Used Doosan Puma 240 for sale (273)

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 30,280 h, The Doosan DL550 machine shown in the picture is for sale in good condition. Bucket size: 5.8 m3. Regularly maintained, ready for immediate operation. It can be viewed while in operation. Technical specifications: Dsdpfx Aaszd Sk Hsrjwd Category: Wheeled loader Operating hours: 30,280 hours Emissions sticker: 4 (Green) Year of manufacture: 2014 Equipment: Central lubrication system; Four-wheel drive; Particulate filter Tire condition: 75%. Delivery: EXW Székesfehérvár, Hungary. An optional 16 m3 bucket is available at an additional cost.

Condition: used, functionality: fully functional, machine/vehicle number: 0148, Year of construction: 2021, operating hours: 500 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,500 mm, fuel type: gas, mast type: triplex, construction height: 2,195 mm, fork length: 1,200 mm, drive type: Treibgas, LPG forklift Chassis number: 0148 Dwodpsy Up Awofx Aarod Load centre of gravity: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tyres type: Superelastic Front tyres condition: 60 - 80% Rear tyres type: Superelastic Rear tyres condition: 60 - 80% Side shift, 3rd valve, 4th valve, rear work light, front work light, roof cover, windscreen, half cabin, windscreen wiper,

Condition: used, functionality: fully functional, machine/vehicle number: 0195, Year of construction: 2023, operating hours: 255 h, load capacity: 5,000 kg, lifting height: 4,700 mm, free lift: 1,800 mm, fuel type: electric, mast type: triplex, construction height: 2,300 mm, total length: 2,400 mm, drive type: Elektro, Electric 4-wheel forklift truck Chassis number: 0195 Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Reconditioned without warranty Technical condition: Very good Front tires Type: Superelastic Dwedpfx Aajy Up N Dorod Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Condition: 80 - 100% Battery Volt: 80V Battery type: PzS Battery year of construction: 2023 Sideshift, fork positioner, 3rd valve, 4th valve,

Condition: like new (used), Year of construction: 2019, operating hours: 2,352 h, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: FANUC, controller model: 31i-B, workpiece weight (max.): 700 kg, table width: 500 mm, table length: 1,000 mm, table load: 700 kg, rotational speed (max.): 20,000 rpm, spindle speed (max.): 20,000 rpm, operating hours of spindle: 2,352 h, coolant supply: 30 bar, spindle motor power: 22,000 W, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, DOOSAN NX 5500 II VERTICAL MACHINING CENTER YEAR OF MANUFACTURE: 2019 Dwjdpfx Aey Tvbkjarjd CNC FANUC 31i-B SPINDLE: 20,000 RPM, 22KW, HSK-A63 TRAVEL: X 900, Y 550, Z 500 MM RANDOM TOOL CHANGER: 30 TOOLS, TOOL-TO-TOOL CHANGE TIME: 1.6 S DUAL CHIP CONVEYOR ELECTRONIC HANDWHEEL INTERNAL COOLANT SYSTEM: 30 BARS LASER PROBE FOR TOOL MEASUREMENT: RENISHAW NC4 PROBE FOR WORKPIECE MEASUREMENT: RENISHAW OMP60 WEIGHT: 9000 KG

Condition: used, functionality: fully functional, Year of construction: 2012, weight max. in kg 1500 kg serial number FGA04-1290-00480 drive Treibgas weight 2800 kg length in width 940 mm ca. 2.060 mm (je nach Mas engine output ca. 34 kW kW Dodpfx Asztfyyoarowd cubic capacity 1.975 cm³ ccm

Condition: used, Year of construction: 2018, travel -x axis 1.300 mm travel -y axis 670 mm travel -z axis 625 mm control HEIDENHAIN - TNC 620 number of spindle speeds 12.000 U/min tool taper SK 40 table dimension (L x W) 1.500 x 670 mm numbers of positions in the tool changer 30 Milling machining centers - vertical | DOOSAN - DNM 6700 equipped with 30-way tool changer, ITC cooling system and chip conveyor. Dwsdj Adfluspfx Aared The machine only has 13.600 spindle hours. The machine is in well-maintained condition, has been used exclusively for machining aluminium and plastics, and is available for inspection under power at any time. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM5700 | DNM-5700

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: MVH1009, travel distance X-axis: 610 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 510 mm, overall weight: 5,000 kg, spindle speed (max.): 8,000 rpm, Doosna VM50 Machining Center, fully functional, Siemens control. Spindle taper: BT40 Spindle speed: 0 – 8000 rpm Work table: 700 × 520 mm Axis travel: X=610 mm / Y=760 mm / Z=510 mm Tool magazine: ATC 12 (with arm) Equipment: Automatic tool changer ATC 12 Chip conveyor Spindle coolant system Dwsdpoz S Awlsfx Aared

Condition: used, Year of construction: 2007, 12-POSITION TURRET - TAILSTOCK - C-AXIS - TOOL MONITOR - IEMCA BOSS 432/32 BAR FEEDER - WELL-EQUIPPED - Djdpfx Aae Ahyrgorswd DOOSAN/FANUC 0i-TC CONTROL - MACHINE ARRIVING; MORE PHOTOS TO FOLLOW SOON.

Condition: like new (used), Year of construction: 2024, operating hours: 260 h, functionality: fully functional, overall weight: 73 kg, load capacity: 20 kg, arm reach: 1,700 mm, pivoting range: 360 °, controller manufacturer: Doosan Robotics, controller model: DSC, teach pendant manufacturer: Doosan Robotics, teach pendant model: TP, input voltage: 220 V, input current: 6 A, type of input current: AC, repeat accuracy: 0.05 mm, Doosan Robotics H2017 Collaborative Robot (Cobot) – 20 kg payload, 1700 mm reach. The robot has been used for laser welding and is in as-new condition with only 260 operating hours. It is fully functional and ready for immediate deployment. Dedezia Evopfx Aarswd The robot is delivered complete with a stand, which is included in the price. The stand is designed to be easily moved with a pallet jack, allowing flexible positioning in the production environment. The laser welder (Gweike 1500W) is available as an add-on for 15,000 EUR – contact us for more information. Please note: The robot is not CE certified in its current configuration. Technical specifications: - Payload: 20 kg - Reach: 1700 mm - Degrees of freedom: 6 - Repeat accuracy: ±0.05 mm - Robot weight: 73 kg - Input voltage: 220V AC - Protection rating: IP54 (robot body) - Controller: Doosan Smart Controller (DSC) The robot is equipped with built-in force/torque sensing on all 6 joints, enabling safe human-robot collaboration without safety fencing in many applications. It supports Doosan's intuitive programming environment and is compatible with a wide range of end-of-arm tooling and accessories. Suitable for: laser welding, laser cutting, machine tending, palletizing, assembly, material handling, and other industrial applications.

Condition: used, Year of construction: 2006, MAKE DAEWOO DOOSAN, MADE IN KOREA MODEL MYNX SERIES NM 410 YEAR 2006 CONTROL FANUC 0iMC TABLE SIZE 920.0 x 430.0mm TRAVERSES (X, Y, Z axes) 762.0 x 410.0 x 510.0mm SPINDLE SPEED Upto 8,000rpm SPINDLE SIZE BT 40 ATC 20 stations SPINDLE POWER 11.0Kw/15.0HP MAX. TABLE LOAD 600.0kgs MACHINE DIMENSIONS 2200.0 x 2600.0 x 2600.0 mm MACHINE WEIGHT 5000kgs Dwodpfxs Ah Td Sj Aared PLUS SIDE ARM TOOL CHANGER COOLANT SYSTEM SET OF MANUALS

Condition: used, color: orange, Equipment: air conditioning, Year of construction: 2020 Operating hours: 6.605 Empty weight: 30.500 kg Selling price: € 85.000, US$ 94.630 Dsdpfx Ae Agu T Hjarswd = Additional options and accessories = - Autoradio - Bucket = Remarks = Used Doosan DX300LC-7 for sale at CHESS This Doosan DX300LC-7 is equipped with a 6 cilinder Doosan DL08V (202kW) diesel engine with just 6.605 working hours on the service meter. Hydraulics for hammer and rotation function additional work lights hydraulic quick hitch teeth bucket additional books 360 degrees camera system boxing ring electric diesel pump Doosan DX300LC-7!! For more information please contact us

Condition: good (used), functionality: fully functional, Year of construction: 2012, operating hours: 8,235 h, Internal combustion forklift Machine brand: DOOSAN Model: D90S-5 Year of manufacture: 2012 Hour meter reading: 8235 Own weight (kg): 12197 Load capacity (kg): 9000 Lifting height (mm): 3100 Side shift forks Mast type: STD Fuel type: diesel Dwedpfxjz E S Eqs Aarod Recently underwent a major technical inspection at 8060 operating hours. - new tires - new forks - cylinder regeneration - transmission: discs + seals - brakes: discs and bearings - all oils, fluids, and filters Technical condition: used, good

Condition: good (used), Year of construction: 2014, functionality: fully functional, DOOSAN Horizontal Machining Center Model: NHP 5500 Year: 2014 Control Unit: FANUC 31I-MODEL B X-axis travel: 800 Y-axis travel: 750 Z-axis travel: 850 Dsdpfx Asz Apb Tearowd Table length: 500 Table width: 500 Max. workpiece size (length x width x height): D.850x1100 Table surface: Tapped holes Max. workpiece weight: 800 kg Spindle: 10000 rpm with oil-cooled, double-contact flange Spindle connection: ISO 50 Torque (cont. / 10 min): 600 NM Rapid traverse rate (xyz axes): 60,000 Number of tools: 60 Coolant pressure: 70 Bar Coolant tank capacity: 500L Height: 3495 Width: 3930 Depth: 6520 Weight: 18000 Pallet size: 500x500 Chip conveyor: Scraper type -EXTERNAL 4-WAY HYDRAULIC LOCKING SYSTEM, 70 BAR, WITH LOCK/UNLOCK SWITCH -INTERNAL/EXTERNAL AIR BLOW FUNCTION, ADJUSTABLE "M" FUNCTION -AUXILIARY PUMP FOR SHOWER WASHING, CALPEDA 15 BAR -PREPARATION FOR ROBOT ELECTRICAL CONNECTION (FANUC) -INTERNAL TOOL LENGTH AND RADIUS OFFSETTING SYSTEM, RENISHAW TS27R. A NEW, IDENTICAL UNIT IS AVAILABLE IN STOCK IN CASE OF FAILURE. -PREPARATION FOR WORKPIECE MEASUREMENT AND OFFSETTING PROBE WITH RENISHAW RMP60 CYCLES (RADIO TRANSMISSION)

Condition: good (used), Year of construction: 2012, functionality: fully functional, Machine parameters: Travel in X, Y, and Z axes: 1270 x 670 x 625 mm Table clamping area: 1300 x 670 mm Description: Djdpfx Asz Iw Ddsarewd The machine is in good technical condition, and testing is possible by prior arrangement. It features a FANUC control system. The machine has a cast iron construction, linear guides, travel in the X/Y/Z axes of 1270/670/625 mm, table dimensions with clamping "T" slots of 1300 x 670 mm, table load capacity of 1000 kg, and a tool changer with 30 positions. Extensive accessories include: a 4th axis (rotary table), a hydraulic vice, a RENISHAW tool and workpiece probe, an oil skimmer, a three-color light signaling system, a chip conveyor, a Filtermist 6002 emulsion mist extractor, tool holders, etc.

Condition: excellent (used), Year of construction: 2008, DOOSAN MX2000ST 9 AXIS MILL TURN CENTER Sub spindle and bottom Turret Both spindles have 200mm power chucks on at the moment but we also have a Heinbuck collet chuck available good package of tooling Dodpfx Aoydigmjarowd Shown working on our motorsport jobs all done in one! Can be demonstrated if required.

Condition: excellent (used), Year of construction: 2016, Swing over bed 600mm, swing over carriage 400mm, 65mm bar capacity, machining diameter 350mm, machining length 330mm, 12 position turret, Dwodpfxjz Rz Aqo Aarjd Fanuc series I control, Spindle 4500 rpm, swarf conveyor, tool setter, tailstock

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 3,000 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 18,000 rpm, spindle motor power: 30,000 W, number of slots in tool magazine: 60, tool weight: 8,000 g, number of axes: 5, This 5-axis DOOSAN VCF850LSR-II was manufactured in 2021. It features an impressive X-axis travel of 3,000 mm, Y-axis travel of 850 mm, and Z-axis travel of 800 mm. The machine includes a robust tool magazine capacity of 60 tools and a maximum load on the fixed table of 3,500 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN VCF850LSR-II vertical machining centre we have for sale. Contact us for further details. • Operating hours: approx. 2,500 effective hours • Travels: • B-axis: ±110° • C-axis: ±360° • Rapid traverse (X/Y/Z): 40 / 40 / 40 m/min • Max working feed (X/Y/Z): 20,000 mm/min • Spindle: • Power: 24 / 30 kW • Max torque: 121 / 155 Nm • Taper: ISO 40 • Tool magazine: • Capacity: 60 tools • Max tool dia.: 76 mm (130 mm with adjacent positions free) • Max tool length: 300 mm • Tool-to-tool: 5.5 s • Chip-to-chip: 13 s Djdoz S Hz Uepfx Aarswd • Workholding/table: • Fixed table: 3,500 × 870 mm, max load 3,500 kg • Rotary table: Ø 800 mm, max load 1,200 kg • Max workpiece Ø: 1,050 mm • Max workpiece height: 680 mm (vertical) / 1,095 mm (horizontal) • Measurement: Absolute linear scales on X/Y/Z • Features: Removable central door; Pendulum machining capability • Utilities: • Electrical: 400 V / 3 phases + ground • Required power: 63 kVA • Compressed air: 6 bar • Coolant tank capacity: 560 l • Condition: Very well maintained • Operational status: In production / under power • Extras: Videos with timestamp available on request • Transport: Reportedly can be transported in one piece Additional equipment • High-pressure through-spindle coolant, 70 bar • Cyclone coolant filtration • Chip conveyor • Renishaw RMP-60 workpiece probe • Renishaw RTS tool setting system • Original kinematic calibration ball • Heidenhain Advanced Function Set 1 • Heidenhain Advanced Function Set 2 • Dynamic Collision Monitoring (DCM) • Lift-Off function • DXF converter • 3D toolpath visualization • 3D machining simulation • CAD Viewer • Automatic lubrication system • Hydraulic unit • LED work area lighting • 3-color alarm lamp • CE documentation • Machine manuals Technical Specification Taper Size ISO 40

Condition: used, Year of construction: 2012, travel -x axis 1.630 mm travel -y axis 762 mm travel -z axis 650 mm control FANUC - 0I-MD Spindle speed 12.000 min -1 weight of the machine ca. 13 t Milling machining centers - vertical | DOOSAN - DNM 750 equipped with 30-way tool changer, ITC (20 bar) and chip conveyor. Dwodpfx Aaezw N E Iorjd The machine only has 13.686 spindle hours. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM750 | DNM-750

Condition: ready for operation (used), Year of construction: 2010, operating hours: 6,078 h, travel distance X-axis: 1,270 mm, controller manufacturer: FANUC, overall weight: 8,500 kg, spindle speed (max.): 12,000 rpm, number of axes: 4, This 4-axis DOOSAN DNM650 was manufactured in 2010. It features a robust weight of 8500 kg and is equipped with a Fanuc Series control system. The machine includes a 4th axis rotary table unit mounted on the main table, enhancing its versatility. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM650 vertical machining centre we have for sale. Contact us for further details. - Mains Connection: AC 220 V, 3-Phase, PE, 50/60 Hz- Rated Power: 42.55 kVA- Interrupting Capacity: 5 kA- Full Load Current: 124.30 A- Short Circuit Capacity: 35 kA- Circuit Diagram Version: DM50H00ZA03- Weight: 8500 kg- Control System: Fanuc Series- Additional Equipment: signal stack light, mist extraction ducting system Dodpfx Ae Aa Ax Rjarswd

Condition: like new (used), Year of construction: 2015, operating hours: 2,500 h, functionality: fully functional, AVAILABLE FOR INSPECTION DURING PRODUCTION DOOSAN HORIZONTAL MACHINING CENTER Model: HM1250 Year: 2015 Control Unit: FANUC 31I-B X-axis travel: 2100 mm Y-axis travel: 1500 mm Z-axis travel: 1500 mm Djdpfxoz Ihnaj Aarswd Table length: 1250 mm Table width: 1250 mm Max. workpiece dimensions: DIAMETER 2300, HEIGHT 1725 Max. workpiece weight on table: 40000 kg Spindle speed: 6000 rpm Spindle connection: ISO 50 Torque (continuous / 10 min): 1989 Nm Number of tools: 90 positions High pressure: 70 bar

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 800 kg, number of slots in tool magazine: 30, controller manufacturer: Fanuc, total height: 2,700 mm, total length: 4,080 mm, total width: 2,400 mm, overall weight: 7,000 kg, table length: 1,200 mm, table width: 510 mm, controller model: Oi-MC, coolant supply: 15 bar, spindle motor power: 15,000 W, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, spindle nose: BT40, spindle speed (max.): 12,000 rpm, table load: 800 kg, Equipment: chip conveyor, rotational speed infinitely variable, Doosan NM510 Vertical Machining Centre Machine Type: 3 Axis Vertical Machining Centre Year: 2008 Control: Fanuc Series Oi-MC Condition: Very Good Includes Swarf Conveyor Chiller MCF20 Coolant Filter Autolube 6 x Tool Holders Notes Vice and clamping block in photos not included Technical Specifications Table Size: 1200 x 510mm Table Load: 800kg Travel (X-Axis): 1020mm Travel (Y-Axis): 510mm Travel (Z-Axis): 510mm Max Spindle Speed: 12,000rpm Spindle Power: 18.5/15/11kW Spindle Taper: BT 40 Rapid Traverse (X/Y/Z): 36/36/30m/min Tool Storage Capacity: 30 tools Tool Change Time (T-T/C-C): 1.7/3.5sec Machine Dimensions: 4080 x 2400 x 2700mm Machine Weight: 7,000kg Dwsdpfx Aaev Iq Ezerod Notes: *Specifications are given in good faith but not guaranteed*

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 11906001, load capacity: 10 kg, arm reach: 1,300 mm, teach pendant manufacturer: Teach Pendant, Equipment: documentation/manual, Doosan M1013 Cobot NEW, 0 operating hours + Teach Pendant + 2x OnRobot 3FG15 + Dual Quick Changer Description Doosan Robotics M1013 Cobot – NEW – 0 operating hours – including Teach Pendant & 2x OnRobot 3FG15 and Dual Quick Changer. Doosan M1013 complete package – manufactured in 2023 – unused. For sale is a Doosan Robotics M1013, manufactured in 2023, in new and unused condition. Djdpezx T Atsfx Aarewd The robot has not been put into operation and has 0 operating hours. The components are in their original packaging or in very good condition. Included in the scope of delivery: Doosan Robotics M1013 Cobot Doosan Teach Pendant Doosan Control Box all necessary connection cables original packaging programming/operating manuals 2 x OnRobot 3FG15 grippers OnRobot Dual Quick Changer suitable accessories and mounting material Thus, a complete package for professional automation applications is offered. The M1013 is suitable, for example, for: Machine loading Pick & Place Assembly operations Handling Parts feeding Quality control flexible automation of production processes Technical data Manufacturer: Doosan Robotics Model: M1013 Year of manufacture: 2023 Condition: New / unused Operating hours: 0 Payload: 10 kg Reach: 1,300 mm Axes: 6

Condition: used, power: 141 kW (191.71 HP), Equipment: air conditioning, Year of construction: 2022 Operating hours: 3.284 Empty weight: 15.500 kg Selling price: € 59.500, US$ 66.240 Availability: in stock = Additional options and accessories = - Autoradio Dsdpfx Aot E Rvqearswd - Reverse camera = Remarks = Used Doosan DL280-7 wheel loader for sale at CHESS This Doosan DL280-7 equipped with a 6 cilinder water cooled turbo charged Doosan DL06V diesel engine (141kW) with just 3284 working hours on the service meter! Moreover this machine is equipped with a high-tip bucket 4x full rubber tires loadmaster weight limiter Nice Doosan DL280-7 with genuine hours! For more information please contact us

Condition: excellent (used), Year of construction: 2022, operating hours: 4,605 h, functionality: fully functional, Controller: FANUC 31i-B5 Max. turning diameter: ø540 mm Max. turning length: 1.020 mm Dwsdszilupspfx Aared Spindle bore / bar capacity: ø76 / 65 mm Y-axis travel: 170 mm (±85) Milling spindle: 12.000 rpm, 18.5 kW Tool magazine (ATC): 80 stations, Capto C6 Tool change time: 2.0 s Counter spindle: 5.000 rpm, 22 kW Spindle power: 22 / 18.5 kW (S1/S6)

Condition: used, Equipment: air conditioning, Year of construction: 2022 Operating hours: 2.990 Empty weight: 24.000 kg Selling price: € 69.500, US$ 77.370 = Additional options and accessories = - Autoradio = Remarks = Used Doosan DX210LC-7 for sale at CHESS This Doosan DX210LC-7 is equipped with a 6 cilinder Doosan DL06V (127kW) diesel engine with just 2.990 working hours on the service meter. Hydraulics for hammer and rotation function additional work lights hydraulic quick hitch rear and side view camera system electric diesel pump Dwjdpfx Aot E Ruyjarod Doosan DX210LC-7 ready or inspection at our yard! For more information please contact us