Used Dosing Pump for sale (9,361)

Condition: used, This listing is for the Autoclude Model V Peristaltic Pump Dcodpfx Adjxhduxo Nok The unit is in full working condition and is ready for immediate use The Autoclude peristaltic pump is a type of tube (hose) pump made by Verderflex / Autoclude. Its defining feature is that only the flexible tube (or hose) inside the pump is in contact with the fluid being pumped. The rest of the pump (rollers, casing etc.) stay clean / isolated. This makes them good for contamination-critical, corrosive, slurry, or shear-sensitive fluids Design / Key Features Some of the design / functional features: Seal-less and valveless: Since fluid is contained within tube, no seals exposed to fluid or valves that could leak. Self-priming: Can start pumping without needing fluid completely filling the inlet, and often able to handle gas or ‘air’ in the line. Capable of running dry without damage (when tube material allows) for short durations. Electrolab Group Reversible flow: The rotor or drive can reverse, so flow can be reversed to purge lines, etc. Gentle pumping: Because fluid only contacts tube, and the shearing is limited, better for shear-sensitive liquids / slurries. Rapid tube replacement Stackable / multi‑head options: Some “easy tube loading” models allow several pump heads to be driven by a single drive unit, for multi‑channel or sampling/analysis setups

Condition: used, Year of construction: 2014, Speed: 1450 rpm Motor: 2.4 kW Suction capacity / Flow rate: 70 m³/h Suction pressure: 3 mbar Tank: Operating pressure: 0.99 bar Capacity / Liters: 90 Operating temperature: 50°C Year of manufacture: 1989 No. 400 100 Dcodpfsvvi Nnjx Ad Nsk Storage location: Supplier

Condition: used, Year of construction: 1995, Storage location: Supplier Dsdpfx Asvvi Sijd Njck

Condition: used, This listing is for a QuattroFlow QF150 Diaphragm Pump. The unit is in full working condition and is ready for immediate release. The Quattroflow 150S is a 4-piston Diaphragm pump, which is mainly used to pump water-like fluids that are typically handled in research-, pilot plant- or production facilities of the pharmaceutical, biotech,food or cosmetic research centres or plants Examples: • Solutions containing proteins (albumin, IgG, Clotting factors, monoclonal antibodies, enzymes, vaccines.) • Solutions of polymers or suspensions (silicon, latex, chromatography media) • Cell suspensions (bacteria, yeast, algae, fungi, mammalian cells) • colloidal solutions • Suspensions of viruses or phage • Dairy products Dodpfexx Avpsx Ad Nsck • Gelatine • Supplements and ingredients for cosmetic and food Flow rate max.: Eccentric shaft 3° l/h (lpm) 100 (1.67) 100 (1.67) Eccentric shaft 5° l/h (lpm) 180 (3) 180 (3) Flow rate min.: Eccentric shaft 3° l/h (lpm) 1 (0.017) 1 (0.017) Eccentric shaft 5° l/h (lpm) 1 (0.017) 1 (0.017) Pressure: Temperature of fluid < 40°C bar (psi) 6 (87) 6 (87) Temperature of fluid > 40°C bar (psi) 4 (58) 4 (58) Temperature max.: Fluid °C (°F) 80 (176) 80 (176) CIP °C (°F) 90 (194) 90 (194) SIP °C (°F) 130 (260) 130 (260) Autoclave °C (°F) 130 (260) 130 (260) Suction lift dry at: 3000 rpm 3000 rpm Eccentric shaft 3° m (ft) 1-1,5 (3.2-4.9) 1-1,5 (3.2-4.9) Eccentric shaft 5° m (ft) 2-3 (6.6-9.8) 2-3 (6.6-9.8) Volume specifications: Approximated volume per revolution at free output ml 0,72 (3°) 1,2 (5°) 0,72 (3°) 1,2 (5°) Filling volume without connectors ml 15 15 Residual volume (after idle with highspeed motor) ml 1-3 1-3 Product wetted surface (approx.) cm² (inch²) 112 (17) 112 (17) Speed range pump rpm 10-3000 10-3000 Connection specification inlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm (inch) 25 25 Internal diameter mm (inch) 4,7 4,7 Connection specification outlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm 25 25 Internal diameter mm (inch) 4,7 (0.19) 4,7 (0.19) Position of connectors Inline Inline Number of flow directions 4 4 Diameter drive shaft mm 7 7 Product wetted materials (standard): Pump housing SS316L SS316L Valve plate SS316L SS316L Diaphragms Santoprene Santoprene Valves EPDM EPDM O-rings EPDM EPDM Non-product wetted materials (standard): Pump housing SS316L SS316L Bearing housing SS316L SS316L Base plate SS316 SS316 Hood SS316 SS316 Dimensions pump with motor and housing: Length mm (inch) 257 (10,2) 277 (10-91) Width mm (inch) 164 (6,5) 200 (7,87) Height mm (inch) 185 (7,2) 195 (7,67) Weight pump with motor and housing kg (lb) 9,8 (22) 11,2 (25) IP protection class pump IP 54 54 Operating temperature range °C (°F) 0…40 (32…104) 10…30 (50…86)

Condition: used, EOS Transitube DCL 800/30 PM Powder Conveying System / Dosing System for 2 Components Description For sale is a used EOS Transitube DCL 800/30 PM powder conveying system from tim plast Anlagenbau GmbH. The system was developed for the continuous dosing, conveying, and homogenization of two material components. It is suitable for processing powders, granules, and ground materials in the plastics industry. The materials are dosed precisely, mixed via the Transitube conveying system, and continuously fed to the production machine. According to the manufacturer, the DCL series is designed for the continuous dosing and mixing of two components. Due to its robust industrial design and extensive scope of supply, the system is ideally suited for use with extrusion and injection molding machines. Technical Data Manufacturer: transitube / tim plast Anlagenbau GmbH Model: DCL 800/30 PM Djdpfjzn H D Nex Ad Njck Designation: EOS Powder Conveying System Material hoppers: 2 × approx. 400 liters Conveying capacity: approx. 50–2,000 kg/h (material dependent) Dosing accuracy: ±0.5 to ±2 % Dosing range: 5–50 % Additive dosing: 0.2–10 % Mains connection: 3/N/PE 400 V AC Frequency: 50/60 Hz Connected power: 2.0 kW Dimensions (approx.): Width: 1,850 mm Depth: 900 mm Height: 1,320 mm Weight: approx. 180 kg Equipment 2 dosing hoppers with hinged lids Transitube screw dosing system Automatic control cabinet with touch panel Electrical control Conveying and mixing system Pneumatic components Flowserve Automax actuators Conveying motor with gearbox Extensive hose and pipe package Accessories as shown in the pictures Application areas Plastics processing Extrusion Injection molding technology Powder conveying Granule conveying Ground material dosing Material mixing Production automation Condition Used. The system is in good condition with normal signs of wear and tear consistent with its age. The scope of supply corresponds to the photos shown. Scope of supply EOS Transitube DCL 800/30 PM powder conveying system Control cabinet Conveying units Motors Pneumatic components Piping Conveying hoses Extensive accessories as shown in the pictures Shipping Inspection possible by appointment at any time. Loading onto a truck can be arranged. Europe-wide shipping by freight forwarder possible for an extra charge. Subject to prior sale and errors.

Condition: used, Year of construction: 2016, total length: 1,200 mm, total width: 800 mm, total height: 1,400 mm, Empty weight: 150 kg - Year: 2016 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: C34567 - Transport dimensions: 1200mm x 800mm x 1400mm (l x w x h) - Transport weight [kg]: 150kg Dedpowgxh Hofx Ad Neck - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: used, total length: 1,040 mm, total width: 550 mm, total height: 450 mm, - Documentation available: No - CE certificate present: No - Transport dimensions: 1040mm x 550mm x 450mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Dsdpfxsxm Rgxe Ad Nsck

Condition: as good as new (ex-display), Diaphragm pump, FLUX air-operated diaphragm pump – 8 bar,Membrane pump, New condition (without warranty) Dodpszrm Aaefx Ad Neck Manufacturer: FLUX - GERÄTE GMBH (Made in Germany) Type: FDM 25 S/TT Serial number / Part number: 15663 Max. flow rate: 150 – 175 l/min Max. operating pressure (PN max): 8 bar Housing material: Stainless steel (S) Diaphragm / Seal material: PTFE / Teflon (TT) Connection size: 1" (DN 25)

Condition: good (used), Year of construction: 2010, For Sale: Raw Material Dosing System Dsdpsy Spg Rsfx Ad Njck Brand: AZO Year of manufacture: 2010 Included: - 8x dosing tank 500 liters - complete documentation - frames - load cells - dosing screws If you have any questions or comments, please feel free to contact us. Inspection is possible on site. Best regards, Leo Holland

Condition: used, Edwards Maglev turbomolecular pump, model STP XA4503C (serial number moz9430) + SCU1500 Controller. Fully tested. Dcedpfx Asztblxsd Nek

Condition: used, Edwards Maglev turbomolecular pump STP XA4503C (moz8950) + SCU1500 Controller. Fully tested. Dsdpfeztbhtsx Ad Nsck

Condition: used, Edwards Maglev turbomolecular pump STP XA3203C + SCU1600 Controller. Fully tested. Dcodpfsztbgvsx Ad Nok 4 sets available. (EUR 10,500/set)

Condition: used, mileage: 230,000 km, power: 272 kW (369.82 HP), first registration: 03/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 05/2026, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, electronic stability program (ESP), parking heater, Manufacturer Scania Model P370 6x4 Liebherr THP140H 24 M4 XH Year 2016 Condition Good Serial Number YS2P6X40005406746 Ref. nr. 1418019 Reg. date: 23-03-2016 Engine: DC13 Hk: 370 Km: 230000 Gearbox: Opticruise (GRS905) Eurotype: 6 Diesel tank: 1 Tank liter: 350 L Rear view camera: ? Cabin heater: ? Air conditioning: ? Number of beds: 1 Cabin type: CP19L Navigation: ? Radio: 1 Dcodpfxsxwg Rzo Ad Nsk Refrigerator: ? Walkie: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 315/80R22,5 Cover% left 60% Front suspension: Springs Suspension rear: Air Wheelbase: 4300 mm Toolbox: ? Hydraulic system: ? Total weight: 26000 Kg Net weight: 22100 Kg Load capacity 3900 Kg Manufacturer: Liebherr THP140H 24 M4 XH Capacity: 140 m3

Condition: used, Lubrication pump, oil pump for central lubrication, lubrication unit Central lubrication pump, oil pump for central lubrication, hydraulic pump, oil central lubrication pump Manufacturer: BEKA Schmiertechnik / Baier & Köppel, Pegnitz Type E-812 / ES0.5 Year of manufacture: approx. 1990 Flow rate: 0.4 l/min Operating pressure: 15 bar Dcedpfx Adezpbq Hs Nsk Tank capacity: approx. 3 liters Motor power: 0.09 kW Motor speed: 2730 rpm Current consumption: 0.4 A Power supply: 400 Volt, 50 Hz Dimensions L x W x H: 280 x 150 x 380 mm Weight: 8.5 kg Good condition 2 units available Price stated per unit

Condition: refurbished (used), Various Almatec pumps, plastic and stainless steel versions, all sizes of the AH series, cpl. refurbished and available at short notice Dsdpfefcy A Hox Ad Neck

Condition: used, Year of construction: 2023, functionality: unexamined, GEA Hilge MAXA stainless steel centrifugal process pump in excellent condition. Specifications: Manufacturer: GEA Hilge Type: MAXA 200-400 CNY 200/200/55/4 Year of manufacture: 05/2023 Capacity: 280 m³/h Head: 20 m Motor power: 55 kW Siemens IE3 electric motor Speed: 1,450 rpm Stainless steel pump housing Complete plug-in unit with motor, coupling, and base frame Suitable for the food, beverage, dairy, pharmaceutical, and chemical industries The pump is sold as is, where is, without any warranty. Delivery: Dcjdpfszrm I Nox Ad Nsk EXW Rotterdam, The Netherlands, loaded onto your truck. Inspection is possible by appointment.

Condition: good (used), Year of construction: 1979, Chip conveyor STEIMEL S5, serial number 17935109, year of manufacture 1979, drum diameter 500 mm, capacity 60 liters, maximum loading capacity 100 kg. Dcjdpfx Adoztc Ins Njk

Condition: like new (used), functionality: fully functional, Graham Vacuum Pump DF/SCH00058 Type: 2 067/180 20006 171 Dcodpfoznpagsx Ad Njk ID no 12320594/1 Unused, ex stores stock. Unit was purchased as a spare, but never used.

Condition: as good as new (ex-display), Pump, Industrial Circulation Pump, WILO Close-Coupled Centrifugal Pump, 45 m³/h, 12.5 m, Used Machine Manufacturer Wilo-Werk Model IPH 80/200-3/4 Article Number 0912298 / 8610-1 Technical Specifications Maximum Liquid Temperature (t): 120°C / 140°C Maximum Operating Pressure (p): 16 / 13 bar Flow Rate (Q): 45 m³/h Dedpfxszqbtqj Ad Nock Head (H): 12.5 m Rated Speed (n): 1450 RPM Operating Voltage: 380 V Current Consumption: 7 A Actual Speed: 1410 RPM Overall Dimensions Width: 500 mm Depth: 350 mm Height: 560 mm Description Industrial WILO close-coupled centrifugal circulation pump designed for the circulation of hot water and other non-aggressive liquids in heating, cooling, and industrial process systems. The pump provides a flow rate of 45 m³/h and a head of 12.5 m, making it suitable for HVAC systems, district heating networks, industrial cooling circuits, and process water applications. Designed for continuous-duty operation, the pump can handle liquid temperatures of up to 140°C and operating pressures of up to 16 bar, ensuring reliable and efficient performance in demanding industrial environments.

Condition: used, Pump, Wilo IL80/190-18.5/2; 18.5 kW; Used machine Dcjdpfxozqbl He Ad Nsk Manufacturer: Wilo Type: IL80/190-18.5/2 Overall dimensions: Width: 510 mm Depth: 350 mm Height: 960 mm Weight: 100 kg Electrical data: 400V; 31.4A; 18.5 kW Flow rate capacity: up to approx. 2,499 l/min (≈150 m³/h). Maximum delivery head: approx. 48.5 m. Fluid temperature range: −20 °C to +140 °C.

Condition: used, This listing is for Pfeiffer MVP020 Vacuum Pump (MVP020) The unit is in full working condition and ready for immediate use Compact, oil-free diaphragm vacuum pump designed for clean and quiet operation. Ideal for laboratory processes requiring consistent vacuum such as filtration, drying, and rotary evaporation support. Robust build ensures long-term reliability with minimal maintenance. Transparency Report and Technical Audit: • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility Dsdpsy Ehpqjfx Ad Nsck • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, This listing is for Javac CC141 Vacuum Pump The unit is in full working condition and ready for immediate use This reliable, compact laboratory vacuum pump delivers consistent performance for daily scientific and industrial applications. Built with durable materials, it is easy to maintain and operates quietly Transparency Report and Technical Audit: Software and Media Disclosure: Dcsdpfx Ajzgfu Dsd Nsk As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laborator

Condition: used, This listing is for 1 of 4 Watson Marlow 323 Peristaltic Laboratory Pumps Dedpsygmdhjfx Ad Nock Each unit is in full working condition and is ready for immediate use The Watson-Marlow 323 is a peristaltic laboratory and process pump designed for precise, controlled fluid movement, dosing and metering of liquids in scientific, pharmaceutical, biotechnological and industrial environments. It works by mechanically squeezing a flexible tube in a circular “rolling” action — this moves the liquid without it ever contacting internal pump parts, which reduces contamination and wear

Condition: used, This listing is for the KNF Neuberger Diaphram Pump PM16209-122 The unit is in full working condition and is ready for immediate release Description: A compact and corrosion-resistant pump suitable for general laboratory use. Dodpfoxv A Rbsx Ad Njck Technical Features: 100% oil-free transfer Pure transferring, evacuation, and compression of gases Version for slightly aggressive or corrosive gases and vapours Maintenance-free Environmentally friendly Gastight, leakage rate approx. 6 x 10⁻³ mbar x l/s (not tested in serial production) Series N 022 diaphragm pumps are single-head, dry-running devices designed for a wide range of laboratory applications

Condition: used, This listing is for the Biotek Instruments Gast 7103034 Vacuum Pump 2. The unit is in full working condition and ready for immediate use. This Gast-manufactured pump provides consistent vacuum performance for laboratory applications including filtration and aspiration. Featuring a compact, oil-less design, it ensures low maintenance and clean operation. It is ideal for integration with BioTek washers or general benchtop fluid management. Transparency Report and Technical Audit: - Source Pedigree: Biotech / Research Facility - Condition: Direct-from-Bench (Decontaminated/Original) - Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. - Integrity: 100% Original Parts (Non-Refurbished) - Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Dsdpfxsywzgte Ad Njck Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.