Used Ewd Gatter for sale (18)

Condition: good (used), 2 pieces of frame stands. Oscillating shaft and overhung shaft. 2 pieces of split lower frame rollers. Shafts and bearings for rollers. Guide bracket, etc. Iodpfxjwwr Eaj Afketn

Condition: good (used), Saw frame, guide rails, connecting rods, feed rollers, new roller shafts, racks, new rack heads, roller lifting hydraulic unit, gang saw frame stand with overhang plates, gang saw flywheel assembly, tight pulley and free-running pulley with bushing and many more parts Itjdpfswhv Rnex Afksn

Year of construction: 1999, condition: ready for operation (used), Linck EWD pre-cutting group consisting of: - Linck EV 40 infeed table, with 1x pair of turning rollers - EWD FZ 3 (mounted on PF19 frame with guide shafts DM 200mm) 2x drive motors with 75/45kW. 1 pair of pull-out rollers - Centering unit EVW - FR 14 side cutting saw with limit cutter 4 x 50KW + 2x 75kW - Side fabric separating transport - incl. hydraulic unit - without switch cabinets Machine is in very good condition! System can also be overhauled and offered with a new control system! Itodpfjufr Ndox Afksn

Year of construction: 2012, condition: like new (used), EWD roller table with transverse haul-off Itedsglugyopfx Afkjn length 6500mm Width over all 2000mm Roller shell length 1200mm

Condition: good (used), Year of construction: 1977, functionality: fully functional, High-Performance Frame Saw / HIGH SPEED FRAME SAW EWD HDN 600 Year: 1977 / Good condition, continuously maintained (can also be fully overhauled and brought up to the latest standard upon request!) TECHNICAL SPECIFICATIONS: Well-maintained high-performance full frame saw Frame width: 710 x 735 mm Stroke: 600 mm Speed: 310 rpm Fully hydraulic with automatic overhang adjustment Hydraulic saw tensioner and saw mounting Itsdpew S S A Hofx Afksn Drive motor and intermediate gearbox Electrical control cabinet with PLC Splitter wedge type AVER, hydraulically driven In very good condition! (Machine can also be delivered fully overhauled if required!) Top condition with remote-controlled carriage 3. Double Edger / Edger Paul KME II with Conveyor Belt KME II, Year: 2010 (As new condition) Cutting height: 125 mm Working width: 750 mm Drive power: 38 kW 4. Complete Waste Disposal with Metal Detector Chipper Rudnick & Enners TH150/500/3 With conveyor belts for material removal and processing Equipped with metal detector for safety and quality of finished products 5. Summary The entire line is in excellent condition and can be inspected at any time. All machines are well maintained and fully operational. 6. Inspection and Contact The machines can be viewed at any time. For further questions or to arrange an inspection appointment, please do not hesitate to contact us.

Condition: reconditioned (used), Year of construction: 2022, EWD WD frame saw system Type GUS 71 oscillating frame saw, overhauled in 2022, consisting of: Hydraulic quick-clamp carriage H 32 III with auxiliary carriage H 25 V Oscillating frame saw GUS 71: Frame size 710 x 710 mm. Stroke 500 mm. Speed 310 rpm. Fully hydraulic with oscillating frame and automatic overhang adjustment. Hydraulic saw tensioner. Saw blade hanger Jansen No. 10, insertion lugs. Motor and speed reducer. Electrical control cabinets and operator panels. Splitter wedge S 3 G with pressure rollers and spring-loaded flaps. Isdpfxsw Agtij Afkjtn Rails for clamping carriage. Saw system was overhauled in 2022 and not installed. The saw fits onto the base plate of WD/GXW/GXV etc.

Condition: ready for operation (used), For sale is a complete log yard with long log feed, Nicholson A6/35'' debarker and Baljer Zembrod OBX V-24 bridge crane with up to 200 meters of rail. Itsdpfjwxndnox Afkjn

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER SS 71 or SS 56 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. 1 set of upper guide shoes, bore 110 mm Ø, height 250 mm 1 set of lower guide shoes for bearing 6210 for SS 56 Iodpfx Afow Eu Akekotn

Condition: used, EWD EW1000 solid band saw carriage for log band saw Hydraulic log band saw carriage 5 clamping blocks Double V-turner Rind turner hydraulic system Control boxes Distance to saw blade max. 1000mm Claw opening 900mm Distance between the clamping blocks: 1000mm - 1450mm - 2050mm - 3000mm Distance between the outer clamping blocks 7500mm Ijdjqwnziepfx Afketn Track width 1300mm Total length 9000mm Total width 2450mm total height 1750mm immediately available already dismantled and ready for loading without saw, without saw stand

Condition: used, Year of construction: 2010, functionality: fully functional, cutting length (max.): 7,000 mm, cutting height (max.): 1,000 mm, cutting width (max.): 1,000 mm, saw drive: 132 W, saw band length: 11,500 mm, saw band width: 250 mm, Equipment: cabin, documentation/manual, LOG BANDSAW TECHNOLOGY EWD - EBBV1800R-17 Fully functional sawmill line for processing soft logs. EWD double-sided band saw Optimes Esterer plastering saw Scattering saw Conveyors for removing cuttings to the drum chipper Sawdust separation Sorting of lumber by length Iodpowgk Tzjfx Afketn Containers for chips and sawdust. More information on request.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Double hemmer and circular saw with electronic control consisting of: Linck curved conveyor for separating boards and models, very stable RET straightening and feed table. Chain bed in front of the machine with pressure roller that can be raised and lowered. Laser unit. DK 90 L 1000: passage width 1000 mm. Cutting height 125 mm. Feed frequency-controlled up to 100 m / min. Automatic roller height adjustment with roller pressure. Width adjustment hydraulic, electronic positioning control with the following setting options: Continuous, cm-locking and switchable 2 cm-locking. Cutting width between the flanges 24 - 440 mm. 10 changeable fixed dimensions, direct dimension input in mm. Constant dimension allowance, shrinkage dimension allowance as a percentage. Separating wedge pair 1x zero line, 1 x separately hydraulically adjustable, with electronic positioning control. Separating wedge opening 48 - 600 mm. Chain bed on the cut-out side. 90 KW motor with power belt drive. Hydraulic unit. Splinter separator ASV DK II with 2 separating lamellas. Electrical control cabinet with power unit and PLC control. Control panel. Slatted bushing 403 mm clamping length. Adjustment and zero bushing. Professionally dismantled and loaded onto a truck free of charge. Isdpfswn D Izjx Afkstn

Condition: ready for operation (used), 18 pcs. upper eccentric push-in hangers with plane-ground hanging boxes 110 mm wide suitable for gang saw ESTERER HD 30 or EHD 30, 14 pcs. lower push-in hangers 110 mm wide, 90 pcs. upper tube spacers 108 mm Ø with spring rod suspension 9 mm to 204 mm wide, 80 pcs. lower tube spacers 108 mm Ø with supports 9 mm to 204 mm wide, 70 pcs. inserts, 20 pcs. new replacement spring rods Iodjigqrfopfx Afketn

Condition: excellent (used), functionality: fully functional, Base plate for Esterer sash cutters type SS 71 or HD 71 with main shaft and bearings. Equipped with full and idle pulleys. Itjdpfx Ajth Udmjfksn

Year of construction: 1998, condition: excellent (used), functionality: fully functional, Very stable creel roller conveyor with hydraulic lift and lowering cross conveyor. 1st part: Length 7,100 mm. Roller length 2,000 mm. Roller diameter 220 mm. Overall height 1,000 mm. Built-in hydraulic lifting and lowering cross conveyor With 4 chain strands. Spacing: 1,500 - 1,300 - 1,000 mm. Fully plated. Hydraulic model support rollers. Drive via geared motor. New bearings. Ijdpfxet Hg Huo Afkstn 2nd part: Length 7,200 mm. Roller length 1,600 mm. Conveyor length 6,100 mm. Built-in hydraulic lifting and lowering cross conveyor with 6 chain strands. Unsupported, it is possible to convey the cut material under the roller conveyor to the left or right. Fully plated. Including hydraulic unit for both roller conveyors.

Condition: excellent (used), functionality: fully functional, Complete hydraulic feed unit for EWD Esterer creel type HDE. Very well maintained. Infinitely variable from 0 - 12m / min. Isdpfxsrrxtpj Afketn

Condition: excellent (used), 2 pieces stilts for Esterer creel type EHD 30. Only 6 years in use. Ijdpfx Aoip Uf Ujfkjtn Also for other Esterer creel types stilts and spare parts available.

Year of construction: 1990, condition: excellent (used), 1 piece mass balancer for creel. With complete accessories and attachments. Little been in use. Itjdpfsfm Ev Rox Afkjn

Condition: excellent (used), Spare parts for creel LSH 65, partly as good as new, new and used. Swing, stilts, hydraulic cylinders, chain drives, feed gears, guides, solenoid valves, overhang parts. Saw frame top and bottom, Saw hook with insert hinges. Pulleys. Itsdpfsi T Egpox Afken Spare parts also available for Esterer sash gang SS 71.