Used Double Head Mitre Saw for sale (27,945)

Year of construction: 2005, condition: good (used), I sell the double mitre saw OMGA TRF 527, year 2005. Ledpfxjg Tumce Agzohr Cutting length 390 - 2800mm Cutting width max. 170mm Cutting height max. 90mm Tilting heads 0 + - 45° 2 Horizontal + 2 Vertical pneumatic Material pressures 2 Motors x 1,62kW (2,2 HP) Good condition. Available immediately.

Year of construction: 1992, condition: used, machine/vehicle number: 7375, cutting length: 5000 mm disk of circular saw-Ø: je nach Bedarf 420 - 500 mm Lsdpfx Agsz E Snezohr space needed: 6400 x 1400 x 1700 mm weight: ca. 1600 kg

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1049333220, cutting length (max.): 4,500 mm, saw blade diameter: 420 mm, double mitre saw 4,5 m D=420mm; E 355; 22,5° inside second-hand, year of manufacture: 2008 M-No.: 1049333220 - cutting length 4.500 mm - saw blade diameter 420 mm - Swivel range inwards, pneumatic 90° - 45° (up to 22.5° manual with digital display) - External dimension cutting for all cutting variants. This eliminates the need for length calculations necessary. Great advantage for special angles. Positioning control E355 - Drive-independent measuring system - Positioning accuracy +/- 0.1 mm per meter - Pneumatic locking in position - 5" matrix display with membrane keypad and handwheel for navigation in the operating menus - Memory for 999 data records Correction values for profiles - The record memory can store the record number, length dimension, profile number, angle position and number of pieces can be saved - Switch to 2nd language - Switchover mm/inch - RS 232 interface Technical data: Ljdpfxeuw T Sto Agzohr Smallest cutting length at 90°: 335 mm Smallest cutting length at 45° inclination: 335 mm Voltage: 400V, 3 PH, 50 Hz Power output per motor: 4 kW Compressed air connection: 7 bar Air consumption per work cycle without spraying: 40 l with spraying: 64 l Accessories supplied: 2 carbide saw blades for aluminum and PVC (used): 420 mm diameter, 96 teeth Dosing spray device The following accessories are also included: 1x mobile workpiece support

Condition: ready for operation (used), Double mitre saw from Haffner, type 189, immediately available. Technical data: Saw blade diameter 330 mm, max saws distance at 90°: 3,330 mm, cutting height at 90°: 90 mm, cutting width: 220 mm, cutting height at 45°: 40 mm, min saws distance at 90°: 360 mm. Saw blades tiltable up to 45°, intermediate support, saw units swiveling, saw blades tiltable, pneumatic clamps, top-cutting design, manual width adjustment. Weight approx. 380 kg. Required space: length 1.2 m, width 3.8 m. The machine is in excellent technical condition and can be inspected at any time. Nationwide delivery by freight forwarder possible. For questions, simply call or write. Maschinenhandel Nord, Gerstenstraße 2, 17034 Neubrandenburg. All prices net plus VAT – subject to errors. Lhsdpsxk Tvkjfx Agzer

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 0799336047, Elumatec double mitre saw Lhsdjxf Dugepfx Agzsr

Condition: not inspected (used), Double mitre saw Manufacturer: Pertici, Model: Univer 502D2, Year of manufacture: unknown, Saw blade diameter 500 mm, pneumatic clamping, extraction connection, digital display, cutting length 360 mm to 6,000 mm, cutting width 150 mm, saw blades tiltable 90/45 degrees, automatic feed, material feed 4,000 mm Lodpexfi U Sefx Agzohr

Condition: used, NC Multi-Blade - Double-Blade Saw for Light Metal MIKSITZ Year of manufacture: 1991 Circular saw, aluminium circular saw, table circular saw, mitre saw For cross-cutting and notching aluminium profiles Saw blade travel: 500 mm Max. cutting height: 100 mm Saw blade speed: approx. 5000 rpm Installed saw blade diameter: 300 mm Max. saw blade diameter: 400 mm Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz Table size: 1100 x 1100 mm Table opening: 300 x 1100 mm Working height: approx. 1100 mm Tool holder: SK40 - Several saw blades can be mounted on a single work shaft with double-sided bearing Lhsdpfjdzp Snsx Agzor - A long SK40 arbor serves as the work shaft - Belt drive between the drive motor and saw shaft - Table height adjustable via hand crank (to set cutting depth) - Fixtures and stops can be mounted on the table - Saw blade movement via ball screw spindle with servomotor - Single-axis NC control for the cutting movement, LENORD + BAUER type GEL 7541.0000 - Separate control cabinet Space requirement (L x W x H): 1800 x 1600 x 1700 mm Weight: approx. 1100 kg

Condition: good (used), Year of construction: 2009, Ideal for processing insect protection systems! For saw blade D 500 mm, cutting length 5,000 mm Double mitre saw with pneumatically outward swiveling heads, designed for cutting aluminum and PVC profiles. The movable right saw unit automatically positions itself to the profile length entered in the control system. In addition to all required safety devices, the scope of delivery includes both vertical and horizontal clamping devices. Swiveling of the heads Ljdpfx Ajxgpvregzohr The units swivel via pneumatic cylinders. Mitre cuts from 90° to 22.5° outward are possible. Intermediate angles can be set manually using a corresponding stop. The cutting area is equipped with protective hoods that open and close automatically. Profile support roller conveyor at the movable unit with clamping device Spray mist system Macro function included A suitable extraction system is also currently available as an option!

Condition: used, functionality: limited functionality, cutting height (max.): 90 mm, cutting width (max.): 140 mm, cutting length (max.): 2,820 mm, total width: 950 mm, total length: 3,600 mm, total height: 1,250 mm, saw blade diameter: 300 mm, type of input current: three-phase, rotational speed (min.): 3,000 rpm, OMGA TR2-A Double Mitre Saw for Wood and Aluminium Specifications: • Condition - used, requires adjustments and minor repairs • Manufacturer - OMGA Lsdexl Ecxspfx Agzshr • Model - TR2-A • Main motors - 2 x 2.2 kW (3,000 rpm) • Pneumatic head control • Max cutting length - 282 cm • Min cutting length - 15 cm • Max cutting cross-section - 90x140 mm (at right angles) • Max blade diameter - 300 mm • Extraction nozzles diameter 80 mm • Angle cutting range from -45 to +45 degrees (right, left) • Vertical clamps for material hold-down • Weight - approx. 600 kg • Overall dimensions - 360 x 95 x 125 cm (L x W x H) Additional information: • Machine operational but requires minor fixes and adjustments • Provided photos show the actual condition of the item for sale • Possibility to power up and test the machine on site

Condition: new, Year of construction: 2025, functionality: fully functional, Stock machine: Subject to prior sale - Glass bead saw / double mitre saw Exenso DS350 - 3,000 mm for wooden glass beads, glazing bars, profile strips, aluminium trims, etc. Swivel range from 22.5° (internal) to 135° (external) Right-hand head is movable. Saw blade holder Ø 350 mm Working length 3000 mm - Includes 1 central support. - Pneumatic clamping of the units. Lhedpfxsw Exaas Agzsr - Positioning control Exenso DS3 with touch panel - 15" display in dust-protected monitor housing. - 3-axis control: 1 longitudinal axis and 2 swing axes. - Manual input of cutting data - Processing of data from a cutting list (data records as specified) - Processing of measuring gauge data (wireless GMF caliper) - Ethernet connection 10/100 (TCP/IP) - USB interface - Includes control cabinet, motor and software licenses. 1.2 723.0121 DS/ES saw blade for wood, 2 pcs. 1.3 942.5997 DS Pneumatic feed device, 1 set 1.4 942.5236 DS Combined workpiece clamp, 2 sets 1.5 942.5241 DS350 Grooved table supports, 1 pc. 1.6 945.1022 DOCUMENTATION AND USER INTERFACE DEU or ENG

Condition: used, Year of construction: 1990, cutting diameter 500 mm cutting length 5000 mm Lodpfx Agev U Dluezohr saw blade diameter 420 - 500 mm dimensions ca.6400 x 1500 x 1600 mm weight ca. 1600 kg feed stufenlos Motorized length adjustment with digital display manual and spare part list included

Condition: new, A twin blade saw that has been specifically designed for cutting glazing beads accurately to length, with either a straight or mitred cut. The machine has two work-levels one set above the other, allowing two lengths of beading to be cut simultaneously. The two lengths of bead are held secure during the cutting operation by the front pneumatic clamps. Setting the correct length is achieved by means of handwheel moving the left head in relationship to the fixed right head, the length is easily read from the mechanical digital display. Lhodpfx Asdy Hqvsgzor Min/Max. cutting length 150mm - 2400mm Max. cutting section at 90° 55 x 100mm Max. cutting section at 45° 40 x 100mm 2 x sawblades dia. 220mm x 30mm bore Motor 1.6hp, 3 phase CE Safety requirements

Condition: used, saw blade diameter 370 mm cutting range round 115 mm cutting range square 105 mm cutting range flat 70 x 240 mm cutting length min. 730 mm cutting lenght max. 4000 mm saw blade turning speeds 1250 / 2500 U/min table rotating 180 ° stroke 120 mm feed stepless 0 - 500 mm/min coolant Lhodpfod Il A Iox Agzer capacity 45 degrees: square 95 mm capacity 45 degrees: flat 50 x 200 mm cutting speed 1250 / 2500 m/min weight of the machine ca. 1,1 t dimensions of the machine ca. 5,00 x 1,30 x 2,00 m Double Mitre Saw for aluminium consits of two SKL 370 Circular Saws on common rails, one saw fixed one saw movable. - Serial No.: 28232 / 28233 - pneunatic clamping of workpiece - coolant equipment

Year of construction: 2008, condition: excellent (used), Double-head band saw LIGNUMA MM-700/2 PION – Polish production TECHNICAL PARAMETERS: min. diameter of the processed log 150 mm Lhodpsi Ezwmofx Agzor max. diameter of the processed log 600 mm min. length of processed log 1200 mm max. length of processed log 3000 mm input table length 3500 mm main engine 2 x 11 kW feed motor 0.75 kW cutting system adjustment motor 2 x 0.37 kW smooth feed adjustment band saw length 4010 mm band saw width 32 - 50 mm band saw thickness 0.9 - 1.25 mm module 22.2 mm cutting thickness programmer hydraulic tensioner of the band saw dimensions (length/width/height) 6000 / 2600 / 2100 mm weight 1700 kg

Condition: excellent (used), Year of construction: 1998, cutting diameter 150 mm cutting range min. 150 mm Ljdpfsvwgnwox Agzehr saw blade diameter 400 mm cutting length min. 420 mm cutting lenght max. 4000 mm dimensions of the machine ca. 4800 x 1100 x 1500 mm The double tiller saw is in very good condition and has only been used very little use.

Year of construction: 1991, condition: like new (used), Machine is fully functional. Now is in stock. Lhodehvrz Tspfx Agzjr 6.000 mm

Condition: ready for operation (used), Year of construction: 2017, operating hours: 2 h, functionality: fully functional, machine/vehicle number: LM 500 W6-P, A Plasmek Plastic Makinalari LM500 W6-P wrapping machine is for sale due to lack of use. The machine has virtually zero operating hours and has not been used. All parts and accessories are included. Lhsdpfx Ajw H Rpvjgzer

Condition: like new (used), Year of construction: 2019, functionality: fully functional, cutting length (max.): 10,000 mm, feed length X-axis: 5,000 mm, saw blade diameter: 500 mm, air pressure: 6 bar, Emmegi Classic Magic 500 5 Meter Year built: 2019, as new condition - LCD display with backlighting - Pre-installed interface for industrial label printer connection - USB port - Capability for single cuts - Storage for 99 profile correction values and automatic calculation of cutting lengths for miter cuts - Storage for 20 cut lists entered via the keyboard (up to 50 sets each) - Storage for 10 cut lists imported via RS232 serial interface from an external PC (up to 100 sets each) MACHINE FEATURES - Position detection of the movable unit via direct measuring system with magnetic tape - 2 carbide-tipped saw blades, diameter 500mm - Pneumatically operated full safety covers over the cutting area - 2 pneumatic horizontal clamping units with low-pressure safety device - Profile support roller conveyor - Lubrication system: mist spray or minimum quantity pulse spray system (depending on version) - Cuts with saw blades Ø 500 mm in the miter range from 22°30’ (external) to 90° - Manual profile support - Pre-installed interface for automatic activation of MG4 chip extraction unit - Two standard profile inserts - Metric scale - Label printer incl. label peel-off function - Overlength cut - Shortcut - Cross cut - Macro Lhodpew Svxlofx Agzer - Automatic cut - Pro software package

Condition: good (used), Year of construction: 1997, Double mitre saw RAPID DGS 200 year of construction 1997 drive 2 x 2,2 KW, 400 V Ljdpshctt Ejfx Agzehr swivelling range manual 45° to 90 Saw blade 420 mm Ø Saw feed pneumatic cutting length 4000 mm Profile clamping 2 pcs. horizontal clamping cylinders 2 vertical clamping cylinders Length adjustment manual Length display digital Air pressure 7 bar Profile support fixed outside and movable in the middle dimension L/W/H 5200/1200/1500 mm Weight 800 kg

Year of construction: 2020, condition: ready for operation (used), Saw blade diameter: 2x400mm, max. cutting length: 4000mm, cutting angle: +/-45°. Documentation available. On-site inspection is possible. Lhjdswfg Hbjpfx Agzsr

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 007707133, saw blade diameter: 550 mm, rotational speed (max.): 2,800 rpm, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Tool diameter: 550 mm Saw blade speed: 2,800 rpm MACHINE DETAILS Total weight: 1,400 kg Air requirement: 200 Nl/min Operating pressure: 6 bar Further information according to the manufacturer - without guarantee Lhjdpfx Aswhdnzjgzor Control: R 700 Angle adjustment: 45°-90° Cutting length: min. 3,700 mm Dimensions: 5.4 x 1.4 x 1.9 m at a cutting length of 3,700 mm Weight: 1.4 t

Year of construction: 2023, condition: new, functionality: fully functional, Description Double mitre saw RAPID DGL 200 M Working length: 5,100 mm Working height: 160 mm Can be swiveled: yes Aluminum spraying device available Short dimension stop available Socket for external extraction available Vertical clamping device available Roller conveyor traveling (feed on the right) Rapid DGL 200 M double mitre saw ----- with saw blade diameter 500 mm, manual length adjustment with digital length display digital length display, pneumatic angle adjustment 45° and 90°, Simple operation and top quality ----- For precise and low-burr cutting of aluminum, plastic and wooden profiles. System features: ----- - Manual length and angle adjustment - Saw blade Ø 500 mm - Extremely stable machine bed - Complete grip of the guide bushes around the guide shafts of the saw head - Hardened guide shafts - Swivel axis mounted on both sides Digital length display: ----- Perfect dimensional and angular accuracy guaranteed. ----- To achieve this, we use precise and efficient movement technology: Ball bushing guides for length adjustment, spring suspension of the swivel units for convenient and safe angle adjustment between 45° and 90°. The length and angle of this two-head mitre saw are adjusted manually. Lsdjtdgitopfx Agzehr Greater ease of use and increased performance can be achieved with the aid of a digital length display and pneumatic swivel device. A wide range of profile systems can be processed with 500 mm saw blades. can be processed. Technical data ----- Drive: 2 x 2.2kW three-phase 400 volt motors Swivel range: manual 45° to 90 Saw blade: 500 mm diameter Cutting lengths: 5,100 mm, Profile clamping: 2 horizontal clamping cylinders Length adjustment: manual Air pressure: 7 bar Dimensions: 5250/1420/1900mm weight: 1.260kg

Year of construction: 2000, condition: good (used), Power: 5.5 kW Weight: 2,200 kg Ljdpfx Aew S Nycegzshr

Condition: good (used), Used for plastic profiles Max. cutting length 3200 mm Lhjdpfewdfqpox Agzer Further details available upon request

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Offer – Double Mitre Saw Emmegi Norma 400 We are pleased to offer you the Emmegi Norma 400 double mitre saw – a precise and reliable machine for professional cutting of aluminium and PVC profiles. Technical Data: - Saw blade diameter: Ø 400 mm - Cutting length: up to approx. 4,000 mm, minimum length approx. 485 mm - Saw head swivel range: ± 45° (inwards/outwards) - Drive: Hydropneumatic feed, motor power 2.2 kW per head, braking time approx. 10 s Lhjdpfxew R T Tqe Agzjr - Workpiece clamping: Pneumatic, horizontal and vertical, with 'low pressure' safety feature - Cooling: Oil-water micro-mist system