Used Direct Sowing Machine for sale (66,362)

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 355 x 305 x 455mm, Table 457 x 381mm, Spindle speed 50 – 6000 rpm, Spindle taper BT30, Spindle Motor 3Hp, Prototrak TMX Control, 8 Station ATC, Crsdpfx Akoz St Hwo Aoi coolant, Low Volt light.

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1020 x 610 x 620mm, Table size 1200mm x 600mm, spindle speed 12000rpm, spindle motor power 14.7kW, Siemens 840DSL control with Shopmill, 43M/min rapids, Crsdpez Eh Nlofx Ak Aoi Spindle taper BT40, 30 station ATC, through spindle coolant, swarf conveyor.

Condition: excellent (used), Year of construction: 2008, operating hours: 2,483 h, functionality: fully functional, machine/vehicle number: 8015, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,200 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 600 mm Rapid traverse rate X/Y: 30 m/min Rapid traverse rate Z: 24 m/min Table size: 1,300 × 600 mm Spindle speed: 50–12,000 rpm Spindle power: 21 / 15 kW Tool holder: BT40 Spindle drive: direct drive Tool positions: 40 Tool change time: approx. 4 s Tool changer: dual gripper MACHINE DETAILS Coolant pressure: 20 bar CNC control: Heidenhain iTNC 530 Screen diagonal: 15 inches Operating voltage: 400 V Connected power: 25 kVA Mains frequency: 50/60 Hz Number of phases: 3 Crsdpfx Aj Aggibok Aji Machine weight: approx. 7,500 kg Operating hours Spindle hours: 2,483 h Machine operating hours: 14,198 h Control operating hours: 65,193 h EQUIPMENT Automatic tool changer with dual gripper Internal cooling through the spindle (IKZ), Form A High-pressure coolant system Additional coolant tank Two switchable filter cartridges Chip conveyor parallel to the X-axis Three-color signal light (red/yellow/green) Fully enclosed work area Work area lighting Machine documentation Toolbox Alignment screws and washers CE specification

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 710 x 450 x 510mm, Table size 760mm x 430mm, Cjdpfx Akoz R Rbdj Asri table load 500 kgs, spindle speed 8000rpm, spindle motor power 20Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 20m/min, Spindle taper BT40, 24 station ATC.

Condition: excellent (used), Year of construction: 2012, XYZ SMX 4000 ProtoTRAK CNC Bed Milling Machine ProtoTRAK SMX Control Year of Manufacture 2012 Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Credpfsyzf Nasx Ak Aji Table: 1474 x 355mm Max load 850kgs Travel: X – 1,060mm Y – 596mm Z – 520mm Dims without travels: W - 2370mm D – 2485mm H – 2660mm Weight - 3100Kgs For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79167 Machine Serial Number: 10836 Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 296 h, control type: CNC control, The Jinan Bodor P3T series is one of the manufacturer's most sought-after, fully enclosed industrial workhorses equipped with an automatic pallet changer. In addition to sheet metal processing, this machine is also designed for the precision cutting of tubes and profiles (T-version), allowing the entire production range to be covered with a single system.Dual Function: Flatbed sheet metal cutting and automatic tube cutting module in a single system. Maximum Safety: Fully enclosed protective cabin with laser safety glass for the complete protection of operators and the environment.Minimal Downtime: Automatic pallet changer system that enables loading and unloading during the cutting process.Outstanding Dynamics: High positioning speed and acceleration for maximum productivity.Intelligent Control: Bodor PRO. Technical Specifications: - Laser Source Power: 3000 W (3 kW) - Sheet Dimensions (X x Y): 3000 mm x 1500 mm - Tube Length Capacity: 6000 mm (6U execution) - Chuckable Tube Diameter: Ø20 mm – Ø170 mm (and corresponding square and rectangular profiles) Codpfoznwu Sjx Ak Aeri - Chuck System: Automatic pneumatic / electric self-centering chucks - Control Software: Bodor PROPositioning - Accuracy: ±0.03 mm - Cuttable Materials and Guideline - Maximum Thicknesses (3 kW): Carbon Steel / Mild Steel: max. 20 mm Stainless Steel: max. 10 mm Aluminum: max. 10 mm Brass / Copper: max. 6 mm Accessories and Scope of Delivery: - Factory industrial water chiller unit - Automatic voltage regulator / stabilizer - Extraction and dust filtration system - Automatic nozzle cleaner - Complete documentation and software licenses Condition and Inspection: - The machine has been continuously maintained and has a service history fully supervised by a specialized technician. It is currently in live production and can be inspected and tested under operating conditions by prior appointment. Subject to prior sale. Under power in Hungary.

Condition: used, Year of construction: 1997, Henkovac H 1000 – Industrial Vacuum Packaging & Sealing Machine (1997) The Henkovac B.V. H 1000, manufactured in 1997, is a robust industrial vacuum packaging and sealing machine designed for high-volume food processing environments. Built for reliability and durability, it is ideal for commercial kitchens, food processors, and manufacturing lines that require hygienic, efficient, and consistent vacuum packaging. Key Features: - Heavy-Duty Vacuum Packaging: Securely evacuates air from packages, extending product shelf life and maintaining quality. - Reliable Sealing: Ensures airtight seals for a variety of food products, including meats, cheeses, and prepared meals. - Industrial-Grade Construction: Designed for continuous operation in demanding food processing environments. - Versatile Application: Suitable for vacuum packaging of different types and sizes of food products. - Long-Term Reliability: Proven design ensures dependable performance even after decades of use. - User-Friendly Operation: Controls and interface designed for efficient workflow in industrial kitchens. Credpeyudxxsfx Ak Aoi Technical Highlights: - Manufacturer: Howden Food Equipment B.V. - Model: H 1000 - Year of Manufacture: 1997 - Machine Type: Industrial vacuum packaging and sealing machine - Applications: Food processing, commercial packaging, shelf-life extension Whether for high-volume production lines or specialized food processing tasks, the H 1000 delivers professional vacuum sealing performance, combining durability, hygiene, and reliability. More photos and full specifications: / * Manufacturer: Henkovac * Model: H 1000

Condition: used, Year of construction: 2021, functionality: fully functional, total length: 3,000 mm, total width: 700 mm, total height: 1,500 mm, type of input current: three-phase, overall weight: 250 kg, input voltage: 380 V, length stop: 3,000 mm, lifting height: 250 mm, We offer this used OZ MACHINE METEOR - II 420 lightweight aluminum circular saw, manufactured in 2021. Model: METEOR - II 420 Serial number: 018/210023 Year of manufacture: 2021 Total power: 3 kW Frequency: 50–60 Hz Voltage: 400 V AC 3P 1N PE Current: 6.4 A Dimensions (L×W×H): 3760×1080×1325 mm Csdpfxezy Upks Ak Aori Weight: 264 kg Air pressure: 6–8 bar Air consumption: 38 l/min Idle speed: 3000 r.p.m. Saw blade diameter: 420 mm Includes dust extraction system and compressor. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: AY11051, functionality: fully functional, cutting height (max.): 330 mm, overall weight: 1,500 kg, saw band length: 5,385 mm, saw band width: 100 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS SAWING AREA Sawing direction: Vertical. No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Sawing direction: Vertical Cut to feed roller: max. 230 mm Cut to stop: max. 260 mm Cut width to column: max. 300 mm Total opening: max. 480 mm Cutting height: max. 330 mm Saw band width: max. 100 mm Saw band length: min. 5,385 mm Saw band length: max. 5,485 mm Saw band thickness: min. 0.8 mm Saw band thickness: max. 1 mm Wheel diameter: 915 mm Table width: 1,010 mm Table length: 740 mm Feed roller type: Manual Dust extraction port diameter: 150 mm MACHINE DETAILS Main motor power: 15 kW Connected power: 15 kW Voltage: 400 V Current consumption: 28 A Fuse rating: 32 A DIMENSIONS & WEIGHT Dimensions (L x W x H): 2,000 x 950 x 2,400 mm Weight: 1,500 kg EQUIPMENT CE marking Max. cut to feed roller: 230 mm Max. cut to stop: 260 mm Max. cut width to column: 300 mm Max. total opening: 480 mm Max. cutting height: 330 mm SAW BAND Max. saw band width: 100 mm Min. saw band length: 5,385 mm Max. saw band length: 5,485 mm Min. saw band thickness: 0.8 mm Max. saw band thickness: 1 mm TABLE AND WHEELS Cjdpfo Af Hk Usx Ak Aori Wheel diameter: 915 mm Table width: 1,010 mm Table length: 740 mm FEEDING AND DUST EXTRACTION Feed roller type: Manual Dust extraction port diameter: 150 mm MACHINE DETAILS GENERAL Year of manufacture: 2002 Color: Blue Serial number: AY11051 CE marking: Yes ELECTRICS AND DRIVE Main motor power: 15 kW Connected power: 15 kW Voltage: 400 V Current consumption: 28 A Fuse rating: 32 A DIMENSIONS AND WEIGHT Overall length: 2,000 mm Overall width: 950 mm Overall height: 2,400 mm Weight: 1,500 kg

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, turning diameter over cross slide: 272 mm, turning length: 1,250 mm, turning diameter: 470 mm, spindle bore: 80 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 1,250 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 2,500 rpm, total height: 1,850 mm, total length: 2,700 mm, total width: 1,350 mm, type of input current: three-phase, overall weight: 2,300 kg, XYZ Proturn CNC/Manual Lathe Model: Proturn 410 Control: Proto Trak LX2 Swing Over Bed: 470mm Swing In Gap: 730mm Swing Over Cros Slide: 272mm Distance Between Centres: 1250mm Spindle Speeds: 50-2500 RPM Spindle Bore: 80mm Machine With: Cedpfjzux Iyex Ak Aeri 300mm 3 Jaw Chuck Quick Change Toolpost with Holders Dimensions: 2700 x 1350 x 1850mm high Weight: 2300 Kgs

Condition: used, Year of construction: 2009, XYZ Proturn SLX 1630 (2009), 400mm Swing Over Bed, 216mm Swing Over the Cross-slide, 760mm between Centres, 54mm Spindle Bore, 2500rpm Spindle, 5.75kW Spindle Motor, Prototrak SLX Control, 3 Jaw chuck, QCTP, Tailstock, Coolant. Machine Weight: 1530kg. Country of Origin: United Kingdom Location: These lots are located in Leicester and Coventry, UK. Please see individual lot for dismantling and loading charges. Cjdpfxe Ah E T Ij Ak Aeri

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Codjyahv Sspfx Ak Aori Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,300 h, machine/vehicle number: 921R50022874, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: MAX photonics, laser power: 2,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 360 mm, feed rate X-axis: 120 m/min, cutting speed: 1,600 mm/min, positioning speed: 120 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 14,700 kg, total length: 12,500 mm, total width: 4,700 mm, total height: 2,600 mm, tube wall thickness (max.): 6 mm, Equipment: cooling unit, emergency stop, fume extraction, safety light barrier, Laser machine for sale, in very good condition. It has a new laser source that is only a few months old. The machine has few operating hours and has been regularly maintained and is in daily use. It is possible to inspect and test the machine immediately upon arrangement. Credpfx Aezg D I Aok Aji NOTE: Capable of cutting round, square, rectangular, oval, D-shaped, and U-shaped tubes.

Condition: used, Year of construction: 2015, XYZ 2-OP Vertical Machining Centre ProtoTRAK TMX Control (2015) Year of Manufacture: 2015 Spindle Speeds to 6,000rpm Spindle Taper BT30 Table Size 457 x 381mm Table Travels 355 x 305 x 455mm (XYZ) 6 Station ATC Rapid Traveres 15m/min Footprint 760 x 1,220 x 2500mm Weight 1100kgs 415V Electrics Air Require for ATC For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79155 Machine Serial Number: SOP02060 Cost: £17,950.00 + VAT Codpfx Aeya H Nkok Aori Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 1,750 mm, spindle bore: 104 mm, spindle speed (max.): 1,800 rpm, type of input current: three-phase, Model:Prototurn 555 Swing Over Bed:560mm Distance Between Centres:1750mm Control: Prototrak SLX Csdpfx Akszrnkrj Aeri Spindle Speeds: To 1800 RPM Spindle Bore:104mm With: 300mm 3 Jaw Chuck Fixed Roller Steady Quick Change Toolpost Toolpost Holders Dimensions: 3940 x 2250 x 1910mm high Weight: 4100 Kgs

Condition: excellent (used), Year of construction: 2023, 400mm swing, 220mm max diameter, 490mm between Centres, Credpfxjz Srv Dj Ak Aei Siemens 828 Control, 65mm bar capacity, 12 station VDI30 turret, 17kW Spindle Motor, Spindle Speed 4000rpm, 0.001 degree C axis, +/- 35mm Y axis, low volt light, coolant, Tool setter, Tailstock, swarf conveyor

Year of construction: 2022, condition: new, We are selling the gummy-making machine because we no longer use it. The machine has never been used and has been stored in our production facility for all these years. You can view it at our warehouse. Cedjz Rzknjpfx Ak Ajri If you are interested, please contact me.

Condition: new, number of aggregates 2 St. working width 2000-3500 mm work height max. 2450-3200 mm Wintech M9Cb Sealing Machine Automatic sealing system for wooden windows and doors with 2 processing units. For a detailed description, see the PDF document. ----- Manufacturer’s technical description: M9Cb robotic sealing system The machine comprises a robust structure made from aluminium profiles, fitted with motorised conveyor belts on which the window units are transported. The silicone is distributed evenly into the joint by means of two automatically controlled nozzles. The electronic control system, which is in constant communication with the sensor, determines the movement of the guns and the operating parameters. Technical data: Standard Optional Max. window width 2000 mm 3500 mm Max. window height 2450 mm 3200 mm Max. window thickness 160 mm 190 or 250 mm* Max. window weight 150 kg 200 or 400 kg* Loading station 2000 mm 3500 mm Unloading station 2000 mm 3500 mm Choice of silicone: Standard 1 colour 2 or 3 colours Master head 1 2 Sealing of timber panels no yes Formulation adapted to the type of elements no yes Synchronised conveyor belt no yes Csdjzmy Ifspfx Ak Aori for heavy loads and/or conveying in both directions Double movable crossbar for flush-mounted hinged window sashes no yes *Please contact us for greater thicknesses or weights Optimisation of the sealing process: The M9Cb robotic sealing system revolutionises the sealing process by injecting exactly the right amount of silicone, thereby preventing unwanted streaks. It enables the glazing beads to be ‘nailed’ invisibly and saves the time required to cover the nail heads. The precision ensures high-quality, uniform sealing, which guarantees optimal watertightness whilst maximising the clarity of the units. With a feed speed of approx. 2 metres per minute, it offers fast and efficient processing on both sides simultaneously (on average 4 minutes per unit). More space available: No more lack of space in the workshop! The M9Cb operates vertically and therefore takes up very little floor space. Leaning against a wall or partition, it frees up the space previously occupied by horizontal sealing tables. In addition, a strategically positioned conveyor belt can also serve as a vertical glazing table, thereby optimising the layout of the work area Automation of sealing: To ensure a seamless seal, it is no longer necessary to juggle the window unit or struggle with fitting seals. The M9Cb automates this laborious process on both sides Time savings: Thanks to the M9Cb, the workflow is no longer one-dimensional. Whilst the machine takes care of sealing the windows and doors, the operator can work on other tasks, e.g. glazing, blocking, packaging... This versatility enables the operator to diversify their activities and thus offers them a more rewarding experience. ----- ----- Price of the above machine on request! -----...

Condition: used, Year of construction: 2017, machine/vehicle number: STA00197, XYZ CT52 2 Axis CNC Lathe Box Ways Slides Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm X-axis stroke 115mm Z-axis stroke 290mm Spindle speed 5000 rev /min Spindle Bore 61mm Max’ bar work dia. 52mm 12 Station VD130 Turret Tailstock stroke 90 mm Crodpjzkbirsfx Ak Aji Rapid traverse rate 20 m/min X & Z Axis Cutting Feed rate 10 m/min X & Z Axis Machine Weight 2500Kgs Machine Size 1700 x 1240mm Manufactured 2017 Machine supplied with: 3 Jaw Chuck Power Chuck Tool Setting Probe Parts Catcher Chip Conveyor Auto Lubrication High Intensity Machine Light Toolbox For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79265 Machine Serial Number: STA00197 £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 1630 ProtoTRAK CNC Gap Bed Centre Lathe Ex Research machine – Superb Condition ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 760mm Max’ Swing over Cross-slide 218mm Max Swing over Bed 400mm Spindle Bore 52mm Spindle Speeds 150 – 2500 rev/min Spindle Motor 5.75Kw Crjdpfjzav D Dsx Ak Asi Spindle Camlock D1-6 Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 60mm Tailstock Travel 127mm Manufactured | 2011 Weight 1560Kgs Supplied with: Two-axis CNC, Two-axis DRO. TRAKing, Constant surface speed. Electronic hand-wheels for X & Z Axes. Joystick for feed & rapids. Interlocked chuck guard and main guard. Quick change toolpost with holders. 3 Jaw chuck 5C Collet Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78211 Machine Serial Number: 16P99080-063 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, working width: 1,300 mm, overall weight: 7,500 kg, No minimum price – guaranteed sale to the highest bidder! Cjdpo Af Hntjfx Ak Aeri TECHNICAL DETAILS Working width: max. 1,300 mm Number of spray booths: 1 Pump type: Wagner Number of spray guns: 4 MACHINE DETAILS Weight: 7,500 kg Number of transport packages: 7 EQUIPMENT Spray guns Documentation

Condition: used, machine/vehicle number: 008238, X axis working area: 3660 mm Y axis working area: 1550 mm Crsdpjx A E Tfsfx Ak Aoi Working Table: Flat table Main Electrospindle power: 12 KW Number of controlled axes: 3 axes Total number of drilling spindles: 12 Total number of tool changer positions: 15

Condition: used, machine/vehicle number: 007564, X axis working area: 3700 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 10 KW Cjdpfxjum H Eks Ak Ajri Number of controlled axes: 3 axes Total number of drilling spindles: 12 Total number of tool changer positions: 13

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Equipment: documentation/manual, Professional Spiral Duct Forming Machine – Ø80–1600 mm We are offering for sale a complete industrial machine for the production of round spiral ducts (SPIRO ducts) for HVAC, ventilation and dust extraction systems. We are the first owner. The machine was purchased directly from the manufacturer, professionally commissioned, configured and fine-tuned for production. It has only been used occasionally for our own production requirements and has never been operated in continuous or multi-shift mass production. The machine is fully operational, properly adjusted and ready for production. It is currently connected and can be demonstrated under actual production conditions, allowing the buyer to inspect the complete process and the quality of finished ducts before purchase. Key Features * working diameter range: Ø80–1600 mm * production speed: up to 60 m/min * installed power: 11.25 kW * galvanized steel: 0.4–1.2 mm * stainless steel: 0.4–0.7 mm * aluminium: 0.4–1.3 mm * pneumatic sheet metal strip decoiler * touchscreen control panel * automatic lubrication system * automatic forming angle adjustment * automatic rotary cutting * automatic fault detection * smooth ducts or single/double reinforcing beads * external spiral lock seam * machine weight: approx. 2,900 kg 39 Forming Heads Included The machine comes with an extensive set of 39 forming heads covering 22 diameters: Ø80 (1), Ø100 (2), Ø125 (3), Ø160 (3), Ø200 (3), Ø250 (3), Ø315 (3), Ø355 (2), Ø400 (2), Ø450 (2), Ø500 (2), Ø560 (2), Ø630 (2), Ø710 (1), Ø800 (1), Ø900 (1), Ø1000 (1), Ø1120 (1), Ø1250 (1), Ø1400 (1), Ø1500 (1), Ø1600 (1). The set therefore covers the full working range from Ø80 to Ø1600 mm, with additional heads for the most commonly produced diameters. Spare Parts Package A comprehensive package of spare and wear parts is included, such as forming and guiding components, lock-seaming rollers, pneumatic components, cutting knives/rotary cutting components and decoiler braking parts. This provides an important operational reserve and helps minimise downtime without having to immediately source essential parts internationally. Production-Ready + Training The buyer receives a fully configured and proven production machine, not an uncommissioned unit requiring extensive setup and adjustment. We provide on-site commissioning assistance and operator training at the buyer’s facility, including machine operation, forming head replacement, adjustment for different diameters and sheet thicknesses, maintenance and trial production. The machine can be inspected and demonstrated during actual spiral duct production before purchase. Approximately 100 steel stacking racks (Maurack type) for storing and transporting finished ducts are also available and can be purchased together with the machine. The machine is located in Poland. Transport can be arranged individually. Price: upon request / subject to negotiation. Codpfjzt Ni Ejx Ak Ajri For further information, photos, videos or to arrange a live machine demonstration, please contact us directly.

Condition: ready for operation (used), Year of construction: 2012, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2012) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders 2 x Fixed Steadys 15” Interlocking Guards Crsdpfx Aksyaywhj Aei Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79024 Machine Serial Number: SLM00035 £47,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.