Used Drum Pump Compressed Air for sale (36,136)

Condition: excellent (used), Year of construction: 2016, operating hours: 23,511 h, functionality: fully functional, Water-cooled dryer Atlas Copco FD510 30.60 m³/min Nsdpfsx Sx U Dox Afzecl Year of manufacture: 2016

Condition: used, Year of construction: 1997, Technical details: content: 500 cbm capacity in bar: 11 operating pressure: 11 bar weight of the machine ca.: 0,23 t dimensions L x W x H: Ø 620 mm x 1800 mm Pressure tank Pressure vessel according to directive 87/404/EEC Mark of conformity TÜV NORD 2017 Stands on base frame = steel profile frame welded. Connecting pieces: 1/2" with locking valve; 1/2" with plug; 1" with manometer; 1" with plug Connecting piece 2x left/right 1" with hose connection Temperature range min./max.: -10°C / +50°C Equipment: Ceiling support pressure hose (inside Ø 20mm) length 4m Pressure reducer with adjustable double connection Ncodpfx Afju Nz S Eszjl *

Condition: used, Year of construction: 1994, Technical details: tank capacity: 150 l operating pressure: 11 bar dimensions L x W x H: Ø 550 mm x H: 1,2m weight: ca. 60 kg For sale as shown and described, as an unpressurised tank for a sale at low price. Condensation drain valve at the bottom with hand lever 2 connection pieces 1/2 inch Ncsdpju Nz Tisfx Afzsl 2 connection pieces on the ceiling side 2 inch with blind plugs Boiler/tank Ø 450 x 1000mm upright on tripod stand Temperature max. +50°C / min. 10°C pressure gauge *

Condition: excellent (used), Year of construction: 2013, KAESER TB19 compressed air refrigeration dryer, with energy-saving SECOTEC control system. Year of manufacture: 2013 Technical specifications: Ncjdpfowmxb Tex Afzol Flow rate: 2.10 m³/min Pressure dew point: 3°C Overpressure: 3 to 16 bar Ambient temperature: +3°C to +43°C Max. compressed air inlet temperature: +55°C Compressed air connection: G 1" Dimensions (W x D x H): 620 x 540 x 963 mm Weight: 108 kg Power supply: 230 V / 1 / 50 Hz Location: from stock, 54634 Bitburg - available immediately -

Condition: like new (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: HFT.130, cooling capacity: 139 kW (188.99 HP), type of input current: three-phase, type of cooling: water, ambient temperature (max.): 40 °C, ambient temperature (min.): -10 °C, input voltage: 400 V, total width: 1,096 mm, total length: 3,355 mm, total height: 2,205 mm, heating capacity: 139 kW (188.99 HP), Hitema International HFT.130 AIR TO WATER REVERSIBLE HEAT PUMP Cooling Capacity: 139kW Heating Capacity: 139kW Heat pump with 2 scroll compressors, R410A refrigerant, brazed plate evaporator/condenser, condenser/evaporator coil with copper tubes and aluminum fins, AC axial fans. IP54 protection rating, chillers suitable for outdoor installation Nodpjx E S Tyefx Afzscl Technical data sheet available on request

Condition: used, axle configuration: 3 axles, first registration: 10/2004, color: other, Year of construction: 2004, Empty weight: 5.570 kg Axle 1: left 6 mm right 11 mm Axle 2: left 5 mm right 11 mm Axle 3: left 12 mm right 12 mm We have the possibility to stack trailers!  Njdpfx Afjrlmxnezjcl

Condition: used, axle configuration: 3 axles, first registration: 08/2003, color: other, Year of construction: 2003, Axle 1: left 7 mm right 7 mm Axle 2: left 10 mm right 15 mm Axle 3: left 12 mm right 11 mm We have the possibility to stack trailers!  Ncedpfov Ib Dnjx Afzjl

Condition: used, axle configuration: 3 axles, first registration: 10/2004, color: other, Year of construction: 2004, Empty weight: 5.630 kg Nedpfjrlmvpjx Afzocl Axle 1: left 8 mm right 5 mm Axle 2: left 8 mm right 10 mm Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers! 

Condition: used, axle configuration: 3 axles, first registration: 10/2004, color: other, Year of construction: 2004, Empty weight: 4.500 kg Axle 1: left 7 mm right 13 mm Axle 2: left 5 mm right 9 mm Axle 3: left 8 mm right 12 mm We have the possibility to stack trailers!  Ncsdeqx Nzxepfx Afzel

Condition: good (used), Year of construction: 2014, machine/vehicle number: 1373, volume flow: 2,400 m³/h, pressure (max.): 14 bar, KAESER TH451 Nsdpfxovr D I Rs Afzecl SN: 1373 YEAR: 2014 CAPACITY: (kW) 5.9 OUTPUT: (m3min) 40 PRESSURE: (bar) 14

Condition: good (used), Year of construction: 1992, Compressed air tank, pressure vessel, pressure tank, compressed air vessel, pressure vessel, compressor tank, compressed air tank -Manufacturer: Zeidler & Uhl, vacuum container standing, galvanized -Contents: 455 L -Operating pressure: -0.6 bar / max. 16 bar -Accessories: including attachments see photos -Number: 2x containers available Ncsdpfowra H Isx Afzol -Price: per piece -Dimensions: 860/650/H1610 mm -Weight: 374 kg/piece

Condition: excellent (used), Year of construction: 2008, volume flow: 3,096 m³/h, pressure: 29 bar, overall weight: 560 kg, Equipment: type plate available, PROD. - ATLAS COPCO TYPE - FD860 S/N - APF135144 YEAR - 2008 POWER (kW) - 8.3 PUMP. (m3/min) - 35 Ncederivrpopfx Afzol CIS (bar) - 29

Condition: excellent (used), - Standard dimensions - Completely in stainless steel Nsdpetndgwefx Afzscl - Connections NW 50, DIN 11851, KM - Diaphragms in PTFE / Santoprene - Capacity : max. 465 l/min. (see photo - flow chart) Dimensions : - Length : approx. 400 mm - Width : approx. 280 mm - Height : approx. 550 mm - Pump overhauled - In very good condition

Condition: good (used), Compressed air filter, fine filter Ncjdjb A Ni Espfx Afzjl -Connection: 2" inch -Number: 3 filters available Price: per piece

Year of construction: 1975, condition: good (used), Compressed air breathing apparatus, respiratory protection -electric pump with emergency hand crank Nodpfjb A H Ntsx Afzscl -Distributor: with pressure gauge -Hose -Box -Handover: in its current condition as inspected -Weight: 100kg

Year of construction: 1975, condition: used, Compressed air breathing apparatus, respiratory protection -Handover: in its current condition as inspected -electric pump with emergency hand crank -Distributor: with pressure gauge Ncsdpfx Afob A Hi Djzel -Hose -Box -Weight: 100 kg

Condition: not inspected (used), DÜRR Type: DÜRR 1C gluing system Nodpfjrdyb Aex Afzocl Dürr 1C gluing machine with drum pump, dosing unit and heated hose (approx. 5m). Technical description of the machine: Condition of the system Barrel pump, delivery hoses, dosing unit etc. are contaminated with old glue and must be cleaned or replaced. and must be cleaned or replaced. The machine has approx. 20 operating hours. Machine was used in a research facility. Year of construction 2017 Air inlet pressure max 6 bar Dimensions: approx. 1.5x1x1.5 meters 1 DÜRR adhesive control unit (110017040) 1 single barrel pump (110014004) Weight: approx. 300 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 1998, Compressed air tank, pressure vessel, pressure tank, compressed air boiler, pressure vessel, compressor tank -Manufacturer: Mechanical and container construction, standing compressed air container -Content: 3000 l -Operating pressure: 11 bar -Accessories: including attachments, see photos Nedpfxephun Ej Afzocl -Dimensions: Ø 1475 x 2760 mm -Weight: 700 kg

Condition: new, -User-friendly operating concept -Efficient design for cost-effective and safe operation -Cooling fan speed-controlled from 0-100%, thus eliminating the need for the usual pressure switch and thermostat for fan control -Fewer wearing parts while maintaining a constant pressure dew point -Control system displays five different alarm states and stores them in memory -Refrigeration compressor shuts off below 15°C ambient temperature if no compressed air is flowing through -Clear layout and easy accessibility of all maintenance components -With built-in automatic condensate drain The advantages at a glance -High cost-effectiveness -Excellent price-performance ratio -No unnecessary compressed air losses thanks to the integrated electronic condensate drain -Connected tools and machines are optimally protected -User-friendly operating concept Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Ncjdpfx Aou T Hrvofzol Gewerbestraße Ost 6, 4921 Hohenzell, Austria - Air flow rate l/min: 1200 l/min - Air flow rate m³/h: 72 m³/h - Maximum pressure: 16 bar - Air connection: 1/2" - Power consumption: 0.2 kW Dimensions and weights: - Length (product) approx.: 325 mm - Width/depth (product) approx.: 430 mm - Height (product) approx.: 445 mm - Net weight approx.: 24 kg

Condition: good (used), Oil filling station, compressed air pump for fresh oil, remote oiling apparatus, oil dispensing device, oil filling device, oil transfer pump, gear oil pump, hydraulic oil pump, centrifugal gear oil pump -operated: pneumatically -Reel -Hose: 6 m - Manual valve with flow indicator -Number: 3x pumps with reel available Price: per piece -Weight: 60 kg/piece Ncedpfx Asb A Hzxefzjl

Condition: new, Graco Monark 222839 Series H07A Air-Powered Pump with 222791 Air Motor , serial no. according to photo ,unused in original opened box, 100% working Ncsdpji Eaclsfx Afzjl

Condition: used, This listing is for a Charles Austen Pump Dymax 14 Diaphram Specifications Maximum Flow, l/min - 14 Maximum Pressure - 2.0 bar / 29.0 psi Maximum Vacuum, mbar - 240 Voltage Options - 230V AC (50hz) 110V AC (50/60hz), 230V AC (50hz) Dims, L x W x H, mm - 210 x 125 x 151 Ncsdpfx Afoxzh Dkszsl

Condition: excellent (used), Grinding drum (rubber air drum) Original product from KED, (Kurt Ehemann) -Condition: unused -Type: G 6 x 22.5 -consisting of: base body, rubber hose, air valve, 2 clamping caps for rubber hose -Diameter: 60 mm -Grinding length: 200 mm -Length of base body: 225 mm -Holding bore: 30 mm -Number: 14 available Price: per piece -Available: on request in other sizes: e.g. diameters 40 mm, 60 mm, 75 mm, 100 mm, 125 mm, 150 mm, 175 mm, 200 mm, 250 mm, 300 mm e.g. grinding length 100mm, 150mm, 200mm, 250mm, 300mm, 400mm, 500mm Nedob A S Rfspfx Afzscl Also available as brush grinding elements. Furthermore, we also carry general husband spare parts. Price of grinding drums is shown in the attached PDF file.

Condition: new, Year of construction: 2025, 500 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 500 L Pressure Vessel Ncjdpfx Afsxby D Aezjl Professional Pressure Design – made of high-grade 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliance with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with higher demands. Large Capacity – 500 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 6 connection ports with diameters of 1.1/4", 2", and 1/2" allow flexible integration with various installations. High-Quality Finish – durable anti-corrosion coating inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial environments. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is engineered for heavy-duty use in industrial settings. The body is made from 4 mm thick structural steel, ensuring resistance to pressures up to 11 bar and enabling long-term operation. All welds undergo strict quality control, and the tank surfaces are protected with a corrosion-resistant coating that withstands both chemical and atmospheric conditions. The tank includes a nameplate with the CE mark and the notified body number of UDT, confirming its approval for use in both Polish and European markets. The set comes with complete technical documentation, a pressure vessel passport, and material certificates. Precision and Efficiency – Stable Pressure and Optimized Compressor Operation Thanks to its large 500-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This ensures consistent operation of air-powered devices and significantly extends compressor lifespan by reducing the number of start-stop cycles. The vertical design allows for space-efficient installation, which is especially important in facilities with limited room. A properly matched tank helps minimize pressure drops and prevents pneumatic system overloads, resulting in greater efficiency and enhanced safety across the entire installation. Standard Equipment Connection Ports: 6 pcs – diameters: 1.1/4", 2", 1/2" Nameplate with CE Mark UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating

Year of construction: 2025, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Nodpfxjmt Dcfs Afzjcl Dew point temperature 3°C Efficiency 2800 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 420 x 700 x 690 mm Weight 37 kg Type and amount of refrigerant R134a, 550 g