Used Screenprinting Machine for sale (64,850)

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Print format: 600 mm x 900 mm Max. sheet format: 650 mm x 950 mm Max. screen frame format: 700 mm x 2160 mm x 40 mm Table size: 700 mm x 1000 mm Cycle rate: 1200 pieces per hour Machine dimensions (L x W x H): 1600 mm x 1080 mm x 1700 mm Squeegee and presqueegee adjustment: 40 mm Infinitely adjustable squeegee angle: +/- 10° Adjustable snap-off: 0 - 40 mm, stepless Main frame fine adjustment: +/- 15 mm Max. material thickness: 0 - 40 mm Hedpfx Asdx Raqjb Usk Machine weight: 600 kg Connected load: 400 Volt / 50 Hz - 3 kW Air connection: 6 bar

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, rotational speed (max.): 2,500 rpm, swing diameter over bed slide: 470 mm, center width: 1,000 mm, TECHNICAL DETAILS Distance between centres: 1,000 mm Swing diameter over bed: 470 mm Spindle speed ranges 1: 50–270 rpm 2: 150–850 rpm 3: 450–2,500 rpm MACHINE DETAILS Electrical supply Mains voltage: 415 V Phases: 3 Frequency: 50 Hz Control voltage: 24 V Main motor power: 7.5 kW Main motor current draw: 13 A Auxiliary motor power: 0.173 kW Auxiliary motor current draw: 1.55 A Total motor power: 7.673 kW Hodpfx Abjywg Rde Uok Total current draw: 14.55 A

Condition: like new (used), Thom Type SI Spout Inser­ter Machi­nes for inser­ting the spouts into pre­fa­bri­ca­ted pou­ches. Model - Thom SI‐900 Semi­au­to­ma­tic machi­ne Ide­al for sam­ple pro­duc­tion and small series pro­duc­tion Hedjx Utd Eepfx Ab Usk Capa­ci­ty: Up to 10 pou­ches / min. Thom fil­ling and packa­ging machi­nes are in demand ever­y­whe­re whe­re fle­xi­ble packa­ges need to be fil­led (pou­ches / refills): in the food indus­try, the cos­me­tics and deter­gents indus­try or in the beverage fil­ling.

Condition: good (used), Year of construction: 2001, In good technical condition and fully operational. Manufacturer: Rollsett Machine Oy Finland. Year of manufacture: 2001. Profile height: 18 mm. Entry width: 1,250 mm. Overall width: 1,146 mm; 1,166 mm. Construction width: 1,100 mm. Min./max. length: 0.5 lm/8 lm at a thickness of 0.50 mm. Accessories, aids: screws, sealing tapes, profiled seals, anti-condensation treatment, light profiles. Hodpfxex Tf Ite Ab Ujk

Condition: not inspected (used), Year of construction: 2014, machine/vehicle number: 12097, CNC Milling Machine XYZ SMX3500 The machine is in very well-maintained condition. ● Condition: Not inspected Hsdeyvi Enepfx Ab Usk ● Delivery terms: Free on truck (FOT) ● Location: 42477 Radevormwald, Germany ● Availability: By arrangement – Collection date for the item is set for 06.05.2026. Unfortunately, collection outside of this timeframe cannot be accommodated. ● Payment terms: Advance payment by bank transfer ● Internal ID: DÄ10 ● Power-on demonstration possible: Yes Technical specifications: ● Control: PROTO TRAK SMX ● Table dimensions: 1200 x 300 mm ● Spindle speed: 5,000 rpm ● Main drive power: 3.75 kW ● 400 V ● 50 Hz Scope of delivery: ● Available manuals (completeness not guaranteed) ● Hoffmann vice, jaw width: 125 mm ● Machine lamp Dimensions & weights: ● Installation dimensions (L x W x H approx.): 2000 x 2000 x 2500 mm ● Weight approx.: 2,500 kg If you have any questions or would like to arrange an inspection, please feel free to contact us! Additional notes: ► On request, we can offer transport to the destination ► The quoted price is net, plus VAT ► The goods are sold under exclusion of any warranty ► Technical data provided without guarantee ► Subject to prior sale ❗Sale of the item is exclusively to businesses❗

Condition: not inspected (used), Year of construction: 2014, machine/vehicle number: SL375, CNC Lathe XYZ SLX355 ● Condition: Unchecked ● Delivery terms: Free loaded on truck ● Location: 42477 Radevormwald, Germany ● Availability: By arrangement – The pickup period for the equipment is set for 06/05/2026 and 07/05/2026. Unfortunately, collection outside this timeframe cannot be accommodated. ● Payment terms: Advance payment – by bank transfer ● Internal reference number: DÄ5 ● Inspection under power: Yes Hjdpfx Absyvi A Tj Ujk Technical specifications: ● Control system: PROTO TRAK SLX ● Drive power: 5.5 kW ● Spindle speed: max. 4000 rpm ● Turning length approx.: 750 mm ● Swing over bed approx.: 400 mm ● Swing over cross slide approx.: 180-200 mm Equipment: ● Three-jaw chuck (diameter: 200 mm) ● Tailstock ● Quick-change tool post Scope of delivery: ● Available manuals ● Set of quick-change tool holders with turning tools ● Four-jaw chuck (Röhm, diameter: 160 mm) ● Toolbox with accessories as shown in the images Dimensions & weight: ● Footprint (L x W x H) approx.: 2300 x 1400 x 1900 mm ● Weight approx.: 2000 kg If you have any questions or wish to arrange an inspection, please do not hesitate to contact us! Additional notes: ►Transport to the destination can be offered upon request ►The offer price is net plus VAT ►The equipment is sold with exclusion of any warranty ►Technical data provided without guarantee ►Subject to prior sale ❗Sale exclusively to business customers❗

Condition: used, Year of construction: 2014, Technical details: max. turning diameter: 350 mm turning length: 540 mm control: 0i-TD swing dia.: 510 mm bar material dia.: 66 mm spindle bore diameter: 76 mm travel -x axis: 200 mm travel -z axis: 560 mm Spindle 1 RPM: 4000 1/min Spindle 1 Power: 18,5 kW turret stations / rotary tool stations: 12/0 BMT 55 Rapid traverse feeds x/z: 24/ 24 m/min Hodpfoyv Erdox Ab Uek tailstock quill taper MT: MK4 (Live) Tailstock Travel: 490 mm tailstock quill stroke: 80 mm tailstock quill diameter: 75 mm dimensions of the machine ca.: 3500 x 1400 x 1850 mm total power requirement: 32 kW weight of the machine ca.: 4 t Accerories Chip conveyor Parts catcher Spindle 1 Chuck 200 mm manual tool eye Samsung turning center in excellent condition with rotary tools, y-axis and subspindle for complete manufacturing of components. *

Condition: used, Year of construction: 2015, Technical details: max. turning diameter: 350 mm turning length: 540 mm control: 0i-TD swing dia.: 510 mm bar material dia.: 52 (66) mm spindle bore diameter: 61 (76) mm travel -x axis: 200 mm travel -z axis: 560 mm Spindle 1 RPM: 4000 1/min Spindle 1 Power: 18,5 kW turret stations / rotary tool stations: 12/12 BMT 55 Power rotary tools: 3,7 /2,2 kW RPM of rotary tools: 6000 1/min torque rotary tools: 26,2 Rapid traverse feeds x/z: 24/ 24 m/min tailstock quill taper MT: MK4 (Live) Tailstock Travel: 400 mm tailstock quill stroke: 80 mm tailstock quill diameter: 75 mm dimensions of the machine ca.: 3500 x 1400 x 1850 mm total power requirement: 32 kW weight of the machine ca.: 4 t Accerories Chip conveyor Parts catcher Spindle 1 Chuck 200 mm manual tool eye Samsung turning center in excellent condition with rotary tools, y-axis and subspindle for complete manufacturing of components. * Hjdpeyv En Ssfx Ab Uek

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: SOP10107, travel distance X-axis: 355 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 455 mm, table width: 381 mm, table length: 457 mm, spindle speed (min.): 10,000 rpm, number of slots in tool magazine: 8, XYZ Machine Tools XYZ 2-OP (2020 Model) Upgrade your workshop with this reliable and high-performance CNC machine from XYZ Machine Tools Ltd, a trusted name in precision engineering. Machine Specifications: Feature Spec / Capability Travel (X × Y × Z) ~ 355 mm × 305 mm × 455 mm Table size ~ 457 mm × 381 mm Max work load ~ 250 kg Spindle BT30 taper, 10,000 rpm, ~ 3 hp (≈ 2.2–2.3 kW) motor Hjdexd Dgyopfx Ab Ujk Tool changer 8-station automatic tool changer Rapid traverse ~ 15 m/min (X/Y/Z) Control ProtoTRAK TMX conversational CNC (menu-driven, with G-code compatibility), USB file transfer Accuracy / repeatability Positioning accuracy typically around ±0.005 mm (varies with condition), repeatability ±0.003 mm Footprint ~ 760 × 1,220 mm, ~ 2.5 m tall Machine weight ~ 1,100 kg • Year of Manufacture: 2020 • Rated Voltage: 400V • Full Load Current: 15A • Short Circuit Rating: 10kA • Phase: 3 • Cycle: 50Hz • Main Motor Power: 2.2 kW • Max Spindle Speed: 10,000 RPM • Pneumatics: 6 bar / 100 L/min • CE Certified _____ Practical machining use • High-speed drilling, tapping, and small-tool milling: The 10k rpm spindle makes it much better for smaller cutters (Ø3–10 mm) and aluminium machining compared to the older 6k rpm version. • Secondary ops & light milling: Great for “clean-up” cuts, bolt holes, chamfers, flat milling, and side ops after turning. • Batch work with multiple ops: The 8-station tool changer is limiting, but with smart tooling (spot, drill, tap, end mill, chamfer, face) you can cover a lot. • Compact footprint: It can be placed near lathes or VMCs to absorb “2-op” bottlenecks. Condition: • Excellent working order • Lightly used, well-maintained. Has only been used to make Aluminium and Nylon shop fittings. • Ready to go straight into production Why Choose the XYZ 2-OP? • Precision engineering and durability • High spindle speed and robust motor for versatile machining • Compact and efficient design • Backed by XYZ’s reputation for service and reliability Don’t miss this opportunity to own a top-quality XYZ 2-OP machine—perfect for workshops, tool rooms, and production facilities looking to boost their machining capabilities.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Hsdpfxjyahv Sj Ab Uek Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Year of construction: 2019, condition: like new (used), ETIKETT LABELLING MACHINE FOR SELF-ADHELSIVE LABELS YOM 2019 NEW CONDITION WAS USED FOR STICKING LABELS WITH NECESSARY DESCRIPTION ON TETRA PAK PACKAGES Hsdpfx Aoyynlzob Ujk STILL IN PRODUCTION TILL MAY 15TH

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, We are selling our Knuth Werkzeugmaschinen GmbH lathe. High-quality centre lathe with leadscrew and feedshaft, equipped with a 3-axis position display. We are relocating and no longer require the machine, so it is available for sale. It is currently still in operation and can be inspected on-site. Proven classic with gear transmission: - Cost-effective and retains its value - Clearly arranged control panel with ergonomically positioned selector levers - Camlock spindle mount D1-6 - Wide, ground and hardened bed with a solid one-piece cast base - Tailstock can be offset laterally for taper turning - Large selection of thread pitches - Removable gap bridge for machining large diameters - Stop spindle with four adjustable length stops - Optional: quick-change toolpost system, among others 3-axis position display: - Higher machining accuracy - Reduced error rate - Greater production reliability - Significant time savings - Increased productivity - Optimal legibility of the display - User-friendly functions - Clearly arranged keypad - Resolution 0.01 / 0.005 mm - Pre-setting of coordinate values - Retains axis position when display is switched off - Bolt hole circle calculation - Integrated calculator function - Memory for 10 tools - Switch between radius/diameter display - mm/inch conversion - Easy mounting, maintenance-free operation - Display of cross slide (Z0) and carriage (Z1) both individually or as a differential/sum value on lathes Technical data – Turnado 230/1500 – Centre lathe with leadscrew and feedshaft Working area - Centre distance: 1500 mm - Max. swing over bed: 460 mm - Max. swing over cross slide: 270 mm - Max. swing over gap bridge: 690 mm - X-axis travel: 285 mm - Z1-axis travel: 128 mm - Gap bridge length: 165 mm - Bed width: 300 mm - Top slide swivel range: ±52° Main spindle - Spindle speed (12 steps): 25–2000 rpm - Spindle bore: 58 mm - Spindle mount: Camlock D1-6 Hjdpfxjyxfuqs Ab Ujk - Spindle taper: MT 6 Feed - X-axis feed: 0.014–0.784 mm/rev - Z-axis feed: 0.031–1.7 mm/rev Thread cutting - Metric threads (41): 0.1–14 mm - Diametral pitch threads (50): 4–112 DP - Module threads (34): 0.1–7 mm - Whitworth threads (60): 2–112 TPI Tailstock - Tailstock quill diameter: 60 mm - Tailstock taper: MT 4 - Tailstock quill travel: 120 mm - Tailstock lateral adjustment: ±13 mm / ±0.5" Drive capacities - Main drive motor power: 5.5 kW - Supply voltage: 400 V Dimensions and weight - Dimensions: 2750 x 1080 x 1340 mm - Weight: 1970 kg

Condition: good (used), Laminating Machine Komfi Delta 76 Stacker Manufactured in 2016/2017. The machine is 100% operational and ready for operation. This is an advanced, high-performance machine, ideal for commercial laminating. The machine is in very good condition and ready for production. Technical specifications: Max sheet size: 760mm x 1120mm Hjdoyur Nljpfx Ab Uek Min sheet size: 300mm x 220mm Min grammage: 115 gsm Max grammage: 600 gsm Operating temperature: 80-145°C Max operating speed: 35m/min Built-in Becker compressor Weight: 2800kg 380V power supply Additional air supply: 6 bar Power consumption: 18kW Pneumatic clamping, separation, and automatic feeding from a high stack, automatic stacker. Touch panel for easy operation. Sheet straightening module. Tool kit and foil included.

Condition: new, Year of construction: 2025, -TFON Leveltech® Leveling Machine. -The TFON Leveltech® is a robust and precise leveling machine designed to handle a wide range of material thicknesses with efficiency and ease. Engineered for reliability and performance, it ensures flat, smooth surfaces on metal sheets and strips to meet stringent quality standards Hedskyrphspfx Ab Usk Key Specifications: -Material Thickness: 1 mm – 30 mm. -Maximum Material Width: 1,600 mm -Minimum Material Length: 145 mm -Quick Change System for Straightening Rollers: Standard -Flattening Gap Adjustment: Servo Hydraulic with PLC Control. -Machine Dimensions (L × W × H): 5,465 × 6,735 × 2,300 mm. -Total Weight: 40.000 kg

Condition: new, Year of construction: 2025, -TFON Leveltech® Leveling Machine Series. -Model: L-9060. -Material Thickness: 1.0 mm – 30.0 mm. -Maximum Material Width: 600 mm. -Minimum Material Length: 145 mm. -Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled Overload Protection: Standard Machine Weight: 26.000 kg. Machine Dimensions (L × W × H): 4,400 × 7,185 × 2,260 mm Model: L-9011 Material Thickness: 1.0 mm – 30.0 mm. Maximum Material Width: 1,100 mm. Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled Overload Protection: Standard Machine Weight: 31.000 kg Machine Dimensions (L × W × H): 4,600 × 7,185 × 2,260 mm Model: L-9013 Material Thickness: 1.0 mm –30.0 mm Maximum Material Width: 1,300 mm Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled Overload Protection: Standard Machine Weight: 35,000 kg Machine Dimensions (L × W × H): 5,000 × 7,185 × 2,260 mm Model: L-9016 Material Thickness: 1.0 mm –30.0 mm Maximum Material Width: 1,500 mm Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled. Hodpehwb U Tjfx Ab Uek Overload Protection: Standard Machine Weight: 40.000 kg Machine Dimensions (L × W × H): 5,200 × 7,185 × 2,260 mm Model: L-9020 Material Thickness: 1.0 mm –30.0 mm Maximum Material Width: 2,000 mm Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled. Overload Protection: Standard Machine Dimensions (L × W × H): 5,700 × 7,185 × 2,260 mm.

Condition: new, Year of construction: 2025, *TFON Leveltech® Leveling Machine Series. -Models: M-5560, M-5511, M-5513, M-5516. Hjdpfx Aohwb Uwjb Uek -Engineered for precise leveling of materials with a thickness range from 1.0 mm to 15.0 mm, these models offer flexibility in material width and advanced control features for optimal performance -Material Thickness: 1.0 mm – 15.0 mm -Maximum Material Width: M-5560: 600 mm. M-5511: 1.100 mm. M-5513: 1,300 mm. M-5516: 1,500 mm. Minimum Material Length: 110 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled Machine Weight: M-5560: 12.000 kg M-5511: 15.000 kg M-5513: 18,000 kg M-5516: 19.000 kg Machine Dimensions (L × W × H): M-5560: 2,800 × 2,905 × 1,950 mm M-5511: 3,300 × 2,905 × 1,950 mm M-5513: 3,500 × 2,905 × 1,950 mm M-5516: 3,700 × 2,905 × 1,950 mm

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH bucket-type sand washers are designed to effectively separate clay, dust, and foreign matter from aggregate materials, thereby improving material quality. Their durable construction and simple design ensure both long-lasting use and easy maintenance. The bucket system consumes minimal energy while washing the material through water circulation and significantly reduces water consumption. This provides an environmentally friendly solution and lowers operating costs. Standing out for their ease of installation and use, CONSTMACH bucket (Wheeled) sand washers are an ideal choice for improving aggregate quality in stationary or mobile crushing and screening plants. CBW-80 Bucket (Wheeled) Sand Washer Technical Specifications Motor Power: 5.5 kW Capacity: 80 – 90 m³/hour Bucket Size: 800 x 550 mm Rotation Speed: 2.5 rpm Wheel Diameter: 3,000 mm Number of Buckets: 40 CBW-100 Bucket (Wheeled) Sand Washer Technical Specifications Motor Power: 7.5 kW Capacity: 110 – 120 m³/hour Bucket Size: 1,000 x 550 mm Rotation Speed: 2.5 rpm Wheel Diameter: 3,000 mm Number of Buckets: 40 Why Choose CONSTMACH Bucket Washers? Hjdpfx Aexp Urwjb Usk CONSTMACH is a leading brand offering reliable, efficient, and long-lasting solutions in the stone crushing and screening industry. Manufactured to high engineering standards, our bucket (Wheeled) sand washer models stand out with their minimal maintenance requirements, low operating costs, and high performance. Our professional approach to spare parts supply, technical support, and after-sales service ensures maximum efficiency for our users. By choosing CONSTMACH bucket washers, you can increase quality in your production processes and gain a sustainable production advantage by saving energy and water. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting use.

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, Vertical Shaft Impact Crushers (VSI) stand out among rock crushing machines due to their high crushing efficiency and excellent particle shape production. Developed by CONSTMACH, these sand-making machines are used in the tertiary crushing stage to give cubic form to materials obtained from secondary crushers and to produce a high proportion of fine material. The system offers superior performance in processing all types of minerals and ores, as well as hard rocks such as basalt and granite. High-quality sand is produced from materials with a maximum feed size of 45 mm. Vertical shaft impact crushers allow you to easily obtain the desired product size for different material types thanks to their variable speed rotor system. It offers production capacity flexibility with a high reduction ratio, large feed hopper, and four different crushing chambers. In addition, high-chromium wheel shoes, anvils, and heavy-duty bearings ensure long life and low maintenance costs. The independent lubrication system and optional anvil replacement mechanism maximize uptime. Vertical Shaft Impact Crusher Technical Specifications Model: VSI-700-CR Maximum Feed Size: 35 mm Weight: 6,500 kg Motor Power: 110 kW Rotor Diameter: Ø700 mm Rotor Speed: 60–70 m/s Production Capacity: 60–100 t/h Model: VSI-800-CR Maximum Feed Size: 40 mm Weight: 12,000 kg Motor Power: 2 x 160 kW Hodpfx Abexqf Uro Usk Rotor Diameter: Ø800 mm Rotor Speed: 45–60 m/s Production Capacity: 150–200 t/h Model: VSI-900-CR Maximum Feed Size: 45 mm Weight: 14,500 kg Motor Power: 2 x 185 kW Rotor Diameter: Ø900 mm Rotor Speed: 50–60 m/s Production Capacity: 200–250 t/h Model: VSI-1000-OR Maximum Feed Size: 90 mm Weight: 15,000 kg Motor Power: 2 x 200 kW Rotor Diameter: Ø975 mm Rotor Speed: 50–60 m/s Production Capacity: 250–300 t/h Why Choose CONSTMACH Vertical Shaft Impact Crushers? CONSTMACH is a globally preferred brand in the production of stone crushing machines and sand making machines with its engineering quality. Our vertical shaft impact crushers offer high performance, low operating costs, and long-lasting use. Our models, which can be customized to the production needs of each facility, provide the advantages of easy maintenance and high efficiency. CONSTMACH is always the right choice for businesses seeking quality, reliability, and sustainable production. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH log washer (Pallet Washer) is a high-performance washing machine developed specifically for cleaning large aggregates with high clay content. Designed to deliver maximum efficiency under demanding working conditions, this system effectively removes dirt from the material, ensuring high-quality aggregate production in construction, mining, and recycling facilities. Its twin-shaft design creates a powerful scrubbing effect on the material, breaking down even the most stubborn dirt and ensuring clean, ready-to-use material. The CONSTMACH pallet washer offers operators high flexibility with its adjustable shaft angle and speed control, enabling optimal washing performance for different types of aggregates. Its robust body, high-strength material usage, and easy maintenance ensure long-lasting operation. Furthermore, it can process hundreds of tons of material per hour without compromising cleaning quality, even in facilities requiring high capacity. This equipment improves the quality of aggregates used in construction projects, optimizes mineral separation processes in mining, and contributes to the production of reusable materials in recycling plants. Effective removal of foreign matter extends the life of subsequent crushing and screening equipment and reduces operating costs. Log Washer (Pallet Washer – Coarse Material Washer) Technical Specifications Machine Size: 2000 x 7000 mm (Double Shaft) Electric Motor Power: 2 x 37 kW, GAMAK Brand, IE3 Efficiency Class, 1500 rpm Feed Size: 0 - 50 mm Main Body Material: S235JR A1 Quality, 8 mm Rolled Sheet Rotation Speed: 15 - 25 rpm Helix: Double Shaft Spiral Pallets, S235JR, 8 mm Sheet, Cast Arms Resistant to Wear and Hardox Coating Shaft: Cr-Ni-Mo Alloy Steel Body: GS52 Steel Casting Bearings: SKF or FAG, Heavy Duty Roller Bearings Production Capacity: 200 - 400 t/h Weight: 24,000 kg Why Should You Choose CONSTMACH Log Washer (Pallet Washer – Coarse Material Washer)? CONSTMACH combines quality, durability, and efficiency with its log washer systems developed through years of experience. Each component is designed for long life and minimal maintenance. Thanks to its high-capacity washing performance, energy efficiency, and ease of use, you will get the most out of your investment in the shortest time possible. CONSTMACH also guarantees the uninterrupted operation of your business with its after-sales support and spare parts services. If you are looking for a reliable solution for clean, solid, and high-quality aggregates, the CONSTMACH pallet washer is the right choice. Hjdpfxsxp Urde Ab Ujk What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting

Condition: good (used), 1 x Powder Packing Machine/Powder Depositor Model: AF-PP5 Range of pack: 1-1.5kg Hedpfoyt H Aqox Ab Uek With weigher

Condition: new, mileage: 1 km, power: 50 kW (67.98 HP), gearing type: automatic, fuel type: diesel, overall weight: 2,850 kg, lifting power: 1,000 kg/m, drive condition: 100 %, chain condition: 100 %, Year of construction: 2024, Equipment: additional headlights, cabin, GG010 Hsdpeiit Erjfx Ab Uok The new Günter Grossmann GG010 LOADER The Günter Grossmann GG08 loader (1000 kg payload) is brand new. Günter Grossmann is a high quality machine made for a European company. The charger is very strong and can work under all conditions. The charger is very nice. The control panel is very nice and clear. The cabin is soundproof, insulated, equipped with heating, very comfortable and beautifully glazed, allowing safe and comfortable work. The machine has a very durable construction. The machine is equipped with a quick coupler, which makes it possible to change accessories quickly without leaving the cab. Additional equipment: 4 in 1 bucket, crocodile grab, crocodile grab for trees, straw or silage. Price 14,550 euros (excl. VAT) Included as standard GG010 loader + bucket + pallet fork + quick coupler Model 1000 kg SPECIFICATIONS Model: GG10 Brand: Günter Grossmann Engine: Changchai 390 Engine: In-line setup, water-cooled four-stroke diesel engine Engine power: 50 hp Speed: 2200 r/min (rpm) Steering system: Cycloid full hydraulic steering system: BZZ-80 System Pressure: 10MPa Service brake: Hydraulic four-wheel brake with staggered shoes Parking brake: manual Tire: 10-16.5 Wheelbase: 2170mm Track: 1285 mm MEASUREMENTS Total length (bucket at ground position): 41--mm Ground to top of cab: 2530 mm Total width: 1600 mm WORKING RANGE Bucket capacity: 0.5 m3 Bucket width: 1600 mm Max. Height Breakout Force: 28KN Rated load: 1000 kg Operating weight: 2850 kg Drive means: four-wheel drive Min turning radius: 4600 mm ACCESSORIES Bucket 4 w 1: 1050 Eur Pitchfork: 1050 Eur Pallet fork: 650 Eur Quick coupler: 600 Eur Drill: 1400 Eur Bale clamp: 950 Eur Grass clip: 950 Eur Lawnmower: 1450 Eur Snowplow: 1375 Eur

Condition: not inspected (used), functionality: unexamined, overall weight: 70 kg, total height: 170 mm, jaw width: 160 mm, total length: 550 mm, total width: 160 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item on time, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Jaw width: 160 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 550 x 160 x 170 mm Weight: 70 kg Hsdpfxeyn Edps Ab Usk External reference: Lot 65/ Lotec

Condition: not inspected (used), functionality: unexamined, overall weight: 80 kg, total height: 130 mm, total length: 420 mm, total width: 300 mm, No reserve price – guaranteed sale to the highest bidder! By placing a bid, you commit to collection within the specified periods: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. Auction of two vices with jaw widths of 120 mm & 160 mm! TECHNICAL DETAILS Jaw widths: 120 mm x 160 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 420 x 300 x 130 mm Hjdpfxeyn Eaks Ab Uok Weight: 80 kg External reference: Lot 9 / L. Schaible

Condition: not inspected (used), functionality: unexamined, overall weight: 70 kg, total height: 160 mm, jaw width: 160 mm, total length: 580 mm, total width: 350 mm, No minimum price – guaranteed sale to the highest bidder! Hsdpfx Asyn Dzgob Uok Placing a bid obligates timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Jaw width: 160 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 580 x 350 x 160 mm Weight: 70 kg External reference: Lot 8 /L.Schaible

Condition: used, Year of construction: 2002, functionality: limited functionality, machine/vehicle number: 2123, FAMAR AP60, including one size part for tablets and one size part blister PVC-ALU, 10 cells, for capsules size “0” Hjdpfxov S Euro Ab Uok Sold as seen