Used Gauge for sale (1,885)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 8444-08, workpiece length (max.): 6,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum edge length: 6,000 mm Maximum material thickness: 1.25 mm Mechanical cutting device Hydraulic unit Flow rate of gear pump: 14.5 l/min Operating pressure: 140 bar Maximum pressure: 210 bar Electric motor power: 3 kW Motor speed: 1,450 rpm Voltage: 380 V Frequency: 50 Hz Oil tank capacity: 30 l Pressure gauge diameter: 63 mm Pressure gauge display range: 0–250 bar Pressure switch: 90 bar Hydraulic components Gear pump CPL 9 DQ Intermediate flange L25-2/004 Elastic coupling G 228/2P Return filter Fill and vent filter Oil level indicator Drain plug Glycerine pressure gauge Valve block with pressure, flow control, braking, and solenoid valves Hydraulic cylinders Number of hydraulic cylinders: 8 Type: GHZ-50 × 225-S spec. Piston rod with external thread M20 Length: 20 mm Swivel bearing at the rear Hydraulic motors Number of hydraulic motors: 4 Type: OMP 50 MACHINE DETAILS Control system Electrical machine control with operator panel (OP) Adjustable dwell times, angle ranges, and shutdown delays Variant control for different machine functions EPROM-based control Electrical supply Mains voltage: 380 V Frequency: 50 Hz EQUIPMENT Hydraulic unit OP-14 SM 8 hydraulic cylinders GHZ-50 × 225-S spec. 4 hydraulic motors OMP 50 Gear pump CPL 9 DQ Valve block with hydraulic valves Ndodpfxszy Ndcs Afusb Return filter Fill and vent filter Oil level indicator Glycerine pressure gauge Pressure switch Electrical OP control Hydraulic and electrical circuit diagrams

Condition: excellent (used), HELMUT FISCHER X-ray fluorescence measuring device / film thickness measuring device FISCHERSCOPE X-RAY XDL-XYZpT8 Professional X-ray fluorescence measuring system for film thickness and material analysis For sale is a used X-ray fluorescence measuring device from the manufacturer Helmut Fischer GmbH + Co. KG, Germany. The FISCHERSCOPE X-RAY is suitable for non-destructive film thickness measurement and material analysis using X-ray fluorescence (XRF). The system is designed for measurements of functional layers, anti-corrosion layers, and various metallic coatings, and is used in quality assurance, laboratories, research, and manufacturing. Technical data: Manufacturer: Helmut Fischer GmbH + Co. KG Model: FISCHERSCOPE X-RAY Type: XDL-XYZpT8 Serial number: SN010002436 Made in Germany CE marking present Measuring system: X-ray fluorescence measuring device (XRF) For non-destructive film thickness measurement Suitable for functional layers and anti-corrosion layers Large measuring chamber with C-shaped slit Standard X-ray tube Proportional counter Fixed aperture and fixed filter DCM travel 0–80 mm Electrical data: Supply voltage: 230 V AC Frequency: 50–60 Hz Power consumption: 120 W Connections: Power connection Serial interface (Sub-D) Other connections as shown in the pictures Equipment: Helmut Fischer FISCHERSCOPE X-RAY measuring device Measuring chamber with protective cover Software Operating manual Additional accessories as shown in the pictures Areas of application: Film thickness measurement Material analysis X-ray fluorescence analysis (XRF) Quality assurance Electroplating Surface technology Material testing Laboratory Research and development Scope of supply: Helmut Fischer FISCHERSCOPE X-RAY XDL-XYZpT8 Software Operating manual Scope of supply as shown in the pictures Condition: Used The device comes from a warehouse clearance. Optical condition as shown in the pictures. Important note: The device has not been tested by us and is sold explicitly as is and without warranty. The table shown in the photos, as well as other items not explicitly mentioned, are not part of the sale. Ndjdpfx Afoz Egi Reujb Due to its size and weight, shipping can be arranged via a freight forwarder. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: not inspected (used), Year of construction: 1993, Number of spindles 6 St. Ndjdpozz Ai Uofx Afusb Working width 230 mm Working height 160 mm Feed motor 4 kW Dimensions (L/W/H) 4400 x 1800 x 1500 mm WEINIG Unimat 23 Automatic Planing and Grooving Machine For sale on behalf of a customer ----- Manufacturer’s Technical Specifications: Working width: 20–230 mm Working height: 6–160 mm Number of spindles: 6 Motor power per spindle: 5.5 kW (7.5 PS) Feed motor power: 4.0 kW (5.5 PS) Spindle speed: 6,000 rpm ----- ----- Planing table length: 2 m 1 adjustment gauge 2 planing heads, 240 mm 3 brake units are defective; these could be reinstalled by an electrician. ----- Additional technical data (former order confirmation) attached ----- Price of the above-mentioned machine upon request! ----- (Technical specifications according to the manufacturer—not guaranteed!) All prices listed are net, plus applicable sales tax.

Condition: used, Year of construction: 2021, functionality: fully functional, CMS 530 ki Multi Gauge-Type 816 000 E3,5.2 - 3 System - 50" - 20 Yarn 26 units available for this model Nsdpfx Afeyaypdeuodb

Condition: used, functionality: fully functional, machine/vehicle number: 34554, Mayer & Cie. RELANIT S single-jersey circular knitting machine. Mayer & Cie. single-jersey circular knitting machine, model RELANIT S, machine number 34554. Manufactured in Germany. NAMEPLATE DATA Nominal diameter: 762 mm / 30 inches Gauge: 28 E Njdpfx Afszvhx Roujdb Pitch: 0.91 mm Number of needles: 2,664 Manufacturer: Mayer & Cie. Maschinenfabrik, Emil-Mayer-Straße 10, Albstadt (Germany) The nameplate indicates “Made in Western Germany” APPLICATION Single-jersey fabric in fine gauge, suitable for shirts, underwear, nightwear, lightweight outerwear, and fine technical fabrics. RELANIT TECHNOLOGY Relative motion cam system, which reduces friction, extends needle life, and reduces yarn tension. INSTALLED EQUIPMENT REIVAX DC-3 electronic defect detector (Taube, Mataró), with sensitivity, current, defect, needle stroke, memory, stop, and reset warnings. OLI-FOX lubricator (Talleres Guerra, Mataró). Analog control panel with A / B / C revolution display. Autonics FX4S counter. Complete upper rail installed on the machine. CONDITION Complete and assembled machine. It does not need to be disassembled to be removed from the warehouse. Currently, fabric from the last production run is still in the machine. A visit can be arranged for an on-site inspection and operational test. YEAR Approximately 1990, based on the serial number and the nameplate. CE MARKING The machine does not have CE marking. For its commissioning within the European Union, the buyer must carry out the corresponding conformity assessment and, if necessary, the required adaptations. DIMENSIONS AND TRANSPORT Approximate dimensions: Length: 2.70 m Width: 2.00 m Height: 2.70 m Disassembly: No disassembly required Location: Albacete, Spain

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: DN-ELV3200KG, Kone crane, overhead crane, bridge crane, industrial crane Hoisting mechanism with 0.3 full load hours = only 7 operating hours on the meter!!!!! Load capacity / lifting capacity 3.2t - 3,200KG Gauge 13600mm, overall dimension approx. 13800mm Year of manufacture 2000 Lifting height 6m Overall height from top of crane to hook approx. 1050mm Head beam length with buffer approx. 2450mm With floor control Crane is disassembled and immediately available Very good condition, see pictures Column-mounted swivel cranes and wall-mounted swivel cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping via freight forwarder is possible, please inquire with your postal code. Collection preferred. Ndjdpfx Afszv Du Iouob

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, power: 37 kW (50.31 HP), input voltage: 380 V, input current: 80 A, input frequency: 50 Hz, pressing force: 220 t, stroke length: 200 mm, operating speed: 21 mm/s, reverse speed: 200 mm/s, table width: 120 mm, table length: 4,270 mm, table height: 900 mm, throat depth: 400 mm, ram plate length: 4,270 mm, distance table to ram: 400 mm, clearance between the columns: 3,820 mm, oil tank capacity: 350 l, total length: 5,370 mm, total width: 2,160 mm, total height: 3,275 mm, overall weight: 16,950 kg, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic press brake LVD EASYFORM-10 220/4270 Touch-B Year of manufacture: 2010 Serial number: 33189 Technical specifications Force: 2200kN Working length: 4270mm Distance between uprights: 3820mm Stroke: 200mm Distance table – ram: 400mm Gap: 400mm Turbo: PP5400 Approach speed: 120mm/s Working speed: 21mm/s Return speed: 200mm/s Weight: 16950 kg Motor: 37kW Oil capacity: 350 COMMAND CONTROL TOUCH-B • Table PP8170 V-axis • EFL 90/130 • Top tool clamping PP3090 – Wila Ndodpfez Eqwlox Afujb • Back gauge X600 X’ R Z1 Z2 PP8096 • Safety: CE PP3580 – laser-safe • PP1115 manual front support: 2pcs • T-axis Heavy duty 200kg

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, machine/vehicle number: EM263 - IS4091, Steel crane, overhead crane, bridge crane, workshop crane Payload / lifting capacity 6.3 t - 6300 kg Gauge 11,390 mm, overall dimension approx. 11,550 mm TYPE EL-C 63 - 11.205 E Year of manufacture 1996 Njdpfezv H Ecsx Afuedb Lifting height 6 m Overall height from top of crane to hook approx. 950 mm Head girder length with buffer approx. 2180 mm With floor-mounted control Crane is disassembled and immediately available Very good condition, see pictures Column-mounted swivel cranes and wall-mounted swivel cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder is possible, please inquire with your postal code Collection preferred

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, machine/vehicle number: EM196 - IS4095, Steel crane, overhead crane, gantry crane, indoor crane Load capacity / lifting capacity: 5t - 5000KG Track gauge: 11,390mm, overall dimensions approx. 11,550mm TYPE EL-C 50 11,390 E Year of manufacture: 2001 Lifting height: 6m Overall height from top of crane to hook: approx. 900mm Nsdpjzv H Anofx Afujdb Head beam length with buffer: approx. 2290mm With floor-mounted control Crane is dismantled and immediately available Very good condition, see pictures Column-mounted slewing cranes and wall-mounted slewing cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder is possible, please inquire with your postal code. Collection preferred.

Condition: refurbished (used), Year of construction: 2013, operating hours: 50 h, functionality: fully functional, workpiece weight (max.): 500 kg, table diameter: 450 mm, total length: 7,200 mm, gear diameter: 500 mm, total height: 3,300 mm, total width: 4,500 mm, input frequency: 50 Hz, type of input current: three-phase, milling length: 240 mm, spindle speed (max.): 450 rpm, table bore: 125 mm, spindle speed (min.): 100 rpm, travel distance X-axis: 325 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, overall weight: 16,800 kg, distance table to spindle center: 710 mm, controller manufacturer: Siemens Sinumerik 840D sl, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, A Pfauter PE 500 for the economical production of straight and helical spur gears up to module 12 and 500 mm in diameter – completely overhauled by SerWeMa with Siemens Sinumerik 840D sl, equipped with a gripper unit and a 32-position workpiece storage for unmanned operation. The machine is ready for operation in our hall in Chemnitz: you can inspect it under power, and if desired, we will mill your own sample part and you can take delivery of the machine here. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul and knows the machine inside out. The general overhaul included complete geometric overhaul by grinding and scraping, new roller bearings in the main drive and in the milling head, measuring and reconditioning the worm gear, overhauled or new ball screw drives, overhaul of hydraulics, lubrication and coolant system, and new electrical equipment with Sinumerik 840D sl, Sinamics S120 and new axis motors. An electronic generating gear controls all generating and single-part machining processes, and an NC-controlled crash recovery protects the tool and workpiece in the event of a power or phase failure. New paint in RAL 7035/5015 with oil and coolant resistant two-component paint, acceptance of geometry according to SerWeMa protocol based on DIN ISO 6545. The machine controls six CNC axes: X radial, Y tangential, Z axial, A milling head swivel, B milling cutter drive and C table drive. The SerWeMa gear cutting software guides you through workpiece and tool data via masks, without the need for programming: up to three position-oriented gearings per workpiece, each with its own tool, up to three cuts per gearing with simultaneous or counter-rotating movement, form corrections for convex, conical and convex-conical profiles, lead-in and lead-out phase correction, chamfer milling, dimension correction via tooth width, two-roll or two-ball gauge, measuring stop, shift strategy with defect management per generating cutter and cutting force monitoring with automatic retraction. Technologies: generating milling, single-part milling and worm gear milling both radially and tangentially. A hand-held device with a handwheel allows setup directly in the working area. Technical data: max. workpiece Ø 500 mm, max. module 12, max. milling cutter Ø 200 mm, max. milling cutter length 240 mm, shift travel 200 mm, milling cutter speed 100–450 rpm, swivel angle +25°/−45°, travel radial 325 mm (axis distance 25–350 mm), travel axial 400 mm (310–710 mm), table diameter 450 mm, table bore 125 mm, connection power approx. 60 kVA. Installation dimensions incl. automation approx. 7.2 × 4.5 × 3.3 m, weight approx. 16.8 t. Nedpfxez Et E Es Afuedb Equipment: machine enclosure, chip conveyor, gripper unit with two grippers, workpiece storage with 32 positions, preparation for emission extraction (150 mm nozzle, Harting connector on the machine roof). Documentation complete in German: operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagrams. Serwema optionally offers: trial part milling in our factory, additional milling arbors, assembly and commissioning at your location, operator training and a control system upgrade to Sinumerik ONE. Spare parts and service come from a single source, worldwide, even after the purchase.

Condition: used, Year of construction: 2021, functionality: fully functional, CMS 520 ki C Multi Gauge-Type 818 000 C E1,5.2, 2 System - 50'' - 12 Yarn) 48 units available for this model Ndedpfx Aeyaqt Hjfuob

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 29,943 h, machine/vehicle number: 220495, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller model: POS 2000, working width: 3,020 mm, lower beam adjustment: 250 mm, folding beam adjustment: 80 mm, sheet thickness (max.): 4 mm, sheet thickness stainless steel (max.): 2 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, overall weight: 4,230 kg, total length: 4,275 mm, total width: 805 mm, total height: 1,425 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, year of last overhaul: 2025, Equipment: documentation/manual, emergency stop, foot remote control, SCHRODER MAK3 3000x4.0 Mechanical Press Brake Year of manufacture: 2013 Capacity: 400N/mm2, 4mm CNC control: POS2000 Back gauge: 10-1000mm Work table: 3200mm, U-shaped Machine serviced by the manufacturer's service department Machine is in good working order and has been in continuous use Nodpfx Afezkgz Heujdb Machine is being sold due to a change in the machine park Touchscreen display is not functioning, control via mouse only

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1969, machine/vehicle number: HS 205-4, sheet thickness (max.): 4 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 2 mm, table height: 900 mm, back gauge: 1,000 mm, input voltage: 380 V, input frequency: 50 Hz, operating pressure: 175 bar, overall weight: 2,500 kg, total length: 2,600 mm, total width: 1,950 mm, total height: 1,400 mm, Equipment: emergency stop, foot remote control, A Wila brand plate shear in very good condition. It is comparable to the Safan brand. The machine is somewhat older. The back gauge moves very smoothly, but currently needs to be adjusted manually. It does not have a drive mechanism. Njdpfxez Dgttj Afusdb

Condition: excellent (used), Measuring gauge Manufacturer: Micro-Maag Model: B2 40-100 Stock number: (28690) Measuring range: 40 - 100 mm in 2 mm steps per test gauge 1 test gauge DM 74-76 mm is missing Very precise measurements possible, as measurement is taken at 6 points. Ndodpfx Afsy Ipbmeuob Measuring depth approx. 800 mm Transport case dimensions: Width: 505 mm Depth: 340 mm Height: 260 mm Weight: 29 kg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, power: 9 kW (12.24 HP), input voltage: 380 V, pressing force: 100 t, stroke length: 300 mm, operating speed: 9 mm/s, reverse speed: 71 mm/s, table width: 90 mm, table height: 900 mm, throat depth: 520 mm, ram plate length: 3,060 mm, distance table to ram: 500 mm, clearance between the columns: 2,620 mm, oil tank capacity: 200 l, total length: 4,220 mm, total width: 2,335 mm, total height: 3,010 mm, overall weight: 10,500 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, safety light barrier, CNC Press Brake COLLY BOMBLED PS 3000 LS 100/3 – 100 tons x 3,060 mm – 8 axes – DELEM DA66W We are offering this CNC press brake from COLLY BOMBLED for sale due to an upgrade of our machine park. This is our own production machine. We are a metalworking company and not a machine tool reseller. The machine is in very good working condition, has been regularly maintained, and has seen little use for its age, with only approximately 220,000 bends recorded. The machine can be viewed and tested in operation at our workshop in France. MAIN FEATURES Manufacturer: COLLY BOMBLED Model: PS 3000 LS 100/3 Year: 2008 Serial number: 085049 Pressing force: 1,000 kN / 100 tons Bending length: 3,060 mm Distance between uprights: 2,620 mm CNC control: DELEM DA66W 2D graphical Number of axes: 8 Number of bends: approximately 220,000 8-AXIS CONFIGURATION Y1 – Y2 X1 – X2 R1 – R2 Z1 – Z2 Motorized COLLY S3001 back gauge. CNC CONTROL DELEM DA66W with 2D graphical interface. Graphical programming of parts and bending sequences, axis management, bending table function, and visualization of bending operations. CONDITION / MAINTENANCE Machine regularly maintained. Hydraulic overhaul recently performed. Inspection and maintenance performed directly by COLLY BOMBLED. All guards and safety equipment are present. Machine is fully functional and available immediately. The sale is solely motivated by an upgrade of our machine park. TECHNICAL DATA Slide stroke: 300 mm Ndsdpfszybffjx Afueb Gooseneck: 520 mm Table / slide opening: 500 mm Table width: 90 mm Table height: 900 mm Approach speed: 100 mm/s Bending speed: 9.2 mm/s Return speed: 71 mm/s Motor power: 9 kW Approximate capacity for S235 steel over the entire length with V = 10 x thickness: 5 mm. DIMENSIONS / WEIGHT Height: 3,010 mm Width: 2,335 mm Length: 4,220 mm Weight: approximately 10,500 kg LOCATION / LOADING Machine located in our Metal360 workshop in France. Machine can be viewed and tested in operation by appointment. The building allows for lifting and loading the machine directly onto the truck, which facilitates its removal. Operating video and additional photos available upon request. Price: €34,900 (excluding VAT) Machine available immediately.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, working width 2700 mm working height 100 mm hydraulic cutting gauge adjustment to size cast body power supply 400V 3000 kg Ndjdpfx Afsz Ehqcsueb Year of manufacture 2004

Condition: used, Approximately 225 used gauge pins from various manufacturers, applicable for measuring/testing bores to determine maximum and minimum dimensions, with a good side and a reject side. Njdpfxszz I Txe Afuodb 1-piece. Includes, among others, thread gauge pins made of tool steel, DIN 7162, H7, H6, H5 for measuring length, diameter, and bore. Manufacturers: Saliger, Hommel, HK, Blome, and FerTer. Price upon request. All technical specifications are subject to typographical errors and inaccuracies. Sales exclusively to countries within the EU.

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: CR2344, ABUS crane system, overhead crane, gantry crane, workshop crane Load capacity / lifting capacity: 2t - 2000 kg Track gauge: approx. 14,000 mm, overall dimensions: approx. 14,200 mm Year of manufacture: 2008 (rebuilt with new chain hoist, floor control, cable track and drive units) Abus GM chain hoist, 2000 kg lifting capacity, 6 m lifting height Overall height from top of crane to hook: approx. 950 mm Head beam length with buffer: approx. 220 cm Ndodpfozgbypjx Afuob Crane is disassembled and available immediately Very good condition, inspection certificate is available We also have pillar-mounted swivel cranes and wall-mounted swivel cranes available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder is possible; please inquire using your postal code. Collection is preferred.

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, machine/vehicle number: CR2340 89/221260, Demag ELKE bridge crane, overhead crane, crane, crane system, crane runway Payload / lifting capacity: 3.2 - 3200 kg Track gauge: approx. 14,000 mm, overall width: approx. 14,200 mm With floor control and fine positioning Demag PLV168 wire rope hoist, 3200 kg Ndjdozf Uphspfx Afuob Lifting height: 6 m Overall height from top of crane to hook: approx. 1100 mm Head beam length with buffer: approx. 220 cm Crane is dismantled and immediately available Good used condition We also have pillar-mounted jib cranes and wall-mounted jib cranes available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder is possible, please inquire with your postal code. Pickup is preferred.

Condition: excellent (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: CR2431 90-240381, Demag ELKE bridge crane, overhead crane, crane, crane gantry, crane runway Load capacity / lever load: 3.2 - 3200 kg Gauge: approx. 12,200 m, overall width: approx. 12,400 mm with floor control and fine positioning Demag DH hoist 3200 kg Lifting height: 6 m Nodpfx Aozf Upbjfuodb Overall height from top of crane to hook: approx. 1050 mm Head beam length with buffer: approx. 220 cm Crane is disassembled and immediately available. Good used condition. Column-mounted swivel cranes and wall-mounted swivel cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping by freight forwarder is possible, please inquire with your postal code. Collection preferred.

Condition: good (used), functionality: fully functional, Year of construction: 2013, Used 3-meter plate shearing machine by Durma Type: SBF 3006 Capacity: 3100 x 6 mm Electric back gauge Ndjdpfxjz Ernro Afuob Year of manufacture: 2013

Condition: used, Year of construction: 1993, functionality: fully functional, machine/vehicle number: 226-7342, working width: 210 mm, spindle diameter: 40 mm, overall weight: 2,400 kg, power of feed motor: 2,200 W, spindle speed (max.): 6,000 rpm, workpiece height (max.): 120 mm, workpiece width (max.): 220 mm, input voltage: 380 V, number of spindles: 6, input frequency: 50 Hz, Equipment: motor brake, Selling a Weinig Profimat 22N with ATS control system. Lightly used, in good condition, fully functional. Spindle upgraded from 5.5 kW to 11 kW (2007). Includes Weinig precision adjustment gauge. Accessories included, see photos. Nsdpfx Afjz D Hp Uouodb Forklift available for loading. If interested, a video of the machine in operation can be sent.

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, machine/vehicle number: NOH336-41, ABUS ELV overhead crane, crane runway, bridge crane, workshop crane Load capacity / lifting capacity: 5t - 5000kg Span: 12,990 mm, outer dimension approx. 13,250 mm Year of manufacture: 2005 with radio remote control Lifting height: 6 m Construction height (top of crane to hook): approx. 850 mm Main girder length incl. buffers: approx. 260 cm Crane is dismantled and immediately available Nsdpfx Afjx Azrdousdb Very good condition, inspection logbook available Column-mounted and wall-mounted slewing cranes also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by forwarding agent possible, please inquire with postcode Collection preferred

Condition: ready for operation (used), Year of construction: 2005, Available immediately ex-works: Hydraulic plate shear Baykal Ndsdpfx Afsz En R Ajueb Type MGH 3100/10 Year of manufacture 2005 CNC control Delem Dac 310 Cutting length 3060 mm Material thickness 10 mm Controlled back gauge 1000 mm Drive power 22 kW Strokes/min 12 Weight 9600 kg Dimensions 5000/2600/2000 mm Price: Euro 9,500.00 plus VAT ex-works.

Condition: good (used), Year of construction: 2000, operating hours: 40,000 h, functionality: fully functional, track width: 3,000 mm, Equipment: crane, low noise, BZH sorting and cutting trolley. Track gauge: 3m. OBX 2 crane. Lifting capacity at 13.20m: 2200kg without grapple. Chainsaw on the right side. Crane positioned in front of the cab. Ndodpfezycf Tjx Afuob Grapple. Sold separately.