Used Dry System for sale (41,784)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed and dimensioned according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feeding modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Crsdpfezw Apgox Aktji Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW thermal, installed electrical power 690 kW electrical. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow rate at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the outlet of the discharge duct and the dryer. The dryer is designed for an ambient temperature of up to -40°C; the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The furnace is NOT included in the offer; we only sell the belt dryer! The working level of the dryer is supported by steel columns approximately 8.00 m high and is enclosed with thermally insulating sandwich panels. A hall or other production components can be placed under and between the columns (see documents, steel structure). The system has been disassembled and stored by an experienced assembly team; this team can be arranged for transport and reassembly. Please note: We only sell this belt dryer without a furnace and no other parts! Please send your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: used, functionality: fully functional, This is a drying and disinfection system for boots and shoes manufactured by PHT, type HYGIfeet M5. The Hygifeet drying and disinfection system is the innovative solution for all communal areas. The system stores shoes and boots after use and disinfects and dries them simultaneously. Disinfection is carried out safely using ozone, thus eliminating the need for chemicals. Simultaneous drying is achieved through warm air, ensuring a short drying time. The ozone-warm air mixture is only released at the valve heads when boots are placed on them. In addition, the valve heads are ergonomically designed for optimal air circulation. Warm, dry boots increase the well-being of your employees and prevent diseases through disinfection. The device has been tested in our in-house workshop and is fully functional. Manufacturer's recommended retail price: €2,721 net = €3,238 gross Our special price: €1,210 net = €1,439 gross OUR USED EQUIPMENT SERVICE FOR YOU: 6-month warranty on all electrical parts High-quality branded equipment at fair prices Professional overhaul/inspection & expert cleaning Tested & fully functional - or money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 TECHNICAL DATA: External dimensions WxDxH: 360x470x1950mm Electrical connection: 230V, 50Hz, 0.55kW Serial number: 2892/22-60623 Year of manufacture: 2022 Capacity: 5 pairs of shoes Condition: Used, tested and fully functional SHIPPING: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Crjdpfx Aszxn Rfjktji Do you have any questions, would like to request advice, or would like to see something on-site? You can reach us by phone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. The sale is subject exclusively to our general terms and conditions (GTC).

Condition: used, functionality: fully functional, This is a boot and shoe drying and disinfection system from the manufacturer PHT, type HYGIfeet M5. The Hygifeet drying and disinfection system is an innovation for all communal areas. The system stores shoes and boots after use and disinfects and dries them simultaneously. The disinfection is carried out safely using ozone, thus consuming no chemicals. Simultaneous drying is achieved using warm air, which ensures a short drying time. The ozone-warm air mixture is only released at the valve heads when boots are placed on them. In addition, the valve heads are ergonomically shaped for optimal air circulation. Warm, dry boots increase the well-being of your employees and prevent diseases through disinfection. The device has been tested in our in-house workshop and is fully functional. Manufacturer's list price: €2,721 net = €3,238 gross Our special price: €1,210 net = €1,439 gross OUR USED EQUIPMENT SERVICE FOR YOU: 6-month warranty on all electrical parts High-quality branded equipment at fair prices Professional overhaul/inspection and expert cleaning Tested & fully functional - or money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 TECHNICAL DATA: External dimensions WxDxH: 360x470x1950mm Electrical connection: 230V, 50Hz, 0.55kW Serial number: 2893/22-60623 Year of manufacture: 2022 Capacity: 5 pairs of shoes Condition: Used, tested and fully functional Cjdpfxezxn Sio Akteri SHIPPING: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have any questions, would you like a consultation, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. The sale is exclusively subject to our general terms and conditions.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Codsq Nfuzepfx Aktori Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Condition: good (used), Year of construction: 2006, Capacity: 50 L \+ Hopper TORO-systems FG CK year 2014 Cedsz D Ti Iepfx Aktsri

Year of construction: 2003, condition: ready for operation (used), A complete central plastic granulate drying and conveying system Werner Koch, which was extensively expanded and modernized in 2021, is available. 1) Koch CKT 300 dry air dryer, year of manufacture: 2003, power: 41kW, air capacity: 300m³/h. 2) Koch CKT 500 dry air dryer, year of manufacture: 2021, power: 51kW, air capacity: 500m³/h, control system: Siemens S7. 3) 26x drying hoppers, volume: 11x40l, volume: 13x100l, volume: 2x150l. 4) 38x machine hoppers. 5) 2x Busch vacuum pumps. 6) Automatic Koch Navigator material distribution system, inputs: 26, outputs: 38. Including control cabinets and a central visualization and monitoring system Supervisione 9-7000. Documentation available. An on-site inspection is possible. Csdpfszmyl Dox Aktjri

Condition: new, Year of construction: 2014, functionality: fully functional, UNUSED TEMA INDUSTRIAL DRYING PLANT – FLUID BED DRYER – COMPLETE SYSTEM A complete "Industrial Drying Plant manufactured by TEMA Process B.V. (Netherlands)" is available for sale. The system is based on a Shaking Fluid Bed Dryer technology and was originally designed for drying industrial materials such as sludge, minerals, chemical feedstocks and other high-moisture industrial products. The equipment has never been installed or commissioned and has been stored since delivery. Operating hours: 0 This is not just a dryer, but a complete industrial drying plant including conveying, filtration and control systems. --- # General Information Manufacturer: TEMA Process B.V. (Netherlands) System type: Shaking Fluid Bed Dryer / Cooler Year of manufacture: 2014 Condition: Unused – Never installed – Stored since purchase --- # Capacity * Water evaporation capacity: approx. 2.1 t/h * Dryer feed capacity: approx. 12,000 kg/h * Final product output: approx. 1,900 kg/h --- # Moisture Range Feed moisture: 40 – 60 % Final moisture: 10 – 15 % --- Crsdpeyrxwwefx Aktji # Drying System * Shaking Fluid Bed Dryer with integrated cooling section * Drying air temperature: 120 – 250°C (nominal 190°C) * Direct fired natural gas air heater * Drying air flow: ~44,000 kg/h --- # Dryer Dimensions Fluidized bed area: 8.4 m² Dryer size: 7.3 m x 1.15 m --- # Energy Consumption Installed electrical power: ~218 kW Electrical consumption: ~160 kW Natural gas consumption: max. 190 Nm³/h --- # Scope of Supply (Complete Plant) The system includes the following equipment: Drying Unit * Shaking Fluid Bed Dryer / Cooler * Air supply system * Direct fired natural gas air heater * Recirculation fan * Combustion air fan * Cooling air fan --- Dust Separation and Filtration 2 Cyclone separators 1 Baghouse Filter Dust rotary valve Exhaust fan and ducting system 4 Explosion relief panels --- Material Handling System * Twin shaft paddle mixer * Granulator * Screw conveyors * Double screw conveyor * Bucket elevator * Product conveying system --- Automation and Control * MCC / PLC control system * Siemens S7-300 PLC platform * HMI operator panel * Upper control level ready for SCADA integration --- # Typical Applications The system can be used for drying various industrial materials including: * Industrial sludge * Minerals and mining products * Chemical raw materials * Recycling materials * Paper and pulp industry residues * Fertilizer and organic materials * Biomass and other industrial feedstocks --- Condition * Never installed * Never commissioned * Stored since delivery * Complete plant available --- Location Turkey The equipment can be inspected on site. Additional technical documentation and photos are available for serious buyers.

Year of construction: 2019, condition: like new (used), TM Norway Automatic Gas Cylinder Filling Carousel 200/300 bar For sale: professional, fully automatic gas cylinder filling carousel manufactured by TM Norway AS, Norway. Year: 2019 Project / Serial No.: PRJ-2018-02-13-0001 Crsdpfx Akj Ahhttjtoi CE marked This system is designed for the automated handling, preparation, filling, and control of high-pressure gas cylinders. It is suitable for industrial gas producers, cylinder filling plants, technical gas suppliers, welding gas companies, specialty gas producers, and other professional gas filling facilities. Main features: * Fully automatic 8-station carousel concept * Cylinder sizes approx. 5-50 liters according to TM Norway platform specifications * Designed for 200 and 300 bar applications * Suitable for single gases and gas mixtures * Automatic cylinder positioning and handling * Automatic valve orientation and adapter connection, depending on the configuration * Residual-pressure measurement * Automatic blow-down * Vacuum preparation * Automatic gas filling * Final pressure measurement * Automatic valve closing * Leak testing * Automatic adapter disconnection * Industrial PLC/HMI control * Rexroth control equipment * Siemens SIMATIC mobile panel * TROAX safety guarding with interlocks and emergency stops Possible gas applications, depending on the installed gas supply, adapters, software, and certification: Oxygen (O2), Nitrogen (N2), Argon (Ar), Carbon Dioxide (CO2), Helium (He), welding gases, shielding gases, industrial gases, technical gases, specialty gases, and mixed gases. The TM Norway carousel platform can support different cylinder valve connections, including DS, BS, DIN, AFNOR, CGA, and VIPR/integrated valves, depending on the installed adapters. This is not a simple manual filling manifold. It is an automated industrial cylinder filling system intended to automate several operations normally performed manually in a gas filling plant. Ideal for: Industrial gas plants, gas bottling plants, cylinder filling centers, oxygen filling plants, nitrogen filling plants, argon filling plants, CO2 filling plants, welding gas producers, mixed-gas plants, and gas plant integrators. Used industrial machine. The installation is available for inspection. The exact gas configuration, adapters, software, operating pressure, scope of supply, and recommissioning requirements must be verified for the buyer's intended application. Detailed technical PDF available upon request. Keywords: automatic gas filling carousel, gas cylinder filling machine, cylinder filling system, gas bottling plant, high-pressure gas filling, 200 bar, 300 bar, oxygen filling, nitrogen filling, argon filling, CO2 filling, helium filling, mixed gas filling, welding gas filling, industrial gas equipment, cylinder filling automation, TM Norway gas filling system. Kosan Crisplant gas filling, Kosan gas filling carousel, Siraga filling carousel, Pamasol filling machine, Pamasol gas filling, Rotarex gas filling system, Cryostar gas equipment, Linde gas filling equipment, AGA gas filling system, Messer gas filling plant, Air Liquide gas filling equipment, Air Products gas filling equipment, gas filling carousel alternative, automated cylinder filling alternative, industrial gas carousel, automatic cylinder filling carousel, high-pressure gas carousel, gas bottle filling carousel, gas bottle filling machine, compressed gas bottling machine, industrial cylinder filling equipment.

Condition: used, Ankom HCl Hydrolysis System with RD2 Dryer RDI Ankom HCl – Hydrolysis System Automatic system for the hydrolysis of fat samples of all types using filter bag technology. Fast method as a preparation step for solvent extraction of fat and oil samples. Hydrolysis of up to 15 samples simultaneously. Closed system. Automatic temperature control and rinsing. Total hydrolysis time, including rinsing, approx. 80 minutes. Microprocessor-controlled with LCD display. Includes RD dryer for the hydrolysis system. Credpfxeucvu Es Aktsi More items in other sizes – new and used – can be found in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 2003, Dry rack loading system for profiles Manufacturer: Makor Type: ACA Year of manufacture: 2003 Cedpfxjz Nky No Aktori Automatic rack loader at the end of the line for loading dry racks with painted profiles and strips Typical applications: Profile painting, strip production, coating lines for baseboards, decorative strips, and window strips Design: 4 positioning arms for short and long profiles up to approx. 5000 mm (arm spacing approx. 0 - 1600 - 2120 - 2550 mm) Paternoster rack width approx. 175 mm Basic concept: - Automatic transfer of the coated profiles from the end of the line to the dry racks - 4 positioning arms for different profile lengths - Can be used as the final stage of a profile coating line / board coating machine / strip spraying machine

Condition: like new (used), Year of construction: 2018, operating hours: 47 h, functionality: fully functional, Cold Jet i³ MicroClean – Compact Dry Ice Blasting Machine For sale: a used Cold Jet i³ MicroClean dry ice blasting machine, built in 2018 and with only 47 operating hours. The machine is fully functional and in very good condition. The i³ MicroClean is designed for precision dry ice cleaning. The optional DX pellet-shaving upgrade allows the machine to work with loose 3 mm pellets and dry ice nuggets. It can also be used with dry ice blocks. Machine details - Manufacturer: Cold Jet Cjdpfx Akjydpy Tstori - Model: i³ MicroClean - Year of manufacture: 2018 - Operating hours: 47 - Condition: Used, fully functional - DX pellet-shaving upgrade: Available for €2,000 - Dry ice capacity with DX: approximately 4 kg - Variable feed rate: 0–0.23 kg/min, depending on pellet or nugget size and condition - Air consumption: approximately 0.85–1.4 m³/min at 5.5 bar, depending on nozzle - Included: 20 ft blast hose, applicator, and nozzle - Warranty: 1 year 1 x 20' blast hose 1 x Coldjet applicator 1 x nozzle Worldwide shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice Cold Jet i³ MicroClean, Cold Jet i3 MicroClean, Cold Jet i³ MicroClean DX, Cold Jet MicroClean DX, Cold Jet dry ice blaster, dry ice blasting machine, dry ice blasting equipment, precision dry ice cleaning machine, compact dry ice blasting machine, dry ice pellet blaster, 3 mm dry ice pellet blaster, dry ice pellet-shaving machine, dry ice microparticle blasting machine, dry ice nugget blaster, industrial dry ice cleaning machine, low air consumption dry ice blaster, used Cold Jet machine, used dry ice blasting machine, dry ice cleaning equipment for sale.

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: lighting, Modern painting systems and drying rooms must meet higher requirements than just a few years ago. The use of new coating systems, such as hydro-based paints, polyurethane resins, and epoxy-zinc powder or epoxy-iron glitter paints, demands advanced paint room solutions. A key aspect is the workpiece transport to the painting system and further processing. Our engineers offer expert guidance, whether it's dry overspray removal, wet washing, air humidification, or air drying, condensation drying at low temperatures, or hot air drying. We also provide pre-treatment solutions such as high-pressure washing with water circulation systems or compressed air blasting or wheel blasting techniques. Key Components of a Modern Painting System: Painting Booth: The key element of our system, equipped with advanced air filtration and ventilation systems to ensure a dust-free environment for top-quality results. 🎨 Air Treatment: Essential for maintaining the air balance in the spray booth by drawing in filtered air to replace the air exhausted by the ventilation system. 🌬️ Exhaust System: Removes overspray and volatile organic compounds (VOCs) from the booth, ensuring good air quality and operator safety. 🌿 Drying & Curing Oven: After painting, parts are transferred to the oven to cure and obtain a durable, high-quality surface. 🔥 Conveyor System: An automated conveyor moves parts from the spray booth to the oven, ensuring efficiency and consistency. 🚜 Control Panel: The brain of the system, where the operator controls everything from ventilation to temperature and conveyor speed. ⚙️ Lighting: LED-based lighting provides excellent visibility while also offering energy savings. 💡 Why Choose Our Painting & Drying Systems: Quality: Carefully designed with advanced features to ensure greater efficiency and performance. 🎯 Safety First: Efficient exhaust systems, fire suppression, and fire-resistant materials ensure a safe working environment. 🛡️ Customization: We offer customizable solutions that cater to your specific needs and preferences. 🛠️ Easy Maintenance: Our systems are designed to be easy to maintain, with durable and easy-to-clean materials. 🔧 Excellent Support: Credpfxeun R Ufs Aktji We provide top-notch customer service and technical support for installation, troubleshooting, and optimal maintenance. 🧰 Environmental Responsibility: Our systems are designed to be energy-efficient and environmentally friendly, minimizing pollution and making them a sustainable choice for surface treatment. 🌍 Complete Solutions for Painting Systems: Conveyor Systems: Automated transport systems for painting and blasting booths, with intersections and switching systems for parts up to 2000 kg. 🚛 Easy-to-Replace Filters: Painting booths with ceiling exhausts and easy-to-replace filter elements. 🧹 Versatile Heating & Drying Solutions: Heating options include oil, gas, or electrical heating, as well as cross-flow heat exchangers and activated carbon filters for solvent-heavy processes. 🌡️ Integrated Paint Supply System: An integrated paint supply system with airless pumps for full coverage in the painting booth. 🎨 Our complete solutions provide everything you need for efficient and safe painting operations. Get in touch with our experts today to optimize your painting system!

Year of construction: 2019, condition: used, functionality: fully functional, Approximately 250 pieces in stock. Price per piece: 100 Euros. A mix of used and new items. Crjdpfxjy Uc Sfe Aktsi

Condition: used, This listing is for a Star Lab N2400-4002 Dry Bath System. The unit is in full working condition and is ready for immediate release. The Star Lab Dry Bath System N2400-4002 is a dual block dry bath system designed for various laboratory applications. It is part of the Star Lab Dry Bath System series, which offers great value and convenience for users. Key Features: Dual Block System: The N2400-4002 features two blocks, allowing for simultaneous heating of multiple samples. Digital Microprocessor Controller: The system is controlled by a digital microprocessor, ensuring precise temperature control. Temperature Range: The system can operate at temperatures ranging from 5 °C above ambient to 150 °C. Temperature Accuracy: The temperature accuracy is ±0.2 °C, ensuring reliable results. Timer: The system features a timer that can be set from 0 to 999 minutes. Safety Device: The system is equipped with a leak-proof heating chamber, ensuring safe operation. Power Consumption: The system consumes 200 W of power. Dimensions: The system measures 200 mm x 298 mm x 80 mm (W x D x H). Codpfx Akjxxzg Tjtjri Weight: The system weighs 2.8 kg. Applications: Heating and boiling Restriction digests Denaturing DNA Melting agar Coagulation studies In situ hybridisation Hot Start thermocycler reactions

Condition: used, UV drying system Totalisator operating hours 1484 The system was connected to a Heidelberg GTO 52 with LACO 52-Lackiersystem. Codpfx Akszr I U Dotori No direct connection to the pre-machines/devices is required. It is a used UV lamp ADNOS 04204B4 (current designation ADS 53-160) installed.

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry Crodjq Igyvspfx Aktei - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: new, total height: 3,500 mm, total length: 7,000 mm, total width: 4,000 mm, volume flow: 26,000 m³/h, warranty duration: 12 months, inner dimension height: 2,700 mm, inner dimension length: 6,900 mm, inner dimension width: 3,900 mm, working height: 2,700 mm, Equipment: cabin, documentation/manual, ⭐⭐⭐⭐⭐ (5.0) Customer Rating – Quality that convinces! ⚡ Top Service – Fast Delivery – Reliable Support ⚡ ✈️ Plus shipping costs – Shipping possible upon request ⏰ 48-hour EXPRESS DELIVERY possible after down payment! The standard delivery time varies depending on stock levels between 1 working day and approximately 15 weeks. 🔧 Please note: Additional options can extend the delivery time. 📩 Ask the seller in advance whether your chosen options are immediately available. 🛒 ►►► Buy now! ◄◄◄ 💸 Preserve liquidity – invest wisely! ✳️ We offer flexible financing options: ✔️ Hire purchase ✔️ Leasing ✔️ Warranty programs 📞 Contact us – we will find the best solution for your budget! ✨ Strong. Economical. Efficient. ✨ 📦 Immediately available in three standard sizes! 📌 Our three most common cabin sizes are usually in stock and available for short-term delivery. 📌 If larger painting areas are required, we can combine standard cabins in a modular way to create customized solutions – tailored to your space and process requirements! 🎨 PROTON WETLINE KKF-40-70-35 Top-class wet spray booth & drying system 📐 Technical data (internal / external): Length: 6900 mm / 7000 mm Width: 3900 mm / 4000 mm Height: 2700 mm / 3500 mm Air handling unit: 1350 x 2900 mm 🔧 Performance features: 🌬️ Vertical airflow over a full-surface ceiling air supply plenum – for even, dust-free painting 🚪 3-panel main door with viewing windows + service door with emergency locking in case of overpressure 💡 Shadow-free lighting, heat-resistant and compliant with standards ♻️ Recirculation system with controllable fresh air flap – fast heating to 60–80 °C in 8–15 minutes 🔇 Low-noise, high-performance fan with constant airflow (0.30 m/s) 🛡️ Slight overpressure reliably protects against dust ingress 🔥 Heating system & efficiency: Riello G20 burner Heating output: approx. 200,000 kcal/h Efficiency: up to 99 % High-temperature heat exchanger made of special steel 🧼 Filter technology at the highest level: ✅ Pre-filter (tear-resistant, up to 100 °C, DIN 53438-3 F1) Crjdpfxoipvulo Aktei ✅ Ceiling filter (EN 779: F5, polyester-coated) ✅ Floor filter (Paint Stop, G3, silicone-free) ✅ Activated carbon filter (DIN 24184, class G4) 🖥️ Intelligent control: Modern control panel for full control over ventilation, heating, lighting and safety – simple & compliant with standards 🖲️ Optionally available with touchscreen operation 🧱 Air handling units can be flexibly positioned – can be mounted to the right, left or rear of the cabin ➕ Optional equipment (at extra cost): 🪟 Panoramic door – fully glazed 🧱 Roof with additional insulation 🎨 Paint mixing station can be integrated 🌈 Color selection: Any RAL color possible (standard: blue, white, orange, red, gray) 💡 Ex-protected lighting (Exproof) 🌪️ Ex-protected fan (Exproof Fan) 🖥️ Touchscreen control ⚠️ The choice of special equipment can extend the delivery time. Please agree on your options with our sales team in advance. 🚧 Assembly costs are not included in the price. 📍 These depend on your location – we will gladly prepare an individual offer for you! ☀️ 2 YEAR WARRANTY – Better safe than sorry! ☀️ ⭐ Follow us for new offers & promotions! ⭐ PROTON Maschinenbau GmbH – Your partner for professional painting technology with over 40 years of experience.

Condition: like new (used), Year of construction: 2009, operating hours: 467 h, functionality: fully functional, Plow and play. Very low-hours, fully equipped mobile dry ice production plant: Total operating time for the pelletizer is 467 hours. The last full service was performed in 2026. Pelletizer * Mobile, containerized manufacturing system * "Production HUB with Triventek PE80 pelletizer, 80 kg/h" (Denmark), built into a portable container with lighting. * ISO CO2 tank, 8 m3, portable on a frame, manufacturer: Wessington Cryogenics Ltd, England. * 3 pieces of thermo containers, 200 kg capacity each. New price: €250,000 Cjdey R I Tmjpfx Akteri * All manufactured in 2009, but very little used. Mobile & Modular: Built directly into a 10-foot High Cube ISO shipping container, it can be easily transported to rugged or remote locations. Worldwide shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: used, Year of construction: 2019, Manufacturer: DJM Model: COEX 4 Year: 2019 Condition: Used Serial number: N500003 Stock number: 3365 Number of heads: 4 Capacity: max. 100 cycles/min. Product diameter: max. 60 mm Product temperature: -2 °C to +45 °C Belt width: 440 mm Belt length: 1920 mm Belt speed: 3 - 15 m/min. Power: 3 x 400V, 50Hz, 20kW Dimensions: 2030 x 1625 x 2281 mm Weight: 2500 kg For filled products. Credpfj Ah Ttysx Aktji

Condition: new, Year of construction: 2025, Ceetec A/S produces since 1970 wood painting machines in Norre Aaby, Denmark. According to the motto "keep it simple" all machines are reduced to necessary things combined with innovative technology where it makes sense for our customer. This makes our machines very long living but also very cost effective for the customer. Our innovative drying systems are available in longitudinal and transversal version and can be combined with all our painting machines. We can also add IR-stripes for faster drying apart from the hot air drying (heated by hot water). You are interested and want to see a line working? No problem, we will organize a visit at another customer for You. Crodpoffc Ufjfx Aktsi The machines will be configured and build according to the wishes of You. Delivery time on request. Do You have further questions? Please feel free to contact us whenever You want!

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 11/2018, loading space length: 135,000 mm, loading space width: 24,600 mm, loading space height: 26,800 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, wheelbase: 8,910 mm, color: white, Equipment: tail-lift, = Additional Options and Accessories = - Air suspension = Additional Information = Codpfxe Afhq Ns Aktjri General Information Year of construction: 2018 License plate: OR-80-RF Axle Configuration Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg; Steerable Weights Unladen weight: 8,290 kg Payload: 21,710 kg GVW: 30,000 kg Functional Features Tail lift: D'HOLLANDIA DHSMR.20, under-ride guard, 2000 kg Maintenance, History and Condition APK (Technical Inspection): valid until 12/2026 Technical condition: good Visual condition: good

Year of construction: 2011, condition: excellent (used), BURKLE PROCESS TECHNOLOGIES Düsentrockner-Anlage DURCHLAUFTROCKNER TRDUE 700 Nozzle Dryer System one-sided drying of various media on plane parts Crjdpjd R Sb Ijfx Aktoi parts can be heated by the built-in IR emitter

Condition: new, Volumes: available in 10 m³ or 20 m³ versions Product description: The Easyplan is a compact yet powerful drying system designed for drying softwood and hardwood, as well as for treating pallets and wood packaging to comply with ISPM-15 standards. It ensures complete phytosanitary compliance and consistently delivers high-quality drying results for a wide range of timber types. Installation takes less than one day, making it ideal for rapid deployment in small to medium-sized production facilities. The process is fully automatic – simply load the kiln and let the system manage the entire drying or heat treatment cycle. Crjdpjw Hfzasfx Aktoi Available heating options: Electric: 27 and 36 kW Gas: 200 kW gas burner Hot water/steam Wood stack size for EASYPLAN 10 and EASYPLAN 20: 4 m - 6 m 180 - 300 EPAL pallets Key benefits: Capacities of 10 m³ or 20 m³ to suit different production requirements Suitable for both softwoods and hardwoods ISPM-15 compliant pallet and wood packaging treatment, firewood drying Fully automatic drying process Quick installation in less than 24 hours Flexible heating options to match available energy sources

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Credpjv Si Szefx Aktsi Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 2012, Dryer TORO-systems GFK Capacity:50l Crjdpfez D Tw Eex Aktei