Used Deckel Fp 5 Nc for sale (720)

Condition: used, Year of construction: 1976, x-travel 350 mm y-travel 150 mm z-travel 340 mm table surface area 600 x 210 mm spindle taper SK 40 spindle turning speed range 40 - 2000 U/min Nodswwwr Espfx Ag Ioku feeds 5 - 500 mm/min rapid traverse 1,2 m/min total power requirement 1,9 kW weight of the machine ca. 0,7 t - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, various tool fixtures, various collets, original DECKEL tool cabinet

Condition: used, Year of construction: 1978, x-travel 300 mm y-travel 160 mm z-travel 340 mm table surface area 600 x 210 mm spindle taper SK 40 spindle turning speed range 40 - 2000 U/min feeds 5 - 500 mm/min rapid traverse 1,2 m/min total power requirement 1,9 kW weight of the machine ca. 0,7 t - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, counter bearing, various tool fixtures, Nodpfswl N R Njx Ag Ioku various collets, original DECKEL tool cabinet

Condition: not inspected (used), Please see technical details on photo. Nsdpfx Aohvzxzeg Ioku

Year of construction: 1982, condition: refurbished (used), Universal tool milling machine Make: DECKEL Model: FP 3 Active year of construction: 1982 - overhauled, new painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey-blue machine no.: 2201-5539 with warranty geometric acceptance with test report accessories: - 3-axis active digital display HEIDENHAIN TNC 111 Nkodopn Rgvopfx Ag Ieu - Universal table 650 x 370 mm (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread M 16 - Central lubrication, manually operated - coolant device - Operating instructions used as seen The machine corresponds technically the state of the art of the year of construction.

Condition: used, Year of construction: 1989, Universal tool milling machine Make: DECKEL Nsdpfx Agor En Dys Ioku Model: FP 1 Active Year of manufacture: 1989 - workshop tested Machine no.: 2102-5561 Milling head type: 2171 Milling head number: 4393 geometric acceptance with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X-, Y- and Z-axis - Fixed table 600 x 210 (T-slot: 12 mm) - SK 40 vertical milling head with tightening thread S 20 x 2 - Coolant device - Central lubrication, electric - Operating instructions used as seen, without guarantee The machine corresponds technically the state of the year of construction at that time.

Condition: used, Year of construction: 1979, x-travel 800 mm Nkedewwwqhopfx Ag Iou y-travel 300 mm z-travel 400 mm turning speed range 25 - 2.000 U/min power capacity 4 kW feed 5 - 500 m/min rapid traverse 1,5 m/min work table: 1.000 x 700 tool taper SK40 weight 1,8 t dimensions of the machine ca. 2,50 x 2,40 x 2,00 m The machine is in good condition. The digital display is defective (the scales are ok) Extra interchangeable milling head. No accessories.

Condition: used, x-travel 390 mm y-travel 200 mm Nkjdjxfb Hgjpfx Ag Iju z-travel 390 mm table-size 775 x 330 mm spindle taper ISO Sk 40 spindle turning speed range 40 - 2000 U/min quill stroke 40 mm total power requirement 2,2 kW weight of the machine ca. 1,4 t dimensions 1,75 x 1,5 x 1,8 m Universal Milling Machine - Digital Display - Chip Guard - Coolant System - Machine Light - Chip Tray - Machine Feet - Operating Instructions

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, table length: 790 mm, table width: 460 mm, Table size 790 x 460 mm Nodpfewffymox Ag Isku Longitudinal travel 500 mm Transverse travel 400 mm Vertical travel 400 mm Spindle travel 90 mm Spindle taper ISO 40 Spindle speeds 50 - 2,500 rpm

Condition: used, Year of construction: 1985, machine/vehicle number: 2204 - 0469, x-travel:580 mm y-travel:400 mm z-travel:450 (390*) mm table-size:460 x 800 mm Nkedpfx Ajcxxwaeg Isu spindle speeds:40 - 4000 U/min feed range:2 - 3600 mm/min feed:4.0 m/min spindle taper:SK 40 dimensions of the machine ca.:3,0 x 2,10 x 2,10 m spindle motor:4,0 kW control:Contour 2 The Deckel FP4 A Universal Milling Machine - CNC - Spilndle Head can be swiveled 90 ° (Right or left) - Angular Fixed Work Table: 800 x 460 mm - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872 - Portable Handheld operating unit for easy control of machine - 4.0 kw Motor for Main Spindle. - Central Lubrication and Coolant system, Seperate Power cabin - Chip tray with Splash protection offering More clean and safe working envoirnment.

Condition: used, Year of construction: 1986, machine/vehicle number: 2204-0929, x-travel:560 mm y-travel:500 mm z-travel:450 / 390 mm quill stroke:80 mm feed:2 - 3600 mm/min table surface area:800 x 460 mm spindle turning speed range:40 - 4000 U/min spindle taper ISO:ST40 spindle head swivable left - right:+/- 90 ° control:Contour 2 total power requirement:4,0 kW weight of the machine ca.:2,8 t dimensions of the machine ca.:2,0 x 2,5 x 2,2 m The Deckel FP4 A Universal Milling Machine - CNC - Spilndle Head can be swiveled 90 ° (Right or left) Njdpfx Agecxxrie Ieku - Angular Fixed Work Table: 800 x 460 mm - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872 - Portable Handheld operating unit for easy control of machine - 4.0 kw Motor for Main Spindle. - Central Lubrication and Coolant system, Seperate Power cabin, Chip tray

Condition: used, machine/vehicle number: 2819-0517, x-travel:300 mm y-travel:300 mm z-travel:400 (340 with Apron) mm surface area:390 x 620 / Chip tray mm turning speeds:40- 2500 U/min feed range:02 - 3600 mm/min rapid feed:4,0 m/min control:Contour 3 - 3D path Control System spindle taper:SK40 quill stroke:60 mm milling-head swivable +/-:90* spindle drive motor:2,0 kW total power requirement:1,6 / 2,0 kW weight of the machine ca.:1,3 t dimensions of the machine ca.:1,8 x 1,8 x 1,8 m Deckel FP2A Universal Milling Machine Nksdpfjcxxp Tox Ag Ieu - Spilndle Head can be swiveled 90 °, can be used as vertical and horizontal machining Center. - Rigid Angle Table: 620 x 390 mm (Max. Load 250 kg) - Extendible sleeves: vertically 80 mm, horizontally 60 mm - Hydralic clamping system SK40 with Pull studs DIN 2080 or DIN 69872 Seperate Power Cabin, Central Lubrication and Coolant System, Chip tray and Splash Gaurd

Condition: used, machine/vehicle number: 0736, x-travel:800 mm y-travel:300 mm z-travel:400 mm work table::1000 X 440 spindle turning speed range:40 - 2000 RPM/min turning speeds steps:18 feed range:10-500 mm/min feed steps:18 rapid traverse:1,50 m/min inner taper of milling spindel:SK40 total power requirement:2,2 kW weight of the machine ca.:2 t dimensions of the machine ca.:1,57 x 1,68 x 1,85 m Deckel FP2 LB Universal Milling Machine - Spilndle Head can be swiveled left or right (90°) - Rigid Angular Table: 1000 x 440 mm - Quick lever for Rapid Feed Travese Nkedpfecxxyhsx Ag Iou Seperate Power cabin and has a Chip tray for clean safe working Area.

Condition: ready for operation (used), Cover FP 1 Milling machine Traverse path X-axis: 300mm Nodpfxeuvih He Ag Ieku Y-axis travel: 160mm Z-axis travel: 340mm Mounting: SK 40 with tightening thread Feed X-axis: 290mm Weight: approx. 940 kg (with pallet) Space requirement: 1300mm x 1200mm x 1800mm ( L x W x H ) Dimensions with pallet: 1400mm x 1400mm x 2000mm ( L x W x H ) You are welcome to come by for a viewing. We are happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: good (used), Year of construction: 2003, travel distance X-axis: 1,060 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, feed rate X-axis: 15,000 m/min, feed rate Y-axis: 15,000 m/min, feed rate Z-axis: 15,000 m/min, total height: 2,800 mm, total length: 3,200 mm, total width: 2,900 mm, table width: 800 mm, table length: 1,500 mm, table load: 550 kg, rotary table diameter: 800 mm, spindle motor power: 20,000 W, Chip conveyor 3D measuring probe Paper filtration IKZ 15 Bar Under power X - Travel: 1060mm Y - Travel: 710mm Z - Travel: 710mm A - Axis: 360000° B - Axis: - 30 to + 120° Table Length: 1500mm Table Width: 800mm Table load: 550 Table Ø: 800mm Feed rate X-Axis: 15000mm/min. Feed rate Y-Axis: 15000mm/min. Feed rate Z-Axis: 15000mm/min. Nkjdpfxsym Sdye Ag Ieu Spindle Taper: 40ISO/Bt/Mk Power on spindle: 20kW Speeds / ranges: 12000Rpm ATC / revolver: 32 Coolant through spindle / Bar:15 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 3200mm Width: 2900mm Height: 2800mm Weight: 9500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2005, travel distance X-axis: 760 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, total height: 2,450 mm, total length: 5,200 mm, total width: 4,500 mm, table width: 500 mm, table length: 630 mm, table load: 300 kg, overall weight: 12,000 kg, 5-axis CNC machine (VMC) DECKEL MAHO - DMC 60T MACH-ID 9443 Make: DECKEL MAHO Type: DMC 60T Control: HeidenHain iTNC530 Year: 2005 € 12.500,00 X - Travel: 760mm Y - Travel: 560mm Z - Travel: 560mm A - Axis: 360000° B - Axis: - 30 to + 120° Table Length: 630mm Table Width: 500mm Table load: 300 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 26kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:15 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 5200mm Nsdpfx Agoym R Tgo Ieku Width: 4500mm Height: 2450mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, 5-axis CNC machine (VMC) DECKEL MAHO - DMU80P MACH-ID 9194 Make: DECKEL MAHO Type: DMU80P Nkjdpew Rdl Dofx Ag Iou Control: HeidenHain TNC430 Year: 2000

Condition: good (used), Year of construction: 2006, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 50,000 m/min, rapid traverse Y-axis: 50,000 m/min, rapid traverse Z-axis: 50,000 m/min, table width: 380 mm, table length: 500 mm, table load: 200 kg, mount diameter: 30 mm, Measuring probe TS640 Tank 600 L with 40 Bar IKZ Extended chip conveyor for 30/60 Tools ATC Direct measuring scales also in B & C Axis Air true spindle over M-Function X - Travel: 500mm Y - Travel: 450mm Z - Travel: 400mm A - Axis: 360° B - Axis: 0 - 108° Table Length: 500mm Table Width: 380mm Table load: 200 Feed rate X-Axis: 50000mm/min. Feed rate Y-Axis: 50000mm/min. Feed rate Z-Axis: 50000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 35kW Speeds / ranges: 18000Rpm Nkjdew Rl Igjpfx Ag Ieu ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 3+2 Chip conveyor: yes Coolantsystem: yes Length: 3800mm Width: 3200mm Height: 2800mm Weight: 6500kg

Condition: used, Motor output 3 kW Nkjdpfx Ajv Nq Skog Iju total power requirement 3 kw Weight 1.400 kg

Condition: good (used), Year of construction: 2002, Control HEIDENHAIN TNC 430 Spindle speed 20 - 9,000 rpm Travel X= 500, Y= 400, Z= 400 mm Tool holder SK 40 Tool changer with 16 stations Nsdpjwglfxefx Ag Ieku Rotary table with B and C axes Travel measuring system with correction Clamping surface Ø 700 x 500 mm Max. table load 200 kg Infrared probe for workpiece measurement A lot of aluminum has been machined!

Condition: ready for operation (used), Year of construction: 2007, operating hours: 23,663 h, travel distance X-axis: 560 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, total height: 2,500 mm, overall weight: 10,600 kg, number of axes: 4, This 4-axis DECKEL MAHO DMC 55H duoBlock was manufactured in 2007. It features X, Y, Z movements of 560 mm, 600 mm, and 600 mm respectively, and a spindle speed of 12000 rpm. The machine includes a SK40 spindle taper, a 60-position tool magazine, and four 400x400 mm pallets with a 1-degree indexed 4th axis. Consider the opportunity to buy this DECKEL MAHO DMC 55H duoBlock horizontal machining centre. Contact us for more information about this machine. Additional equipment • 4 Pallets 400 x 400 included with machine, indexed 4th axis by 1 degree • Workpiece probe • Internal cooling • Large coolant tank with automatically coated filter paper Machine Benefits Technical Machine Benefits Nkjdpfx Asx I S Shjg Isu • Table size: 400 x 400 mm • Tool magazine: 60 positions Extra Information Machine still under power Dimensions Machine Depth 6000 mm Technical Specification Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2007, controller manufacturer: SIEMENS, controller model: 840D Control, number of axes: 4, This 4-axis DECKEL DMC 835 V was manufactured in 2007. It features an NC dividing head EA 410, manual tailstock, and a TS 640 measuring probe. Additional highlights include a coolant/air blast switch, flushing gun for chip removal, and an electronic handwheel. This machine is complete with accessories. If you are looking to get high-quality milling capabilities consider the DECKEL DMC 835 V machine we have for sale. Contact us for more information. Additional equipment • NC dividing head EA 410 • TS 640 measuring probe • Coolant/air blast switch • Flushing gun for chip removal • Electronic handwheel – Operating mode 4 Machine Benefits Technical Machine Benefits Nkjdpex D Iu Usfx Ag Iou • Manual tailstock • Faceplate diameter: 160 • Three-jaw chuck diameter: 160 • Machine complete with accessories • On hour 17275 / spindle hours 5803 Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2005, operating hours: 18,700 h, controller manufacturer: SIEMENS, controller model: Sinumerik, table load: 3,100 kg, overall weight: 24,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 35,000 W, tool weight: 6,000 g, number of axes: 3, This 3-axis DECKEL MAHO DMF 250 linear was manufactured in 2005. It features a robust vertical machining center with a high-speed main drive up to 40 kW and rapid traverse rates of 100 m/min on the X-axis and 60 m/min on Y- and Z-axes. The work table measures 3,100 × 900 mm with a load capacity of 3,100 kg. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMF 250 linear machine we have for sale. Contact us for more information. Additional equipment • Safety Equipment: Monitored and locked work area door; Key switch for normal and set-up mode; Limited functions when the door is open Machine Benefits Technical Machine Benefits Nkodpox Nr Tuefx Ag Iou • Feed speed: up to 20000 mm/min • Clamping surface: 3100 × 900 mm • T-slots: 9 pieces, 100 mm apart • Tool magazine capacity: 30 places • Resolution of measuring system: 0. 001 mm • Electrical connections: mains connection 3n/pe~400/230 v, 50/60 hz; power consumption 82 kva • Pneumatics: compressed air 5. 5-8 bar; air volume 25 m³/h (without cooling), +20 m³/h with cooling • Weight (kg): with accessories: up to 29280 kg Extra Information Room Temperature: +15°C to +35°C Humidity: 20-75% Tool magazine size 120 -Magazine cabinet -Tool change is performed via a shuttle -Tool holder only on request and subject to availability (extra) -Machine is a 3-axis machine (rotary table not available) A further configuration or the AB is no longer available. Z-axis brake defective, roller shutter in machine room defective, screen cable defective

Condition: used, Year of construction: 2013, x-travel 635 mm y-travel 510 mm z-travel 460 mm control Sinumerik 840 D SL Siemens Nsdpjym Dz Refx Ag Ieku turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 83 / 57 Nm tension force 8 kN table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - distance 100 mm T-slot - width 4x 14H12 / 1x 14H7 mm max. table load 600 kg table height over floor 720 mm distance spindle nose and table 120 - 580 mm number of toolpositions 30 pos. Max. mould width 80 / (130) mm max. tool length 250 mm max. tool weight 6 kg max. total weight 80 kg change-time tool to tool 1,6 sec change-time chip to chip 6,0 sec rapid traverse 30 m/min feed speeds 1 - 20.000 mm/min Feed force max. 5 kN total power requirement 28 kVA weight of the machine ca. 3,8 t dimensions of the machine ca. 3,5 x 4,0 x 2,7 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 635 V New Design - ShopMill - WITHOUT perforated plate - WITHOUT clamping device - WITHOUT tools

Condition: ready for operation (used), Year of construction: 2001, operating hours: 28,585 h, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 9,000 rpm, number of axes: 5, This 5-axis DECKEL MAHO DMU 50T was manufactured in 2001. It features a maximum spindle speed of 9,000 RPM and an impressive X-axis travel of 500 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. The machine includes a turret with 16 positions and a round axis diameter of 700 mm. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMU 50T vertical machining centre we have for sale. Contact us for further details. Nodpfjympuvsx Ag Ieku • Round axis: dia 700 x 500 • Turning of the table: 360 deg • Swing zone: deg • Positions in turret: 16 Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2000, operating hours: 18,082 h, functionality: fully functional, machine/vehicle number: 1098000194, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 900 mm, nominal power (apparent): 46 kVA, controller manufacturer: HEIDENHAIN, total height: 3,200 mm, total length: 8,000 mm, total width: 4,000 mm, table width: 1,000 mm, table length: 1,200 mm, overall weight: 20,000 kg, operating hours of spindle: 10,403 h, number of slots in tool magazine: 60, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, Equipment: chip conveyor, DECKEL MAHO DMU 125 P Universal Machining Center - Tool holder: SK 40 - Table with 9 T-slots The machine is equipped with a 60-position tool changer, including the tool holders shown in the photos installed in the tool magazine, as well as a chip conveyor and coolant system. Attention: Machine vises shown in the photos are not included! Attention: The machine will be disassembled for transport to a width of 2900 mm (removal of tool changer). Njdpoym Snrsfx Ag Ioku Attention: The item must be collected on a binding date agreed between 21/04 and 30/04/2026. FCA D-96257 Marktgraitz – loaded onto truck.