Used Divider for sale (1,005)

Condition: used, Measuring transducers, power measuring transducers, active power measuring transducers, analog converters, frequency/analog converters, frequency dividers, isolating converters, signal converters, isolating converters, switching amplifiers -Manufacturer: Schuhmann, switching amplifier -Type: SV 5.20G-312 -Price: per piece Nwsdpfx Aisf Iyu Nsujk -Number: 4 piece -Dimensions: 80/23/H105 mm -Weight: 0.1 kg/piece

Condition: used, Rotary table, rotary indexing table, dividing head, dividing head -Manufacturer: WMW Heckert, rotary table type D 315 k TGL 28561/02 -Clamping surface: O 315 mm -Height: 140 mm -Groove: 14 mm -Dimensions: 615/540 / H150 mm -Weight: 83 kg Nwjdpeg Rczfefx Aiuok

Condition: used, Reversible clamp, 4th axis, rotary table, rotary dividing table, controlled rotary table, dividing apparatus, dividing head, rotary indexing table Hydraulic rotary coupling -Manufacturer: Romheld, hydraulic reversible clamp with rotary coupling type 9284-003 711 -Number: 2x clamping unit available -Price per piece -Dimensions: 700/335/H430 mm Nsdpohvtcqofx Aiuewk -Weight: 113 kg/pc.

Condition: used, Measuring transducers, power measuring transducers, active power measuring transducers, analog converters, frequency/analog converters, frequency dividers, isolating converters, signal converters, isolating converters, switching amplifiers, isolating switching amplifiers -Manufacturer: Pepperl Fuchs, switching amplifier K-System unused in original packaging Nwsdoqufr Sepfx Aiuek -Type: KHA6-OT1/Ex2 20058S -Part No.: 20058S -Dimensions of box: 120/95/H25 mm -Weight: 0.2 kg

Condition: good (used), 4. Axle for DMU 80/100/125 Was installed on a DMU125 and is in perfect working order. Njdjzkqc Ujpfx Aiuewk

Condition: good (used), Rilecart Linea F-500 Perforator This machine is in very good condition and ready to use. Electric drive, foot pedal control. Includes a 3:1 perforation tool, 4x4mm hole and a cutout for the hanger. The tool is divided into 3 independent modules. Manufacturer’s description: Perforating machine with a working width of up to 530 mm Nwedezlactopfx Aiuek Designed for continuous operation and heavy loads Foot pedal-activated operation Perforation of up to 40 sheets (2.5 mm) in a single cycle Quick and easy replacement of perforation strips Available with or without a cutout for the hanger 380V power supply Weight: 195 kg

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (at tel. number). Greentec HS 212 Branch Cutter / incl. MS08 adapter plate / NEW unit / in stock & immediately available Price: €6,290.00 net / €7,485.10 gross - Working width: 2,100 mm - Cuts per minute: 250 - 450 - Max. branch diameter: 60 mm - Oil flow: 50 l/min - Pressure: 190 bar - Working speed: 5 km/h - Weight: 132 kg Optional: Flow divider with pressure relief valve - freely adjustable (50-90 l/min at 190 bar) = €660.00 net Description: - Clean and smooth cut of small branches and larger limbs up to max. 60 mm diameter - Sturdy frame beam made of high-strength steel - Lightweight construction - Low weight and flat housing for optimal visibility - HIGH-POWER blade drive via planetary gearbox with constant torque during direction changes - 100% linear blade movement thanks to a cast iron constant power motor - Max. 450 cuts per minute - PRO CUT blade (Made in Germany) - Fine-toothed double-cut blades (ground on both sides) increase both the surface quality and the working capacity - Special blade guide made of wear-resistant plastic ensures smooth operation and long service life - Blade fingers with branch-saving function = remaining branches are not damaged - Long service life thanks to hardened and galvanized material - Easy and quick blade change Nwsdezk S Tbspfx Aiujk - Sliding skid prevents damage from ground contact - Minimal wear and low maintenance - High working speed up to 5 km/h - Variable mounting position of the blade bar - Required hydraulic connections: 1x DW (1x supply + 1x return) Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. In our warehouse, we have a very large selection of various Greentec products that are immediately available! Mr. Herden (tel. number) will be happy to assist you. On request, we will also be happy to provide you with a financing offer. We are an official Westtech sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We will supply you with the complete Seppi M. range! Errors and prior sale excepted! = Further information = New: Yes Part suitable for: Application forestry Please contact Marius Herden for more information.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,800 kg, maximum load weight: 27,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,810 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,020 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, color: original, Year of construction: 2026, Customized transport solution Configure your Fliegl trailer according to your requirements. The vehicle shown is an example only. Production and equipment are customized according to customer specifications. # Chassis Heavy-duty HANGLER welded construction made of high-quality steel with tapered welded main beams and reinforced neck section with double centre web. Punched Z-profile cross members with welded side frame. Replaceable 2" kingpin with chamfered skid plate. 18 pairs of recessed lashing rings (2.5 t each) and 8 pairs of recessed folding lashing rings (5 t each). 24 t two-speed landing gear, one-side operation. 2 wheel chocks with holders. Aluminium side underrun protection. Plastic mudguards in front of and behind each axle with anti-spray mud flaps. Rear underrun protection and full-width rear mud flap. Approx. 8,000 mm covered coil well divided by approx. 40 mm inclined loading beams. Stake pockets and supports for FR 80/80/4 stakes, fully hot-dip galvanized. 80/80 plug-in stakes with reinforced lower section. Nwodpfxsi Riw Ho Aiuok Hydraulic inclined loading system with 4 cross beams. Hydraulic supply via tractor through a 2-line hydraulic system (pressure/return) with double Faster couplings. Inclined loading beams with integrated height-adjustable telescopic extensions. Multi-stage hydraulic cylinders with universal joints. Adjustable supports with locking pins. Cylinder openings protected by strip brushes against dirt and weather. 5-function control valve for inclined loading system and folding mechanism. Sliding roof system with tarpaulin apron cover. 1 tank-end support set with height-adjustable support pins for different tank diameters, including storage bracket. Front impact stop for inclined loading platform. # Axles + Suspension Disc brake axles Offset axle spacing 1,310 / 1,450 mm Air suspension # Brake system Dual-line compressed air braking system Aluminium air tanks Spring parking brake Axle load detection via EBS CAN bus Tyre Pressure Monitoring System (TPMS) according to ECE R141 with display in the towing vehicle via EBS # Wheels and tyres 435/50 R19.5 tyres # Electrical system 24 V electrical system Multi-chamber lighting Yellow LED side marker lights Flashing LED side marker lights synchronized with turn indicators 2 × 7-pin and 1 × 15-pin front sockets Additional 7-pin rear socket (ISO 1724) integrated into the underrun protection Double LED illuminated warning panels, extendable to 3,000 mm, removable with plug connection LED rotating beacon with holder, switched via parking lights # Floor Approx. 30 mm phenolic plywood floor, flush-mounted with the side frame # Front wall Fixed aluminium hollow-profile front wall, approx. 2,400 mm high, with timber slats above. Interior reinforced with 3 mm aluminium wear plate up to approx. 630 mm from floor level. # Posts 2 fixed front volume corner posts, approx. 2,400 mm high 3 pairs of Kinnegrip centre posts, approx. 600 mm high, with Kinnetop extension to approx. 2,000 mm 1 pair of removable and foldable rear corner posts made of aluminium hollow profiles, approx. 600 mm high, reinforced internally up to the first slat row Integrated curtain bow recess with two rows of curtain bows. # Roof EDSCHA Profi 95 sliding roof system with straight roof frame and steel scissor mechanism for full curtainsider tarpaulin. Mechanically adjustable roof.

Condition: excellent (used), functionality: fully functional, Milling machine Saimp model FU-P2. Machine complete with axis display and dividing head. Used. Nodpfxsy N T Ums Aiuswk

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey, overall weight: 600 kg, loading space width: 2,400 mm, loading space length: 3,000 mm, loading space height: 2,600 mm, Equipment: lighting, Turnkey assembled, in stock & available for immediate delivery Dimensions: Length: 3.0 m Width: 2.4 m Height: 2.6 m Njdpfoy Egt Ijx Aiujwk External area: 7.2 m² Insulation thickness: 5.0 cm Colours: Panel: RAL 7016 (anthracite) Base frame: RAL 7016 (anthracite) Wood cladding: RAL 7016 Weight: 600 kg Door: 1x PVC glass door, double glazed Windows: none Electrical installation: In accordance with VDE standard 3-phase, 32A CEE plug (red) 2x double sockets Lighting: 1x lamp 1x light switch Air conditioning: Split unit for heating and cooling, included in the price ----- Optional additional equipment (for an extra charge): Double-wing doors: For wider access and greater transport options. Additional doors: Flexible access points. Additional windows: Increased ventilation and daylight. Additional double windows: Improved thermal and sound insulation. Additional floor-to-ceiling windows: Modern design and generous lighting conditions. Roller shutters: Privacy and sun protection for adjustable light control. Glass façade: Bright appearance with fully glazed front. Woodstyle façade: Timber-look finish for a warm and aesthetic appearance. Divided rooms: Flexible usage options thanks to additional room separation. WC: Integrated sanitary facility for greater comfort. Shower: Addition to sanitary unit, ideal for longer stays. Air conditioning: Additional heating and cooling functions. Insulation: Choice of 50 mm, 60 mm, 80 mm, 100 mm or 120 mm. Forklift pockets: For easier transport with forklifts. ----- Delivery: Nationwide delivery with crane vehicles available. To calculate a delivery price, please provide your postal code. Delivery time: 1-4 weeks, depending on distance and availability (standard containers or custom builds).

Condition: used, empty load weight: 19,890 kg, maximum load weight: 10,110 kg, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 10/2008, next inspection (TÜV): 08/2026, suspension: air, tire size: 295/60R22.5, color: silver, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, parking heater, Vehicle location: Bovenden, air conditioning, auxiliary heater, alloy wheels, 2 axles, air suspension, trailing-steered rear axle, lifting and lowering mechanism, ABS (anti-lock braking system), interior lighting, side door on the right, side door on the left, dual tires. Njdoyq S Akopfx Aiujwk Superstructure: 2-axle box semi-trailer with extensions on the left and right. Total interior length: 10180 mm, divided into 7260 mm at the rear and 2920 mm at the front. Width: 4490 mm, height: 2115 mm. The semi-trailer was used by the professional association for the electrical industry as a training room! Generator with 189 kVA for autonomous operation/living, 2 x auxiliary heaters, projector, approx. 4,550 mm exterior width, total length 12,760 mm, original new price of the complete vehicle combination approx. €970,000.00! A major summer service (filters, air conditioning, underbody, etc.) was carried out in 09/2025 for approx. €18,500.00! For sale only as a complete unit with serial number Szm-89270! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,200 kg, maximum load weight: 8,600 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 7,300 mm, loading space width: 2,480 mm, total length: 9,490 mm, total width: 2,550 mm, total height: 3,900 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Type: TPS 118 Logistics Semi-Trailer Chassis: Central Axle Trailer Outer frame slightly inclined, new design with "Load-Lock profile" for securing tie-down straps 2-speed gear support leg at the front Plastic toolbox Platform height: 1080 mm Coupling: Central axle trailer Drawbar with tested 40 mm drawbar eye, logistics version Drawbar mechanically adjustable in height via threaded spindle, below floor level, max. adjustment range 200 mm Drawbar mechanically adjustable in length from approx. 1950 - 2300 mm, can be mechanically locked at approx. 50 mm intervals, drawbar length set to approx. 2100 mm Axles & Suspension SAF/BPW axles, selectable by the manufacturer "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension Braking System 2-line pneumatic braking system Spring-loaded parking brake Duomatic connection at the front, with connection line to the towing vehicle 24 Volt EBS, electronic braking system with EBS plug at the front, with connection cable with raising and lowering valve Vehicle - Driving Stability System Wheels and Tires 4x 235/75 R17.5, brand selectable by the manufacturer 4x steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pin plug at the front, with connection cable Floor Sieve-printed panels, approx. 30 mm thick, for high point load capacity Platform length: approx. 7,300 mm Superstructure Front wall / corner posts at the front Through-loading system with front portal doors, 2-leaf, each with 2 internal rotary bolt locks, corner posts made of steel, release mechanism for side tarpaulin Ramp, approx. 2,400 mm wide, 1 x divided, approx. 350 mm long for resting on the tailgate, load capacity approx. 1,800 kg, incl. support for the tailgate (drawbar length then approx. 2100 mm, for tailgate length of 1800 mm, the coupling offset from the truck must be at least 20 to max. 240 mm). Note! Usable internal length is reduced by the ramp! Side Walls Center Rails 2 pairs of sliding rails that can be moved along the entire length, with 4 pockets and a long pocket at the bottom Insert strips 5 rows of wooden insert strips (in combination with side walls, 4 rows) Rear Wall / Corner Posts at the Rear Corner posts at the rear made of steel, extending to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-leaf, each with 2 internal rotary bolt locks Tarpaulin Tarpaulin with welded-in horizontal and vertical straps Tensioning fasteners made of stainless steel Nodpfezcp E Tjx Aiuowk Customer lettering on side tarpaulins and rear portal possible Roof Sliding tarpaulin, rear end lift that can be folded up, with the tarpaulin sliding from back to front, tarpaulin color: white Optimal rain gutter at the rear, above at the end beam, above the doors Country of Registration / License Plates Germany with Dekra approval and certificate (according to §13 EG - FGV) Fliegl manufacturer certificate for the structural strength of the superstructure according to EN 12642 XL prepared for single-line license plate holder Reflective strips: white, continuous on the bottom of the side tarpaulin and at the top in the corners Reflective strip

Condition: good (used), Year of construction: 2015, CNC milling machine, milling and engraving machine, MECANUMERIC, MECA EASY 1510 – used: Price ex works: €23,500 (net)! Manufacturer: MECANUMERIC Type: MECA EASY 1510 Year of manufacture: 2015, former DEMO MACHINE Three-axis milling machine in a flat-bed gantry design. Working travels X, Y, Z axes: 1,050 / 1,550 / 200 mm. Table frame and gantry: Designed as a solid, stress-free, fully welded steel structure, powder-coated. Heavy table substructure for mounting the vacuum table VAC-CAISSON, designed as a cassette, with air passage holes in a 10 mm grid. Feed rate: 300 mm/sec (18 m/min) in rapid traverse and feed mode! Guidance on rails, slide shoes with upstream ball screw. Transmission: Precision ball screws Ball screw on all axes Maintenance-free, brushless servo drive motors (750 W on X and Y, 300 W on Z) Repeat accuracy: +/- 0.025 mm Mechanical resolution: 0.0006 mm Numerical control: Mecanumeric CN 7000 ISO-G-Code Machine operation via a 10" touch screen display Complete documentation and CE declaration of conformity in accordance with the basic safety and health requirements of Vacuum table 1,020 x 1,500 mm Support/work table designed as a closed aluminum plate, on which vacuum passage holes are arranged in a 10 mm grid. The table is divided into 2 main areas, which can be switched on manually. Vacuum generation by one (1) two-stage high-performance vacuum side-channel compressor. Motor power 4.5 KW, suction capacity 320 m/hour, filter and silencer included. Due to the overall size and potential heat development, the pumps are housed outside the machine body. The electrical control and safety devices for the pump and valves are integrated in the machine control cabinet or on the control panel. Milling spindle HF40-ATC24 ENC Conversion Module APSG-A Vacuum generation by one (1) two-stage high-performance vacuum side-channel compressor. Motor power 4.5 KW, suction capacity 320 m/hour, filter and silencer included. Due to the overall size and potential heat development, the pumps are housed outside the machine body. The electrical control and safety devices for the pump and valves are integrated in the machine control cabinet or on the control panel. High-frequency motor milling spindle 4KW Power: 4KW Speed range: up to 24,000 rpm. Fast tool change with pneumatic ejection, ISO30 taper. Tool holder: Clamping diameter up to 2-16 mm. Cooling with compressed air 6 bar 20 m/h Converters and switching elements are included in this position. Safety enclosure for the machine Front with door and safety lock - Position PROTCHOC omitted - Nwjdpfxszbybie Aiusk Preparation of the electrical control and switching elements as well as the output socket for a high-performance industrial vacuum cleaner. Changer CH 6 S Condition: good Available: immediately Location: Delmenhorst

Condition: repair required (used), functionality: limited functionality, year of last overhaul: 2025, type of input current: three-phase, input voltage: 400 V, Roll divider WP Rotamat EN Dough dividing and rounding machine Stationary machine, 30-piece capacity, ideally suited for dividing and rounding dough with a plastic knife head, for round 70g and square 80g rolls Njdpfozbz Ecex Aiujwk Connection: 400 V, 16A CEE plug Dimensions: 650 x 670 x 1610 mm (W x D x H) Used machine (Rounding plate bearing is defective and should be replaced)

Condition: excellent (used), Year of construction: 2003, 270 USED Pretzel elongation and production line. TECHNICAL DATA: - Capacity: 1500 pieces/h, Nodpfxsydd Ras Aiujwk - Power: 400 V, 3.5 kVA NOTE: A WP Multimatic divider-rounder is available as part of the set (price: €5,000 net). The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: reconditioned (used), functionality: fully functional, overall weight: 500 kg, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 06/2027, Dough divider and molding machine TOP bread roll press Fortuna Automat A 3 H + with molding stop function Head cleaning towards the rear Dough divider head newly revised with stainless steel blade NEW Dough weight up to 2400g robust technology Connection 400V, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm Used machine, overhauled Quality from a specialist company! Nsdpfx Ajygcw Reiuswk Benefit from over 35 years of experience! Options: Stainless steel platform New molding plate Service package Maintenance contract Training and commissioning Delivery service We have a large selection of dough dividers in stock!

Condition: good (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 07/2027, type of input current: three-phase, Roll Divider and Rounding Machine Fortuna Automat A 3 H Nwodpjygdcuofx Aiuok Dough dividing and rounding machine Roll press Fortuna Automat size 3 Head cleaning to the rear Very robust construction With 3 rounding plates Connection: 400V, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm Used machine We have many other roll presses in stock!

Condition: used, Year of construction: 2003, Overview This complete filling line for non-returnable glass bottles was manufactured 2003 by several well-known European producers, mainly Sidel. The line is designed for high-capacity beverage production, handling up to 40,000 b/h and is in a good condition and designed for 3-shift 24/7 operation.  Technical Data - Capacity: 40,000 bph (at 0,25L) - Bottle Formats: 0.25L, 0.33L, 0,5L - Packaging formats: • 4x6 x 25cl • 1x12 x 25cl • 24x25cl • 24x30cl • 4x6 x 33cl • 6x4 x 33cl • 1x12 x 33cl •24x33cl • 20x50cl  - Application: beer, CSD, or other beverages in non-returnable glass bottles - Hygienic design - Automated change-over  Scope of Delivery Nsdpoyb Tucefx Aiujwk Pallet Transport (Depalletiser) | Sidel / SIG Simonazzi / GEBO | 2003 | SWEEP-OFF/B Bulk Depalletiser | Sidel / SIG Simonazzi / GEBO | 2003 | SWEEP-OFF/B  Pallet Transport (Palletiser) | Sidel / SIG Simonazzi | 2003 | LINEAR Tray and/or Carton Palletiser | Sidel / SIG Simonazzi | 2003 | LINEAR Pallet Shrinkwrapper | Sidel / SIG Simonazzi / MSK | 2003 | ECONOTECH/TOWERTECH Pallet Labeller | Sidel / SIG Simonazzi / Logopak | 2003 | LOGOMATIC 920 II PF Basket Erector | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLA Fourpack Transport and Divider | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLW Basket Inserter | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLE Carton Packer | Sidel / SIG Simonazzi / FANUC | 2003 | ROBOKOMBI Carton Closer | Sidel / SIG Simonazzi / Bortolin | 2003 | MARA H.M Carton Marker 1 | Sidel / SIG Simonazzi / Domino | 2003 | A-Serie Inkjet Printer Carton Marker 2 | Sidel / SIG Simonazzi / Domino | 2003 | A-Serie Inkjet Printer Weight Checker | Prisma | 2003 | 10D3 Full Carton Inspection | BBull / Centro Kontrollsysteme | 2015 | Image VKK 500 Bottle Conveyors | Sidel / SIG Simonazzi | 2003 | TRANSPORT Carton Conveyors | Sidel / SIG Simonazzi | 2003 | TRANSPORT Crown Cork Feeder | Sidel / SIG Simonazzi | 2003 | SM80 Rinser | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP Filler | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP Crowner | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP C.I.P. | Sidel / SIG Simonazzi | 2003 | AUTOSAN Fill Height Control | Sidel / SIG Simonazzi / Heuft | 2003 | SPECTRUM TX Tunnel/Bottle Pasteuriser | Sidel / SIG Simonazzi | 2003 | PAMA CLD 50/144 Bottle Coding on Necklabel | Mundi-Technology | 2015 | Mundiscan UP2000 HE Labeller | Sidel / SIG Simonazzi / Krones | 2003 | Topmodule Type 407 Bottle Inspection & Sorting | Sidel / SIG Simonazzi / Krones | 2003 | Checkmat type 707 Tap tone | Sidel / SIG Simonazzi / Krones | 2003 | TapTone 500 Series

Condition: good (used), gear, gears, gear shaft, pinion shaft, spur gear, spur gear -Gear shaft: straight-toothed pinion shaft, 2 pieces -Gear: Diameter Ø 48 mm / 22 teeth -Tooth width: 10 mm -Shaft mount: Ø 18/16 mm / Ø 19/16 mm Nwsdpfxswq U Uko Aiusk -Dimensions: see photo -Shipping/Price: complete -Transport dimensions: 92/48/H70 mm -Total weight: 0.8 kg

Condition: new, Machining center with 4 CNC-controlled axes for machining profiles made of aluminum, PVC, and steel Comparable to Emmegi, Elumatec, Fom, Pertici, etc. Machine frame in a stable welded construction, stress-relieved by annealing, with hardened linear guides Protective cabin covering the entire machining length Pneumatically opening protective door Milling spindle: 3.8/4.6 kW S1/S6 3.0/3.7 Nm S1/S6 max. 18,000 rpm, air-cooled with ISO 30 tool holder with minimum quantity lubrication system for the tools with level monitoring Tool magazine: 5 positions, on the left side in the machine bed, for holding drilling, milling, threading tools, angle head, and disc cutters up to Ø 150 mm Workpiece clamping: 4 pneumatic profile clamps, clamping range up to 250 mm automatic positioning via device on the Z-axis Workpiece positioning: one pneumatic reference stop each on the left and right on the A-axis Travel distances: X-axis 3500 mm Y-axis 370 mm Z-axis 348 mm A-axis ±90° Travel speeds: X-axis 70 m/min. Y-axis 30 m/min. Z-axis 30 m/min. A-axis 60°/sec Maximum working areas: X-axis 3270 mm Y-axis 250 mm at 0°, 116 mm at ±90° of the A-axis Z-axis: 170 mm at 0°, 200 mm at ±90° of the A-axis Operating software: CAD/CAM in 3D technology (option, included!) Programming system according to ISO standard Functionality: Linear and circular interpolation on two axes (X-Y) Three-sided machining by swiveling the A-axis 90°-0°-90° End face machining using disc cutters Operating modes: One profile bar over the entire machining length Two profile bars in divided machining length Lubrication system: Automatically controlled central lubrication for all axes, ball screws, and guides, with level monitoring Operation: 18.5" TFT Mouse + keyboard Connection data: Electrical: 400 V/50 Hz (3-phase + N + PE), 16 A, Delivery without power cable Pneumatic: Pressure 6 - 8 bar Nwodpjwrcwpjfx Aiuok Dimensions and weight: Length: 5800 mm Width: 1640 mm Height: 2000 mm Weight: 2000 kg incl.: Graphical programming software CM3D/CAD3D Barcode reader Teleservice with remote maintenance/diagnosis for 1 year after commissioning

Condition: used, Year of construction: 1989, x-travel 350 mm y-travel 200 mm z-travel 350 mm table surface area 700 x 280 mm spindle taper SK 40 150 - 1660 U/min feeds 25 - 285 mm/min rapid traverse 1 m/min quill stroke 80 mm milling-head swivable +/- 45 ° Nodevzhidspfx Aiuowk total power requirement 3 kW weight of the machine ca. 1,2 t dimensions of machine L x W x H 1,27 x 1,1 x 1,65 m Accessories: vertical head with quill retraction, solid table, univ. table, rotary table 250 mmø, dividing unit with 3-jaw chuck 135 mmø, counter bearing, various tool fixtures, drill chuck, coolant

Condition: used, Year of construction: 1978, Technical details: Pressure: 160 t max. ram stroke: 500 mm distance table/ram: max. 2880 mm ram speed - forward: 0,03 m/sec ram speed - reverse: 0,04 m/sec ram surface area: B: 1720 x H: 1000 mm ram diameter: Ø 259 mm ram hole: Mitten-Loch: Ø180 mm operating pressure: 260 atü bar total power requirement: 11,0 kW weight of the machine ca.: 18,8 t dimension machine xH: 7,5 x 1,6 x 1,6 m HYDRAULIC HORIZONTAL MULTI-PURPOSE PRESS TÜV test until 02/2024 Nsdpfxju Nfq Ej Aiuewk Details of the counter frame: Size W: 1720 x H: 690mm Counter support U-support = Ø 225mm x depth = 450mm Manual horizontal displacement: max. length 2880mm Information on the guide cylinder: 2 cylinders opposite each other; size Ø230mm x length 3350mm, 7 cylinders divided by adjustment groove Ø 170x 50mm, can be moved manually with adjustment ring Information on the mounting bed: Steel construction, welded with 2 guide grooves 20mm; size LxWxH: 4000 x 1400 x 200mm *

Condition: used, Technical details: Nwsdsu N Dz Aepfx Aiusk table diameter: 315 mm rotatability of the table - manual/mechanic: 360 ° weight of the machine approx.: 100 kg dimensions: 620 x 530 x 135 mm The tables were rarely used other features: -with radial scale -surface is finished -center mounting MK3 -dividing circle 19 / 27 / 31 / 41 / 49 / 59 -operation also possible by machine via coupling on both sides (switchable right-/left-hand rotation with automatic changeover) -foot clamping: support size 360 x 420mm with 1 clamping groove on the front side 16 x 200mm *

Condition: good (used), Dividing head, spiral milling device, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, V-belt drive -Manufacturer: Stankoimport, V-belt drive for tool grinding machine -Type: 36642.M17 -Belt width: 10 mm -Dimensions/recording: see photos -Dimensions: 188/135/H160 mm -Weight: 5.6 kg Njdpfx Aiexfh A Iouowk

Condition: excellent (used), gear, gears, gear shaft, pinion shaft, spur gear, spur gear -Gear shaft: straight-toothed pinion shaft -Gear: Diameter Ø 136 mm / 37 teeth -Tooth width: mm -Shaft holder: inner Ø 72 mm -Bolt circle: Ø 100 mm M8 -Dimensions: see photos -Number: 6x gear shaft available Nedexf A Eqepfx Aiuswk -Price: per piece -Dimensions total: Ø 136 x 42 mm -Weight: 5.2 kg/piece