: A universal milling machine Deckel FP1 repowered by FPS is being offered in like-new condition. The accessories include a hydraulic vise with rotary table, collet tool holder, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. Take the opportunity to inspect and try out the Deckel on-site under power. The machine is immediately available.

Condition: good (used), Year of construction: 1986, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 380 mm, Equipment: documentation/manual, Unfortunately, I have to sell it due to lack of space. It comes from a training workshop and has been very well maintained. I also simply don’t have the time to use it. The machine is ready for testing at any time. Accessories such as 3D probe holders, milling cutters, etc. are also available. Codjxudw Hepfx Ah Ueri

Condition: repair required (used), Year of construction: 1995, operating hours: 18,000 h, functionality: limited functionality, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, Equipment: chip conveyor, For sale is a DECKEL MAHO DMU 80 T, a robust and precise 3-axis machining center with a large clamping area. The machine is still connected to power and operational—a test run can be arranged upon request. However, an overhaul of the axes is necessary. On-site loading can be organized. Technical Data: Travel (X/Y/Z): 880 / 630 / 630 mm Clamping surface: 1250 x 700 mm Table load: 600 / 500 kg Spindle taper: SK 40 (DIN 69871) Speed range: stepless 20 – 12,000 rpm Control: HEIDENHAIN TNC 426/430 Feed (X/Y/Z): stepless 20 – 15,000 mm/min Rapid traverse: 30 m/min Tool changer: 25 stations Tool data: Ø 80 / 130 mm | Max. length: 315 mm | Max. weight: 8 kg Total power requirement: 60 kW Machine weight: approx. 9.6 t Dimensions (L x W x H): 4.53 x 2.60 x 2.50 m Accessories Electronic hand pendant Chip conveyor (screw conveyor) Coolant system ✅ Your advantages at a glance: Immediately ready for operation – machine is connected and can be tested Heavy-duty 3-axis machining center High spindle speeds & feed rates for efficient machining Cjdpfoxphdgjx Ah Uori On-site loading possible Attractive price-performance ratio Location: 69181 Leimen Fixed price: €10,000 If you are interested or would like to arrange a viewing/test run, please get in touch!

Condition: new, Year of construction: 2025, Completely refurbished machine, as new, modernized to the legally prescribed "state of the art" safety standard in accordance with the safety regulations of the employers' liability insurance associations. Switch cabinet electronics Installation of a new CE - control cabinet according to the current legal regulations of the professional associations BGVA 3 / DIN-EN 60204-1 new machine standard. Optionally complete machine in CE execution. A CE declaration of conformity is issued for the machine. With this FPS Werkzeugmaschinen GmbH acts as manufacturer. The machine fulfills the requirements of the BETRIEBS-SICHERHEITSVERORDNUNG- Betr.SichV. The year of manufacture corresponds to the date of delivery of the machine. EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control system 3-axis - FPS Active - digital display Speed 25 - 2500 rpm geometrically stepped direct gear with 18 speed steps for maximum torque / milling power Feed rate 5 to 500 mm/min, infinitely variable rapid traverse 1,2 m/min quill Extendable quill, vertical 100 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100mm Crjdpfxoh Sptns Ah Uji Axes X/Y/Z 800/300/400 mm Table rigid angular table 1000x440mm, load 2000kg Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder - etc.

Condition: like new (used), functionality: fully functional, Universal milling machine Deckel FP3 with new 3-axis FPS active digital display Heidenhain General overhaul by FPS 2015 Mint condition Crsdeu Dm E Hjpfx Ah Usi Technical data: >> Year of construction 1980 Machine no. 2201-5045 >> Rigid angle table >> Speed: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> rapid traverse in 3 axes >> Drive power .:2,0 / 4,0 KW >> Spindle brake >> Travel X/Y/Z: 500/300/400 mm >> Vertical milling head can be moved 200 mm on headstock >> Vertical quill and horizontal quill - SK40 extendable >> Tightening system M16 >> Weight approx. 1500 kg Accessories and equipment: >> 3 axes active digital display Heidenhain (latest version) >> Coolant device >> Central lubrication To the machine : On offer is a Deckel FP3 universal milling machine in mint condition. The FP3 was overhauled by FPS in 2015 and has only been used a little since then. The machine has little crank play and all spindles can be moved easily. On this newer FP3 model, the feed is infinitely variable in three axes, and the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. An oil change has been carried out. Mechanically and electrically tested. The digital display from Heidenhain makes work easier and even more precise. Take the opportunity to inspect and try out this machine on site under power. The machine is available immediately.

Condition: new, Year of construction: 2025, General refurbished, as good as new machine, modernized to the legally prescribed safety standard "state of the art" according to the safety regulations of the employers' liability insurance associations. Switch cabinet electronics Installation of a new CE - control cabinet according to the current legal regulations of the professional associations BGVA 3 / DIN-EN 60204-1 new machine standard. Optionally complete machine in CE execution. A CE declaration of conformity is issued for the machine. With this FPS Werkzeugmaschinen GmbH acts as manufacturer. The machine fulfills the requirements of the BETRIEBS-SICHERHEITSVERORDNUNG- Betr.SichV. The year of manufacture corresponds to the date of delivery of the machine. EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control system 3-axis - FPS active - digital display Speed 50 - 2500 rpm geometrically stepped direct gear with 18 speed steps for maximum torque / milling performance Feed rate 6,3 to 630 mm/min, infinitely variable rapid traverse 1,3 m/min Quill Extendable quill, vertical 60 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100mm Axes X/Y/Z 500/400/400 mm Table Rigid angular table 800x460mm Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head Cjdpfx Aoh R S Tcjh Usri - counterholder - etc.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Universal milling machine Deckel FP2 repowered by FPS built in 2013 with 3-axis digital readout Heidenhain ND 780 As good as new !!! Technical data: >> Machine no. 2202-7020 FPS no. 3364 Year of construction 2013 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power .:2.2 KW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK- 40 >> Tightening system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital readout Heidenhain ND 780 >> Brake motor with immediate spindle stop >> Central lubrication Csdpfx Aevbifgsh Ueri >> 2 x emergency stop >> Operating instructions >> Coolant device To the machine : We offer a universal milling machine Deckel FP2 repowered by FPS in mint condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine has an electric central lubrication system. With two emergency stop switches for safety. Mechanically and electrically tested as of 2013. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out the lids under power on site. The machine is available immediately.

Condition: used, Motor output 3 kW total power requirement 3 kw Weight 1.400 kg Crjdpfxev Nq Ske Ah Uoi

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed very good CONDITION Technical data: >> Year of construction 1990 Machine no. 2102-5046 >> Rigid angle table >> Speed: 40 - 2000 rpm Credpfxou Um Ere Ah Uji >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 >> Electrical central lubrication >> Coolant device >> Operating instructions, spare parts plan Gojs3G About the machine : Universal milling machine Deckel FP1 built in 1990 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital readout K&C New and 3-axis stepless feed Super CONDITION Technical data: >> Year of construction 1983 Machine no. 2102-2444 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock Crjdjtwlwzopfx Ah Uoi >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital indicator K+C Newly assembled with manufacturer's warranty and operating instructions. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Coolant device >> Operating instructions, spare parts plan To the machine : We are offering a Deckel FP1 universal milling machine built in 1983 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. The FP1 was in a training workshop where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. Take the opportunity to inspect and try out this little gem under power on site.

Condition: good (used), functionality: fully functional, Universal milling machine Deckel FP2 in special paint finish light gray with 3-axis digital display K+C NEW Technical data: >> Machine no. 5983 Year of construction approx. 1975 >> Rigid angular table (newly revised) >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power .:2,2 KW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK- 40 >> Tightening system S20x2 >> Weight approx. 1100 kg Crodpfx Ahou I Rm Ne Uei Accessories and equipment: >> 3-axis digital display K+C Newly assembled with manufacturer's warranty. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Operating instructions for digital display >> Coolant device To the machine : We offer a universal milling machine Deckel FP2 in good condition. The Deckel has very little crank play and all spindles can be moved easily. The machine has been completely dismantled and repainted. An oil change has been carried out. Mechanically and electrically tested. The digital display from K+C makes work easier and even more accurate. You also have a 1 year guarantee on the new digital display. Take the opportunity to inspect and try out the lids on site under power. The machine is available immediately.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 with 3 - axis digital readout Heidenhain original condition !!! Technical data: Crodpfx Aou Nvxmsh Uji >> Machine no. 56560/08 Year of construction approx. 1975 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed 2 axes >> Drive power .:1 / 1,5 KW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill - SK40 >> S20x2 tightening system >> Weight approx. 700 kg Ecvf9Jfv9 Accessories and equipment: >> 3-axis digital display Heidenhain >> Coolant device About the machine : We offer a universal milling machine Deckel FP1 in very good original condition. The Deckel has very little crank play and all spindles can be moved easily. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more precise. Take the opportunity to inspect and try out the lids on site under power.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital display K&C infinitely variable feed in light gray Super condition Technical data: >> Year of construction 1978 Machine no. 2101-0465 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed stepless 2 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Rapid traverse >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 Cjdpfx Ahet Aav Ie Usri >> Tightening system S20x2 >> Weight approx. 700 kg Accessories and equipment: >> 3-axis digital indicator K&C Newly assembled with manufacturer's warranty and operating instructions. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Coolant device To the machine : We are offering a Deckel FP1 universal milling machine in very good condition. The machine has very little crank play and all spindles can be moved easily. The bellows are all new. On this newer FP1 model, the feed is infinitely variable in two axes and the machine also has a rapid traverse. An oil change has been carried out. Mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. Take the opportunity to inspect and try out this machine on site under power.

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital readout K&C New and 3-axis stepless feed Super CONDITION Technical data: >> Year of construction 1985 Machine no. 2102-2867 >> Turn-tilt-swivel table (newly planed) >> Speed: 40 - 2000 rpm >> feed stepless in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW Csdpfxjt Aarpe Ah Ueri >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system M16 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital indicator K+C Newly assembled with manufacturer's warranty and operating instructions. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Coolant device >> Operating instructions, spare parts plan To the machine : We are offering a Deckel FP1 universal milling machine built in 1985 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. An oil change has been carried out. Mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. Take the opportunity to inspect and try out this machine under power on site.

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, Universal milling machine Deckel FP1 with 3-axis digital readout RSF 2006 Overhauled TOP Crsdpfx Aovb Ud Ujh Uoi Technical data: >> Machine no. 53819/08 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed 2 axes >> Drive power .:1 / 1.5 KW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill and horizontal quill - SK40 >> Spindle brake >> Tightening system S20x2 >> Weight approx. 700 kg Accessories and equipment: >> 3-axis digital display from RSF Elektronik >> Coolant device >> Machine feet To the machine : We are offering a Deckel FP1 universal milling machine in very good condition. The Deckel has very little crank play and all spindles can be moved easily. An oil change has been carried out. The FP1 was overhauled by Huttelmaier in 2006 and has been used very little since then. The digital display from RSF makes work easier and even more precise. Take the opportunity to inspect and try out this machine under power on site.