Used Doweling Machine for sale (91,481)

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, throat depth: 2,005 mm, drilling capacity: 55 mm, spindle speed (max.): 1,200 rpm, column diameter: 360 mm, stroke length: 855 mm, TECHNICAL DETAILS Drilling capacity in steel (diameter): 55 mm Boring capacity: 80 mm Thread cutting: approx. M40 Arm reach min.: 320 mm Arm reach max.: 2,005 mm Column diameter: 360 mm Boom travel: 855 mm Clamping surface: 1,000 mm - 1,700 mm Automatic feeds: 0.06 - 1.00 mm/rev Spindle speed: 30 - 1,200 rpm Spindle taper: MT 5 Drive power – spindle motor: 400 V / 5.5 kW Quill stroke: 240 mm Spindle to base plate: 1,000 mm - 1,700 mm MACHINE DETAILS Dimensions & Weight Dimensions: 2.99 m x 1.12 m x 2.85 m Machine weight approx.: 4,800 kg EQUIPMENT Electric central clamping Nlodpfxjxn Nbdj Agzoh Box table Hydraulic vice Coolant device

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling depth: 600 mm, rotational speed (max.): 6,000 rpm, center height: 250 mm, controller model: SIEMENS Sinumerik 840 D, workpiece diameter (max.): 25 mm, No reserve price – guaranteed sale to the highest bidder! The machine has been completely overhauled! Nlodpfxsxpvbtj Agzoh TECHNICAL DETAILS Working depth: 600 mm Working diameter: 4 – 25 mm Number of spindles: 2 Centre height: 250 mm Centre distance: 203.2 mm Speed range: 1,000 – 6,000 rpm Feed rate: 0 – 300 mm/min Rapid traverse: 6,000 mm/min MACHINE DETAILS Control system: SIEMENS Sinumerik 840 D (Retrofit) Drilling system: Single-lip deep hole drilling Main drive: 2 x 5.5 kW EQUIPMENT - Single functions for machine setup - Semi-automatic operation for manual loading - Robust spindle carriage - Machine monitoring with spindle speed display - Table plate in special cast design - Safety guard with sliding door - Machine bed with hardened and ground linear guides - Internal coolant supply through drilling spindle - Electrical equipment according to IEC standards - Separate control cabinet with safety devices - Control panel in working area

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 1,390 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 540 mm, table load: 1,500 kg, controller model: Heidenhain TNC 355, TECHNICAL DETAILS Travel X: 1,390 mm Travel Y: 710 mm Travel Z: 540 mm Table width: 560 mm Table length: 1,800 mm Table load capacity: 1,500 kg Tool holder: SK50 Speed range: 45 - 2,240 rpm Vertical speed: up to 2,800 rpm Feed range: 3 - 2,000 mm/min MACHINE DETAILS Control: Heidenhain TNC 355 Main drive: 18.5 kW Transport dimensions & weight Transport dimensions (L x W x H): 2.7 x 3.0 x 2.9 m Transport width with X-axis drive removed: 2.45 m Machine weight: approx. 5.5 t EQUIPMENT Rapid traverse on all 3 axes Nedpfxexn S Sfe Agzolh Swivelling milling head +/- 45°, including quill stroke 90 mm Swivelling bracket for vertical milling head Swivelling counterholder for horizontal milling arbors Electromechanical tool clamping Manuals

Year of construction: 2014, operating hours: 78,610 h, condition: ready for operation (used), This Netstal EVOS 5500-2900 Speed was manufactured in 2014. Ideal for high-speed plastic processing, it ensures efficient operations with its robust design. If you are looking to get high quality injection molding capabilities consider the Netstal EVOS 5500-2900 machine we have for sale. Contact us for more information. Application Types Nljdpfx Agexpywfszsh Injection Moulding

Condition: used, machine/vehicle number: 007329, X axis working area: 3200 mm Y axis working area: 1850 mm Working Table: Pod and Rail Nedpfx Agoxn Nfvszolh Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Number of controlled axes: 3 axes Total number of drilling spindles: 31 Total number of tool changer positions: 10

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 50, laser power: 20,000 W, pipe diameter (max.): 20 mm, cutting speed: 100 mm/min, workpiece weight (max.): 1,500 kg, power: 20 kW (27.19 HP), total length: 260,000 mm, warranty duration: 60 months, cutting height (max.): 360 mm, working range: 360 mm, HSG TX3R Professional heavy-duty tube laser cutting machine 6000W-20000W Model: TX3R Power: 6000W-20000W X/Y-axis Positioning Accuracy: ±0.05mm/m Cutting Capacity of Round Tube: Φ20-Φ360mm Cutting Capacity of Square Tube: □20*20-□360*360mm Weight of Single Tube: 1200kg Njdpjrtiinsfx Agzslh

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, turning length: 600 mm, turning diameter: 400 mm, spindle bore: 73 mm, controller model: ELTRO MPULS, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning diameter: 400 mm Turning length: 600 mm Swing diameter: 600 mm Spindle bore: 73 mm Nledjxn I Sbspfx Agzjh MACHINE DETAILS Control model: ELTRO MPULS

Condition: used, Year of construction: 2024, INDEX MS22-8 Mfd. 2024 2 NCU (4) Y-Axis SL Control Cutting hours: 1,000 Turnkey Available Located in Europe 4-Meter IEMCA SIR MS22-8/43/P Rack loader 50 Hz D9-13-19-25 Bar length 4300 mm with drilling unit and minimum quantity lubrication unit additional end-of-bar sensor Bar stock 500mm (D12-D24) Bar stock 340 mm (D5-D11). Additional storage chain for 22 bars with Profinet interface. 1 11007253 (21711) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D7-D10 mm, internal clamping for bar stock diameters D13-D18 mm, consisting of: Njdpjxnrtcjfx Agzslh 8 bar stock pushers D12 8 rotating sleeves D12 1 10287026 (21712) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D11-D16 mm, internal clamping for bar stock diameters D19-D24 mm, consisting of: 8 bar stock pushers D18 8 rotating sleeves D18 1 10536056 (21713) 1 set (8 pieces) bar stock pushers for bar diameters D17 mm-D22 mm, consisting of: 8 bar stock pushers D23 8 rotating sleeves D23 1 10414481 (21702) 1 set (8 pcs.) of internal clamping sleeves D12mm for bar diameters D13 mm - D18 mm Drill diameter D8 mm. 1 10472413 (21704) 1 set (8 pcs.) of external stops D12 mm for bar diameters D13 mm - D18 mm pre-machined. 1 10264327 (21703) 1 set (8 pcs.) of internal clamping sleeves D18mm for bar diameters D19 mm - D24 mm Drill diameter D15mm. 1 10058206 (21705) 1 set (8 pcs.) of external stops D18 mm for bar diameter D19 mm - D24 mm pre-machined. 1 12123486 Drill for drilling unit consisting of: 1 indexable insert drill D 15 mm 10 indexable inserts for steel 2 solid carbide drills D 8 mm

Condition: used, Danley Onsrud, model WT-2-1284A, 460V, 3 phase profile machine, S/N 797387-01, with push button controls, winning bidder responsible for proper disassembly and removal, includes table with assorted components, and hydraulic unit with 3 phase electric motor and 35" width x 12" height x 24" depth tank and coolant unit, also includes (1) skid of assorted parts, no other info available, winning bidder responsible for proper disassembly and removal, and capping of all wires. Nodpfexdddrsx Agzjlh

Year of construction: 2018, condition: ready for operation (used), Control Unit Brand HAAS Main Drive Spindle speed range 2400 rpm Spindle motor power 40 hp Number of axis 2 Nledpfx Agexp Sl Ujzoh Tail Stock Pinol tool taper MT5 Media Chip conveyor Yes Additional Equipment Line Filter & Surge Suppressor – 220 VAC, 3-phase, 80 A, 60 Hz Early Power-Failure Detection Module Belt-Type Chip Conveyor This HAAS ST-40 was manufactured in 2018. It features a 15-inch chuck, a maximum part swing of 35.5 inches, and a cutting diameter of 30 inches. The machine includes a 2-speed gearbox spindle, capable of 2,400 rpm, and a 12-station BOT turret. Additional equipment includes a belt-type chip conveyor and a programmable servo tailstock. Consider the opportunity to buy this HAAS ST-40 horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: used, machine/vehicle number: 007328, X axis working area: 3200 mm Y axis working area: 1850 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Nsdoxmgybopfx Agzolh Number of controlled axes: 3 axes Total number of drilling spindles: 31 Total number of tool changer positions: 10

Condition: new, functionality: fully functional, Year of construction: 2024, machine/vehicle number: 50, laser power: 12,000 W, cutting speed: 100 mm/min, workpiece weight (max.): 1,500 kg, total length: 260,000 mm, warranty duration: 60 months, working range: 715 mm, Equipment: cooling unit, HSG Laser | TX 3+1 Heavy-duty Tube Fiber Laser Cutting Machine Size: 7026mm, 9032mm, 12036mm, 12050mm Laser source power: 3000 - 12000W Cutting Capacity: Round tube: Φ15-500 (TL Φ15-715); Square tube: □15*15 - 350*350 Rectangular diagonal ≤ 500mm Optional function: automatic loading and unloading system Njdpfsrtiirex Agzjlh 3+1 Twin-chucks Clamping Cutting Technique

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25653, Equipped with: -Automatic Central Lubrication System -Machine Guard -Indramat - MTX and Sercos CNC Control -The standard machine is equipped with CNC-control make Indramat - MTX and SERCOS-interface -Tool Dressing (Automatic dressing cycle of the dressing master and honing wheel tip diameter by a diamond coated dressing roll. The dressing cycle of workpieces can be pre-selected) -Electronic Indexing Unit -Operator and Maintenance Manual -All Electrical Drawings -PLC Language in English -Software and Hardware for Remote Diagnosis -High Precision Control of the Stock Allowance Material -Manual Loading on Spindle for Prototypes -Software for Infeed Optimized Cycle Type Reduction (Adaptive Honing) -Software for Vario Speed Dressing -Software for Calibration of Master Gears -Software for Timing Gears (including additional sensor for the hole of 4mm) -Software for Shortening of Workpiece Change-Over Time -Clamping Cylinder -RITTAL Cooling Unit -Lighting for Working Area -Installation of Vibration Detecting Sensors -Coolant Unit -Electrostatic Oil Mist Exhauster IFS With Rigid Piping -Internal Automation -Pallet Ring Conveyor System FlexLink (L-form shape see approved layout) -Parallel - Double Gripper -Pick and Placer Between Pallet Conveyor and Internal Loader -Extended Loading Length of the Pick and Placer Specifications: Workpiece: -Part Diameter: 20-150 mm -Maximum Face Width: 70 mm Nlsdpfow Iquyex Agzoh -Part Weight: 20 kg -Number of Teeth: 6-150 -Module: 1-5 mm Workpiece Spindle: -Maximum Speed: 6000 1/min -Installed Power: Approx. 25 kW Tool: -OD of Honing Wheel: 270 mm -Widths of Honing Wheel: 20-70 mm -Honing Wheel Material: Ceramics Tool Spindle: -Maximum Speed: 2000 1/min -Installed Power: Approx. 25 kW Machine: -Total Connected Load, Approx: 70 kVA -Floor Space (w x l x H): -Total Weight, Approx: 11 Ton -Bosch Rexroth MTX Control CML 85 Longitudinal Slide, Z-Axis: -Linear Drive -Drive Torque: 3,700 Nm -Infeed Speed: 60 m/min -Theoretical Infeed: 200 m/min -Drive Length, Maximum: 400 mm Cross Slide, X-Axis: -Linear Drive -Drive Momentum: 2,150 Nm -Infeed Speed: 60 m/min -Theoretical Infeed: 200 m/min -Drive Length, Maximum: 1050 mm Swiveling Axis, W-Axis: -AC-Servo Drive: 10,000 1/min -Setable Gear Transmission: i=5000:1 -Swiveling Angle: -90 Degrees / +16 Degrees Workpiece Spindle, C-Axis: -Direct Drive, Maximum RPM: 7,000 1/min -Drive Power: 30 kW -Drive Torque: 112 Nm -Digital Measuring System Tool Spindle, B-Axis: -Direct Drive (hollow spindle drive), Maximum RPM: 2000 1/min -Drive Power: 30 kW -Drive Torque: 150 Nm -Digital Measuring System

Condition: good (used), Year of construction: 2006, INDEX MS52C CNC Multi-Spindle Mfd. 2006 Control: Siemens 840D 6 Spindles 52mm Capacity Equipped as pictured Under power Nsdpfx Agjt Rkzwozjlh Knoll System Chip Conveyor Riedel Chiller 3.6 meter (12ft) IEMCA SIR Bar Feed SIR MS52/F Type 38 XL Mfd. 2005

Condition: used, machine/vehicle number: 006488, X axis working area: 2500 mm Y axis working area: 850 mm Main Electrospindle power: 5 KW Number of controlled axes: 3 axes Nodpfxowuclxe Agzelh Total number of drilling spindles: 11

Condition: good (used), Year of construction: 2001, Equipped with: Power Stock Fanuc 5-Axis CNC Control 160M 400mm Honing Wheel X Axis Pulse Generator Coolant System w/Twin Filters Magnetic Chip Separator Honing Tool Set up for Last Job is Still in Machine Internal Diameter of Honing Tool on Machine is 14" Work Light Power Door Auto Dress 5-Part Program Instruction Book for 16M Control Instruction Book for Set-Up and Operation Specifications: Maximum Outer Diameter: 250 (350) Minimum Outer Diameter: 30 Maximum Overall Length: 400mm Maximum Tooth Width: 45mm Module: 1.0-3.0 Cross Feed Device(Z Axis): 430mm Max. Travel Honing Wheel Cutting Feed Device(X Axis): 370 Max. Travel Honing Wheel Swing Device(C Axis): Swing Angle: +30 Degress Honing Wheel Rotation Drive Device(A Axis): Honing Wheel Spindle Speed R/Min: 500 Honing Wheel Outer Dia.: 300 (400) Maximum Honing Wheel Width: 50mm Crowning Device (Y Axis): Maximum Rocking Angle: 1.6 Degrees Motor Types: Z-Axis Drive Motor: 1.8Kw X-Axis Drive Motor: 1.8Kw Y-Axis Drive Motor: 0.7Kw C-Axis Drive Motor: 1.8Kw Nodpfxorualpo Agzjlh A-Axis Drive Motor: 2.2/3.7Kw Maximum Distance Between Centers: 600mm Center Height: 1,100mm Floor Space: 2,170W X 2,800D X 2,100H Mass Of Machine: 4,500Kg

Condition: used, machine/vehicle number: 007400, Max. panel width: 800 mm Max. panel length: 1250 mm No of injectors: 1 Nedpfot Hmt Isx Agzolh Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: good (used), Year of construction: 2013, TOYODA (JTEKT) GL32M-63 CNC UNIVERSAL CYLINDRICAL GRINDER Equipped with: CBN Grinding Wheel Flagging Steady Rest Workhead Mounted Rotary Dresser Marposs P3SE System Monitoring Toyoda In Process Gaging Marposs E20N Acoustic Controller Air Gap Eliminator Workpiece Collision Control Coolant Pumps W/Magnetic Separator Pendant Control RH Workhead with Center LH Workhead with Center Work Rests Worklight Light Curtains Stacklight Extra Wheels Specifications: -Grind Center to Floor: 1,000 mm -Swing Over Table: 320 mm -Distance Between Centers: 630 mm -Grinding Diameter Range: 10 - 150 mm -Floor Space (Base machine w/auxiliary equipment): 3,400 x 5,000 mm -Net Machine Mass (approx.): 10,500 kg Grinding Wheel: -Type: CBN Wheel -Wheel Size (OD): 350 mm -Maximum Wheel Width: 60 mm -Surface Speed: 120 m/s Wheelhead: -Spindle Bearing: TOYODA STAT Bearing -Slide: V and Flat -Feed System: Ballscrew -Rapid Feed (on diameter): 30 m/min -Minimum Incsrement (on diameter): 0.0001 mm Workhead: -Type: Dead Spindle -Work Speed (Max): 500 rpm -Center Taper: MT #4 Footstock: -Type: Hydraulic -Taper Compensation: Manual Nledpsrtrzpefx Agzjh -Maximum Center Retraction: 60 mm -Center Taper: MT #4 Motors: -Wheel Drive Motor: 15 kW, Belt-Drive -Wheelhead Feed Servomotor: 1.3 kW Tank Capacities: -Wheel Spindle Lubrication Oil: 80 L -Hydraulic/Lubrication Oil: 20 L

Condition: used, machine/vehicle number: 004922, Max. panel width: 250 mm Nlsdpfjg E Th Ssx Agzsh Max. panel length: 1500 mm No of Top Units: 2 Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 007564, X axis working area: 3700 mm Y axis working area: 1550 mm Working Table: Flat table Nedpoum H Eksfx Agzjlh Main Electrospindle power: 10 KW Number of controlled axes: 3 axes Total number of drilling spindles: 12 Total number of tool changer positions: 13

Condition: used, machine/vehicle number: 008014, Max. panel length: 1250 mm Lateral horizontal groups: yes Nljdowuz S Djpfx Agzoh

Condition: used, machine/vehicle number: 005796, X axis working area: 3700 mm Nlodpfx Aehwi U Togzjh Y axis working area: 1550 mm Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 10 Total number of tool changer positions: 8

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Y axis working area: 1650 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Nlodpfx Agswuz Ekezoh Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 16 Total number of tool changer positions: 16

Condition: used, machine/vehicle number: 008134, X axis working area: 5780 mm Y axis working area: 1930 mm Nedpfx Agew Idgiozslh Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 4 axes Total number of drilling spindles: 32 Total number of tool changer positions: 28

Condition: used, machine/vehicle number: 008144, X axis working area: 2500 mm Y axis working area: 1200 mm Working Table: Flat table Nodpsw Idf Sefx Agzelh Main Electrospindle power: 10 KW Number of controlled axes: 3 axes Total number of drilling spindles: 7 Total number of tool changer positions: 7