Used Dmu 50 for sale (201)

Condition: ready for operation (used), Year of construction: 2005, operating hours: 39,256 h, functionality: fully functional, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller model: Heidenhain iTNC 530 , rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range X-axis: 780 mm Travel range Y-axis: 560 mm Travel range Z-axis: 560 mm B-axis, infinitely adjustable: 150° (-120°/+30°) Rapid traverse rate (X / Y / Z): 50 m/min Feed rate: 20 - 15,000 mm/min Spindle speed (max.): 12,000 rpm Main spindle drive power: 28 / 19 kW Max. torque: 125 Nm Tool interface: SK 40 Number of pallets: 2 Isdpfx Abszcqa Sjvoic Pallet size: 630 x 500 mm Max. load: 400 kg Table speed range: max. 30 rpm Number of tool positions: 120 Max. tool diameter: 80 mm Max. tool diameter with free adjacent tool pocket: 160 mm Max. tool length: 315 mm Max. tool weight: 8 kg MACHINE DETAILS Control system: Heidenhain iTNC 530 Total power consumption: 64.2 kVA Dimensions & Weight Footprint: approx. 7.0 x 7.0 x 2.8 m Machine weight: approx. 12.0 t Operating Hours Operating hours: 39,256 h Power-on hours: 72,107 h EQUIPMENT Chip conveyor Coolant system High-pressure cooling 40 bar through-spindle coolant Paper band filter Pallet changer, 2 positions Tool breakage monitoring According to the seller, the spindle was presumably replaced. However, no service report is available to confirm this. The machine's data storage was renewed in January 2026. No CE declaration of conformity is available in DIN A4 or PDF format.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 15,869 h, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 E, spindle speed (max.): 12,000 rpm, number of axes: 4, This 3-axis DMG DECKEL MAHO 1035V was manufactured in 2006. It features an X-axis travel of 1,035 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine is equipped with a Heidenhain iTNC 530 control unit and has a tool magazine capacity of 30 positions. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO 1035V vertical machining centre we have for sale. Contact us for further details. Iiedpfx Absy Uvnyjvjc - PLC Software-Nummer: 4B0000_HEDR_02C- Development status: L3- DSP1: 340514 03.1- ICTL1: 340517 01- Control On Time: 40,697 hours- Machine On Time: 38,700 hours- Program Run Time: 15,863 hours- 1st Axis Reference Point Time: 14,213 hours / 15,835 hours- Tool Changer Cycles Time: 1,585 hours- Spindle Taper: SK 40- Tool Magazine Capacity: 30 positions (Chain type)- Touch Probe: Heidenhain TS640- Electronic Handwheel: Heidenhain- Power Capacity: 35 kVA- Maximum Nominal Current (A Jn max): 50 A- Fuse / Input Current: 63 A- Mains Voltage: 400 V- Frequency: 50/60 Hz- Control Voltage: 230 V- Direct Current Supply: 24 V- Central Lubrication System: Vogel pump unit utilizing Divinol Lithogrease 000 fluid grease- Pneumatic Regulation Assembly: Integrated SMC / Festo air filtration and regulation unit

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, DECKEL MAHO DMF 220 linear Machine Type: Vertical CNC Machining Center Manufacturer: DECKEL MAHO Model: DMF 220 linear Control System: Siemens 840D ShopMill Technical Specifications - X-axis travel: 2,200 mm - Y-axis travel: 560 mm - Z-axis travel: 720 mm - Table size: 2,600 × 600 mm - Table load capacity: 2,200 kg - Tool holder: SK40 / HSK-A63 DIN 69893 - Spindle speed: 20 – 18,000 rpm - Feed rate: up to 20,000 mm/min - Rapid traverse X-axis: 100 m/min - Rapid traverse Y/Z-axis: 50 m/min - Tool magazine: 30 positions - Spindle hours: approx. 7,086 h - Idle running hours: approx. 24,652 h - Total power requirement: approx. 70 kVA - Machine weight: approx. 12.5 tons Iiodpjzd T T Njfx Abvjc Equipment & Features - Mineral cast machine bed - Chip conveyor with coolant tank - Cooling lubricant unit with compact filter system - AC servo drives on X, Y and Z axes - Hydraulic/mechanical tool clamping - Linear measuring system on all axes

Condition: used, Year of construction: 2002, x-travel 2.200 mm y-travel 560 mm z-travel 720 mm control 840 D Powerline ShopMill Siemens Main spindle: turning speed range - main spindle 20 - 12.000 min/-1 power capacity - main spindel 35 / 25 kW max. Torque 130 / 87 Nm tool taper SK 40 internal coolant system feed 40 bar work table: table surface area 2.600 x 600 mm max. table load 2.200 kg number of T-slots 6 T-slot - width 18 H7 mm T-slot - distance 100 mm Tool-Presetter: number of toolpositions 30 pos. max. tool length 300 mm max. tool weight 6 kg max. tool diameter 80 / 125 mm feeds: feed speeds 20.000 mm/min input unit 0,01 mm rapid traverse ( X / Y / Z ) 100 / 50 / 50 m/min measuring system Resolution 0,001 mm total power requirement 60 kVA weight of the machine ca. 12,5 t dimensions of the machine ca. 6,0 x 3,7 x 2,9 m CNC - Machining Center Vertical DECKEL MAHO - DMF 220 linear Iiodpfx Abotqmr Rsvoc - from individual part production (aluminium, brass and stainless steel) - incl. workroom wall - M26 function (switching to blown air through spindle center) - new ball screw Z-axis incl. bearing (April 2015) - new milling spindle (2016) - Spindle hours: ca. 11,966 h - WITHOUT vices

Condition: like new (used), Year of construction: 2022, operating hours: 12,719 h, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 800 mm, feed length Z-axis: 850 mm, nominal power (apparent): 21 kVA, controller manufacturer: Heidenhain TNC 640 mit CELOS, workpiece weight (max.): 2,000 kg, total height: 3,200 mm, total length: 4,500 mm, total width: 7,100 mm, table width: 850 mm, table length: 2,350 mm, rotational speed (min.): 15,000 rpm, spindle speed (min.): 15,000 rpm, Year of construction: 2022 CNC controller: Heidenhain TNC 640 mit CELOS Axes X-axis travel mm: 2000 Y-axis travel mm: 800 Z-axis travel mm: 850 C-axis degrees: 360º (0,001) B-axis degrees: ±120 Rapid traverse m/min: 50 Acceleration in the axes m/s2: 5 Worktable Table dimensions mm: 2350x850 Max. workpiece weight kg: 2000 Milling/turning table nc: Table dimensions mm: Ø800 Max. workpiece weight kg: 800 Table rotation speed rpm: 50 Spindle Spindle speed rpm: 15000 Spindle drive power kW: 21/16 (40%ED/cont) Iiodpfxjy Shgvs Abvsc Spindle torque Nm: 111/85 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: SK 40 Tool magazine slots: 40 Tool changer: Double gripper With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 400 Max tool weight kg: 8 Chip-to-chip time s: from 7,5 Equipment Chip conveyor Rigid table with integrated rotary table Infrared probe Internal cooling lubricant supply Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Mist collector NC swivel rotary table Preparation for the use of the 3D quickSET MPC – Machine Protection Control Automatic door Automation interface Machine running times Under power: 18669 Spindle Working: 12719 Basic machine dimensions / weight Length mm: 4500 Width mm: 7100 Height mm: 3200

Condition: used, Year of construction: 2003, x-travel 2.200 mm y-travel 560 mm z-travel 720 mm control iTNC 530 Heidenhain turning speed range - milling 20 ~ 12.000 U/min tool taper SK 40 power capacity - milling spindle 35 / 25 kW tool piece magazine with 100 pos. table surface area 2.600 x 600 mm rapid traverse X-axis 100 m/min rapid traverse Y-axis 50 m/min rapid traverse Z-axis 50 m/min max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg max. table load 2.200 kg total power requirement kW Iiedpfx Abstumqvsvjc weight of the machine ca. 12 t dimensions of the machine ca. 7,0 x 4,2 x 2,7 m Travelling column milling machine DECKEL MAHO - DMF 220 Linear - new spindle installed (April 2024) - incl. 4th Axis 560mm and tailstock (center height 350mm)

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 220 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, overall weight: 12,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, spindle nose: SK40, number of slots in tool magazine: 32, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMF 220 linear, manufactured in 2001 X-axis travel: 2,200 mm Y-axis travel: 560 mm Z-axis travel: 720 mm Control system: Siemens 840 D Spindle speed range - milling: 20 ~ 12,000 rpm Tool holder: SK 40 Drive power - milling spindle: 35 / 25 kW Tool magazine with 32 positions Table surface area: 2,600 x 600 mm Rapid traverse rate X-axis: 80 m/min Rapid traverse rate Y-axis: 50 m/min Rapid traverse rate Z-axis: 50 m/min Ijdpfx Abozar Sqevoic Max. tool length: 300 mm Max. tool weight: 6 kg Max. table load: 2,200 kg Chip conveyor IKZ-40 bar Renishaw OP60 Total power consumption: kW Machine weight: approx. 12 t Space requirement: approx. 7.0 x 4.2 x 2.7 m

Condition: used, Year of construction: 1997, x-travel 660 mm y-travel 500 mm z-travel 600 mm table surface area 630 x 500 mm spindle taper SK 40 Iiedpfx Abeyg N Snjvoc spindle turning speed range 20 - 6.300 U/min feeds 30 m/min control PHILIPS CNC 532 internal coolant system feed 40 bar total power requirement 50 kW weight of the machine ca. 13,3 t with rotary pallet changer and hydr. swivelling head (horiz./vert.) Accessories: chip conveyor, coolant

Condition: ready for operation (used), Year of construction: 2007, operating hours: 20,082 h, travel distance X-axis: 700 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 10,000 rpm, number of axes: 4, This 4-axis DECKEL MAHO DMC 70 H duoblock was manufactured in 2007. It features a Siemens 840D control unit and a robust tool holder type of SK40. The machine is equipped with hydraulically clamped clamping towers, ensuring secure workpiece handling. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 70 H duoblock horizontal machining centre we have for sale. Contact us for further details. • Apparent power: 60 kVA • Nominal current (max): 86 A • Fuse protection: 100 A • Voltage: 400 V • Frequency: 50 Hz • Control voltage: 24 V Iijdpfx Abey Ndibovjc Additional equipment • 2 hydraulically clamped clamping towers (workholding) Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2009, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, Offered here is a used machining center from the manufacturer Deckel Maho DMG. The machine is powered up and can be inspected at our facility. Free loaded on truck Manufacturer: DMG Deckel Maho Model: DMC 125 H duoBlock Year of manufacture: 2009 Control: Siemens 840 D Solutionline (PCU 50) Iijdjw Ew T Sspfx Abvoc Technical data: Travel distances X-, Y-, Z-axis: 1250 x 1000 x 1000 mm Feed rate X-, Y-, Z-axis: 20 - 60,000 mm/min Rapid traverse X-, Y-, Z-axis: 60 m/min B-axis travel: 360 x 0.001° B-axis feed rate: 10,800 °/min Max. rotation of table plate: 30 rpm Spindle speed: 20 - 8,000 rpm Gear stages: 2 Max. workpiece diameter: 1250 mm Max. workpiece height: 1580 mm Clamping surface: 800 x 800 mm Max. workpiece weight: 1,500 kg Weight of pallet: 570 kg Max. permissible weight difference for pallet loading: 1,000 kg Tool holder: SK 50 according to DIN 69871 Max. tool length: 650 mm Tool magazine: 120 positions Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of machine (without magazine or other accessories): approx. 20,000 kg Space requirement: approx. 7,000 x 6,000 mm Total machine weight: 24,000 kg Accessories: Chip conveyor with coolant tank Coolant system 4x machine pallets Tool magazine Oil mist extraction Various new spare parts: 1x Length measuring system Y-axis (new) 1x Lubrication unit 230V 0.12 30 bar (new) 1x ZAHNRADP-AGG*MKF1-KW2-20036 (new) 1x Cyclo gearbox *F1C-A25 (new) 1x Conversion kit power module (new) 1x Lifting devices for the machine

Condition: ready for operation (used), Year of construction: 2001, operating hours: 8,200 h, functionality: fully functional, machine/vehicle number: 28850018432, TECHNICAL DETAILS Tool diameter: max. 140 mm Speed at maximum diameter, max.: 6,500 rpm Balancing quality according to DIN ISO 1940: G 6.3 Tool Magazine Number of tools: 24 Iijdpfx Aoy Rta Eebvoc Tool diameter, standard tools: max. 80 mm Tool diameter, special tools with adjacent positions free: max. 140 mm Tool length: max. 300 mm Tool weight: max. 7 kg Magazine load: max. 72 kg Table Clamping surface with T-slots DIN 650-14: 800 x 500 mm Loading height, top of table: 850 mm Workpiece height: max. 240 mm Table load capacity: max. 500 kg Coolant System Tank capacity with standard chip container: 150 l Tank capacity with spindle cooling: 80 l Pump performance standard, flow rate: 30 l/min Pump performance standard, pressure: 1.2 bar Tank capacity with chip conveyor option: 750 l Pump performance, chip conveyor option, flow rate: 40 l/min Pump performance, chip conveyor option, pressure: 3.0 bar Tank capacity including chip conveyor: 750 l Pump performance, internal coolant supply, flow rate: 30 l/min Pump performance, internal coolant supply, pressure: 15 bar Chip Disposal Chip conveyor discharge height: 850 mm Chip conveyor type: scraper belt MACHINE DETAILS Rated power: 30 kVA Rated current: 42 A Delayed main fuse: 3 x 50 A Operating voltage: 400 V Frequency: 50 Hz Compressed air connection: 6 bar Required system delivery rate: 38 Nm³/h Ambient temperature: +5 to +40 °C Average temperature over 24 h: +35 °C Relative humidity: 30–95 % Dimensions & Weight Transport dimensions of the machine with table (L x W x H): 3.1 x 2.1 x 2.4 m Transport weight: approx. 4,200 kg Mounting elements: 4 x BNV 150/4 EQUIPMENT Fixed station coding Vertical tool changer Pick-up system via work spindle Coolant system Spindle cooling Chip conveyor Internal coolant supply Mounting elements BNV 150/4

Condition: ready for operation (used), Year of construction: 2006, operating hours: 11,900 h, travel distance X-axis: 635 mm, number of axes: 3, This 3-axis DECKEL MAHO DMC 635 V was manufactured in 2006. It features an X-axis travel of approximately 635 mm and operates on a supply voltage of 400 V, 3-phase. With a rated power of 35 kVA, this vertical machining centre is designed for efficient performance. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 635 V machine we have for sale. Contact us for further details. Iisdpfxsyycu Ro Abvsc • Supply voltage: 400 V, 3-phase + PE • Frequency: 50/60 Hz • Rated power: 35 kVA • Rated current: 64 A • Maximum current: 50 A • Control voltage: 230 V AC / 24 V DC

Condition: used, Year of construction: 2004, Deckel Maho DMC 70 V – Vertical Machining Centre Iisdjy R E H Dspfx Abvsc Offered here is a used vertical CNC machining centre Deckel Maho DMC 70 V equipped with Heidenhain TNC 426 control. Technical specifications: Type: Vertical machining centre, 3-axis Travel X/Y/Z: 700 / 500 / 500 mm Table size: approx. 750 x 500 mm Spindle speed: up to 8,000 rpm Tool changer: Chain magazine Control: Heidenhain TNC 426 Operating voltage: 400 V / 50 Hz Manufacturer: Deckel Maho GmbH, Pfronten Condition: Used, on-site inspection possible

Condition: used, Year of construction: 2008, x-travel 1000 mm y-travel 1000 mm z-travel 1000 mm Control Siemens 840D powerline spindle tunring speed 8.000 U/min drive capacity - main spindle 100/40% ED 32/44 kW tool taper HSK-A 100 Isdpfxjxcp R Uo Abveic number of tool places 354 Pos. rapid traverse ( x / y / z ) 60 m/min size of pallet 800 x 800 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features: - NC rotary table with pallet carrier - Rotary pallet changer - 40 bar internal coolant supply - Rotating viewing window - Wall-mounted magazine with 300 magazine positions - Rotating wall tool lock, 30 positions (inactive) and 54 positions (active) - Infrared measuring probe - SK 50 mechanical tool breakage detector - Tool identification - 4-color signal lamp Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: excellent (used), Year of construction: 2008, operating hours: 40,255 h, functionality: fully functional, For sale is a DMG DECKEL MAHO DMF 220 linear, a 5-axis universal travelling-column machining center. The machine was built in 2008 and was modernized / totally retrofitted in 2022 with Siemens Sinumerik 840D Solution Line control. Equipped with 5-axis simultaneous machining license, Siemens Sinamics drive technology, Siemens OP15 Black Operator Panel, MCP control panel and electronic handwheel. Technical data: Manufacturer: DMG DECKEL MAHO Type: DMF 220 linear Machine type: 5-axis universal machining center / travelling-column machining center Year of manufacture: 2008 Control: Siemens Sinumerik 840D Solution Line Modernization / Total Retrofit: Siemens CNC / drive modernization in 2022 5-axis simultaneous operation: License available Serial number: 15115223244 Machine number: 2499093 Travel X: 2,200 mm Travel Y: 560 mm Travel Z: 720 mm Tool taper: SK 40 Table load: 2,500 kg Main spindle speed range: 20 - 14,000 rpm Connected load: 80 kVA Max. rated current: 115 A Fuse protection: 125 A Supply voltage: 400 V Frequency: 50 Hz AC control voltage: 230 V DC control voltage: 24 V Power-on hours: approx. 40,255 h Spindle / working hours: approx. 13,082 h CNC / drive technology: X-axis: Siemens Sinamics 160 A, 2 x SMC20 encoder module Y-axis: Siemens Sinamics 50 A, 2 x SMC20 encoder module Z-axis: Siemens Sinamics 80 A, 2 x SMC20 encoder module B-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module A-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module Spindle axis: Siemens Sinamics 26 kW, 2 x SMC20 encoder module Operator panel: Siemens OP15 Black Operator Panel MCP control panel: Siemens Iiedpjyuzg Hjfx Abvoc Electronic handwheel: Siemens Magazine technology: Magazine A: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine B: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine C: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Software / licenses: 5-axis simultaneous machining license Axis licenses Operator software license Equipment: Integrated swivelling table / trunnion-type table setup Paper band filter unit Coolant / filter unit Electrical cabinet Full enclosure Working area lighting Siemens control panel Condition: Machine in well-maintained condition Modernized Siemens control and drive technology 5-axis simultaneous machining available

Condition: used, Year of construction: 2004, operating hours: 38,958 h, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 90 m/min, rapid traverse Z-axis: 90 m/min, feed length X-axis: 750 mm, feed length Y-axis: 600 mm, feed length Z-axis: 560 mm, nominal power (apparent): 73 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, table width: 650 mm, table length: 950 mm, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 37,462 h, spindle nose: HSK63, number of slots in tool magazine: 30, input voltage: 400 V, We are offering this used Deckel Maho DMC 75 V linear vertical machining center, year of manufacture 2004. Details: Iedpfey Dr Hkex Abvoic Year: 2004 Program run time: 38,958 hours Spindle hours: 37,462 hours Rapid traverse: 90 m/min Travel range X-750/Y-600/Z-560 mm Spindle HSK63 18,000 rpm Tool magazine with 30 stations Direct path measuring system Table size: 950 x 650 mm Heidenhain iTNC 530 External air blast Rated power: 73 kVA Max rated current Jn: 105 A Rated current: 125 A Line voltage: 400 V Frequency: 50/60 Hz Secondary voltage: 230 V Auxiliary voltage: 24 V Accessories: WITHOUT accessories such as tool holders and zero-point clamping system. If you have any questions or need further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 85,355 h, functionality: fully functional, machine/vehicle number: 71.405627, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain Millplus, table width: 630 mm, table length: 500 mm, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 700 mm Travel Z-axis: 600 mm Number of pallets: 2 pcs Pallet clamping surface: 500 x 630 mm Max. load pallet changer (one-sided): 600 kg Max. load pallet changer (double-sided): 1,200 kg Max. table plate rotation: 13.6 rpm Feed rate: max. 15,000 mm/min Rapid traverse speed: max. 40 m/min Set-up operation: 2,000 mm/min Magazine positions: 60 slots Max. tool weight: 10 kg Max. tool diameter: 100 mm Max. tool length: 350 mm Ijdpfx Asyfhahobvoic Measuring System Resolution: 0.001 mm Input increment: 0.001 mm Positioning tolerance: 0.010 mm MACHINE DETAILS Control: Heidenhain Millplus Dimensions & Weight Machine without tool magazine: 8,400 kg Weight of tool magazine (60 tool positions): 600 kg Floor dimensions: 4.50 m × 2.72 m × 2.63 m Electrical Data Rated power: 44 kVA Current consumption, maximum: 64 A Current draw: 80 A Supply voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Operating Hours Power-on hours: 96,878 h Spindle hours: 85,355 h

Condition: used, Year of construction: 2003, x-travel 780 mm y-travel 560 mm z-travel 560 mm tool taper SK40 control HEIDENHAIN iTNC 530 weight of the machine ca. ca.12,5 t required space 3,40 x 3,30 x 2,60 m DECKEL MAHO DMC 60T BJ 2003 Operating hours: 32532.7 The machine DMC 60T (1659) is in very good condition and is ideally suited for precise milling operations thanks to powerful motor spindles, high feed rates, and a flexible tool magazine. All technical details can be found below. Working range Travel distance/ X-axis: 780mm Y-axis: 560mm Z-axis: 560mm Worktables NC rotary table – clamping surface, pallet: diameter 500 x 630 mm Centering bore: diameter 50^H6 20 deep mm Locating bore: diameter 20^H6 20 deep mm Torque of the table at: – 100% duty cycle: 1603Nm – 25% duty cycle: 2813Nm Max. rotation of the table: 30 rpm Feed: 7200 ./min. Permissible table load: 400 kg Tool magazine with magazine Isdowm Rrwjpfx Abvjic SK 40 Feed drive AC servo motors in digital technology for axis X, Y, Z Feed speed X-, Y-, Z-axis infinitely programmable: 20–15000 mm/min. Rapid traverse X-, Y-, Z-axis: 50 mm/min. Setup operation X-, Y-, Z-axis: 20–2000 mm/min Measuring system Resolution | X-, Y-, Z-axis: 0.001mm Input unit | X-, Y-, Z-axis: 0.001mm Position tolerance | X-, Y-, Z-axis: 0.010mm Working area Travel/ X-axis: 780mm Y-axis: 560mm Z-axis: 560mm Spindle main speed: 18000min^-1 Speed Infinitely programmable: 20–24000 min^-1 In setup mode: 20–800 min^-1 Main drive 24000 min^-1: motor spindle without gearbox Speed Infinitely programmable: 20–24000 min^-1 In setup mode: 20–800 min^-1 Weight Machine with tool changer and transport base: approx. 10100kg Installation weight Machine with fixed table and tool changer: max. 11500kg Dimensions Machine: 3.40 x 3.30 x 2.60 m Chip conveyor: 2.77 x 1.00 x 2.07 m Band filter system 900l: 2.22 x 1.40 x 2.20 m

Year of construction: 2006, operating hours: 44,825 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1167000036, TECHNICAL DETAILS X-axis travel: 700 mm Y-axis travel: 800 mm Z-axis travel: 800 mm B-axis: 360º B-axis step size: 0.001º spindle speed: max. 10.000 rpm spindle drive power: 30/20 kW (40%/100% ED) CNC control: SIEMENS 840D Powerline ShopMill Classic number of pallets: 2 pallet dimension: 500 x 500 mm workpiece diameter: 800 mm workpiece height: max. 1.350 mm tool holder: SK-40 number of tools in magazine: 45 MACHINE DETAILS Iijdpslu Ex Refx Abvsc hours under power: 64.431 h Spindle working time: 44.825 h Total power consumption: 60 kVA Supply voltage: 400 V / 50 Hz Connected current: 100 A Coolant supply: 40 bar Tank capacity: 980 l EQUIPMENT - chip conveyor - rotating sight glasses - operating mode 4 - high pressure pump - Laser tool measurement for measuring tool length and diameter - Prepared for HEIDENHAIN probe

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, 5-axis machining center with rotary table (C) and tilting head (B) The machine comes from a large operation and was maintained preventively. Isdpfewvitxjx Abvjic TECHNICAL DETAILS Travel X: 760 mm Travel Y: 560 mm Travel Z: 560 mm Control: 840 D Powerline Siemens Tool holder: SK 40 Number of tool magazine positions: 60 Spindle speed: 0–12,000 rpm Pallet size: 630 x 500 mm Feed rate: 20–15,000 mm/min Rapid traverse: 50 m/min MACHINE DETAILS Total connected load: 64.2 kVA Total power requirement: 26 kW Machine weight: 12 t Space requirements: 5.2 x 4.5 x 2.45 m Spindle hours: 20,844 h Operating hours: 58,437 h Dimensions and Weight Machine body length: 3,450 x 2,400 x 2,650 mm Machine body weight: approx. 6.50 t Tool magazine length: 2,600 x 1,000 x 2,000 mm Tool magazine weight: approx. 0.50 t Cooling unit length: 1,850 x 1,750 x 1,500 mm Cooling unit weight: approx. 0.50 t Chip conveyor length: 3,200 x 1,000 x 1,700 mm Chip conveyor weight: approx. 0.50 t EQUIPMENT - Pallet changer with 2 pallets - Tool changer with 60 positions

Year of construction: 1996, operating hours: 91,897 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 288, TECHNICAL DETAILS x-way: 600 mm y-way: 560 mm z-way: 560 mm Control: Siemens MACHINE DETAILS supply voltage: 400 V / 3 phases / 50 Hz Connected load: 60 kVA total power requirement: 12 kW Machine weight: approx. 10 t EQUIPMENT Iijdpfslruxfjx Abvec - 2 machine pallets - 1 probe

Year of construction: 2000, operating hours: 47,085 h, condition: good (used), functionality: fully functional, machine/vehicle number: 42272, Machining center with 5 pallets TECHNICAL DETAILS x-way: 600 mm Iisdjlrupaopfx Abvec y-way: 560 mm z-way: 560 mm B-axis (table): 360° tool holder: SK 40 pallet size: 5 x 500x400 mm Control: Siemens 840D MACHINE DETAILS supply voltage: 300 V / 3 phases / 50 Hz Power: 60 kVA

Year of construction: 2003, operating hours: 33,792 h, condition: good (used), functionality: fully functional, machine/vehicle number: 28840003282, TECHNICAL DETAILS x-way: 800 mm y-way: 710 mm z-way: 710 mm B-axis: 360 Control: Siemens Sinumerik 840D number of pallets: 2 pallet size: 500 x 630 mm tool diameter: max. 120 mm tool holder: SK 50 Magazine: chain magazine with 62/90 places MACHINE DETAILS Machine weight: approx. 12.5 t (transport weight) height: 3,2 m space requirement: 6,0 x 6,5 m Rated power: 80 kVA Rated current: 120 A Operating voltage: 400 V / 50 Hz Compressed air: 6 bar Iisdpfxolruquo Abvec

Condition: used, Year of construction: 2005, x-travel 750 mm y-travel 560 mm z-travel 600 mm Control HEIDENHAIN iTNC 530 total power requirement 70 kW weight of the machine ca. 11.000 kg dimensions of the machine ca. m D E C K E L M A H O (Germany) Vertical CNC Machining Centre with high speed linear drives in 3 Axis and in double column design for high precision work Model DMC 75 V LINEAR Year 2005 _____ Working range: Longitudinal stroke X Axis 750 mm Vertical stroke Z Axis 600 mm Cross stroke Y Axis 560 mm Table clamping size 950 x 650 mm Max. Table load 1.000 kg Max. height of workpiece 600 mm Tool holder Cone HSK 63 Spindle (KESSLER) speeds 18,000 rpm Torque, max. 86/130 Nm Spindle run-up time / stop time 3.2 sec Feeds / Quickfeeds, X, Y and Z Axes max. 90,000 mm/min Feed force 11.000/9.500 N Axis acceleration, X / Y / Z Axes 15 / 12 / 18 m/s Spindle drive 25/35 kW Total electrical load, approx. 75 kW - 400 V - 50 Hz Weight, approx. 11.000 kg Accessories / Special Features: This machine is very interesting because of the very stable double Column Portal Design and with the modern linear technology for fast and powerful high precision work. * HEIDENHAIN modern CNC Control System Model iTNC 530 in 3 axes, with all the usual options, cycles and sub programmes. * Table moves only in x axis and allows a comfortable loading of heavy workpieces * 30-position disktype tool magazine for max. tool Ø 100, 140 and 200 mm x max. length 300 mm. Max. weight 10 kg. Cut-to-cut time 6 sec. Pick-Up by main spindle. * BLUM tool-breakage control, Blum Receiver for RENISHAW –Head, no head available. * Double linear motors ensure very fast feed motions and strong feed power, equipped with own cooling system. * KESSLER Milling Spindle, Liquid-cooled, steplessly programmable up to 18.000 rpm * Completely covered working area with 2 sliding doors, one with spin-type bull-eye. * KNOLL Coolant device with scraper-type chip conveyor and pressure pomp. * Spindle working hours approx. 23.000 h Condition : Very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Iisdpjt Hw Trsfx Abvsc Payment : Net, after conclusion of contract.

Condition: good (used), Year of construction: 2005, operating hours: 40,403 h, functionality: fully functional, Deckel Maho DMC 80H duo Block About the Machine: Extremely robust machine. Technical Specifications: - Control: Siemens 840D - Travel paths X, Y, Z axes: 800/800/800 mm - Travel path C axis: 360° - Clamping surface rotary table: 800 x 630 mm - Rapid traverse: 60 m/min - Spindle speed: 20 - 12000 rpm - Tool holder: SK50 - Tool magazine with 60 positions - Network connectivity - Automation interface available Equipment: - Internal coolant supply 50 bar with belt filter system - Work area rinsing system - Rinsing gun - Chip conveyor Inspection/Test under power at our facility is of course possible. We are pleased to offer transport, installation and commissioning at your location. Everything from a single source: We, Baumgärtner CNC GmbH & Co. KG, are a company specializing in: - Service - Maintenance - Overhaul Isdpfxsyhwrcj Abveic - Automation of DMG machines and other renowned manufacturers. We support you! From machine purchase, transport and installation, to commissioning and subsequent maintenance or repair work, you can rely on us.