Used Dial Gauge for sale (2,101)

Condition: used, Year of construction: 1999, ja Hydraulische klemmung Ihodpfxow Syf Ao Ahyjt weight of the machine ca. 3,3 t t

Condition: used, Radial drilling machine with plate field WEBO type HRH 100 / 3000 Machine. No. 10009555/7 -- 1110185 -- 6046 Year of manufacture 1979 Drilling capacity Ø 100 mm in ST 60 at feed rate 0.5 mm/rev. Nominal throat depth 3000 mm Max. throat depth max. 3100 mm Spindle holder MK 6 Spindle speed 22.4 - 1600 rpm 36 steps Feed rate 0.05 - 2.5 mm/rev 18 steps Spindle - base plate distance 970 - 2335 mm Pinol stroke 325 mm Swivel range of the arm 360 movable on bed, bed length 7500 mm Ihedpfxjfbt Hus Ahyet Clamping area panel field 8000 x 2100 mm - Electrical central clamping - Drilling unit can be moved lengthwise on the machine bed by electric motor - Panel field consisting of 2 clamping plates with 7x T-slot, (length 4000 x width 2100 x panel thickness 360 mm) Space requirement L x W x H 8000 x 4550 x 4300 mm Maximum height 4300 mm Transport height (bed with drilling machine) approx. 3150 mm Transport weight (bed with drilling machine) approx. 20 tons Transport dimensions of panel section L x W x H 4000 x 2100 x 900 mm (2 panels stacked on top of each other) Transport weight panel field approx. 14 ton. good condition

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition Isdpfx Ahelhwr Reyeht

Condition: excellent (used), Siemens Simodrive radial blower Type 6 SN 1162-OBA02.OAAO Ihodpefuv Tfjfx Ahyst

Condition: used, Year of construction: 1970, 150 mm 500 mm weight of the machine ca. 0,75 t Ihedpfxegvi I Hj Ahyot +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), WMW BR 40/2 x 1250 radial drilling machine Drilling capacity in steel (diameter): 60 mm Arm reach: 1250 mm Ihodpfx Ahsx U Ecteyst Max. workpiece height: 820 mm Spindle speed: 20-1200 rpm Spindle taper: MK 5 Spindle stroke: 400 mm Feed rate: 0.063-0.63 m/min Vertical arm adjustment: 950 mm Electrical connection: 380 / 50 V / Hz Clamping surface of base plate: 1400x800 mm Total power requirement: 5 kW Machine weight approx.: 3 t Floor space required approx.: 2.2 x 1.0 x 2.8 m

Condition: new, The KNUTH R 60 V is a powerful and versatile radial drilling machine designed for exceptional drilling, reaming, and countersinking in steel or cast iron, making it a preferred choice among professionals in production and construction companies. This robust machine features a premium construction with a large column and a highly torsion-resistant boom, ensuring maximum rigidity and minimal clamping offset. With its motorized boom height adjustment and oil-bath lifting gears, operators experience smooth handling, even with large and heavy workpieces. Additional highlights include infinitely variable spindle speeds with a digital display and an integrated coolant system, ensuring reliability and cost-effectiveness. The R 60 V, part of the renowned Radial Drilling Machines group, stands out for its modern design and user-friendly operation. Contact us to request a quote and elevate your drilling capabilities with KNUTH’s exceptional machinery. Ihjdpsuyic Hsfx Ahyot

Condition: used, Technical details: bore capacity in steel (diameter): 50 mm arm length: 360-1600 mm workpiece height max.: 320-1220 mm spindle stroke: 315 mm spindle taper: MK 5 bore spindle turning speeds : 25-2000 U/min spindle speed levels: 16 table clamping surface:: 630 x 500 x 500 mm total power requirement: 4 kW dimensions of the machine ca.: 2600 x 1120 x 2600 mm weight of the machine ca.: 3,5 t 1 pc. radial drilling machine Z3050 x 16/2- Tradefair demonstration machine/NEW Special features: - Sturdy cast iron body - Cube table - Gearbox with hardened and ground gears in an oil bath - Thread cutting via spindle reversal - Hardened and ground heavy column - Right-left rotation - Drilling depth limitation - High spindle torque - Feed overload clutch Isdpfx Ahswutvhsysht - Quiet operation - Hydraulic, switched feed and spindle gear with preselection - Hydraulic clamping of the stop, column, and drill head *

Condition: excellent (used), Catalogue number: 7866 TECHNICAL DATA - Max. blade diameter: 300mm - Blade bore diameter: 30mm Ihodpsx U Tymefx Ahyjt - Blade guard - Cutting height with installed blade: 250mm, 60mm - Max. cutting width: 600mm - Ability to cut at an angle in the vertical plane – arm or blade movement - Arm rotation left/right - Motor: 3kW - Table size: 1130x1010mm - Extraction port diameter: 50mm - Dimensions (LxWxH): 1150x1190x1510mm - Weight: 220kg ADVANTAGES – Italian-made – Not repainted – DTR technical documentation – Very good condition – Used saw Net price: 6,500 PLN Net price: 1,550 EUR (based on an exchange rate of 4.2 PLN/EUR) (Prices may change subject to exchange rate fluctuations)

Condition: good (used), Table size: - horizontal: 500 x 600 mm - vertical: 310 x 600 mm Tiltable: 90° Iodpfod Tticsx Ahyjht Dimensions LxWxH, approx.: 700 x 520 x 520 mm Weight, approx.: 280 kg Item no.: WW12214

Condition: excellent (used), Year of construction: 2004, drilling capacity: 32 mm, column diameter: 200 mm, Heidenhain RADIAL ND 1200 R ; HeidenHain scales Ihedpfxex S H Nvo Ahyot HeidenHain measuring probe for: Rectangle target pattern Frame target pattern Circle target pattern  Line target pattern Arm Length: 1000mm Max. drill Ø cast: 32mm Max. tap Ø: 30M Stroke pinole: 240mm Max. distance spindle - table:860mm Min. distance spindle - table:320mm Floor / table area: 1370 x 700mm Speeds / ranges: 1220Rpm Spindle Taper: 4ISO/Bt/Mk Throat: 1000mm Column sleeve: 200mm Quill Ø: 50mm Length: 1400mm Width: 720mm Height: 1900mm Weight: 1200kg

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 (MK 4) • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting attachment • Two 18 mm T-slots each on rear and left of machine base • 3-axis digital readout • Machine lamp • Central lubrication Ihodpfx Ahsx Uwpxeyst • Table top machined all around • Drill guard • Coolant system Dimensions and Travels Tool holder MK 4 Column diameter mm 195 Table size mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column travel mm 450 Distance spindle nose - table top min 40 mm, max 710 mm Distance spindle nose - base plate min 840 mm, max 1510 mm Drilling radius min 540 mm, max 1590 mm Work table height mm 900 Machining Capacities Drilling capacity (solid) St 60 ⌀ 45 mm GG 22 ⌀ 55 mm Tapping St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range min⁻¹ 15 – 2,800 Torque Nm max. 250 Constant from min⁻¹ 15 – 200 Feed Drives Feed, stepless mm/rev 0.02 – 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with table 750 x 1200 mm kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic system diagram Electrical wiring diagram

Condition: excellent (used), Year of construction: 1994, Arm Length: 1600mm Max. drill Ø cast: 60mm Max. tap Ø: 42M Stroke pinole: 310mm Max. distance spindle - table:1505mm Min. distance spindle - table:320mm Floor / table area: 1470x986mm Speeds / ranges: 2500Rpm Spindle Taper: 6ISO/Bt/Mk Quill Ø: 55mm Power: 4kW Iedpex Sx D Sofx Ahysht Length: 2900mm Width: 1200mm Height: 3200mm Weight: 4700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2003, Model: G50 x 1600 Year: 2003 Radius of Arm: 1600mm Ijdpfx Ajxphw Tohyoht Spindle Taper: MT5 Spindle Speeds: 25 – 2000 RPM Max. drilling capacity: 75mm iron / 50mm steel

Condition: used, Year of construction: 2000, bore capacity in steel (diameter) 32 mm arm length 1000 mm table surface area 1055 x 500 mm taper MK 4 feed - independent 0,075-0,3 mm/U turning speeds 45- 2240 U/min Ihodox Sy U Sepfx Ahyot total power requirement 4,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 2450 x 1300 x 2300 m

Condition: new, The R 32 Basic is a robust radial drilling machine ideal for those entering the world of Radial Drilling Machines, offering an exceptional drilling capacity of 32 mm (1.26 in) and a throat depth ranging from 320 to 820 mm. This model, part of the renowned R Basic series, features manually switched gears and manual clamps, ensuring ease of use while maintaining a stable and reliable performance suitable for various applications, including workshops and steel construction. Built from high-quality fine-grain cast iron with heavy ribbing, the machine minimizes vibrations, enhancing operational precision with its precision-ground gears. It includes a standard cube table for handling smaller workpieces, making the R 32 Basic a powerful addition to your workshop. Equipped with features such as motorized arm height adjustment and mechanical clamping for important components, this radial drilling machine is designed for your operational needs. Buy now to experience the efficiency of the R 32 Basic, a standout in the Radial Drilling Machines product group. Ihedpfeu E Hzkox Ahyjt

Condition: new, The R 40 V is a powerful radial drilling machine from KNUTH, part of our renowned Radial Drilling Machines category. This precision tool excels at drilling, reaming, and countersinking in steel or cast iron, making it ideal for various industrial applications. With a robust and versatile design, the R 40 V features a premium, high-quality cast base and column, alongside a torsion-resistant boom that allows easy handling of large workpieces. It boasts a 40 mm drilling capacity and a large throat depth of 300 to 1,300 mm, ensuring high accuracy and efficiency even in demanding environments. The machine is equipped with an infinitely variable spindle speed control and a powerful coolant system, facilitating smooth operation and minimizing wear. Operators will appreciate the user-friendly controls and the modern design that enhances comfort. Trust the R 40 V for reliable performance in your production needs. To learn more or request a quote, explore our Radial Drilling Machines product group today. Isdpfx Ahoqc S Ivsyjht

Condition: as good as new (ex-display), Year of construction: 2021, bore capacity in steel (diameter) 40 mm arm length 370 - 950 mm workpiece height max. -- mm turning speeds 50 - 316 / 316 - 2000 U/min spindle taper MK 4 tread diameter max. M30 boring head -90° bis +90° schwenkbar quill stroke 200 mm feed (6) 0,08 - 0,50 mm/U distance spindle /table 390 - 780 mm T-slots 18 mm column diameter 220 mm total power requirement 2,2 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 2,45 x 1,2 x 2,72 m Very good condition * Electromotive height adjustment of the drill head without adjustment the drilling position, ideal for deep hole drilling * Drill head can be swiveled 180°, boom can be moved back and forth and horizontally pivotable * Thread cutting device and 6 automatic drilling feeds Ijdpfx Aexwdvbohyoht * Large table surface (1195 x 500 mm) for simultaneous clamping several workpieces * Digital speed and drilling depth display * Quickly adjust the drill head to the workpiece and clamp it hydraulic * with electronically stepless speed control * User-friendly operation via membrane keyboard Scope of delivery: Thread cutting device LED machine light Coolant device Height-adjustable protective cover Electromagnetic spindle feed Digital speed display Digital drilling depth display Electromotive drill head adjustment

Condition: used, Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation fan, exhaust gas extraction, radial duct fan -Manufacturer: Maico, radial tube fan type ERR 12/1 -Voltage: 220V -Power: 62 W -Protection class: Iso-Kl.B G 42 -Connection input: Ø 120 mm -Connection output: Ø 125 mm Iodjttnuwspfx Ahyeht -Fan wheel: Ø 330 x 170 mm -Dimensions: 420/270/H250mm -Weight: 3.5 kg/piece

Condition: good (used), Ventilator, fan, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, smoke gas fan, ventilation fan, exhaust gas extraction Iodpfx Ahoqpl Rxoyeht -Manufacturer: Ziehl-Abegg, radial fan type DKHR 280-2 -Speed: 2800 rpm -Power: 0.4 kW -Protection class: IP 44 -Quantity: 1 piece available -Dimensions: Ø 280 x 175 mm -Weight: 8.5 kg

Condition: used, Fan, fan, electric motor, blower, blower, centrifugal fan, emergency exhaust fan, flue gas fan, ventilation fan, exhaust gas extraction -Manufacturer: ebmpapst, radial fan type R2E133-BH66-25 -Voltage: 230V -Speed: 2800 rpm Ihedpfx Ahomiqntsyjt -Power: 24 W -Dimensions: 205/70/H185 mm -Weight: 1.2 kg

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev Ihodpfx Aoirax Uohyet -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

Condition: used, Three-phase motor, electric motor -Manufacturer: Elektror, electric motor for radial fan type D-06 / S484 -Power: 0.5 kW -Speed: 2800 rpm -Shaft: Ø 14 x 35 mm -Protection class: B TROP -Dimensions: 295/200/H150mm -Weight: 6.5 kg Iedpfsupbc Ajx Ahyjht

Condition: used, Radial fan, high pressure radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower -Manufacturer: ebm, radial fan extraction fan Ihsdotxkwpepfx Ahyst -Type: unfortunately without type designation -Voltage: 220V -Speed: 1080 rpm -Inlet: Ø 190 mm -Air duct connection: 285 x 145 mm -Number: 2x blowers available -Price per piece -Dimensions: 360/320/H375mm -Weight: 12 kg/piece

Condition: used, Fan, fan, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan -Manufacturer: Ziehl-Abegg, radial fan motor without fan wheel -Type: MK205-UDK.30.N -Speed: 950/480 rpm -Power: 0.66 kW Iodpsucmm Sofx Ahyjht -Protection class: IP 54 -Number: 1 piece -Dimension: Ø 368 x 330 mm -Weight: 64 kg