Dewalt dw 626 for sale

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
6

Joiners circular saw DEWALT DW 8001

Heule, BelgiumBelgium dealership location
6169 km
used
motor: 1,5 kW stroke: 50 cm motor (saw) tilting Be2gpzqjp8 angle arm can be changed sawblade diameter: 200/250 mm more
6
Designed for all manner of professional users, this highly reliable machine is ideal for cross cutting, bevel and mitre cutting most hard and soft woods. Robust construction, including strengthened column assembly and base support for the arm and provision for adjustment means the DW721 will remain accurate and serviceable throughout its life. Serial number 0046 2hp, 230V motor 3000rpm blade speed 300mm, 32 tooth saw blade with 30mm bore Max. crosscut capacity 507mm Bmx0mqbe Max. depth of cut ... more
6

Radial arm saw DEWALT DW 729

More Dewalt Dw 729
Klipphausen, GermanyGermany dealership location
6814 km
2008
used
Zphstwop Radial arm saw DEWALT DW 729 Saw blade tiltable up to °: 105 Cutting height mm: 110 Cutting width mm at 90°: 525 Saw blade diameter mm: 350 Saw arm tiltable up to °: 105 Main motor power kW: 3,3 With base frame: Yes CE-mark: Yes Total connection kW: 4 Required space LxWxH mm: 2700x1300x1700 Operating status: not connected more
2
Gehrungskappsäge Fabrikat: Dewalt Typ: DW 700 Bfflbanz37 1200 W more
1
Circular saw Dewalt Bezxxxbxdc type: DW 110 sawmotor tiltable right – left each 90° sawmovement manual motor 1,5 kW cutting length 380 mm with machine stand more
2

Dewalt radial saw DW 110 Dewalt (33865)

Gerolzhofen, GermanyGermany dealership location
6672 km
used
cleaned, function checked, test run greased used manufactured by Dewalt type DW 110 Masch.-No. CT 7.3 / 3221 Xujel7njr motor 1,5 kW cut height ca. 100 mm cut length 380 mm blade diameter ca. 250 mm internal saw blade diameter 30 mm swiveling tiltable longitudinal cut underframe table length right hand 600 mm table length left hand with fence and scales 1000 mm saw feeder manual required space ca. l x w x h mm 1900 x 1000 x 1500 located in 97447 Gerolzhofen sale in current condition  as se... more
2
Dewalt DW677 1.5mm Planer with tungsten carbide tipped reversible blades, parallel fence, dust extraction spout. Available in 110 or 240 volts. Features: Low weight and perfect balance make this planer ideal for single handed use in awkward applications Front handle depth control in clearly marked 0.1 mm steps for accurate setting with a positive stop position. A large planer blade drum rotating at high speed provides an excellent finish High power motor for smooth results, even in hard woo... more
8
Heavy robust round wood block foerderer with hydraulic ejector. Machine dimensions: length 8700 mm, width 530 / 1400 mm, height 850 mm, height from ground 630 mm Hydraulic ejection takes place in the transport direction to Rechs Used to hand over to a gate Power motor with gearbox 5.5 kW, Total weight 2000 kg C7m3uhr more
2

Edwards EDM12 - Pumpen Edwards EDM12 - Pump

Barneveld, NetherlandsNetherlands dealership location
6266 km
used
Make Edwards High Vacuum, Type EDM 12, Material Mild steel, Pump , Number of pumps: 2 stages, Inlet "inlet catchpot ITC20", Outlet +/- 17mm, [...] 01730, With switch , Floorspace 0,7x0,2 M, Total height 0,5 M, Weight 35 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Visit our website Foeth for more ... more


dewalt dw ...
daily

New machines via email!

Stay updated!
6

Machining centers (vertical) Leadwell V-30iF

Kaiserslautern, GermanyGermany dealership location
6526 km
2017
ready for operation (used)
General Data Measurements width 2170 mm Measurements depth 2250 mm Measurements height 1810 mm Machine weight 3700 kg Control Unit Brand Heidenhain Model TNC 620 Td0yhay9 Main Drive Number of spindles 1 Spindle speed range 12000 1/min Movement X-Axis Movement 800 mm Y-Axis Movement 460 mm Z-Axis Movement 510 mm Table Outer length 860 mm Outer width 450 mm Tslots size 18 mm Number of tslots 3 Distance between 125 mm Table load 300 kg Tools Max weight 7 kg Media Main electronic connection 4... more
7

Shredder Doppstadt, Calbe DW 306 Ceron

Stuhr bei Bremen, GermanyGermany
6426 km
2012
good (used)
Shredder Doppstadt, type DW 306 Ceron Technical data: Manufacturer: Doppstadt, Calbe Type: DW 306 Ceron Year of construction: 11/2012 Drive power: 380 kW Speed: 2.000 min-1 Armature voltage: 460 V Armature current: 874 A Field voltage: 340 V Field current: 4,9 A Protection type: IP 54 Roller length: 3.000 mm Roller diameter: 600 mm Height of roller tools: 130-174 mm Zsa9xp32 Number of roller tools: 21 Comb length: 3.000 mm Height of comb tools: 130-174 mm Number of comb tool... more
4
MOTORISCHE DRAHT- & BLECHWALZE BÜHLER HDW 120 - 03-99-001 Lieferzeit: sofort Nummer: 03-99-001 Hersteller: Bühler Typ: HDW 120 MASCHINENDATEN Baujahr: ca. 1980 L x B x H: ca. 500 x 700 x 1400 mm Gewicht: ca. 300 kg Guter Allgemeinzustand Cq9elatw TECHNISCHE DATEN GEEIGNET ZUM PLATIEREN VON LEICHTMETALLEN Walzen - Breite: ca. 120 mm Walzen - Durchmesser: ca. Ø 60 mm Draht Ø: ca. 0 - 8 mm Materialstärke: ca. 0 - 8 mm ZUBEHÖR • Vorwärts / Rückwärts • Draht ... more
6
L + Z lathe GDW type LZ 360 S Precision control and lathe Fabr. No. 1104-116 / 07 model year 2002 Top width 800 mm Turning diameter over bed 355 mm Swing over cross slide 195 mm Tip height over bed 175 mm Tip height over cross slide 97 mm Spindle bore 43 mm Longitudinal feed and plan Chuck short taper DIN 55027 Gr. 5 (4 x M10) Tailstock inner cone MT 3 Pinolverstellung / Quill stroke 110 mm Spindle speed 30-3000 rpm. 5.5 kW Power-11 kW Power supply 400 Volt, 50 Hz -Continuously ... more
15
Serial No. 01/415/024 Control Cybelec V-DNC 1200/D Back gauge Programmable Guards Sick Be9vhtf807 Capacity 100 ton / 101,600 kgs x 3100mm Maximum length of bend 3100mm Between frames 2750mm Daylight 340mm Throat depth 400mm Stroke length 215mm Input 415/3/50 ac 7.5 kW Tooling Full Length Single Vee & Top Tool Actuated via Wander Type Foot Switch Fitted with Rear & Side Guards and 2 x Front Work Supports X=Back gauge in/out X & X1 Y=Beam rise & fall Y1 Y2 R=Fingers rise & fall R Z= Fingers left/... more
2
Make Edwards Ltd, Type IDX 1000, [...] 169422739, Material Mild steel, Pump "dry vacuum", Capacity 1000 m3/hr, Without motor (max 30 kW), Inlet dia. 200 mm, Outlet dia. +/- 120 mm, New 2016, Mounted on frame , Floorspace 1,8x0,8m, Total height 0,9m, Weight 1600 KG, Extra Specifications Needs to be overhauled; not functional What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. Y... more
8

Machining centers (vertical) Leadwell V-40

Kaiserslautern, GermanyGermany dealership location
6526 km
1999
ready for operation (used)
General Data Measurements width 2990 mm Measurements depth 2250 mm Measurements height 2600 mm Machine weight 5000 kg Control Unit Brand Fanuc Model Series 18-M Btulstii Movement X-Axis Movement 1020 mm Y-Axis Movement 510 mm Z-Axis Movement 510 mm Table Outer length 1200 mm Outer width 500 mm Media Main electronic connection 380 V Power consumption 20 kVA This Leadwell V-40 Vertical Machining Center was built in Taiwan in the year 1999. It has been working for approximately 35000 hours si... more
4

Guillotines Edwards 10 / 4000 Edwards 10 / 4000

Birmingham , United KingdomUnited Kingdom dealership location
5775 km
ready for operation (used)
Used Edwards 4 Metre x 10 mm Hydraulic Guillotine For Sale:   Model: 10/4000 Machine capacity: MM: 10 x 4060 Inches: 3/8 x 160 Front operated back gauge Be98o8dgf3 Powered back gauge IC 600 control Can be seen working more
3

Späneförderer Goodway SB 289

Bruchsal-Büchenau, GermanyGermany
6593 km
2010
excellent (used)
SCHARNIERBAND - SPÄNEFÖRDERER GOODWAY SB 280 - 27-02-007 Lieferzeit: sofort Bezgndfre7 Nummer: 27-02-007 Hersteller: Goodway Gvwuro Typ: SB 280 MASCHINENDATEN Baujahr: ca. 2010 L x B x H: ca. 2800 x 530 x 800 mm Gewicht: ca. 200 kg Sehr Guter - Zustand TECHNISCHE DATEN Art: Scharnierband - Förderer Abmasse Einschub: Länge: ca. 1600 mm Breite: ca. 500 mm Höhe: ca. 200 mm Bandbreite: ca. 280 mm Bandlänge: ca. 1600 mm Auswurfhöhe: ca. 700 mm Weiteres Zu... more
8

Woodwaste Briquetting Press Weima C150

Liverpool, United KingdomUnited Kingdom
5677 km
2012
good (used)
Weima C150 Woodwaste Briquetting Press and Bagging Carousel - 2012 CE Suitable for wood shavings , paper and other materials , where moisture content is below 18% Hopper size 1040 x 1040 x 785mm Hopper volume 0.85m3 Output - 30- 50kg/h [ dependent on material ] Briquette dia 50mm Hydraulic motor 5.5kw Hydraulic tank capacity 100L Automatic controil of briqutte length Complete with B3t09tt Modle CSL 10 Automatic carousel bagging station, turning constantly and is filled to equ... more
12
Serial No. 2439 Control Cybelec Euro Back gauge programmable Guards "sick" Maximum length of bend 3100 mm J8s7kz Between frames 2590 mm Daylight 400 mm Throat depth 250 mm Stroke length 150 mm Input 415/3/50 5.5 kw Tooling Full length top and bottom Actuated via wander type foot switch Fitted with rear and side guarding X=Back gauge in/out X Y=Beam rise & fall Y1 & Y2 Length 13' 4" Width 6' 4" Height 8' 4" more
2
Make Edwards Ltd, Type IDX 1000, [...] 169428948, Material Mild steel, Pump "dry vacuum", Capacity 1000 m3/hr, Without motor (max. 30 kW), Inlet dia. 200 mm, Outlet dia. +/- 120 mm, New 2016, Mounted on frame , Floorspace 1,8x0,8 M, Total height 0,9 M, Weight 1600 KG, Extra Specifications Needs to be overhauled; not functional What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide... more
15

Shredders Doppstadt DW 3080 E-1

bt70 3ey, United KingdomUnited Kingdom dealership location
5402 km
ready for operation (used)
Bfe9eoajra Year: 2000 Operating Hours: 4400 Main drive motor LAK4225-A, 210 kW DC, rated current 420A (LAK4225-A is a modern direct current motor) Starting current is limited to the rated current 420A Main fuse on incoming power line should be minimum 630A (due to included starting equipment for conveyor belts) General information on the cutting system: The rotor is equipped with welded on replaceable wear plates for extra-long service life between repairs. The tool holders are welded on to the... more
4

Guillotines Edwards DD Guillotine Edwards DD Guillotine

Birmingham , United KingdomUnited Kingdom dealership location
5775 km
ready for operation (used)
Be98phulz7 Used Edwards Direct Drive Guillotine Model: DD 2metre (length) x 3.5mm (thickness) Digital (Elgo electric control) front operated back gauge Powered Back gauge Rapid blade Squaring arm / front supports     more
6
Grundplattengetriebe-3 spindle table dimension B-730 mm T-450 mm travel in depth 170 mm material thickness 15-40 mm 13 mm drilling depth Max Bohrenutzlaenge 20 mm shank diameter of the drill bit 10 mm compressed air 6 bar insertion force at 6 bar pressure approx. 280 kg engine power 1 .1kw Weight 125 kg Complete with Base cabinet and attacks 2 different fittings heads grass and Hettich Si8rcaze9 Good condition Location: Off the shelf 54634 Bitburg more
6

Woodwaste Shredder Ultra 60-24 SF Weima

Liverpool, United KingdomUnited Kingdom
5677 km
2012
good (used)
Hopper opening 600 x 1050mm Hopper volume 0.6m3 Rotor opening width 600mm Rotor diameter 252mm Rotor power 18.5kw Rotor speed 60 - 100rpm Number of knives 28. Each 4 sided concave 40mm x 40mm Complete with Worm screw model WSF-350-1-5 for connection to briquetter 35 degree angle with 1700mm discharge height Bfbotxcepo Gear motor 0.75 - 1.5kw Permanent Magnet Separator model SK20 3 x Magnets 200mm duct connection 250mm dia main body 635mm casing length Year - 2012 CE Co... more
10
Serial No. 2311 Control Cybelec Euro Back gauge Yes Guards Guardscan Nnjlb Capacity 65 Ton x 2500mm Maximum length of bend 2550mm Between frames 2050mm Daylight 350mm Throat depth 250mm Stroke length 165mm Input 415 / 3 /50hz 5.5kw Tooling Full length top & bottom Actuated via Wander type foot switch Fitted with side safety guards X=Back gauge in/out X Y=Beam rise & fall Y1 Y2 Length 3460mm Width 1800mm Height 2260mm Nett weight actual. 4,750 Kgs. / 4.68 Tons. more
2
Make Edwards Ltd, Type IDX 1000, [...] 159434827, Material Mild steel, Pump "dry vacuum", Capacity 1000 m3/hr, Without motor (max. 30 kw), Inlet dia. 200mm, Outlet dia. +/- 120 mm, New 2015, Mounted on frame , Floorspace 1,8x0,8m, Total height 0,9m, Weight 1600 KG, Extra Specifications Needs to be overhauled; not functional What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. Y... more
3
Machine type MIG/MAG welding system Make MERKLE Type OptiMIG 451 DW Connection voltage 3 x 400 volts Setting range 25 - 450 amperes Switch-on time 40% ED at 450 amperes 60% ED at 420 amperes 100% ED at 340 amperes Current setting 42 switching stages Cooling transformer by built-in fan Cooling burner water-cooled Bnxau8z Execution of mobile industrial plant Wire feed gearbox 4-wheel gearbox DV 26 Hedging 32 Ampere Dimensions L x W x H 990 x 510 x 1,135 mm ... more
2

Folders Edwards 2metre folder Edwards 2metre folder

Birmingham , United KingdomUnited Kingdom dealership location
5775 km
ready for operation (used)
Iqg7ugj Used hand operated Edwards box and pan 2metre / 2000mm folder for sale Complete with a full length of segmented tooling Brand new box and pan / straight folders also in stock for sale. 1.2metre / 1200mm box and pan folder also available in stock for sale. Purchased form a ducting / sheet metal canopy manufacturer. more
6
Straightening and welding plate SIEGFRIED WEYRAUCH Gemmingen Steel casting heavily ribbed Length 1000 mm Nm9lb Width 800 mm Thickness 28/125 mm Working height approx. 850 mm - Feet with adjustment screws for aligning the plate Weight 370 kg good surface more
7
Bffwkqqcg0 Complete line for weighing and bagging, two vibratory conveyors, flighted elevator conveyor, Yamato multihead weigher, Gainsborough VFFS and outfeed outconveyor. weight range 4g - 500g, up to 70 packs per min, variable speed, with smart date 5 coder more
12
Serial No. 98P263 Control Cybelec DNC 900 Back gauge programmable Guards " Sick " Capacity 100 ton x 3100 mm Between frames 2600 mm Daylight 350 mm Throat depth 400 mm Stroke length 210 mm Input 415/3/50 11 KW Actuated via Wander type foot switch Fitted with Crowning, hydraulic tool clamping, rear and side guards X=Back gauge in/out X Y=Beam rise & fall Y1 , Y2 R=Fingers rise & fall R Z= Fingers left/right Z1, Z2. Length 3.7M Width 2.9M ( including pendant arm) Tqkm9zg3 Height 2.6M Nett weight ... more
2
Make Brabender Technologie, Type DDW-MD5-FW40 / 3plus-50, No 03035306899, New 2004, Material Stainless steel, Metering screw , Screw diameter dia. 40mm, Inlet dia. 195mm, DN200 WAREX DKZ 103, Outlet dia. 100mm, With motor 0,55 KW 230 Volt (Ex), Hopper with flexible wall , Mounted on frame , With switch , Floorspace 1,2x0,5 M, Total height 1,3 M, Weight 200kg, Extra Specifications ATEX II 1/2D T135 What you can expect from Foeth: all our machines are in working condition, and at a reduced price c... more
5

CNC Lathe GOODWAY GS 460

Niederlangen, GermanyGermany dealership location
6338 km
2006
used
turning diameter:610 mm turning length:950 mm Stb3gk control:FANUC Series 0I- TC rapid power traverse in X-and Z direction:20 / 24 m/min turning diameter over bed:740 mm feed length:X = 340 mm total power requirement:37 kW weight of the machine ca.:12,0 t dimensions of the machine ca.:4,5 x 2,4 x 2,4 m EQUIPMENT: ? Fanuc 0i-TC control including manual guide 10.4 inch color display ? Fanuc main spindle and axis motors ? High-precision 12-position bloc-holder turret with direct holder ? Toolhol... more
6

Guillotines Edwards Direct drive Edwards Direct drive

Birmingham , United KingdomUnited Kingdom dealership location
5775 km
ready for operation (used)
Used guillotine / shear for sale EDWARDS PEARSON D.D 3000mm x 3.5mm mechanical Guillotine for sale Direct drive guillotine / reliable sheet metal cutting machine Model: Truecut Control programmable / Front operated back gauge Elgo electronics control Back stop / back gauge Rapid blade gap adjustment Squaring arms Front sheet support arms Rear infra-red safety guarding Roving foot switch Year 1999 Can be seen working Manufactured in England Ckxowtvy Current blades are in good condition however n... more
8

6-spindle rod machine Mori Say TM626

Illingen, GermanyGermany
6622 km
2009
excellent (used)
6-spindle rod machine Mori-Say TM626 - Built 2009 Specification - Six-spindle lathe TM626 - Including electrical exhaust (standard) - 1 spindle drum with HIRTH toothing - 1 tip mode for setting up - 1 Automatic central lubrication - 1 coolant device complete with pump (5 bar, 500 l/min) Container 1000 litres - 1 tool foray block - 6 independent longitudinal slides - 5 gear-tuned pinoles with fine adjustment - 4 cross sled Pos. 1; 2, 4 ; 5 - 2 radial slide Pos. 3, ... more
5
Welding current: 25 - 350 A Idle voltage: 16-40 V Mains frequency: 50-60 Hz Facilities: - according to EN 60974-1 Bffdzomgqu - Burner water-cooled Art. more
4

CNC Press Brakes EDWARDS PEARSON PR10/6 250 ton x 4000mm 6 axis CNC hydraulic Press Brake.

Leicestershire, United KingdomUnited Kingdom dealership location
5824 km
1997
ready for operation (used)
Serial No. 97P281 Control Cybelec DNC 800 Back gauge Programmable Guards infra red Capacity 250 ton x 4100 mm Maximum length of bend 4100 mm Between frames 3750 mm Daylight 400 mm Throat depth 400 mm Stroke length 265 mm Input 415/3/50 18.5 KW Tooling full length top tool and single vee. Fitted with rear and side guards and crowning. Be9vbuookj X=Back gauge in/out X Y=Beam rise & fall Y1, Y2 R=Fingers rise & fall R Z= Fingers left/right Z1, Z2 Length 4.6 m Width 2.9 m ( including pendant contro... more
2
Make BUEHLER, Type SDW-800/300, No 10208654, Material Mild steel, Three roll mill , Roll diameter 300mm, Roll width 800mm, Rolls placed inclined , Motor (+/- 45KW), Hydraulic roll adjustment , With hydraulic unit 1,0 KW, 220/380Volt, Rolls can be cooled , With inlet hopper 800x320mm, With scraper , With switch , Floorspace 2,0x1,5 M, Total height 1,4 M, Weight 2600 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready... more
5
Double grinding buck, double grinder, stand grinder, stand grinding buck, tool grinder -Engine power 0.45 kW -Speed 3000 U/min -max. grinding discs-200 mm -Operating voltage 380 volts Dimensions 475/530/H1205 mm -Weight 68 kg Nmt97 more
5

Guillotines Edwards dd shear Edwards dd shear

Birmingham , United KingdomUnited Kingdom dealership location
5775 km
ready for operation (used)
Used guillotine / shear for sale with non ferrous falling sheet support EDWARDS PEARSON D.D 2500mm x 3.5mm mechanical Guillotine for sale Direct drive guillotine / reliable sheet metal cutting machine Model: Truecut Control programmable / Front operated back gauge Datum Elgo control Back stop / back gauge Rapid blade gap adjustment Squaring arms G9hgbx Front sheet support arms Rear infra-red safety guarding Roving foot switch Year 1999 Can be seen working Manufactured in England Current blades ... more
5
Control system: FANUC Series O-T Travel distances: X: 160 mm Z: 540 mm Max swing: 450 mm Max turning diameter: 320 mm Max turning length: 500 mm Bar capacity: 51mm Spindle motor power: 15 kW Number of tool stations: 12 Nlvz9 Machine dimensions: 2360 x 1580 x 1710 mm Machine weight: 4250 kg Accessories: Chip conveyor Coolant tank more
5
Siemens 6FC5373-0AA01-0AA2 Sinumerik 840D SL CNC hardware NCU 730.2 PN version A , serial number according to photo, used, normal traces of use, 100% functional, supplied photos Crrarinc more
2
Serial No. 96-160-010 Control Swissax Tqhec2kr Back gauge programmable Guards "Sick" Capacity 150 ton x 3100 mm Maximum length of bend 3100 mm Between frames 2590 mm Daylight 300 mm Throat depth 300 mm Stroke length 150 mm Input 415/3/50 7.5 kw approx Actuated via wander type foot switch X=Back gauge in/out X Y=Beam rise & fall Y1, Y2 Length 11' 10" Width 6' Height 8' 6" Nett weight actual. 8,500 Kgs / 8.37 Tons more
2
Make Brabender Technologie, Type DDW-MD5-FW40/3plus-35, No 03035306893, New 2004, Material Stainless steel, Metering screw , With hopper (valbuis), Hopper sizes dia. 700mm to dia. 190mm, height 1,8m, Inlet dia. 200mm, Outlet dia. 150mm, With motor 0,55kW 230/400 Volt, Mounted on frame , Floorspace 1,4x0,8m, Total height 2,3m, Weight 350kg What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destinati... more
1
Rockwell sandwich panel saw Inhrjmh more
4

Folders Edwards Folder Edwards Folder

Birmingham , United KingdomUnited Kingdom dealership location
5775 km
ready for operation (used)
Used Edwards Box and pan folder Edwards Box and pan Folder Itgjmot Complete with segmented fingers Capacity: 1250 x 2mm more
1

DeWalt DeWalt

Lindesberg, SwedenSweden dealership location
6492 km
ready for operation (used)
Radial saw Bfagjsqbuf more
6
Siemens 6FC5373-0AA01-0AA2 Sinumerik CNC hardware NCU 730, serial number according to the photo, good condition, 100% needed, functional, included with com. photos W7o8debd more


dewalt dw ...
daily

New machines via email!

Stay updated!

to

to

Edit search
DEWALT DW 626
SELL IMMEDIATELY
with the world-wide market leader from 0,79 EUR per listing.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our app for used machines now!
Machineseeker app for iPhone and Android.