Used Dowel for sale (367)

Condition: good (used), Year of construction: 1989, double-sided processing from 280 to 2500 mm Dcedpfx Acozzprpepjn the following equipment is available on each side: saw drilling head with 3 drills dowel inserter 3 drilling units from above, at the front 2 drilling units from above, at the rear return transport from below

Condition: good (used), Year of construction: 2009, functionality: fully functional, Dowel Insertion Machine Ganner Selekta 252 Year of manufacture: 2009 Dcjdpfx Aeycf Ikscpjn

Condition: used, Year of construction: 2014, Used Machine Year of manufacture: 2014 Condition: The machine has been factory-overhauled by Ganner Features and Technical Specifications: Complete standard configuration including: - Support with linear guide consisting of: 1 single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 blow-out, gluing, and dowel-driving station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1300 mm, travel speed max. 105 m/min. Dedpjzlbrvefx Acpecn - Z-axis manually adjustable via mechanical digital counter, position adjustable via support table 5–40 mm - Dowel drive-in overhang adjustable from 7–20 mm via a mechanical digital counter; drilling depth from 0–35 mm (for drill bit length GL 70 mm) is automatically adjusted with the drive-in overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GLUE/WATER selector switch for flushing the glue system, each with: 1 stainless steel tank for 7.5 kg of glue and 7.5 l of water - Indicator light showing remaining glue levels in the glue tank - 1 left side stop, 1 right side stop, and 1 center stop (all removable) - 4 start buttons for individual processing of 1–4 workpieces - 4 pneumatic 10° angle clamping cylinders for workpiece thicknesses up to 80 mm, workpiece length (Y) min. 70 mm - 1 extraction funnel, connection Ø 80 mm - 1 TCT control unit with: Built-in industrial PC, including Beckhoff TWINCAT soft PLC, operating temperature range 0–50°C, 15-inch capacitive TFT industrial touchscreen, operating system: WINDOWS 7 - Programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensions, automatic workpiece mirroring and operation optimization, 4 work areas assignable to different programs, graphical workpiece display, parametric programming, zero-point offset, programmable worklists, error diagnosis with plain text Optional equipment: - 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 1 Z-axis with NC-controlled, dynamic positioning for height adjustment of the drilling and dowel-driving station (programmable from 5–40 mm), travel speed max. 30 mm/sec. - 1 single-spindle vertical drilling unit drilling from the TOP, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via a mechanical digital counter from 5–40 mm, drilling depth (Z) max. 30 mm (with drill bit length GL 57 mm), Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (including drilling depth compensation, e.g., for Häfele Minifix) - 4 vertical 10° angle clamping cylinders with mount - 1 keypad with mount Availability: available shortly Location: DE-63934 Röllbach

Condition: like new (used), DEMONSTRATION MACHINE For sale is a Felder FD-21 dowel boring machine. The machine is in use in our showroom and is therefore in mint condition. Technical data: - Version with 21 spindles - 2 hold-down clamps - 2 stops, each 1.5 m, for line boring - 2 side stops with reading optics Djdpfxoxxi T Us Acpocn - Indexing system for side stop with 8 positions - Motor power: 2 HP - Year of manufacture: 2025 The machine is located in A-5431 Kuchl and can be inspected and picked up during our opening hours at any time. Subject to prior sale! Related terms: dowel milling machine, drilling machine, line boring Reference: R-A0117

Condition: used, Used dowel drilling machine, Scheer DB 12 3 drilling spindles, pitch 32 mm Maximum drilling depth: 45 mm with a drill length of 80 mm Maximum drilling depth: 70 mm with a drill length of 105 mm Operation: foot pedal Dcjdpfszpv Rzox Acpen Number of material clamps: 1 Type of material clamping: pneumatic Table size: 400x250 mm Weight: approx. 130 kg Dimensions: approx. 1350x650x950 mm Motor power: 1.1 kW

Condition: used, Year of construction: 1998, total width: 1,100 mm, total length: 1,700 mm, total height: 1,150 mm, Colour: White Empty weight: 1.100 kg - Year: 1998 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 980223 - Table length [mm]: 245 - Table width [mm]: 735 - Number of spindles [pcs]: 8 - Spindle diameter [mm]: 16 - Max. spindle speed [rpm]: 17000 - Distance between spindles [mm]: 50 - Workpiece clamps [pcs]: 2 - Workpiece support/Guide: Table - Drills included: Yes - Voltage [V]: 415 - Fuse [A]: 16 Dedpfxozvx N He Acpjcn - Power [kW]: 7.5 - Transport dimensions: 1700mm x 1100mm x 1150mm (l x w x h) - Transport weight [kg]: 1100kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1977, used manufactured by Ayen type DB 1000 K2 built in 1977 Mach.-No. 751212 number of spindles 23 piece number of drilling beams 1 drilling from top tiltable pneumatic comb lowering pneumatic drill chuck D 10 mm clamp 3 piece grid 32 mm required space ca. l x w x h mm 1200 x 800 x 1600 weight ca. 370 kg total connected power 2,2  kW Djdpevwgagsfx Acpscn located in  97447 Gerolzhofen sale in current condition as seen - free on truck -

Condition: used, Year of construction: 1979, from school operationused, good conditionmake Ayentype DB 1000 K 23year of construction 1979machine no. 7SA740GS-testednumber of spindles 23 piecesnumber of drilling beams 1spindle distance / grid 32 mmdrilling from aboveswiveling pneumatichole line drilling devicestorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Dcodpfx Asvxr Raocpon

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 508678, drilling depth: 80 mm, total width: 820 mm, total length: 1,350 mm, total height: 1,400 mm, overall weight: 450 kg, number of spindles: 21, power: 2.2 kW (2.99 HP), Universal dowel hole and line boring machine, dowel hole drilling machine, dowel drilling machine Manufacturer: Scheer Year of manufacture: 1989 Djdpfx Ajwuuxkecpocn Type: DB-5 Weight approx.: 450 kg Machine number: 508678 Dimensions: 1350 mm x 820 mm x H 1400 mm Drilling beam length: 640 mm Spindle distance min. 32 mm, max. 640 mm 21 spindles Drilling depth: 80 mm Drilling beam pneumatically swivelling Motor power: 2.2 kW

Year of construction: 1980, condition: ready for operation (used), Ayen Type DB 1000 K 23 Year of manufacture 1980 GS-tested number of spindles 23 pieces Djdpfxepgkqpj Acpocn number of drilling beams 1 spindle distance / grid 32 mm drilling from above swiveling pneumatic Hole line drilling device

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Features and technical data: 2-jaw drill chuck up to 20 mm shank diameter Pneumatic positioning adjustment on 2 levels 0-100 mm Max. drilling depth: 150 mm Precision indexing rail 12 mm Dcjdpsw I Uy Tjfx Acpon Center locking and cross adjustment 2 pneumatic safety clamping cylinders Motor 1.5 kW Speed: 2800 rpm Long hole drilling device, lowerable, with 2 program cams Machine weight approx. 310 kg Machine dimensions (W x D x H): 1100 x 1100 x 1500 mm (without stop) Availability: short-term Location: Röllbach

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Dsdpfx Aoxwaz Hscpscn

Condition: used, Year of construction: 2000, 220V, 1 phase, 50Hz Air connection: 6 bar Complete in standard design with: - Dowel feed via electronic vibratory feeder - Automatic dowel length and dowel diameter control - Fully automatic electronic control with program selector switch GLUING – APPLYING – INSERTING - 8-stage glue quantity selector switch via time pre-selection by electronic control - Closed glue system with 6 bar glue pressure via glue nozzle for glues with a viscosity of 150 to 350 mPas - Selector switch GLUE/WATER for rinsing the glue system - Control lamp for displaying the remaining glue quantity in the glue container - 1 stainless steel container for 5 kg of glue and - 1 stainless steel container for 5 liters of water for rinsing Dcjdpfx Aozktq Ijcpen including 1 gun for dowels Ø mm, dowel length 25 - 50 mm, pre-set to 35 mm, insertion overhang 7 - 20 mm Location: Nattheim

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, The HOMAG WEEKE OPTIMAT ABD 150 is a high-performance CNC machine designed for precise drilling, dowel insertion, and hardware fitting in furniture production and panel processing. This machine is ideal for cabinet makers, furniture manufacturers, and industrial woodworking operations requiring accurate and efficient automated processing. Dcedeym Nvtjpfx Acpsn The machine features: CNC-controlled drilling and inserting unit Integrated glue and dowel insertion system Robust industrial construction Compact footprint Easy-to-use control panel CE certified The machine has been regularly maintained and is ready for operation.

Condition: excellent (used), Year of construction: 1982, with 2 drilling beams Used, good condition Make Scheer Type DB 3 Year of construction 1982 Machine no. 73021 Number of spindles: 25 Number of drill beams: 2 Spindle spacing/grid: 32 mm Djdov Trlmspfx Acpecn Drilling from above Hydraulic feed brakes: 2 Linear stop: 1 approx. 2500 mm Working width: approx. 800 mm (768 mm) Drilling depth: approx. 100 mm stroke Drill chuck: M 10 Pendulum stops: 3 Clamps: 3 Drill programs: 4 Space required: approx. 1400 mm x 1300 mm x 1800 mm Weight: approx. 1000 kg Location: Arrives at the end of April at warehouse 54634 Bitburg - free on freight - Handed over in the current condition, as seen, without overhaul, without warranty or guarantee

Condition: good (used), Year of construction: 1980, Dowel drilling machine for frame production Dcjdpfsyy I Snox Acpon

Condition: used, Scheer DB 5 dowel hole drilling machine for the precise and rapid drilling of dowel holes (horizontal and vertical) in solid timber and board materials. The machine is ideal for mass production in furniture manufacturing as well as for precise joints in interior fit-out work. Includes a comprehensive range of dowel bits. Technical data: - Drilling spindles: 21 - Pitch: 32 mm - Passage width: max. 1,000 mm Dedjztvx Tspfx Acpocn - Swivel mechanism: pneumatic - Fax: , Mobile: , Machine No. 208695, Jan 2011, Cost price €1,000 - D-89440 Lutzingen, Tel. , Fax: , April 2015, purchase price €500

Condition: used, Year of construction: 1989, with many drills used, top condition Machine cleaned, partially overhauled, lubricated, made operational, test run performed. Make: Hoffmann Type: DB 23 Dcodsvyurcspfx Acpjn Year of manufacture: 1989 Machine no.: 169 Number of spindles: 23 units Number of boring beams: 1 Spindle pitch / grid: 32 mm Drilling from below, stroke: 60 mm Stop rulers with central adjustment Working width: 704 mm (1080 mm with portal clearance) Drilling depth: 70 mm horizontal Drill holder: M 10 / Taper 30° Space requirement approx. 1300 mm x 1000 mm x 1300 mm Weight: approx. 500 kg Location: 97447 Gerolzhofen, free loaded, unpacked Handover in as-inspected condition, without warranty or guarantee.

Condition: used, Second-hand machine Features and technical specifications: - Universal dowel drilling machine for horizontal and vertical drilling - Working width 720 mm - with drilling beam, drive motor 3 PS, 2800 rpm Djdpszk N Atsfx Acpjcn - 23 drilling spindles, drilling pitch 32 mm - Pneumatic workpiece clamping via foot valve - 2 stop rails, 1000 mm - with chassis Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 1983, with 2 drilling beamused, good conditionmanufactured by Scheertype DB 3built in 1983Masch.-No. 83120number of spindles 25 piecenumber of drilling beams 2Spindelabstand / grid 32 mmdrilling from tophydraulic feeder brake 2 pieceguide fence 1 piece ca. 2500 mmworking width ca. 800 mm (768mm)drilling depth ca. 100 strokedrill chuck M 10pendulum fence 3 piececlamp 3 piecedrilling programs 4 piecerequired space ca. 1400 mm x 1300 mm x 1800 mmweight ca. 1000 kglocated in 97447 Gerolzhofen, free on truck, unverpacktsale in current condition as seen,without revision,without guarantee and Gewährleistung Dcedpfx Aevwf N Hecpsn

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Drilling machine with automatic angle adjustment Dcodjy Iaizspfx Acpon

Year of construction: 2013, condition: used, We are offering this used TE Connectivity Insertion Machine P 300 pin inserter, year of manufacture 2013. Operating condition: "System functionality is no longer fully ensured. Functional limitation: After switching on, automatic initialization/homing does not work." If you are interested, we are certainly open to negotiating a price. Machine type: Insertion Machine P 300 Serial number/part number: 1-1372900-4 Manufacture date: 01/2013 Supply voltage: 230 V Phases: 1P~ Frequency range: 50/60 Hz Rated current: 2.5 A Max. current: 10 A Short-circuit current: 50 kA Required air pressure: 6 bar Dcedpsy R I Uwefx Acpon Weight: 1600 kg If you have any questions or need further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2008, I sell the complete set of machines for production of wooden dowels. Year: 1993 - 2008 Dcsdpfx Acst I U Amjpsn Brusa di Garboli TA30 L.Loser AA200 Moulders Cutting machines with feeders Cylinder sanding machines Totally 10 machines. Suitable for dowels 6-8-10-12-16mm. Very good condition. Available immediately

Condition: used, Used dowel drilling machine Ayen Type DB 1000-B23 for drilling operations in the production of dowel joints in woodworking. The machine features a working width of 720 mm, a maximum clearance of 820 mm and different drilling depths for vertical and horizontal machining. Technical data: Dedpfx Ajzryr Ujcpecn - Working width: 720 mm - Max. clearance: 820 mm - Drilling depth, vertical: 45 mm - Drilling depth, horizontal: 120 mm

Condition: used, Year of construction: 2024, DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support designed for row drilling positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of drill bits for dowels: - 5 carbide dowel drill bits, Ø 8x77 mm, right-hand - 4 carbide dowel drill bits, Ø 8x77 mm, left-hand Basic machine DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support des Dcjdpfsxnlflsx Acpon